Analytical devices based on light-emitting diodes – a review of the state-of-the-art

A general overview of the development of the uses of light-emitting diodes in analytical instrumentation is given. Fundamental aspects of light-emitting diodes, as far as relevant for this usage, are covered in the first part. The measurement of light intensity is also discussed, as this is an essential part of any device based on light-emitting diodes as well. In the second part, applications are discussed, which cover liquid and gas-phase absorbance measurements, flow-through detectors for chromatography and capillary electrophoresis, sensors, as well as some less often reported methods such as photoacoustic spectroscopy.     

类石墨烯二硫化钼及其在光电子器件上的应用

由单层或几层二硫化钼构成的类石墨烯二硫化钼(graphene-like MoS₂)是一种具有类似石墨烯结构和性能的新型二维(2D)层状化合物, 近年来以其独特的物理、化学性质而成为新兴的研究热点. 本文综述了近年来类石墨烯二硫化钼常见的几种制备方法, 包括以微机械力剥离、锂离子插层和液相超声法等为主的“自上而下”的剥离法, 以及以高温热分解、水热法等为主的“自下而上”的合成法; 介绍了其常用的结构表征方法, 包括原子力显微镜(AFM)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和拉曼光谱等; 概述了类石墨烯二硫化钼的紫外-可见(UV-Vis)吸收、荧光发射等基本光物理性质及其相关机理; 总结了类石墨烯二硫化钼在二次电池、场效应晶体管、传感器、有机电致发光二极管和电存储等光电子器件领域的应用原理及其研究进展, 展望了这类新型二维层状化合物的研究前景.     

New applications of poly(arylene ether)s in organic light-emitting diodes

Compared with conventional π-conjugated polymers,poly(arylene ether)s(PAEs) may take advantages of excellent thermal properties,well-defined effective conjugated length and no catalyst contamination.Recently,their applications have been extended from engineering plastics to optoelectronic materials.In this review,various kinds of functional PAEs used as fluorescent polymers,host polymers and phosphorescent polymers in organic light-emitting diodes(OLEDs) are outlined,and their molecular design,synthesis and device performance are overviewed.     

Molecularly imprinted polymers (MIPs) combined with nanomaterials as electrochemical sensing applications for environmental pollutants

It is known that environmental pollution, which is the result of human-induced industrial, domestic, and agricultural practices, poses a threat to our planet. The increasing human population caused several problems such as water and air pollution, which have reached levels threatening human health. There are many different hazardous chemical and biological environmental pollutants in soil, air, and wastewater. It is extremely important to evaluate these health risks and detect these pollutants. The use of electrochemical methods for the detection of environmental pollutants comes to the forefront recently with advantages such as sensitivity, fast response, low cost, and practical use by miniaturization. The molecular imprinting technique is a popular method used for substance analysis by creating a cavity specific to the substance to be analyzed with the polymer used. The use of molecularly imprinted polymer in electrochemical methods and its modification with various nanomaterials bring advantages such as high selectivity, robustness, and sensitivity to electrochemical sensors. Here, the sensitive determination of environmental pollutants with different nanomaterial-modified molecularly imprinted polymer-based electrochemical sensors, the use of different polymerization techniques, and nano-sized modification agents in sensors are evaluated by reviewing recent studies in the literature.     

Photoinitiated polymerization of 1-(iodomethyl)benzene in the absence of catalyst and solvent

Linear polybenzyl oligomers and polymers are analogs of parapolyphenylenes, which are widely used as materials for displays production, in electrophotography, at production of lighting sources, photodetectors, sensors, fi eld-effect transistors, laser diodes, thermo resistant polymer materials [1, 2].     

Application of molecularly imprinted polymers for electrochemical detection of some important biomedical markers and pathogens

The determination of biomedical markers and pathogens using electrochemical sensors is a well-established technique in which the transducer and the recognition element are used to detect the target molecule. There is a growing interest in molecularly imprinted polymer (MIPs) applications as promising recognition elements. The use of MIPs as recognition elements in electrochemical sensors offers the advantages of being fast, low cost, and, at the same time, provides accurate and selective results compared with other commonly applied routine methods for biomedical markers and pathogen detection. Compared with other nanomaterials and aptamer-based biosensors, MIP-based sensors offered excellent selectivity for low-priced reagents to be used. The aim of the current review is to discuss the most recent applications of MIP-based electrochemical sensors (2019–2021) as promising detection devices for some important biomarkers, enzymes, and pathogens, such as viruses, bacteria, and toxins.     

