Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Theoretical studies of microfluidic dispensing processes

The understanding of electrokinetic transport phenomena in microfluidic dispensers, an important component of biochips, is very important for designing and controlling biochips. A theoretical model to study the electrokinetic transport processes in microfluidic dispensers was developed in the work to study the controlling parameters for the dispensing process. The electrical field, the flow field, and the concentration field during dispensing processes were obtained by solving this theoretical model numerically. The effects of the electroosmotic mobility of the buffer solution, the diffusion coefficient and the electrophoretic mobility of the sample, the applied electrical field strength, and the channel size on the dispensing process are examined in this paper. The investigations show that optimal controlling parameter values can be found by using this model for dispensing any desired amount of the sample.     

Effects of organic modifiers on solute retention and electrokinetic migrations in micellar electrokinetic capillary chromatography.

Influences of seven organic modifiers, including urea, methanol (MeOH), dioxane (DIO), tetrahydrofuran (THF), acetonitrile (ACN), 1-propanol (1-PrOH) and 2-propanol (2-PrOH), on the solute retention and the electrokinetic migrations in micellar electrokinetic capillary chromatography (MEKC) are investigated with sodium dodecyl sulfate (SDS) micelle as pseudostationary phase. It is observed that in the limited concentration ranges used in the MEKC systems the effect of organic modifier concentration on the retention can be described by the equation logk1=logk1w-SC for most binary aqueous-organic buffer, but deviations from this retention equation are observed at ACN and particularly THF as organic modifiers. With parameter S as a measure of the elutropic strength, the elutropic strength of the organic modifiers is found to follow a general order urea 相似文献   

Cationic polymer coatings for design of electroosmotic flow and control of DNA adsorption

A difficulty with the design and operation of an electrokinetically operated DNA hybridization microfluidic chip is the opposite direction of the electroosmotic flow and electrophoretic mobility of the oligonucleotides. This makes it difficult to simultaneously deliver targets and an appropriate hybridization buffer simultaneously to the probe sites. In this work we investigate the possibility of coating the inner walls of the microfluidic system with hexadimentrine bromide (polybrene, PB) and other cationic polymers in order to reverse the direction of electroosmotic flow so that it acts in the same direction as the electrophoretic transport of the oligonucleotides. The results indicated that the electroosmotic flow (EOF) in channels that were coated with the polymer could be reversed in 1× TBE buffer or 1× SSC buffer. Under these conditions, the DNA and EOF move in the same direction, and the flow can be used to deliver DNA to an area for selective hybridization within the channel. The effects of coating the surface of a nucleic acid microarray with polybrene were also studied to assess non-selective adsorption and stability. The polybrene coating significantly reduced the extent of non-selective adsorption of oligonucleotides in comparison to adsorption onto a glass surface, and the coating did not alter the extent of hybridization. The results suggest that use of the coating makes it possible to achieve semi-quantitative manipulation of nucleic acid oligomers for delivery to an integrated microarray or biosensor.     

Electrophoretic mobility measurements of fluorescent dyes using on-chip capillary electrophoresis

We present an experimental study of the effect of pH, ionic strength, and concentrations of the electroosmotic flow (EOF)-suppressing polymer polyvinylpyrrolidone (PVP) on the electrophoretic mobilities of commonly used fluorescent dyes (fluorescein, Rhodamine 6G, and Alexa Fluor 488). We performed on-chip capillary zone electrophoresis experiments to directly quantify the effective electrophoretic mobility. We use Rhodamine B as a fluorescent neutral marker (to quantify EOF) and CCD detection. We also report relevant acid dissociation constants and analyte diffusivities based on our absolute estimate (as per Nernst-Einstein diffusion). We perform well-controlled experiments in a pH range of 3-11 and ionic strengths ranging from 30 to 90 mM. We account for the influence of ionic strength on the electrophoretic transport of sample analytes through the Onsager and Fuoss theory extended for finite radii ions to obtain the absolute mobility of the fluorophores. Lastly, we briefly explore the effect of PVP on adsorption-desorption dynamics of all three analytes, with particular attention to cationic R6G.     

Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles

Carbon nanoparticles obtained from the flame of an oil lamp were examined by means of capillary electrophoresis. The influence of buffer composition on the separation of the mixture of negatively charged carbon nanoparticles was studied by varying buffer selection, pH, and concentration. The electrophoretic pattern was affected by both the co- and counter-ion in the buffer solution, influencing selectivity and peak shape. The capillary electrophoretic separations at different pH revealed species with large electrophoretic mobilities under a wide range of pH. The mobility of selected species in the mixture of nanoparticles showed a strong dependence upon the solution ionic strength. The mobility of these nanoparticles as a function of ionic strength was compared to classical electrokinetic theory, suggesting that under the experimental conditions utilized, the species are small, highly charged particles with appreciable zeta potentials, even at low pH.     

Optimization of separation and migration behavior of cephalosporins in capillary zone electrophoresis

The influences of buffer pH, buffer concentration and buffer electrolyte on the migration behavior and separation of 12 cephalosporin antibiotics in capillary zone electrophoresis using three different types of buffer electrolyte, including phosphate, citrate, and 2-(N-morpholino)ethanesulfonate (MES), were investigated. The results indicate that, although buffer pH is a crucial parameter, buffer concentration also plays an important role in the separation of cephalosporins, particularly when cefuroxime and cefazolin, cephalexin and cefaclor, or cefotaxime and cephapirin are present as analytes at the same time. The electrophoretic mobility of cephalosporins and electroosmotic mobility measured in citrate and MES buffers are remarkably different from those measured in phosphate buffer. With citrate buffer, optimum buffer concentration is confined to a small range (35-40 mM), whereas buffer concentrations up to 300 mM can be used with MES buffer. Complete separations of 12 cephalosporins could be satisfactorily achieved with these three buffers under various optimum conditions. However, the separability of 12 cephalosporins with citrate or MES buffer is better than that with phosphate buffer. As a consequence of a greater electrophoretic mobility of cephalosporins than the electroosmotic mobility with citrate buffer at pH below about 5, some cephalosporins are not detectable. The cloudiness of the peak identification and of the magnitudes of the electrophoretic mobility of cefotaxime and cefuroxime reported previously are clarified. In addition, the pKa values of cephradine, cephalexin, cefaclor, and cephapirin attributed to the deprotonation of either an amino group or a pyridinium group are reported, and the migration behavior of these cephalosporins in the pH range studied is quantitatively described.     

Suppression of electroosmotic flow and its application to determination of electrophoretic mobilities in a poly(vinylpyrrolidone)-coated capillary

A hydrophilic polymer, poly(vinylpyrrolidone) (PVP), was employed for suppressing the electroosmotic flow (EOF). A capillary was filled with aqueous PVP solution for coating the capillary wall with PVP; the PVP solution was then replaced by a migration buffer solution containing no PVP. Three types of PVP with different molecular weights were examined. The EOF was suppressed more effectively as the molecular weight of PVP increased. The EOF in the coated capillary was approximately 10-fold smaller than that of a bare capillary and was constant in the pH range of 6-8. The suppressed EOF was stable even when no PVP was added to the migration buffer. However, the EOF increased significantly when sodium dodecyl sulfate was added into the migration buffer. The method was applied for determining the electrophoretic mobilities of inorganic anions that have negative electrophoretic mobilities larger than the electroosmotic mobility of the bare capillary. A novel method for determining the electrophoretic mobilities was proposed based on the linear relationship between electric current and electrophoretic mobility. The electrophoretic mobility was proportional to the electric current. Therefore, the intercept of the regression equation represents the electrophoretic mobility at room temperature. The electrophoretic mobilities were in good agreement with the absolute electrophoretic mobilities.     

