An efficient synthesis and cytotoxic activity of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole obtained using a magnetically recyclable Fe3O4 nanocatalyst‐mediated white tea extract

A simple and efficient procedure has been developed for the synthesis of biologically relevant 2‐substituted benzimidazoles through a one‐pot condensation of o‐phenylenediamines with aryl aldehydes catalysed by iron oxide magnetic nanoparticles (Fe₃O₄ MNPs) in short reaction times with excellent yields. In the present study, Fe₃O₄ MNPs synthesized in a green manner using aqueous extract of white tea (Camelia sinensis) (Wt‐Fe₃O₄ MNPs) were applied as a magnetically separable heterogeneous nanocatalyst to synthesize 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole which has potential application in pharmacology and biological systems. Fourier transform infrared and NMR spectroscopies were used to characterize the 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole. In vitro cytotoxicity studies on MOLT‐4 cells showed a dose‐dependent toxicity with non‐toxic effect of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole, up to a concentration of 0.147 µM. The green synthesized Wt‐Fe₃O₄ MNPs as recyclable nanocatalyst could be used for further research on the synthesis of therapeutic materials, particularly in nanomedicine, to assist in the treatment of cancer.     

Fe3O4@Propylsilane@Histidine[HSO4‐] magnetic nanocatalysts: Synthesis,characterization and catalytic application for highly efficient synthesis of xanthene derivatives

The surface of Fe₃O₄ magnetic nanoparticles (MNPs) was modified by chloropropylsilane and histidine. The imidazole group of prepared Fe₃O₄@Propylsilane@Histidine MNPs converted to imidazolium hydrogen sulfate group and Fe₃O₄@Propylsilane@Histidine [HSO₄^‐] as a novel environmentally friendly ionic liquid/ magnetite nanoparticle was prepared, successfully. FT‐IR, XRD, SEM and TEM instruments was used to identifiy the histidine ionic liquids/magnetite nanoparticles (HILMNPs). The catalytic activity of synthesized HILMNPs was appraised for the synthesis of 9‐aryl‐1,8‐dioxooctahydroxanthene and spiro[indoline‐3,9′‐xanthene]trione derivatives. The activity of HILMNPs was much better than the other reported heterogeneous and homogeneous catalysts. Furthermore, the prepared catalyst could be separated from the reaction mixture and reused four times without any significant loss in its activity.     

Synthesis,characterization and application of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles

In this study, the synthesis of sulfonic acid supported on ferrite–silica superparamagnetic nanoparticles (Fe₃O₄@SiO₂@SO₃H) as a nanocatalyst with large density of acidic groups is suggested. This nanocatalyst was prepared in three steps: preparation of colloidal iron oxide magnetic nanoparticles (Fe₃O₄ MNPs), coating of silica on Fe₃O₄ MNPs (Fe₃O₄@SiO₂) and incorporation of sulfonic acid as a functional group on the surface of Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂@SO₃H). The properties of the prepared magnetic nanoparticles were characterized using transmission electron microscopy, infrared spectroscopy, vibrating sample magnetometry, X‐ray diffraction and thermogravimetric analysis. Finally, the applicability of the synthesized magnetic nanoparticles was tested as a heterogeneous solid acid nanocatalyst for one‐pot synthesis of diindolyloxindole derivatives in aqueous medium. Oxindole derivatives were produced by the coupling of indole and isatin compounds with good to high yields (60–98%). Copyright © 2016 John Wiley & Sons, Ltd.     

A Novel Synthesis and Antioxidant Evaluation of Functionalized [1,3]‐Oxazoles Using Fe3O4‐Magnetic Nanoparticles