石墨烯电子器件的研究进展

石墨烯是一种sp²杂化的平面类蜂窝型二维结构材料,特殊的结构赋予其许多优良的性能,如导电、导热性能好,载流子迁移率高和透射性好等,使其在电子器件领域表现出巨大潜力。 本文从石墨烯在三维集成电路中的应用、石墨烯场效应晶体管、石墨烯有机发光二极管及化学传感器四方面综述了石墨烯电子器件的研究进展及现状。     

聚合物发光电化学池

聚合物发光电化学池(polymer light-emitting electrochemical cell,PLEC)作为一种新型的聚合物发光二极管(polymer light-emitting diodes,PLED),它的本质特征是在PLED活性层掺杂电解质以提高活性层载流子传输能力,由于其具有对电极金属功函数不敏感和量子效率高等诸多优点而受到广泛关注。本文从活性层配方的改良、电极金属及基板的表面处理、相容性的改善、固定p-n结的实现和引入热处理手段等方面综述了近几年PLEC的研究进展,分析了当前PLEC在电致发光领域面临的问题,并对PLEC的前景进行了展望。     

Electrochemical Sensors,a Bright Future in the Fabrication of Portable Kits in Analytical Systems

Analysis of food, pharmaceutical, and environmental compounds is an inevitable issue to evaluate quality of the compounds used in human life. Quality of drinking water, food products, and pharmaceutical compounds is directly associated with human health. Presence of forbidden additives in food products, toxic compounds in water samples and drugs with low quality lead to important problems for human health. Therefore, attention to analytical strategy for investigation of quality of food, pharmaceutical, and environmental compounds and monitoring presence of forbidden compounds in materials used by humans has increased in recent years. Analytical methods help to identify and quantify both permissible and unauthorized compounds present in the materials used in human daily life. Among analytical methods, electrochemical methods have been shown to have more advantages compared to other analytical methods due to their portability and low cost. Most of big companies have applied this type of analytical methods because of their fast and selective analysis. Due to simple operation and high diversity of electroanalytical sensors, these types of sensors are expected to be the future generation of analytical systems. Therefore, many scientists and researchers have focused on designing and fabrication of electroanalytical sensors with good selectivity and high sensitivity for different types of compounds such as drugs, food, and environmental pollutants. In this paper, we described the mechanism and different examples of DNA, enzymatic and electro‐catalytic methods for electroanalytical determination of drug, food and environmental compounds.     

New innovations in ionic liquid–based miniaturised amperometric gas sensors

Gas detection is an essential part of everyday life; for some applications, using sensors for toxic and hazardous gases can literally mean the difference between life and death. In this minireview, recent progress in amperometric gas sensing using miniaturised electrodes and devices is described. The focus is on the use of nonvolatile room-temperature ionic liquids (RTILs) as electrolytes, which possess inherent advantages such as wide electrochemical windows, high thermal and chemical stability, intrinsic conductivity and good solvating properties. Various different gases, electrodes and RTILs have been investigated in the strive towards new materials for improved gas sensors. The most recent developments using porous membrane electrodes, planar devices (e.g. screen-printed, thin-film, microarray and interdigitated electrodes) and the modification of these surfaces for improved sensitivity are described. RTILs have great potential to be used as electrolytes in amperometric gas sensors, with improved lifespan of the sensor in hot/dry environments and allowing miniaturisation of devices. However, it is clear that more understanding of their long-term operation and utility in real environments (e.g. background air, varying temperatures and humidity levels) is needed before their realisation in successful commercial devices.     

适配体传感器检测凝血酶的研究进展

适配体是通过指数富集配体系统进化技术(SELEX)筛选得到的,能与多种目标物质高特异性、高选择性结合的寡核苷酸序列.适配体因合成简单、稳定性高、设计多样化、修饰方便、成本低等优点被用作为识别探针,并与不同的转导技术相结合,构建了多种类型的适配体传感器,并借助纳米材料独特的光、电特性,提高适配体传感器的性能.凝血酶是一种...     

