Low‐temperature relaxation of polymers around doped dyes studied by persistent spectral hole burning

Persistent spectral hole burning spectroscopy is applied to evaluate the low‐temperature relaxation around the dye molecules doped in several types of polymers. The doped dye is tetraphenylporphine, and the measured polymers are vinyl polymers and main chain aromatic polymers. The changes of microscopic environments around the dye are evaluated from the changes in the hole profiles during temperature cycling experiments. The relaxation behavior of the polymers is discussed in relation to their chemical structures. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 585–592, 1999     

Effect of synthesis temperature on the preparation of titanium dioxides by the hydrothermal method. photocatalytic activity

Summary TiO₂ nanoparticles were prepared by the hydrolysis of titanium tetraisopropoxide (TTIP) using TMA (tetramethylamine) as a peptizer in the hydrothermal method. The photocatalytic degradation of Orange II has been studied in a batch reactor under UV light. The particle size was similar to that from hydrothermal treatment at 120-170^oC, but it increased to 23 nm at 200^oC. The titania particles prepared at 170^oC and calcined at 600^oC showed the highest activity in the photocatalytic decomposition ofOrange II.     

Au‐ and Ag‐loaded MnO2 nanostructures supported on nitrogen‐ and nitrogen–sulfur‐doped pyroproteins: Synthesis and catalytic activity in organic transformations

Four novel Au‐ and Ag‐loaded MnO₂ nanostructures supported on nitrogen‐doped pyroprotein of natural silk (Au–MnO₂@PPNS and Ag–MnO₂@PPNS) and nitrogen–sulfur‐doped pyroprotein of natural wool (Au–MnO₂@PPNW and Ag–MnO₂@PPNW) have been synthesized. Nitrogen‐ and nitrogen–sulfur‐doped pyroproteins were prepared by carbonization of natural silk and wool proteins, respectively. The catalysts were investigated for the aerobic oxidation of aromatic hydrocarbons of petroleum naphtha and the aerobic oxidative synthesis of 2‐phenylbenzo[d ]thiazoles, 2‐phenyl‐1H ‐benzo[d ]imidazoles and 2‐phenyl‐4‐quinazolinones in the absence of any co‐promoter and additional oxidizing reagent. The prepared catalytic systems showed higher catalytic activity in comparison to aggregated catalysts.     

Facile one‐step synthesis of broken case‐like carbon‐doped g‐C3N4 for photocatalytic degradation of benzene

Herein, a novel broken case‐like carbon‐doped g‐C₃N₄ photocatalyst was obtained via a facile one‐pot pyrolysis and cost‐effective method using glyoxal‐modified melamine as a precursor. The obtained carbon/g‐C₃N₄ photocatalyst showed remarkable enhanced photocatalytic activity in the degradation of gaseous benzene compared with that of pristine g‐C₃N₄ under visible light. The pseudo‐first‐order rate constant for gaseous benzene degradation on carbon/g‐C₃N₄ was 0.186 hr^?1, 5.81 times as large as that of pristine g‐C₃N₄. Furthermore, a possible photocatalytic mechanism for the improved photocatalytic performance over carbon/g‐C₃N₄ nanocomposites was proposed.     

Carbon–silica dual‐phase filler,a new‐generation reinforcing agent for rubber. Part VI. Time–temperature superposition of dynamic properties of carbon–silica‐dual‐phase‐filler‐filled vulcanizates

Dynamic properties such as shear modulus, loss modulus, and loss factor were obtained at a low strain amplitude over a wide range of frequencies and temperatures on vulcanizates filled with carbon black, silica, and carbon–silica dual‐phase filler. The data were shifted along the frequency scale. Instead of a single smooth master curve, a pseudomaster curve with a feather‐like structure is obtained. This effect is especially pronounced for the loss factor. Multiple factors may be responsible for this. Among others, filler networking and polymer–filler interaction may play a dominant role. The effect of the carbon–silica dual‐phase filler on the overall dynamic properties of the vulcanizates is similar to that of silica. Their tan δ values are much lower at lower frequencies and are relatively higher at higher frequencies. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1240–1249, 2000     

