Stabile Bis(η-alkin)MCl2-komplexe; Darstellung und reaktivität

The synthesis and reactivity of {(η⁵-C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂} MCl₂ (M = Fe: 3a; M = Co: 3b; M = Ni: 3c) is described. The complexes 3 are accessible by the reaction of (η⁵-C₅H₄SiMe₃) ₂Ti(CSiMe₃)₂ (1) with equimolar amounts of MCl₂ (2) (M = Fe, Co, Ni). 3a reacts with the organic chelat ligands 2,2′-dipyridyl (dipy) (4a) or 1,10-phenanthroline (phen) (4b) in THF at 25°C to afford in quantitative yields (η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂ (1) and [Fe(dipy)₂]Cl₂ (5a) or [Fe(phen)₂]Cl₂ (5b). 1/n[Cu^IHal]_n (6) or 1/n[Ag^IHal]_n (7) (Hal = Cl, Br) react with {(η⁵ -C₅H₄SiMe₃)₂Ti(CCSiMe₃)₂}FeCl₂ (3a), by replacement of the FeCl₂ building block in 3a, to yield the compounds {(η⁵-C₅H₄SiMe₃)₂Ti(C CSiMe₃)₂}Cu^IHal (8) or {(η⁵-C₅H₄SiMe₃)₂Ti(CSiMe₃)₂}Ag^IHal (9) (Hal = Cl, Br), respectively. In 8 and 9 each of the two Me₃SiCC-units is η²-coordinated to monomeric Cu^I Hal or Ag^IHal moieties. Compounds 8 and 9 can also be synthesized by the reaction of (η⁵-C₅H₄SiMe₃)₂ Ti(CSiMe₃)₂ (1) with 1/n[Cu^IHal]_n (6) or 1/n [Ag^IHal]_n (7) in excellent yields. All new compounds have been characterized by analytical and spectroscopic data (IR, ¹H-NMR, MS). The magnetic moments of compounds 3 were measured.     

The lively chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes, analogues of surface reactions in heterogeneous catalysis

The chemistry of the di-μ-methylene-bis(pentamethylcyclopentadienyl-rhodium) complexes is reviewed. The complex [{(η⁵-C₅Me₅)RhCl₂}₂] (1a) reacted with MeLi to give, after oxidative work-up, blood-red cis-[{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂], 2. This has the two rhodiums in the +4 oxidation state (d⁵), and linked by a metal-metal bond (2.620 Å). Trans-2 was formed on isomerisation of cis-2 in the presence of Lewis acids, or by direct reaction of 1a with Al₂Me₆, followed by dehydrogenation with acetone. The Rh-methyls in [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)₂] were readily replaced under acidic conditions (HX) to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(X)₂] (X = Cl, Br or I); these latter complexes reacted with a variety of RMgX to give [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)₂] (R = alkyl, Ph, vinyl, etc.). Trans-2 also reacted with HBF₄ in the presence of L to give first [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(Me)(L)]⁺ and then [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(L)₂]²⁺ (L = MeCN, CO, etc.). The {(η⁵-C₅Me₅)Rh(μ-CH₂)}₂ core is rather kinetically inert and also forms a variety of complexes with oxy-ligands, both cis-, e.g. [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(μ-OAc)]⁺ and trans-, such as [(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(H₂O)₂]²⁺. The complexes [{(η⁵-C₅Me₅)Rh(μ-CH₂)}₂(R)L]⁺ (R = Me or aryl) in the presence of CO, or [{(η⁵-C₄Me₅)Rh(μ-CH₂)}₂(R)₂] (R = Me, Ph or CO₂Me) in the presence of mild oxidants, readily yield the C---C---C coupled products RCH=CH₂. The mechanisms of these couplings have been elucidated by detailed labelling studies: they are more complex than expected, but allow direct analogies to be drawn to C---C couplints that occur during Fischer-Tropsch reactions on rhodium surfaces.     