In this research, green procedure was employed for biosynthesis of magnetic nanoparticles of iron oxide (Fe₃O₄‐MNPs) by reduction of ferric chloride solution with Orange peel water extract. Also, dihydro‐2H‐cyclopenta[d][1,3]oxazole was generated through multicomponent reaction of 1,3‐oxazole‐2(3H)‐thione, dialkyl acetylenedicarboxylates, α‐haloketones, and Fe₃O₄‐MNPs as catalyst at ambient temperature in good yield. Initially, 1,3‐oxazole‐2(3H)‐thione derivatives as one of the precursors are produced through the reaction of alkyl bromides, isothiocyanate, sodium hydride, and Fe₃O₄‐MNPs as catalyst water at ambient temperature in 83–95% yields. Also, diphenyl‐picrylhydrazine radical trapping and ferric reduction activity potential assays are used for evaluation of antioxidant activity of some synthesized compounds. Among investigated compounds, 4b has good power for radical trapping activity and 4d has good reduction power to butylated hydroxytoluene and 2‐tert‐butylhydroquinone.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

Synthesis,characterization, and catalytic application of Fe3O4‐Si‐[CH2]3‐N=CH‐aryl for the efficient synthesis of novel poly‐substituted pyridines

Fe₃O₄ magnetic nanoparticles (MNPs) were functionalized by aminopropylsilane and reacted with aromatic aldehyde, and Fe₃O₄‐Si‐[CH₂]₃‐N=CH‐Aryl and Fe₃O₄‐Si‐(CH₂)₃‐NH‐CH₂‐Aryl MNPs were prepared as novel magnetic nanocatalysts. Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), and scanning and transmission electron microscopy (SEM and TEM) were used to identify the MNPs. The catalytic activity of the MNPs was evaluated in the one‐pot synthesis of some novel poly‐substituted pyridine derivatives.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Fe3O4–cysteamine hydrochloride magnetic nanoparticles: New,efficient and recoverable nanocatalyst for Knoevenagel condensation reaction

Fe₃O₄ magnetic nanoparticles (MNPs) were obtained using a reduction–precipitation method. These MNPs were modified with cysteamine hydrochloride. This catalyst was characterized using a number of physicochemical measurements. The Fe₃O₄–cysteamine MNPs, as an efficient and heterogeneous catalyst, were successfully used for Knoevenagel condensation under mild conditions. The activity of this nanomagnetic catalyst in the Knoevenagel condensation of aromatic aldehydes and malononitrile is described. Easy preparation of the catalyst, easy work‐up procedure, excellent yields and short reaction times are some of the advantages.     

Enhancing of asphaltene adsorption onto Fe3O4 nanoparticles coated with metal-organic framework Mil-101 (Cr) for the inhibition of asphaltene precipitation

In this study, the potential of MOF (Mil-101-Cr)-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MOF MNPs) for asphaltene adsorption was investigated for the first time and the results were compared with magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs). The coprecipitation method was used for the synthesis of both nanoparticles and were verified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). The initial asphaltene concentration, nanoparticles concentration, and temperature were the investigated parameters that influenced the adsorption capacity. Increasing the asphaltene concentration, decreasing the mass of nanoparticles, and reducing the temperature could enhance the maximum asphaltene adsorption capacities of 0.79 for Fe₃O₄ MNPs and 0.98?mg?m^?2 for Fe₃O₄-MOF MNPs. Adsorption isotherms tests showed that the Langmuir model was in agreement with the experimental data. In addition, the evaluation of adsorption kinetics demonstrated that the pseudo-second-order Lagergren model predicted the results more precisely. The amount of asphaltene adsorption for Fe₃O₄-MOF MNPs was higher than that for Fe₃O₄ MNPs. These results recommend the application of MOF as an appropriate and effective coating for enhancing asphaltene adsorption.     

Protease Immobilization on γ‐Fe2O3/Fe3O4 Magnetic Nanoparticles for the Synthesis of Oligopeptides in Organic Solvents

