Synthesis and characterization of novel poly(ester carbonate)s based on pentaerythritol

Novel poly(ester carbonate)s were synthesized by the ring‐opening polymerization of L ‐lactide and functionalized carbonate monomer 9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one derived from pentaerythritol with diethyl zinc as an initiator. ¹H NMR analysis revealed that the carbonate content in the copolymer was almost equal to that in the feed. DSC results indicated that T_g of the copolymer increased with increasing carbonate content in the copolymer. Moreover, the protecting benzylidene groups in the copolymer poly(L ‐lactide‐co‐9‐phenyl‐2,4,8,10‐tetraoxaspiro[5,5]undecan‐3‐one) were removed by hydrogenation with palladium hydroxide on activated charcoal as a catalyst to give a functional copolymer, poly(L ‐lactide‐co‐2,2‐dihydroxylmethyl‐propylene carbonate), containing pendant primary hydroxyl groups. Complete deprotection was confirmed by ¹H NMR and FTIR spectroscopy. The in vitro degradation rate of the deprotected copolymers was faster than that of the protected copolymers in the presence of proteinase K. The cell morphology and viability on a copolymer film evaluated with ECV‐304 cells showed that poly(ester carbonate)s derived from pentaerythritol are good biocompatible materials suitable for biomedical applications. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45:1737 –1745, 2007     

以季戊四醇为引发剂的星形聚对二氧环己酮的合成

本文以辛酸亚锡(SnOct2)为催化剂,以季戊四醇(PTOL)为引发剂,引发对二氧环己酮PDO单体开环聚合,合成了具有新颖结构的星形PPDO,研究了单体和引发剂的比例、单体和催化剂的比例、温度、时间等反应条件对聚合反应的影响,结果表明,通过调节PDO和PTOL的比例可以控制聚合产物的分子量。     

A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

Synthesis and light‐emitting properties of platinum‐containing oligoynes and polyynes derived from oligo(fluorenyleneethynylenesilylene)s

A series of blue‐light‐emitting oligo(fluorenyleneethynylenesilylene)s (OFESs) of the general formula HC?CRC?C(EC?CRC?C)_mEC?CRC?CH (E = SiPh₂, SiMe₂, or SiMe₂? SiMe₂; m = 0–2; R = 9,9‐dihexylfluorene‐2,7‐diyl) and their phosphorescent platinum‐containing oligoynes and polyynes were synthesized and characterized. The solution properties and regiochemical structures of this new structural class of organosilicon‐based polyplatinayne polymers {trans‐[? Pt(PBu₃)₂C ?CRC?C(EC?CRC?C)_mEC?CRC?C? ]_n} were studied with IR and NMR (¹H, ¹³C, ²⁹Si, and ³¹P) spectroscopy. The optical absorption and photoluminescence spectra of these metallopolymers were examined and compared with their discrete oligomeric model complexes. Our studies led to a novel approach of using the sp³‐silyl moiety as a conjugation interrupter to limit the effective conjugation length in metal polyynes, which could boost the phosphorescence decay rates essential for light‐energy harvesting from the triplet excited state. The influence of the heavy platinum atom and the group 14 silyl unit possessing different side‐group substituents on the thermal and phosphorescence properties was investigated in detail. We also established the goal of studying the evolution of the lowest singlet and triplet excited states with chain length m of OFESs and the nature of E in these metallopolymers. This work indicated that the phosphorescence emission efficiency harnessed through the heavy‐atom effect of platinum in the main chain did not change very much with oligomer chain length m but generally decreased with the E group in the order SiMe₂ > SiMe₂? SiMe₂ > SiPh₂. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4804–4824, 2006     

Heteroaromatic alanine derivatives bearing (oligo)thiophene units: synthesis and photophysical properties

A series of new benzoxazolylalanine derivatives bearing (oligo)thiophene units at the side chain were synthesized in good yields. The photophysical characterization of these amino acids was performed by UV-vis absorption and fluorescence emission studies and revealed that some of the compounds display high fluorescent quantum yields, making them good candidates for application as fluorescent probes.     