Easy conversion of nitrogen‐rich silk cocoon biomass to magnetic nitrogen‐doped carbon nanomaterial for supporting of Palladium and its application

In this study, magnetic nitrogen‐doped carbon (MNC) was fabricated through facile carbonization and activation of natural silk cocoons containing nitrogen and then combined with Fe₃O₄ nanoparticles to create a good support material for palladium. Palladium immobilization on the support resulted in the formation of magnetic nitrogen‐doped carbon‐Pd (MNC‐Pd). The prepared heterogeneous catalyst was well characterized using FT‐IR, TGA, EDX, FE‐SEM, XRD, VSM, and ICP‐OES techniques. Thereafter, the synthesis of biaryl compounds was conducted to investigate the catalyst performance via the reaction of aryl halides and phenylboronic acid. Further, the catalyst could be used and recycled for six consecutive runs without any significant loss in its activity.     

Theoretical study of two‐dimensionally fused zinc porphyrins: DFT calculations

Electronic structures of D_4h square‐fused zinc porphyrin sheets of two types ( SA , SB ), where SA is a directly meso‐meso‐, β‐β‐, and β‐β‐linked array and SB is a directly β‐fused array, were compared using density functional theory (DFT). The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of oligomeric SA _n are characteristically delocalized at the cyclooctatetraene‐like sites composed of β‐pyrrolic carbons and their nearest‐neighbor nitrogens. Those of oligomeric SB _n remain solitary monomeric features, reflecting weakly interacting porphyrin units. These two‐dimensionally (2D) square‐fused sheets, especially for SA _n, show effective reduction of both the HOMO–LUMO energy gaps (E_g) and the lowest Q‐like excitation energies because of LUMO's greater stabilization with increasing number of porphyrins than the corresponding one‐dimensionally (1D) linear‐fused tapes. To estimate the minimum value of E_g, the electronic band structures of the infinite‐fused SA _∞ and SB _∞ were examined in detail using modern periodic DFT. Results indicate a full metal for SA _∞, with HOMO and LUMO bands crossing the Fermi level, and a semiconductor with E_g ≈ 0.5 eV for SB _∞. Furthermore, the phonon modes and the electron–phonon coupling (EPC) constant of SA _∞ were calculated throughout the Brillouin zone using density functional perturbation theory (DFPT), yielding a weak EPC constant, λ = 0.35. Within the standard phonon‐mediated BCS mechanism, the superconducting transition temperature, T_c is demonstrated using the McMillan formula, predicting ≈0.5 K. Results show that SA _∞ will become a rare synthetic metal/superconductor without a metal‐insulator transition coming from Peierls lattice instability because it has no serious imaginary phonon modes. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Synthesis of V5+‐doped Ag/AgCl photocatalysts with enhanced visible light photocatalytic activity

V⁵⁺‐doped Ag/AgCl photocatalysts were prepared via the ion exchange method. The catalysts were characterized using X‐ray diffractometry, transmission electron microscopy, and energy‐dispersive X‐ray, X‐ray photoelectron, Fourier transform infrared and ultraviolet–visible spectroscopies. The V⁵⁺‐doped Ag/AgCl photocatalysts show much higher photocatalytic activities than Ag/AgCl under visible light irradiation for methyl orange (MO) decomposition. Especially, the 2.0 wt% V⁵⁺‐doped Ag/AgCl photocatalyst shows the highest photocatalytic activity and also high stability after five cycles. The MO degradation rate during each cycle is almost maintained at 97%. Electron spin resonance spectroscopy and radical trapping experiments reveal that holes play an important role in the photocatalytic process.     