The use of nanobiocatalysts, with the combination of nanotechnology and biotechnology, is considered as an exciting and rapidly emerging area. The use of iron oxide magnetic nanoparticles, as enzyme immobilization carriers, has drawn great attention because of their unique properties, such as controllable particle size, large surface area, modifiable surface, and easy recovery. In this study, various γ‐Fe₂O₃/Fe₃O₄ magnetic nanoparticles with immobilized proteases were successfully prepared by three different immobilization strategies including A) direct binding, B) with thiophene as a linker, and C) with triazole as a linker. The oligopeptides syntheses catalyzed by these magnetic nanoparticles (MNPs) with immobilized proteases were systematically studied. Our results show that i) for magnetic nanoparticles immobilized α‐chymotrypsin, both immobilization strategies A and B furnished good reusability for the Z‐Tyr‐Gly‐Gly‐OEt synthesis, the MNPs enzymes can be readily used at least five times without significant loss of its catalytic performance: ii) In the case of Z‐Asp‐Phe‐OMe synthesis catalyzed by magnetic nanoparticles immobilized thermolysin, immobilization Strategy B provided the best recyclability: iii) For the immobilized papain, although Strategy A or B afforded an immobilized enzyme for the first cycle of Z‐Ala‐Leu‐NHNHPh synthesis in good yield, their subsequent catalytic activity decreased rapidly. In general, the γ‐Fe₂O₃ MNPs were better for use as an immobilization matrix, rather than the Fe₃O₄ MNPs, owing to their smaller particle size and higher surface area.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Application of 1‐methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe3O4 as a novel modified magnetic nanocatalyst for the synthesis of pyrano[2,3‐d]pyrimidines

1‐Methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe₃O₄ magnetic nanoparticles [Fe₃O₄@SiO₂@(CH₂)₃‐1‐methyl imidazole]HSO₄ as a solid acid magnetic nanocatalyst was explored in the synthesis of pyrano[2,3‐d]pyrimidine derivatives. Pyrano[2,3‐d]pyrimidine derivatives were synthesized by a highly efficient three‐component reaction of various benzaldehydes, malononitrile, and barbituric acid. The catalyst was characterized by using various analysis techniques such as Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), differential scanning calorimetry‐thermogravimetry analysis (DSC‐TGA), scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM).     

Sulfamic acid heterogenized on functionalized magnetic Fe3O4 nanoparticles with diaminoglyoxime as a green,efficient and reusable catalyst for one‐pot synthesis of substituted pyrroles in aqueous phase

Surface functionalization of magnetic nanoparticles is an elegant way to bridge the gap between heterogeneous and homogeneous catalysis. We have conveniently loaded sulfonic acid groups on amino‐functionalized Fe₃O₄ nanoparticles affording sulfamic acid‐functionalized magnetic Fe₃O₄ nanoparticles (MNPs/DAG‐SO₃H) as an active and stable magnetically separable acidic nanocatalyst, which was characterized using X‐ray diffraction, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, scanning and transmission electron microscopies, vibrating sample magnetometry and elemental analysis. The catalytic activity of MNPs/DAG‐SO₃H was probed through one‐pot synthesis of N‐substituted pyrroles from γ‐diketones and primary amines in aqueous phase at room temperature. The heterogeneous catalyst could be recovered easily by applying an external magnet device and reused many times without significant loss of its catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Biosynthesis of Fe3O4-magnetic nanoparticles using clover leaf aqueous extract: Green synthesis of 1,3-benzoxazole derivatives

In this research, magnetic Fe₃O₄-NP nanoparticles were synthesized employing a green biosynthetic procedure by reduction of ferric chloride solution with clover leaf water extract. The nanoparticles prepared via this biosynthesis method can potentially be valuable for different purposes such as organic synthesis. In this research, 1,3-benzoxazole derivatives were generated via a multicomponent reaction of α-bromo ketones, isothiocyanate, and propiolate in the presence of a catalytic amount of bio-Fe₃O₄ MNPs and sodium hydride in water at 50°C in good yields. The catalyst was reused five times with a minor decrease in its catalytic activity.     