Synthesis and characterization of soluble oligo (9,10-bisalkynylanthrylene)s

[structure: see text] Soluble oligo(9,10-bialkynylanthrylene)s up to pentamers were synthesized by means of the Suzuki coupling reaction. A solution processed thin film field-effect transistor from pentamer OA-5b shows a charge carrier mobility of 2.95 x 10(-)(3) cm(2)/V x s.     

Combinatorial synthesis of oligo(phenylene ethynylene)s

The combinatorial synthesis of oligo(phenylene ethynylene) tetramers, both in solution and on solid support, is described. These products are of interest for molecular electronics applications. An iterative sequence, coupling of aryl halides to alkynes under Sonogashira conditions, was used. Five monomers functionalized with electron-donating or electron-withdrawing groups were synthesized, and used to generate a library of 25 trimers in a solution-phase based process. A library of 24 tetramers was prepared by subsequent protodesilylation and coupling with the alligator clip 4-iodo-1-thioacetylbenzene. The solution-phase based sequence was successfully adapted to a higher yielding directed split-and-pool solid-phase process, with average yields of 78–86% for each step over seven steps. A triazene linker group was used to attach the starting monomer to the polymer beads. At the completion of the solid-phase-based process, traceless cleavage of trimers from the resin was achieved by sonication of the resin in 10% HCl/THF solution. The released products were then poised for the final step in the sequence, attachment of the alligator clip.     

Synthesis of thermally stable aromatic poly(spiroorthocarbonate)s having a Cardo or bent structure

Novel poly(spiroorthocarbonate)s [poly(SOC)]s having a Cardo or bent structure were synthesized by polycondensation of several bis‐catechols having fluorene (BCFL), spirobisindane (BCSPI), or spirobischromane (BCSPC) in the structure with 2,2,6,6‐tetrachlorobenzo[1,2‐d:4,5‐d’]bis[1,3]dioxole (4ClBD). Synthesis of poly(SOC)s was confirmed by NMR and IR spectrometry. The poly(SOC)s obtained from BCFL or BCSPC were soluble in common organic solvents. The glass transition temperature of the poly(SOC)s was not detected by differential scanning calorimetry (DSC) in the range of 50–300 °C. The 10 wt % decomposition temperature of the poly(SOC)s was found to be above 400 °C. These results indicated the high thermal stability of the poly(SOC)s. Soluble poly(SOC)s could be possessed to form a film on a glass plate by the spin coat method. The obtained polymer films were 0.2 μm in thickness with 95% light transmission in the optical wavelength range. These results suggested that the Cardo or bent structure may block the packing of the main‐chain of the structure, which improves the solubility of the polymers, increases transparency, and enhances the thermal stability of SOCs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1409‐1416     

Photophysical properties of oligo(2,3-thienyleneethynylene)s

Photophysical properties of oligo(2,3-thienyleneethynylene)s (nTE, n denotes the number of thiophene rings, n = 2, 3) in benzene were investigated using steady-state, time-resolved fluorescence, and transient absorption spectroscopies. For 2TE, generation of the radiative S2 and nonradiative S1 states was confirmed. Upon excitation, the S2 state was initially generated and deactivated to the S1 state within 10 ps. The S1 state exhibited the transient absorption band at 470 nm, of which the lifetime was estimated to be 5.3 ns. In the case of 3TE, on the other hand, it was revealed that the radiative S1 state with a transient absorption peak at 650 nm was generated upon excitation. The T1 states of nTE were generated from the S1 states. The quantum yields were estimated to be 0.52 and 0.54 for 2TE and 3TE, respectively. Extremely fast reactions in the higher triplet excited state were indicated for both 2TE and 3TE.     