Migration behavior and separation of benzenediamines, aminophenols and benzenediols by capillary zone electrophoresis

The migration behavior and separation of five benzendiamines, five aminophenols and three benzenediols were investigated in capillary zone electrophoresis. The results indicate that benzendiamines and aminophenols are optimally separated with a phosphate buffer at pH 5, whereas benzenediol isomers are best separated at pH about 12. The addition of surfactant monomers of tetradecyltrimethylammonium bromide to a phosphate buffer at pH 5 under the conditions of reversed electroosmotic flow is effective for separating these dye intermediates, except for the separation of 1,2-benzenediol from 1,3-benzenediol. The addition of sodium tetraborate as an electrolyte modifier is effective in the separation of 1,2-benzenediol from 1,3-benzenediol, but the latter comigrates with the 1,4-benzenediol isomer at pH 5.0. The electrophoretic mobility of ionized analytes can be described with Offord's equation, and the migration order depends on their ratios of charge to mass. In addition, the pKa values of these analytes in 50 mM phosphate buffer are reported.     

温度和缓冲溶液对胶束电动毛细管色谱的迁移时间窗口的影响

以电渗淌度、胶束电泳淌度和淌度比这3个参数为考察对象,研究了毛细管温度、缓冲溶液种类和浓度对胶束电动毛细管色谱的迁移时间窗口的影响。电渗淌度和胶束电泳淌度均随毛细管温度的升高线性的增加,粘度是这一影响中的主要因素。理论上证明了管壁表面的局部粘度与主体粘度不同。当温度变化时,电渗淌度和胶束电泳淌度的变化幅度不同。降低温度可以扩展迁移时间窗口,虽然扩展幅度较小,但在商品化仪器上易于实现。推导出能统一描述电渗淌度和胶束电泳淌度与缓冲溶液浓度间的关系式。     

Microchip micellar electrokinetic chromatography based on one functionalized ionic liquid and its excellent performance on proteins separation

Herein, one water-soluble functionalized ionic liquid (IL), 1-butyl-3-methylimidazolium dodecanesulfonate (BAS), was designed, investigated and successfully applied to microchip micellar electrokinetic chromatography (MEKC) construction. It possessed the properties of both IL and surfactant. A fairly stable pH value approximately 7.4, which was fit to pH values of general biological buffers, was nicely placed at the optimum concentration of 20mM BAS solution. While applying BAS solution as running buffer in poly(dimethylsiloxane) (PDMS) microfluidic systems, significantly enhanced electroosmotic flow (8-fold) and resolutions between analytes were obtained than that using other supporting electrolytes or surfactants. Pure BAS solution could conveniently complete the task of MEKC establishment: not only the ionic strength of the running buffer was guaranteed, but also the analytes adsorption to PDMS surface was conquered, as was demonstrated in the sensitive determination of fluorescent dyes and well-separated protein mixtures.     

Determination at ppb level of an anti-human immunodeficiency virus nucleoside drug by capillary electrophoresis-electrospray ionization tandem mass spectrometry

Capillary electrophoresis coupled with tandem mass spectrometry was used to indirectly separate and quantify the active metabolite of the anti-human immunodeficiency virus (anti-HIV) didanosine drug. The influence of several parameters (pH and ionic strength of volatile formic acid-ammonia buffer) upon electroosmotic flow, electrophoretic mobility and peak efficiency of several nucleosides (A, dA, ddA, C) has been studied. This paper illustrates the current importance in CE-MS technique as a complementary or substituted method to the known HPLC-radioimmunoassay or HPLC-UV method to measure levels of anti-HIV drugs. The limit of detection for 2',3'-dideoxyadenosine by this method is 2 microg 1(-1) in a formic acid-ammonia buffer (pH 2.5, 10 mM ionic strength).This methodology could be used to perform simultaneous detection of two or more anti-HIV nucleosides, such as stavudine or didanosine in combination therapy.     

毛细管电泳分离I^—和IO3^—中的电渗流的控制与调节

毛细管电泳分离是基于带电粒子在电场下的电动现象，当电场加到带电粒子所处的介质上时，存在电泳和电渗两种电动现象，其中电泳与带电粒子的大小、电荷和形状有关，而电渗与毛细管的表面及电泳介质的组成有关．由于电渗流能显著地影响分析时间和分离效率，因此，控制电渗流在毛细管电泳分离中是一个重要的环节［‘·‘j．此外，调节PH值、离子强度和缓冲液的粘度也是常用的控制电渗流的方法［’j．Ewing［‘与1入一个附加电场来控制电渗流．在缓冲液中加入足够浓度的阳离子表面活性剂将改变电渗流的方向．与通常的电渗流相比，人们对反向…     