Synthesis and electrochemistry of organometallic ethanethiolato bridged complexes of ruthenium(IV)

Reaction of the ruthenium(IV) chloro-bridged dimer [{Ru(η³ : η³-C₁₀H₁₆)Cl(μ-Cl)}₂], 1, with ethanethiol (EtSH) in CH₂Cl₂ gives the bridged-cleaved adduct [Ru(η³ : η³-C₁₀H₁₆)Cl₂(SHEt)], 2. Stirring of two molar equivalents of 2 in methanol with one equivalent of 1 gives the binuclear, mixed chloro/thiolato bridged compound [{Ru(η³ : η³-C₁₀H₁₆)Cl} ₂(μ-SEt)], 3. The related doubly thiolato bridged complex [{Ru(η³ : η³-C₁₀H₁₀)Cl(μ-SEt)}₂], 4, is formed by treatment of 1 with an excess of EtSH, or by prolonged stirring of 2 alone in methanol. Compounds 2–4 have been studied by cyclic voitammetry. Compound 2 undergoes only irreversible oxidation, whereas in the case of both 3 and 4 the observation of significant return waves is consistent with a greater stability of the primary redox products.     

π-Olefin-Iridium-Komplexe : XXI. Synthese und Kristallstrukturen heterobinuclearer Komplexe mit wannenförmiger, synfacial gebundener η: η-Benzolbrücke

CpIr(η⁴-C₆H₆) (2) has been obtained in high yield by a four-step synthesis. Thermal reaction of 2 with CpCO(C₂H₄)₂ and photochemical reaction of 2 with CpRh(C₂H₄)₂ or CpRh(C₂H₄)₂ give the compounds μ-(η³: η³-C₆H₆)CoIrCp₂ (3), μ-(η³: η³-C₆H₆)RhIrCp₂ (4), and μ-(η³: η³-C₆H₆)(RhCp)(IrCp) (5), respectively. The X-ray crystallography data of 3 and 4 reveal a boat-shaped conformation of the synfacially bridging benzene ligand with a rather long Co---Ir bond distance in 3 and a relatively short Rh---Ir bond length in 4 which are caused by almost constant folding angles of the benzene unit. The dynamic behaviour of the benzene bridge was investigated by NMR spectrometry.     

Photochemical reactions of the isostructural 17- and 18-electron complexes (η-C5H5)M(Me)PPh3 (M=Co, Ni)

The photochemical reactions of the title complexes were studied in air-free benzene solution. In both cases photolysis leads to the production of complexes of the formula (η⁵-C₅H₅)M(PPh₃)₂. Both reactions are the result of the initial loss of a methyl radical from the excited state. The primary photoproduct, (η⁵-C₅H₅)MPPh₃ (M=CO, Ni), then scavenges neutral ligands from the solution to yield, in the case of PPh₃, (η⁵-C₅H₅)M(PPh₃)₂. In the absence of uncoordinated ligand in the reaction solution, the cobalt derivative reacts with the starting material to yield (η⁵-C₅H₅)Co(PPh₃)₂, a methyl radical and (η⁵-C₅H₅)Co(solvent)_n.     

Synthesis and X-ray crystal structures of [Ph2PMe2][(η-C5H4Bu)2Li] and [(η-C5H4Bu)2Yb(Cl)CH2P(Me)Ph2]

The interaction of [(η⁵-C₅H₄Bu^t)₂YbCl · LiCl] with one equivalent of Li[(CH₂) (CH₂)PPh₂] in tetrahydrofuran gave [Ph₂PMe₂][(η⁵-C₅H₄Bu^t)₂Li] (1) and [(η⁵-C₅H₄Bu^t)₂Yb(Cl)CH₂P(Me)Ph₂] (2) in 10% and 30% yields, respectively. 1 could also be prepared in 70% yield from the reaction of [Ph₂PMe₂][CF₃SO₃] with two equivalents of (C₅H₄Bu^t)Li. Both compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. The solid state structure of 1 reveals a sandwich structure for the [(η⁵-C₅H₄Bu^t)₂Li]⁻ anion.     

