Composites of polypyrrole with conducting and ferromagnetic behaviors

Composites of polypyrrole (PPy) with electrical and ferromagnetic behaviors were synthesized by a chemical method in the presence of p‐dodecylbenzene sulfonic acid sodium salt (NaDS) as a surfactant and dopant. The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high saturated magnetization (M_s = 3.06–43.7 emu/g), and coercive force (H_c = 9–57 Oe). The saturated magnetization linearly increased with increases in the Fe content. No influence of the counterion on this relationship was observed. The conductivity of the composites at room temperature depended on the counterion and doping degree. The highest conductivity of 10⁰ S/cm was achieved under the optimal synthetic conditions. A structural characterization by elemental analysis, Fourier transform infrared, and X‐ray diffraction proved that nanometer‐sized (16–20‐nm) iron oxide (Fe₃O₄) in the composites was responsible for the ferromagnetic behavior of the composites, whereas the high conductivity of the composites contributed to the difficult deprotonation of the doping PPy with DS⁻ counterion in a basic reaction medium. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2734–2739, 2000     

Preparation and ferromagnetic properties of Ni0.5Zn0.5Fe2O4/polyaniline core–shell nanocomposites

Magnetic Ni_0.5Zn_0.5Fe₂O₄‐crosslinked polyaniline composites with a core–shell structure were prepared in the presence of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder in a toluene solution containing iron chloride as a surfactant and dopant. Structural characterization by Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy proved that Ni_0.5Zn_0.5Fe₂O₄ in the composites was responsible for the ferromagnetic behavior of the composites. The effects of the polyaniline and temperature on the magnetic properties of the Ni_0.5Zn_0.5Fe₂O₄/polyaniline composites were studied with electron paramagnetic resonance and superconducting quantum interference device techniques. A clear evolution from ferromagnetic resonance to electron paramagnetic resonance was observed as a function of temperature, which was related to the passage through the Curie point (～420 K). The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high‐saturated magnetization (saturation magnetization = 35–39 emu/g), low coercive force (coercivity = 22–28 G), and low blocking temperatures (～23 K). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2657–2664, 2006     

Synthesis and ferromagnetic properties of composites of a water-soluble polyaniline copolymer containing iron oxide

Composites of water-soluble conducting polyaniline copolymers, poly(aniline-co-aminobenzenesulfonic acid) (PAOABSA), containing γ-Fe₂O₃magnetic particles with nanometer size, were synthesized by a chemical method. The ferromagnetic properties of the resulting PAOABSA composites were measured as a function of the pH value of the reaction solution, the sulfonated degree of the copolymer, and the concentration of FeCl₂. The structure of the composites was characterized by means of elemental analysis, FTIR, XPS, and X-ray diffraction. It was found that increasing the pH value of the reaction solution and the concentration of FeCl₂ is favorable for an enhancement of the saturated magnetization. As high as 33.2 emu/g of saturated magnetization for the PAOABSA composites was observed. No hysteresis loop (i.e. H_c = 0) was observed, which is independent of the preparation conditions. Structure characterizations show that iron oxide existing in the composite is mainly γ- Fe₂O₃, which is responsible for the ferromagnetic properties of the PAOABSA composites, whereas γ- Fe₂O₃ magnetic particles nanometer in size (∼85 nm) may be attributed to a lower coercive force (i.e. H_c = 0) of the composites. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2749–2755, 1998     

A composite of polyaniline with both conducting and ferromagnetic functions

A composite of polyaniline (PANI) with both conducting and ferromagnetic functions was synthesized by a chemical method proposed by the authors. For the electrical properties, its room-temperature conductivity was measured to be about 10⁻¹ S/cm when doped with 1.0M HCl, and it is independent of the preparation conditions, such as reaction temperature and concentration of FeSO₄ solution. Temperature dependence of the conductivity of the composites at temperature between 77 and 450 K is controlled by thermal activation and dedoping processes, which result in the decrease of conductivity with increase of temperature as T > 320 K. For their magnetic properties, unusual ferromagnetic properties with high saturated magnetization (M₂) and lower coercive force (H_c = 0) were observed. An effect of the preparation conditions on the ferromagnetic properties of composites was observed. The higher the reaction temperature and the concentration of FeSO₄ solution, the higher the saturated magnetization was observed. No hysteresis feature (i.e. H_c = 0) for any PANI composites synthesized in this paper was observed, and this is independent of the preparation conditions. This may be attributed to the nanometer size of the magnetic particles existing in composites. Thus, it suggests that the doping of PANI leads to electrical properties of composites, whereas the nanocrystalline magnetic particles (Fe₃O₄) are responsible for the observed ferromagnetic properties of PANI composites. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2129–2136, 1997     

A novel Prussian blue‐magnetite composite synthesized by self‐template method and its application in reduction of hydrogen peroxide

A novel Prussian blue (PB)‐Fe₃O₄ composite has been prepared for the first time by self‐template method using PB as the precursor. According to this method, Fe₃O₄ nanoparticles distributed uniformly on the surface of PB cube. The feed ratio of sodium acetate to PB has been proved to be a key factor for magnetic properties and electro‐catalysis properties of the composite. Under the experimental conditions, the saturation magnetization value (Ms) of PB‐Fe₃O₄–2 composite was 22 emug^?1, while the Ms value of other samples reduced. The composites also showed a good peroxidase‐like activity for the oxidation of substrate 3,3,5,5‐tetramethylbenzidine (TMB) in the presence of H₂O₂. The catalytic reduction of hydrogen peroxide capacity was PB‐Fe₃O₄–1> PB‐Fe₃O₄–2> PB‐Fe₃O₄–3> PB‐Fe₃O₄–0, which confirmed the Fe(II) centres in PB surface and Fe₃O₄ nanoparticles had synergistic effect on catalytic reduction of hydrogen peroxide.     