Discontinuous electrokinetic chromatography of parabens using different substituted resonances as pseudostationary phases

Resorcarene derivatives, negatively charged even at moderate pH, were synthesized and employed as pseudostationary phases to achieve mobilities exceeding that of the electroosmotic flow. Under these conditions, a discontinuous electrolyte system was developed which allows the separation of four uncharged homologous 4-hydroxybenzoic esters (parabens) within a zone of resorcarene electrolyte, and the detection of these UV active compounds in a resorcarene-free zone, free from the high UV background absorbance of the resorcarenes. Resorcarenes, with differently charged functionalities (carboxylate and phosphate groups) to provide the electrophoretic mobility and with alkyl residues of different chain lengths responsible for the chromatographic interactions with the analytes, were tested and compared in terms of mobility and selectivity. Only the resorcarene phosphates exhibited sufficient mobilities at low pH exceeding the mobility of the electroosmotic flow (EOF). Retention factors of the parabens were found to increase with increasing chain length of the alkyl residues attached to the resorcarene. However, maximum selectivity was observed for an intermediate chain length (C8). An equation for the calculation of retention factors in discontinuous electrokinetic chromatography (EKC) is presented.     

Electrokinetic trapping and concentration enrichment of DNA in a microfluidic channel

We report a simple and efficient method for enriching the concentration of charged analytes within microfluidic channels. The method relies on exerting spatial control over the electrokinetic velocity of an analyte. Specifically, the electroosmotic (eo) velocity of the buffer solution in one region of the microfluidic system opposes the electrophoretic (ep) velocity of the analyte in the other region. This results in ep transport of DNA to the location where the ep and eo velocities are equal and opposite. Accumulation of the analyte occurs at this location. This enrichment method is conceptually distinct from field-amplification stacking, isotachophoresis, micelle sweeping, size exclusion, and other methods that have been previously reported. The method requires no complex microfabricated structures, no special manipulation of the solvent, and the enriched analyte remains in solution rather than being captured on a solid support. A concentration enrichment factor of 800 can be achieved for 20mer DNA in a fluidic channel having dimensions of 100 mum x 25 mum x 5 mm. The time required to achieve this level of enrichment is 300 s, and the enriched zone has a minimum width of 100 mum.     

Evaluation of capillary electrophoresis for the analysis of nicotine and selected minor alkaloids from tobacco

Summary Difficulties encountered in the gas or liquid chromatographic analysis of nicotine and other alkaloids in tobacco are largely due to the ionic character of these compounds. The potential of using capillary electrophoresis (CE) as an alternative analytical tool to eliminate these problems was evaluated. Parameters including electroosmotic flow, ionic forms of the analytes, buffer composition and applied voltage were studied using nicotine as a model compound. Ionic forms and electrophoretic mobility, as well as UV absorbance, of nicotine were controlled by varying the pH of an aqueous buffer solution. Thus the separation was optimized based on the characters of alkaloids and the nature of capillary electrophoresis. For tobacco samples in which nicotine accounts for more than 98% of the total alkaloid content, a quick method for the determination of nicotine in an aqueous tobacco extract within 100 seconds can be achieved.     

Characterization of SU-8 for electrokinetic microfluidic applications

The characterization of SU-8 microchannels for electrokinetic microfluidic applications is reported. The electroosmotic (EO) mobility in SU-8 microchannels was determined with respect to pH and ionic strength by the current monitoring method. Extensive electroosmotic flow (EOF), equal to that for glass microchannels, was observed at pH > or =4. The highest EO mobility was detected at pH > or =7 and was of the order of 5.8 x 10(-4) cm(2) V(-1) s(-1) in 10 mM phosphate buffer. At pH < or =3 the electroosmotic flow was shown to reverse towards the anode and to reach a magnitude of 1.8 x 10(-4) cm(2) V(-1) s(-1) in 10 mM phosphate buffer (pH 2). Also the zeta-potential on the SU-8 surface was determined, employing lithographically defined SU-8 microparticles for which a similar pH dependence was observed. SU-8 microchannels were shown to perform repeateably from day to day and no aging effects were observed in long-term use.     