Diastereoselective synthesis of a resolved secondary arsine complex: asymmetric synthesis of (R-(−)589-ethylmethylphenylarsine

The reaction of [R-(R,R)]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(NCMe)]PF₆ with (±)-AsHMePh in boiling methanol yields crystalline [R-[(R)-(R,R)]-(+)_{589)-[(η⁵-C5H5){1,2-C6H4(PMePh)2}Fe(AsHMePH)}PF₆, optically pure, in ca. 90% yield, in a typical second-order asymmetric transformation. This complex contains the first resolved secondary arsine. Deprotonation of the secondary arsine complex with KOBu^t at −65°C gives the diastereomerically pure tertiary arsenido-iron complex [R-[(R),(R,R)]]-[((η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}FeAsMePh] · thf, from which optically pure [R-[(S),(R,R)]]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(AsEtMePh)PF₆ is obtained by reaction with iodoethane. Cyanide displaces (R)-(−)₅₈₉-ethylmethylphenylarsine from the iron complex, thereby effecting the asymmetric synthesis of a tertiary arsine, chiral at arsenic, from (±)-methylphenylarsine and an optically active transition metal auxiliary.     

Formation, solution structure and reactivity of alkylperoxo complexes of titanium

A detailed in situ ¹³C and ¹H NMR spectroscopic characterization of the following families of alkylperoxo complexes of titanium is presented: Ti(η²-OOtBu)_n(OiPr)_4−n, where n = 1–4; binuclear complexes [(iPrO)₃Ti(μ-OiPr)₂Ti(OiPr)₂(η²-OOtBu)] and [(η²-OOtBu)(iPrO)₂Ti(μ-OiPr)₂Ti(OiPr)₂(η²-OOtBu)]; complexes with β-diketonato ligands: Ti(LL)₂(OEt)(η²-OOtBu), Ti(LL)₂(OiPr)(η²-OOtBu), Ti(LL)₂(η²-OOtBu)₂, Ti(LL)₂(OtBu)(η¹-OOtBu), where HLL = acetylacetone, dipivaloylmethane. These alkylperoxo complexes could not be isolated due to their instability and were studied in situ at low temperatures. Whereas the side-on (η²) coordination mode of tert-butylperoxo ligand is generally preferable, the end-on (η¹) coordination caused by spatial hindrance from surrounding bulky ligands is found in two cases. The quantitative data on the reactivity of alkylperoxo complexes found towards sulfides and alkenes were obtained. The system TiO(acac)₂/tBuOOH in C₆H₆ was reinvestigated using ¹³C and ¹H NMR spectroscopy. The structure of the complex Ti(acac)₂{CH₃C(O)(OOtBu)COO} actually formed in this system was elucidated. Four types of titanium(IV) alkylperoxo complexes were detected in the Sharpless–Katsuki catalytic system using ¹³C NMR spectroscopy.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLVI. Organoeisen-Komplexe mit Selen-Brücken

The nucleophilicity of the bridging atom of the selenium complex (μ-Se)[(η⁵-C₅H₅)Fe(CO)₂]₂ (1) has been demonstrated by addition of the complex cation [(η⁵-C₅H₅)Fe(CO)₂]⁺: Reaction of 1 with the ionic complex [(η⁵-C₅H₅)Fe(CO)₂-(THF)][BF₄] cleanly yields the ionic trinuclear complex [(μ₃-Se)(η⁵-C₅H₅)-Fe(CO)₂₃][BF₄] (3). This addition reaction converts the bridging selenium atom from a bent FeSeFe structure into a flattened Fe₃Se pyramid (X-ray diffraction studies), without significant changes in the iron-selenium bond lengths (244.9(<1) pm and 242.7(1)/243.3(1)/244.8(1) pm, respectively). These bonds are considered to be single bonds in accord with the EAN rule.     