Photocatalytic degradation of norfloxacin and its intermediate degradation products using nitrogen‐doped activated carbon–CuS nanocomposite assisted by visible irradiation

We have synthesized a nitrogen‐doped activated carbon (NAC) derived from oak using KOH and N₂ thermal treatment at 400 °C as well as CuS nanoparticles. The NAC was decorated with the synthesized CuS to apply as a photocatalyst for degradation of norfloxacin (NOR). Before its application for photodegradation, the adsorbent/photocatalyst structural properties were investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. The photocatalytic degradation of NOR was successfully done under visible light using NAC–CuS. The results revealed that the investigated fluoroquinolone degraded very efficiently and pseudo‐first‐order kinetics was adopted for the photodegradation process. In addition, isothermal studies showed that the adsorption process in darkness followed the Langmuir model. The degradation characteristics of the NAC–CuS photocatalyst were studied for 120 min and 15 h under visible light for degradation of NOR, exhibiting a good efficiency for NOR removal. During 120 min of degradation, some intermediate degradation products that can be considered as secondary pollutants were produced. Then, to degrade these pollutants the radiation time was increased up to 15 h. The results displayed a perfect degradation of NOR and its secondary pollutants. The effective variables including pH, degradation time and photocatalyst dosage were optimized and studied in a multivariate method using Design Expert 7. Determination of photodegradation products was carried out using liquid chromatography–mass spectrometry. The results are of significance for estimating the environmental fate of NOR in aqueous media.     

BiCl3‐catalyzed carbon‒carbon cross‐coupling of organoboronic acids with aryl iodides

A procedure for BiCl₃‐catalyzed carbon‐carbon cross‐coupling reaction of organoboronic acids with aryl iodides is described. This protocol has a wide substrate scope and uses an inexpensive and non‐toxic catalyst. Copyright © 2013 John Wiley & Sons, Ltd.     

Nonlinear optical limiters of pulsed laser radiation based on carbon‐containing nanostructures in viscous and solid matrices

Results of the study of optical limiters of pulsed laser radiation based on nonlinear effects in carbon nanostructures placed into viscous and solid matrices are presented. A nonlinear optical limiting was studied by nanomaterials based on multi‐wall polyhedral carbon nanostructures (astralens) placed in a sol–gel matrix. Similar studies for single‐wall and multi‐wall carbon‐containing nanotubes placed in polymer matrices with various viscosities were performed. No additional mechanism of optical limiting due to electron structure of single‐wall carbon‐containing nanotubes at their introduction into viscous and solid composite media was found. An influence of polymer matrix composition containing carbon nanotubes (CNTs) on a threshold and ratio of attenuation of laser radiation was demonstrated. The best limiting characteristics were observed at placing CNT into polymethylsiloxane matrix. An effect of “self‐healing” of a medium after laser radiation passage through high viscous liquids was obtained. The high parameters of nonlinear optical limiting (the threshold of limiting 10^?5 J, ratio of attenuation 10³) achieved for the composite material CNT (HiPCO High‐Pressure Carbon Monoxide) and carbon nanofibers in high viscous and solid polymethylsiloxane media allow the design of protective filters for laser radiation operating in wide spectral range. Copyright © 2014 John Wiley & Sons, Ltd.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Application of the field‐theoretic method of Bohm and Pines to a study of the metal–insulator transition in doped dielectric media

A treatment based on the field‐theoretic formalism of Bohm and Pines is presented which reproduces theoretically the essential features of the Mott–Edwards–Sienko relation, na∼¼, for the location of the metal–insulator transition in doped dielectric media, where n_c is the critical electron concentration and a is the effective radius. The model allows a study to be made of the dopant electronic wave function from the localized insulating state through to the metallic regime. The effective interparticle interaction shows Friedel oscillations and, at short range, is close to the Thomas–Fermi form. The doping dependence of the electronic hyperfine interaction, total dielectric constant, and ionization energy for a disordered collection of s‐state one‐electron atoms in a structureless dielectric medium are derived and both are found to be in satisfactory qualitative agreement with experiment. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 71: 111–120, 1999     

Preparation of 1,2,4,5‐tetrasubstituted imidazoles over magnetic core–shell titanium dioxide nanoparticles

Magnetic core–shell titanium dioxide nanoparticles (Fe₃O₄@SiO₂@TiO₂) were applied for the efficient preparation of 1,2,4,5‐tetrasubstituted imidazole derivatives by the one‐pot multi‐component condensation of benzil with aldehydes, primary amines and ammonium acetate under solvent‐free conditions. The catalyst was synthesized and studied using several techniques including X‐ray diffraction, transmission electron microscopy, field‐emission scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication of glucose‐derived carbon‐decorated magnetic microspheres for extraction of bisphenols from water and tea drinks