Deconvolution of electrokinetic and chromatographic contributions to solute migration in stereoselective ion-exchange capillary electrochromatography on monolithic silica capillary columns

A monolithic silica stationary phase functionalized with an enantioselective strong cation exchanger based on an aminosulfonic acid derivative was used for chiral separations of basic test solutes by nonaqueous CEC and capillary LC. The effects of the applied electric field as well as the ionic strength in the eluent on electrokinetic and chromatographic contributions to the overall separation performance in the electrically driven mode were investigated. Hence, under the utilized experimental conditions, i. e., at an electric field strength in the range of approximately 120-720 V/cm (applied voltages 4-24 kV) and an ionic strength of the counterion between 5 and 25 mM (at constant acid-to-base, i. e., co- to counterion ratio of 2:1), no deviations from the expected linearity of the EOF were observed. This led to the conclusion that an occurrence of the so-called electrokinetic effects of the second kind resulting from electric double layer overlap inside the mesopores of the monolithic stationary phase and concentration polarization phenomena were largely negligible. Additional support to this conclusion was inferred from the observed independence of CEC retention factors on the electric field strength across the investigated ionic strength range of the BGE. As a consequence, a simple framework allowing for calculation of the CEC mobilities from the individual separation contributions, viz. electroosmotic and electrophoretic mobilities as well as retention factors, could be applied to model CEC migration. There was a reasonable agreement between calculated and experimental CEC mobility data with deviations typically below 5%. The deconvolution of the individual contributions to CEC migration and separation is of particular value for the understanding of the separation processes in which electrophoretic migration of ionic sample constituents plays a significant role like in ion-exchange CEC and may aid the optimization procedure of the BGE and other experimental conditions such as the optimization of the surface chemistry of the stationary phase. In combination with the remarkable column performance evident from the low theoretical plate heights observed under CEC conditions for all test solutes (3.5-7.5 microm in the flow rate range of 0.4-1.2 mm/s, corresponding to (130,000-300,000 plates per meter), the presented framework provides an attractive tool as the basis for the assessment of chromatographic selectivities in a miniaturized CEC screening of new selectors and chiral stationary phases (CSPs), respectively, from experimental CEC data and known CE mobilities.     

A separation carrier in high-speed proteome analysis by capillary electrophoresis.

We obtained a high-efficiency separation carrier for proteome analysis by capillary electrophoresis. The addition of curdlan or laminaran to the run buffer hastened the migration time without any degradation in resolution. We propose that for the development of the separation carrier it is necessary to synthetically analyze each of the following mobility factors of electroosmotic flow: buffer ionic strength, additional disturbance and adsorption. The total analysis for buffer and additive will be useful for designing high-throughput screening (HTS) systems for proteome analysis without annoying adsorption.     

Mechanism of sequence-based separation of single-stranded DNA in capillary zone electrophoresis

Separation of DNA by length using CGE is a mature field. Separation of DNA by sequence, in contrast, is a more difficult problem. Existing techniques generally rely upon changes in intrinsic or induced differences in conformation. Previous work in our group showed that sets of ssDNA of the same length differing in sequence by as little as a single base could be separated by CZE using simple buffers at high ionic strength. Here, we explore the basis of the separation using circular dichroism spectroscopy, fluorescence anisotropy, and small angle X-ray scattering. The results reveal sequence-dependent differences among the same length strands, but the trends in the differences are not correlated to the migration order of the strands in the CZE separation. They also indicate that the separation is based on intrinsic differences among the strands that do not change with increasing ionic strength; rather, increasing ionic strength has a greater effect on electroosmotic mobility in the normal direction than on electrophoretic mobility of the strands in the reverse direction. This increases the migration time of the strands in the normal direction, allowing more time for the same-length strands to be teased apart based on very small differences in the intrinsic properties of the strands of different sequence. Regression analysis was used to model the intrinsic differences among DNA strands in order to gain insight into the relationship between mobility and sequence that underlies the separation.