Sensing approaches on paper-based devices: a review

Paper has been present in the world of analytical chemistry for centuries, but it seems that just a few years back it was rediscovered as a valuable substrate for sensors. We can easily list some of the countless advantages of this simple cellulosic substrate, including mechanical properties, three-dimensional fibrous structure, biocompatibility and biodegradability, easiness of production and modification, reasonable price, and availability all over the world. Those characteristics make paper a first-choice substrate for disposable sensors and integrated sensing platforms. Nowadays, numerous examples of paper-based sensors are being presented in the literature. This review describes some of the most prominent examples classifying them by type of detection: optical (colorimetric, fluorescence, surface-enhanced Raman spectroscopy, and transmittance methods) and electrochemical (voltammetric, potentiometric, and conductivity-based methods). We take a closer look at recent advances in immunoassays fabricated on paper, excluding simple lateral flow tests assembled on nitrocellulose. This review also summarizes the main advantages and disadvantages of the use of paper as a substrate for sensors, as well as its impact on their performance and application, presents a short history of paper in analytical chemistry, and discusses fabrication methods and available sources of paper.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

Advances in application of sensors for determination of phthalate esters

Phthalates esters(PAEs) are extensively used as additives for polymers in plastic, particularly in polyvinyl chloride(PVC) and polyethylene terephthalate(PET). These compounds are not part of the polymer chains and can be released easily from products and migrate into beverages and foods that come into direct contact, causing environmental and human health impacts. Simple and rapid detection of such substances is of great significance for ensuring environmental food safety and consumer health. A...     

VOCs分子的半导体型传感器识别检测研究进展

具有体积小、功耗低、灵敏度高、硅工艺兼容性好等优点的金属氧化物半导体(MOS)气体传感器现已广泛地应用于军事、科研和国民经济的各个领域。然而MOS传感器的低选择性阻碍了其在物联网(IoT)时代的应用前景。为此,本文综述了解决MOS传感器选择性的研究进展,主要介绍了敏感材料性能提升、电子鼻和热调制三种改善MOS传感器选择性的技术方法,阐述了三种方法目前所存在的问题及其未来的发展趋势。同时,本文还对比介绍了机器嗅觉领域主流的主成分分析(PCA)、线性判别分析(LDA)和神经网络(NN)模式识别/机器学习算法。最后,本综述展望了具有数据降维、特征提取和鲁棒性识别分类性能的卷积神经网络(CNN)深度学习算法在气体识别领域的应用前景。基于敏感材料性能的提升、多种调制手段与阵列技术的结合以及人工智能(AI)领域深度学习算法的最新进展,将会极大地增强非选择性MOS传感器的挥发性有机化合物(VOCs)分子识别能力。     