Group 3 and 4 metal alkyl and hydrido complexes containing a linked amido-cyclopentadienyl ligand: “constrained geometry” polymerization catalysts for nonpolar and polar monomers

In order to understand the nature of the putative cationic 12-electron species [M(η⁵:η¹-C₅R₄SiMe₂NR′)R″]⁺ of titanium catalysts supported by a linked amido-cyclopentadienyl ligand, several derivatives with different cyclopentadienyl C₅R₄ and amido substituents R′ were studied systematically. The use of tridentate variants (C₅R₄SiMe₂NCH₂CH₂X)²⁻ (C₅R₄=C₅Me₄, C₅H₄, C₅H₃^tBu; X=OMe, SMe, NMe₂) allowed the NMR spectroscopic observation of the titanium benzyl cations [Ti(η⁵:η¹-C₅Me₄SiMe₂NCH₂CH₂X)(CH₂Ph)]⁺. Isoelectronic neutral rare earth metal complexes [Ln(η⁵:η¹-C₅R₄SiMe₂NR′)R″] can be expected to be active for polymerization. To arrive at neutral 12-electron hydride and alkyl species of the rare earth metals, we employed a lanthanide tris(alkyl) complex [Ln(CH₂SiMe₃)₃(THF)₂] (Ln=Y, Lu, Yb, Er, Tb), which allows the facile synthesis of the linked amido-cyclopentadienyl complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(CH₂SiMe₃)(THF)]. Hydrogenolysis of the linked amido-cyclopentadienyl alkyl complex leads to the dimeric hydrido complex [Ln(η⁵:η¹-C₅Me₄SiMe₂NCMe₃)(THF)(μ-H)]₂. These complexes are single-site, single-component catalysts for the polymerization of ethylene and a variety of polar monomers such as acrylates and acrylonitrile. Nonpolar monomers such as -olefins and styrene, in contrast, give isolable mono-insertion products which allow detailed studies of the initiation process.     

The crystal structure of (η-C6Me6)Ti[(μ-Cl)2(AlClEt)]2 and the catalytic activity of the (C6Me6)TiAl2Cl8−xEtx(x = 0---4) complexes towards butadiene

The composition of (C₆Me₆)TiAl₂Cl_8−xEt_x complexes in (C₆Me₆)TiAl₂Cl₈ + n Et₃Al (n = 0.5-6) systems was studied by UV-Vis spectroscopy and the X-ray crystal structure of one of them, (η⁶-C₆Me₆)Ti[(μ-Cl)₂(AlClEt)]₂ (IIa-2), has been determined. The complex crystallizes in the orthorhombic space group Pna2₁ with Z = 4 and lattice parameters a 15.634(3), b 11.355(2), c 14.417(2) Å. The ethyl groups of IIa-2 reside in outer positions of aluminate ligands farther away from the C₆Me₆ ligand. The other part of the complex does not differ remarkably from structures of other (arene)Ti^II complexes. Negligible activity of (C₆Me₆)TiAl₂Cl₈ towards the butadiene cyclotrimerization is considerably increased by addition of 2.5–3.0 equivalents of Et₃Al. As follows from UV-Vis spectra, such systems contain mainly the (C₆Me₆)TiAl₂Cl₅Et₃ complex. It is suggested that the introduction of three Et substituents destabilizes the Ti-(η⁶-C₆Me₆) bond so that the replacement of hexamethylbenzene by butadiene in the first step of a catalytic cycle becomes more feasible.     

Structures of propionaldehyde, butyraldehyde, and pivalaldehyde complexes of the chiral rhenium fragment [(η-C5H5)Re(NO)(PPh3)]