Glucose‐derived carbon‐decorated magnetic microspheres were synthesized by an easy hydrothermal carbonization method and used as a high‐efficiency adsorbent to extract bisphenols in water and tea drinks. The as‐prepared carbon‐decorated magnetic microspheres had a well‐defined core–shell structure with a shell thickness of about 5 nm. The microspheres possessed high saturation magnetization at 60.8 emu/g and excellent chemical stability in aqueous solution. The experimental parameters affecting the extraction efficiency, including extraction time, pH, adsorbent dosage, desorption solvents, desorption time, and solution volume were evaluated. Electrostatic and π–π interactions were the major driving forces during extraction. Overall, a new magnetic solid‐phase extraction method of determining bisphenols was developed on the basis of as‐prepared magnetic microspheres. The method had a wide linear range, low limits of detection (0.03–0.10 µg/L), and high recoveries (85.4–104.6%).     

Ultrasound‐assisted dispersive micro‐solid‐phase extraction based on N‐doped mesoporous carbon and high‐performance liquid chromatographic determination of 1‐hydroxypyrene in urine samples

In this research, a new ultrasound‐assisted dispersive micro‐solid‐phase extraction method based on N‐doped mesoporous carbon sorbent followed by high‐performance liquid chromatography equipped with diode array detector for trace measurement of 1‐hydroxypyrene as a metabolite of exposure to polycyclic aromatic hydrocarbons was optimized. Herein, the hard template method was used for the preparation of N‐doped mesoporous carbon sorbent. The prepared sorbent was characterized using the Brunauer–Emmett–Teller method, transmission electron microscopy, and elemental analysis. Parameters affecting the extraction of the target metabolite were investigated using the Box–Behnken design method. Considering optimum parameters, the plotted calibration curve for 1‐hydroxypyrene was linearly correlated with the concentration span of 0.1–50 μg/L for urine media. The accuracy of the optimized procedure was examined through the relative recovery tests on the fortified urine specimens. The relative recoveries fell between 95 and 101%. The method detection limit of the proposed procedure was also calculated to be 0.03 μg/L.     

Synthesis of W‐doped TiO2 by low‐temperature hydrolysis: Effects of annealing temperature and doping content on the surface microstructure and photocatalytic activity

A series of tungsten‐doped Titania photocatalysts were synthesized using a low‐temperature method. The effects of dopant concentration and annealing temperature on the phase transitions, crystallinity, electronic, optical, and photocatalytic properties of the resulting material were studied. The X‐ray patterns revealed that the doping delays the transition of anatase to rutile to a high temperature. A new phase W_yTi_1‐yO₂ appeared for 5.00 wt% W‐TiO₂ annealed at 900 °C. Raman and diffuse reflectance UV–Vis spectroscopy showed that band gap values decreased slightly up to 700 °C. X‐ray photoelectron spectroscopy showed that surface species viz. Ti³⁺, Ti⁴⁺, O^2?, oxygen‐vacancies, and adsorbed OH groups vary depending on the preparation conditions. The photocatalytic activity was evaluated via the degradation of methylene blue using LED white light. The degradation rate was affected by the percentage of dopants. The best photocatalytic activity was achieved with the sample labeled 5.00 wt% W‐TiO₂ annealed at 700 °C.     

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.     

An Efficient Synthesis of 1,3‐Diphenyl‐3‐phenylamino‐propan‐1‐one and its Derivatives by Mannich Reaction in the Presence of Doped Porous Carbon by Nitrogen and Sulfur (NS‐PCS) as Catalyst

Synthesis of β‐amino carbonyl compounds by Mannich reaction involves the creation of various bonds in a single action and is attracting great attention as one of the most powerful synthetic tools for the expansion of molecular convolution and versatility. Carbon spheres (CSs) combine the advantages of carbon materials with spherical colloids, which gives them several inimitable features as catalysts. In this work, the reaction between acetophenone, aromatic aldehydes, and aromatic amines has been efficiently catalyzed by porous carbon spheres which were doped by nitrogen and sulfur (NS‐PCS) at ambient temperature to give diverse β‐amino carbonyl compounds in nearly high yields.