桥连氧化钨纳米线的可控合成及气敏性质

The rapid development of industrialization has resulted in severe environmental problems. A comprehensive assessment of air quality is urgently required all around the world. Among various technologies used in gas molecule detection, including Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, mass spectroscopy (MS), electrochemical sensors, and metal oxide semiconductor (MOS) gas sensors, MOS gas sensors possess the advantages of small dimension, low power consumption, high sensitivity, low production cost, and excellent silicon chip compatibility. MOS sensors hold great promise for future Internet of Things (IoT) sensors, which will have a profound impact on indoor and outdoor air quality monitoring. The development of nanotechnology has significantly enhanced the development of MOS gas sensors. Among various nanostructures like nanoparticles, nanosheets and nanowires, the emergence of quasi-one-dimensional (q1D) nanowires/nanorods/nanofibers, with unique q1D geometry (facilitating fast carrier transport) and large surface-to-volume ratio, potentially act as ideal sensing channels for MOS sensors with extremely small dimension, and good stability and sensitivity. These structures have thus been the focus of extensive research. Among the various MOS nanomaterials available, tungsten oxide (WO_3-x, 0 ≤ x < 1) nanowires feature the characteristic properties (multiple oxidation states, rich substoichiometric oxides with distinct properties, photo/electrochromism, (photo)catalytic properties, etc.), and unique q1D geometry (single-crystalline pathway for fast carrier transport, large surface-to-volume ratio, etc.). WO_3-x nanowires have broad applications in smart windows, energy conversation & storage, and gas sensing devices, and have thus become a focus of attention. In this paper, the fundamental properties of tungsten oxide, synthesis methods and growth mechanism of tungsten oxide nanowires are reviewed. Among various (vapor-liquid-solid (VLS), vapor-solid (VS) and thermal oxidation) growth methods, the thermal oxidation method enables an in situ integration of WO_3-x nanowires on predefined electrodes (so-called bridged nanowire devices) via the oxidation of lithographically patterned W film at relatively low growth temperature (~500 ℃) because of interfacial strain, defects and oxygen on the surface of the W film. The novel bridged nanowire-based sensor devices outperform traditional lateral nanowire devices in terms of larger exposure area, low power consumption via self-heating, and greater convenience in device processing. Recent progress in bridged WO_3-x nanowire devices and sensitive NO_x molecule detection under low power consumption have also been reviewed. Power consumption of as low as a few milliwatts was achieved, and the detection limit of NO₂ was reduced to 0.3 ppb (1 ppb = 1 × 10^-9, volume fraction). In situ formed bridged WO_3-x nanowire devices potentially satisfy the strict requirements of IoT sensors (small dimension, low power consumption, high integration, low cost, high sensitivity, and selectivity), and hold great promises for future IoT sensors.     

基于导电聚吡咯生物电化学传感器的研究进展

导电聚合物具有良好的导电性能,可以作为分子导线使电子在生物活性物质与电极间直接传递,是构建生物传感器的一种新型材料.聚吡咯(PPy)具有导电性、生物相容性、易固定等特点,在传感器中用于固定生物活性物质有着良好的应用前景.该文简要介绍了导电聚吡咯的合成方法及掺杂机理,重点评述了聚吡咯用于固定生物活性物质构建生物传感器的多...     

Optical sensors and biosensors based on sol-gel films

The sol-gel technology is being increasingly used for the development of optical sensors and biosensors, due to its simplicity and versatility. By this process, porous thin films incorporating different chemical and biochemical sensing agents are easily obtained at room temperature, allowing final structures with mechanical and thermal stability as well as good optical characteristics. In this article, an overview of the state-of-the-art of sol-gel thin films-based optical sensors is presented. Applications reviewed include sensors for determination of pH, gases, ionic species and solvents, as well as biosensors.     

Development of Optical Sensors Based on Luminescent Transition-Metal Complexes

Luminescence-based optical sensors are becoming increasingly important particularly in the area of fibber optic sensors. Most luminescence sensors detect analyses based on the change in luminescent intensity or excited-state lifetime of the sensing material as a function of analyst concentration. Luminescent materials with long excited-state lifetime are essential for the development of inexpensive sensors because it is much simpler and less expensive to measure lifetime in microseconds than in nanoseconds. Luminescent dyes with absorption in the visible region would allow the use of inexpensive light sources such as light emitting diodes (LEDs). Recent studies indicate that luminescent transition metal complexes, especially those with platinum group metals, have desirable spectral characteristics and features including long excited state lifetimes, high luminescence quantum yields and intense visible absorptions. They also tend to be thermally, chemically and photochemically robust. We have been investigating new luminescent sensor materials with the aims to understand the behaviour of luminescent materials in polymer and gel support and to develop new sensor materials with desirable properties.     

Methods for the determination of adenosine triphosphate and other adenine nucleotides

The following methods for the determination of adenosine triphosphate reported in the past 25 years are considered: bioluminescence methods with the use of the firefly luciferase enzyme (with sensitivity to 10^?14 M); chromatographic methods (ion-exchange, thin-layer, and high performance liquid chromatography) for the determination of adenine nucleotides in mixtures with other nucleotides, nucleosides, and nitrogen bases; and fluorescence, spectrophotometric, and electrochemical techniques (including those with the use of sensors), which are promising but not commonly used for the determination of adenine nucleotides. The advantages and disadvantages of these methods are demonstrated.