The crystal structures of propionaldehyde complex (RS,SR)-(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₃)]⁺ PF₆⁻ (1b⁺ PF₆^s−; monoclinic, P2₁/c (No. 14), a = 10.166 (1) Å, b = 18.316(1) Å, c = 14.872(2) Å, β = 100.51(1)°, Z = 4) and butyraldehyde complex (RS,SR)-[(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHCH₂CH₂CH₃)]⁺ PF₆⁻ (1c⁺PF₆⁻; monoclinic, P2₁/a (No. 14), a = 14.851(1) Å, b = 18.623(3) Å, c = 10.026(2) Å, β = 102.95(1)°, Z = 4) have been determined at 22°C and −125°C, respectively. These exhibit C O bond lengths (1.35(1), 1.338(5) Å) that are intermediate between those of propionaldehyde (1.209(4) Å) and 1-propanol (1.41 Å). Other geometric features are analyzed. Reaction of [(η⁵-C₅H₅)Re(NO)(PPh₃)(ClCH₂Cl)]⁺ BF₄⁻ and pivalaldehyde gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(η²-O=CHC(CH₃)₃)]⁺BF₄⁻ (81%), the spectroscopic properties of which establish a π C O binding mode.     

Mechanism of formation of (η-C5H5)2NbH3 from the reaction of (η-C5H5)2NbCl2 with hydridoaluminate reducing agents

The mechanism of the transformation of (η⁵-C₅H₅)₂NbCl₂ to (η⁵-C₅H₅)₂NbH₃ by hydridoaluminate reducing agents has been investigated. Results suggest disproportionation of a niobium(IV) hydrite, leading to the trihydride product and a niobium(III) hydridoaluminate, (η⁵-C₅H₅)₂NbH₂AlR₂, which in turn is converted to the trihydride on hydrolysis. (η⁵-C₅H₅)₂NbH₂AlH₂ has been isolated; deuterium labelling shows that hydrogens exchange between ring and metal-bridging positions in this molecule.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLV. Eigenschaften und Reaktionsverhalten von Hydrogenchalkogenid-Komplexen der Metalle Chrom, Molybdän und Wolfram

Hydrogensulfido and hydrogenselenido complexes of general composition (η⁵-C₅R₅(CO)3M(EH) (R = H, CH₃; M = Cr, Mo, W; E = S, Se) react at the EH functions by deprotonation, bimolecular elimination of H₂E, or by loss of the chalcogen atoms E. Reactions with Lewis-acidic complex cations such as [((η⁵-C₅R₅)(CO)₃M]⁺ (R = H, CH₃; M = Mo, W) are useful for the synthesis of chalcogen bridged compounds (μ-E)[(η⁵-C₅R₅)(CO)₃M]₂. The heterodinuclear chalcogen bridge complexes thus generated form metathesis equilibria with their corresponding homodinuclear systems.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

The chemistry of compounds of the type Ru(η---C5Me4Et)(CO)2X (X=Cl, Br or I)

The title compounds react with unidentate ligands, L, containing either phosphorus or arsenic donor atoms to yield the corresponding compounds of the type Ru(η⁵---C₅Me₄Et)(CO)LX; with didentate phosphorus donor ligands the major species formed is the bridged complex {Ru(η⁵---C₅Me₄Et)(CO)X}₂{Ph₂P(CH₂)_nPPh ₂} n = 1, X = Br; n = 2, X = Cl). In contrast, unidentate ligands containing nitrogen donor atoms such as pyridine did not react with Ru(η⁵---C₅Me₄Et)(CO)₂Cl although reaction with 1,10-phenanthroline or diethylenetriamine yielded the ionic products [Ru(η⁵---C₅Me₄Et)(CO)L]⁺Cl⁻ (L = phen or (NH₂CH₂CH₂)₂NH). Reaction of Ru(η⁵---C₅Me₄Et)(CO)₂Br with AgOAc yielded the corresponding acetato complex Ru(η⁵---C₅Me₄Et)(CO)₂0Ac. Ru(η⁵--- C₅Me₄Et)(CO)₂X reacts with AgY (Y = BF₄ or PF₆) in either acetone or dichloromethane to give the useful solvent intermediates [Ru(η⁵---C₅Me₄Et)(CO)₂(solvent)]⁺Y⁻, which readily react with ligands L to yield ionic derivatives of the type [Ru(η⁵---C₅Me₄Et)(CO)₂L]⁺Y⁻ (where L = CO, NCMe, py, C₂H₄ or MeO₂CCCCO₂Me).     