General Protocol for the Synthesis of Functionalized Magnetic Nanoparticles for Magnetic Resonance Imaging from Protected Metal–Organic Precursors

The development of magnetic nanoparticles (MNPs) with functional groups has been intensively pursued in recent years. Herein, a simple, versatile, and cost‐effective strategy to synthesize water‐soluble and amino‐functionalized MNPs, based on the thermal decomposition of phthalimide‐protected metal–organic precursors followed by deprotection, was developed. The resulting amino‐functionalized Fe₃O₄, MnFe₂O₄, and Mn₃O₄ MNPs with particle sizes of about 14.3, 7.5, and 6.6 nm, respectively, had narrow size distributions and good dispersibility in water. These MNPs also exhibited high magnetism and relaxivities of r₂=107.25 mM^?1 s^?1 for Fe₃O₄, r₂=245.75 mM^?1 s^?1 for MnFe₂O₄, and r₁=2.74 mM^?1 s^?1 for Mn₃O₄. The amino‐functionalized MNPs were further conjugated with a fluorescent dye (rhodamine B) and a targeting ligand (folic acid: FA) and used as multifunctional probes. Magnetic resonance imaging and flow‐cytometric studies showed that these probes could specifically target cancer cells overexpressing FA receptors. This new protocol opens a new way for the synthesis and design of water‐soluble and amino‐functionalized MNPs by an easy and versatile route.     

Fe3O4@SiO2–ZrCl2‐MNPs: A novel magnetic catalyst for the clean and efficient cascade synthesis of 1‐(benzothiazolylamino)methyl‐2‐naphthol derivatives in the absence of solvent

A green, simple and eco‐friendly three‐component condensation for the synthesis of 1‐(benzothiazolylamino)methyl‐2‐naphthols using new magnetic nanoparticles formulated as Fe₃O₄@SiO₂–ZrCl₂‐MNPs is described. Considering the economic and environmental aspects, the method provides some advantages such as clean procedure, solvent‐free conditions, simple operation and work‐up, relatively short reaction times and high yields of the products. Moreover the introduced catalyst can be readily recovered up to 4 consecutive runs with consistent activity using an external magnet.     

Facile preparation of boronic acid‐functionalized magnetic nanoparticles with a high capacity and their use in the enrichment of cis‐diol‐containing compounds from plasma

The use of bronate affinity adsorbents is a new separation method that appeared recently with great potential for specific extraction of cis‐diol‐containing compounds. In this work,a new strategy for the facile construction of boronic acid‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@FPBA MNPs) with a high capacity was described. The extraction capacity of the Fe₃O₄@FPBA MNPs was determined to be 66.0 ± 2.7 µmol/g for catechol and 80.6 ± 2.0 µmol/g for dopamine, being higher than that for the reported methods. The Fe₃O₄@FPBA MNPs were used to extract four cis‐diol drugs: caffeic acid isopropyl ester, caffic acid bornyl ester, isopropyl 3‐(3,4‐dihydroxyphenyl)‐2‐hydroxypropanoate and 3‐(3, 4‐dihydroxyphenyl)‐2‐hydroxylpropionic acid – from the spiked rabbit plasma, and the recoveries of four drugs were between 87.29 and104.37% with relative standard deviations ranging from 1.34 to 8.81%. Under the most favorable conditions, the solid‐phase extraction combined with HPLC‐UV for the analysis of four drugs in plasma could eliminate interferences from endogenous components of the biological fluids and exhibited sufficient precision and accuracy. These results showed that the prepared Fe₃O₄@FPBA MNPs were qualified for efficiently enriching and determining the trace cis‐diol substances from biological samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

Highly dispersed copper/ppm palladium nanoparticles as novel magnetically recoverable catalyst for Suzuki reaction under aqueous conditions at room temperature

An efficient procedure based on arginine‐modified Fe₃O₄@carbon magnetic nanoparticles (FCA MNPs) with highly dispersed copper nanoparticles (Cu NPs) and 92.8 ppm of Pd is reported for room temperature Suzuki reaction. For enhancing the activity of this Cu‐based heterogeneous catalyst, special arginine amino acid as a ligand with high content of heteroatoms was immobilized onto the Fe₃O₄@carbon MNPs to increase the electron density. Cu(II) ions were then loaded on the surface of the FCA MNPs and reduced to achieve uniformly dispersed Cu NPs. An aqueous mixture of metal hydroxides such as KOH, Ba(OH)₂, Ca(OH)₂, Mg(OH)₂ as a green, non‐toxic and basic medium was used for the Suzuki reaction at room temperature. This catalyst could also be recovered and reused with no loss of activity over six successful runs.