New optically active poly（amide-imide）s derived from N, N′-（4,4-diphthaloyl）-bis-L-leucine and hydantoin derivatives： Synthesis and properties

Six new optically active poly(amide-imide)s(5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'- diphthaloyl)-bis-L-leucine(3) with six hydantoin derivatives(4a-f).Triphenyl phosphite(TPP)/pyridine in the presence of calcium chloride(CaCl_2) and N-methyl-2-pyrrolidone(NMP) were successfully applied for direct polycondensation.The polycondensation reactions produce a series of new poly(amide-imide)s(5a-f) in high yields,and inherent viscosity between 0.42 and 0.55 dL/g.The re...     

Stable and soluble oligo(3,4-ethylenedioxythiophene)s end-capped with alkyl chains

The synthesis of a new series of stable and soluble EDOT oligomers end-capped with n-hexyl groups is described. Optical and electrochemical results indicate that the synergy between the direct electron-releasing effects of the ethylenedioxy groups and the self-rigidification resulting from intramolecular interactions controls to a large extent the HOMO-LUMO gap.     

First synthesis and electronic properties of cyano(oligo)phenothiazines

(Oligo)phenothiazinyl nitriles were synthesized in good to very good yields from bromo (oligo)phenothiazines via the Beller cyanation protocol either under conductive or under dielectric heating using NMP as a solvent. Their electronic properties were determined by absorption and emission spectroscopy and cyclic voltammetry. Cyano(oligo)phenothiazines display large Stokes-shifts (5800-8300 cm⁻¹) and substantial quantum yields (11-27%). Their reversible oxidation potentials are considerably shifted anodically due to the electron-withdrawing character of the cyano group.     

Synthesis and physical properties of triptycene-based oligo(p-phenyleneethynylene)s

A series of symmetrical and unsymmetrical triptycene-based oligo(op-phenyleneethynylene)s were synthesized by deprotection of the acetone protected terminal alkynes, followed by Sonogashira coupling reactions. The photophysical properties of triptycene-based OPEs both in solution and solid state have been investigated by UV–Vis and fluorescence spectroscopy. Interestingly, the obtained compounds show strong fluorescence with partly high quantum yields in solid state, which suggested that triptycene moieties have not only prevented the intermolecular aggregation but also enforced the coplanarity of OPEs backbone in the solid state.     

Efficient and rapid synthesis of oligo(p-phenylenevinylene) via iterative coherent approach

A general and controlled bidirectional growth strategy enables a very rapid and efficient construction of OPV compounds possessing functional groups such as aldehyde and mercapto groups at both ends. The strategy employs only one reaction type with high yields and stereoselectivities to grow the conjugated chains, eliminating the need for protecting groups in the overall intermediates.     

High-pressure synthesis and properties of aliphatic–aromatic polyimides via nylon-salt-type monomers derived from aliphatic diamines and benzophenonetetracarboxylic acid

Aliphatic polyimides (P-XBTA) having inherent viscosities of 0.4–1.4 dL/g were readily synthesized by the high-pressure polycondensation of the salt monomers, composed of aliphatic diamines having various methylene chain lengths (X = 4–12) and 3,3′,4,4′-benzophenonetetracarboxylic acid (BTA), under 200–250 MPa at 200–320°C. The salt monomers with odd-numbered methylene units were found to be more susceptible to crosslinking than those containing even-numbered methylene chains. The polyimides having even-numbered methylene units were highly crystalline, whereas those with odd-numbered methylene chains were crosslinked and therefore amorphous with only one exception, i.e., P-11BTA. The thermal behavior of these polymers was also studied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 39–47, 1998     

A new approach to the synthesis of diacetals（diketals） pentaerythritol catalyzed by SO3H-functionalized ionic liquids

<正>In this article,an efficient,simple and environmentally friendly approach to the synthesis of diacetals(diketals) pentaerythritol using SO_3H-functionalized ionic liquids(ILs) as catalysts was reported.The ILs show high catalytic activity and reusability with good to excellent yields of the desired products.Hammett method has been used to determine the acidity order of these ionic liquids and the results are consistent with the catalytic activities observed in acetalization reaction.Maximum product yield of 93%was observed on using[PSPy][OTf]as catalyst and it can be reused at least 8 times without obvious activity loss.