The stereochemistry at silicon of an iron to cyclopentadienyl ligand silyl group migration in (η-C5H5)Fe(CO)2SiR3

The silyl group migration observed upon treating (R)(+)-(η⁵-C₅H₅)Fe(CO)₂-SiMePh(1-Np) with n-BuLi occurs with retention of configuration at silicon. The anion resulting from the migration, (η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Li, is alkylated with MeI to give (R)-(−)-(η⁵-C₅H₄SiMePh(1-Np))Fe(CO)₂Me (II). Compound II is independently prepared from (η⁵-C₅H₅)Fe(CO)₂Me. A concerted mechanism for the migration involving frontside nucleophilic attack at silicon is suggested.     

Substantial velocity dependence of rotationally inelastic collision cross sections in Li2—Xe

A Doppler-based velocity selection technique has been used to measure the relative velocity dependence of the cross sections σ_ji,Δ(ν_r) for rotationally inelastic collisions from level j_i to j_i + Δν₁ = 8,22,42) in ⁷Li^*₂ A ¹Σ⁺_u)—Xe. The σ_jν^±2(ν_r) are strongly attenuated at a smaller ν_r by “torque averaging” due to molecular rotation; in contrast, for large |Δ|, σ_jiΔ = ν_r⁻ⁿ (1 n 2). An empirical intermolecular potential which reproduces these types of behavior for 3-D classical trajectories is exhibited.     

New ferrocenyl heterometallic complexes of 2,7-diethynylfluoren-9-one

A new series of rigid-rod alkynylferrocenyl precursors with central fluoren-9-one bridge, 2-bromo-7-(2-ferrocenylethynyl)fluoren-9-one (1b), 2-trimethylsilylethynyl-7-(2-ferrocenylethynyl)fluoren-9-one (2) and 2-ethynyl-7-(2-ferrocenylethynyl)fluoren-9-one (3), have been prepared in moderate to good yields. The ferrocenylacetylene complex 3 can provide a direct access to novel heterometallic complexes, trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCPt(PEt₃)₂Ph] (4), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCPt(PBu₃)₂CCRCC(η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (5), [(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCAu(PPh₃)] (6) and [(η⁵-C₅H₅)Fe(η⁵-C₅H₄)CCRCCHgMe] (7) (R=fluoren-9-one-2,7-diyl), following the CuI-catalyzed dehydrohalogenation reactions with the appropriate metal chloride compounds. All the new complexes have been characterized by FTIR, ¹H-NMR and UV–vis spectroscopies and fast atom bombardment mass spectrometry. The solid state molecular structures of 3, 5, 6 and 7 have been established by X-ray crystallography. The redox chemistry of these mixed-metal species has been investigated by cyclic voltammetry and oxidation of the ferrocenyl moiety is facilitated by the presence of the heavy metal centre and increased conjugation in the chain through the ethynyl and fluorenone linkage units.     

An improved synthetic method and vibrational study of (pentamethylcyclopentadienyl) dicarbonylrhenium dihalides (η-C5Me5)Re(CO)2X2 (X = C1, Br and I)

An improved synthetic method has been found for the preparation of the pentamethylcyclopentadienyl rhenium dicarbonyldihalide complexes. From the reaction of (η⁵-C₅Me₅)Re(CO)₃ with Br₂ or I₂ in THF-H₂O a mixture of cis and trans isomers of (η⁵-C₅Me₅)Re(CO)₂X₂ X = Br and I is formed. On the other hand, the reaction of [(η⁵-C₅Me₅)Re(CO)₃C1][SbC1₆] in water gives the cis-(η⁵-C₅Me₅)Re(CO)₂C1₂ complex. The solid IR spectra of the dicarbonyldihalide complexes are recorded and an assignment of the normal modes in terms of local symmetry is suggested by comparison with those observed in analogous molecules. A normal coordinate analysis performed using a modified general valence force field and considering simplified models, confirms most of the experimental assignments. The set of valence force constants reflects the structure of the isomers under study.