Electrochemical Immunosensor for Ultrasensitive Detection of Human Chorionic Gonadotropin Based on Pd@SBA‐15

A simple and sensitive electrochemical immunosensor was conducted for the determination of human chorionic gonadotropin (hCG) with Pd@SBA‐15. Thionine (TH) was selected as an electron transfer mediator, and modified onto the electrode together with functionalized graphene nanomaterial (HSO₃^?GS) through electrostatic adsorption. Then Pd@SBA‐15 was immobilized onto the as‐prepared film for biomolecules anchoring. Pd@SBA‐15 composites not only retain the good biocompatibility of the SBA‐15, but also exhibit an excellent catalytic activity of Pd and low Pd leaching. hCG antibody was immobilized onto the composite film for the detection of hCG. hCG can be determined in the range of 0.01–16.00 ng/mL and the detection limit is 8.60 pg/mL. The method has been applied to the analysis of hCG in human serum samples with satisfactory results.     

Hydrophilic,Upconverting, Multicolor,Lanthanide‐Doped NaGdF4 Nanocrystals as Potential Multifunctional Bioprobes

Monodisperse water‐soluble hexagonal phase Ln³⁺‐doped NaGdF₄ upconverting nanocrystals (UCNCs) have been successfully fabricated by means of a fast, facile, and environmentally friendly microwave‐assisted route with polyethylenimine as the surfactant. Fine‐tuning of the UC emission from visible to near‐IR and finally to white light has been achieved. Furthermore, studies of the magnetic resonance imaging as well as the magnetization (magnetization–magnetic field curves) and the targeted recognition properties of FA‐coupled amine‐functionalized NaGdF₄@SiO₂ UCNCs indicate that the obtained NaGdF₄ UCNCs can be potential candidates for dual‐mode optical/magnetic bioapplications.     

Protease Immobilization on γ‐Fe2O3/Fe3O4 Magnetic Nanoparticles for the Synthesis of Oligopeptides in Organic Solvents

The use of nanobiocatalysts, with the combination of nanotechnology and biotechnology, is considered as an exciting and rapidly emerging area. The use of iron oxide magnetic nanoparticles, as enzyme immobilization carriers, has drawn great attention because of their unique properties, such as controllable particle size, large surface area, modifiable surface, and easy recovery. In this study, various γ‐Fe₂O₃/Fe₃O₄ magnetic nanoparticles with immobilized proteases were successfully prepared by three different immobilization strategies including A) direct binding, B) with thiophene as a linker, and C) with triazole as a linker. The oligopeptides syntheses catalyzed by these magnetic nanoparticles (MNPs) with immobilized proteases were systematically studied. Our results show that i) for magnetic nanoparticles immobilized α‐chymotrypsin, both immobilization strategies A and B furnished good reusability for the Z‐Tyr‐Gly‐Gly‐OEt synthesis, the MNPs enzymes can be readily used at least five times without significant loss of its catalytic performance: ii) In the case of Z‐Asp‐Phe‐OMe synthesis catalyzed by magnetic nanoparticles immobilized thermolysin, immobilization Strategy B provided the best recyclability: iii) For the immobilized papain, although Strategy A or B afforded an immobilized enzyme for the first cycle of Z‐Ala‐Leu‐NHNHPh synthesis in good yield, their subsequent catalytic activity decreased rapidly. In general, the γ‐Fe₂O₃ MNPs were better for use as an immobilization matrix, rather than the Fe₃O₄ MNPs, owing to their smaller particle size and higher surface area.     

Rapid magnetic solid‐phase extraction of Congo Red and Basic Red 2 from aqueous solution by ZIF‐8@CoFe2O4 hybrid composites

Core–shell metal–organic framework materials have attracted considerable attention mainly due to their enhanced or new physicochemical properties compared with their single‐component counterparts. In this work, a core–shell heterostructure of CoFe₂O₄‐Zeolitic Imidazolate Framework‐8 (ZIF‐8@CoFe₂O₄) is successfully fabricated and used as an solid‐phase extraction adsorbent to efficiently extract Congo Red and Basic Red 2 dyes from contaminated aqueous solution. Vibrating sample magnetometry indicates that the saturated magnetization of ZIF‐8@CoFe₂O₄ is 3.3 emu/g, which is large enough for magnetic separation. The obtained hybrid magnetic metal‐organic framework based material ZIF‐8@CoFe₂O₄ can remove the investigated dyes very fast within 1 min of the contact time. The adsorbent ZIF‐8@CoFe₂O₄ also shows a good reusability. After regeneration, the adsorbent can still exhibit high removal efficiency (～97%) toward Congo Red for five cycles of desorption–adsorption. This work reveals the great potential of core–shell ZIF‐8@CoFe₂O₄ sorbents for the fast separation and preconcentration of organic pollutants in aqueous solution before high‐performance liquid chromatography analysis.     

Synthesis and electrical–magnetic properties of polyaniline composites

Composites of polyaniline (PANI) with both conducting and ferromagnetic feature were synthesized by an improved method proposed by the authors. The electrical and ferromagnetic properties of the composites were measured as a function of the concentration of KOH solution used during polymerization. The conductivity of the composites at room temperature decreases with the increase of the concentration of KOH; the maximum conductivity of 8.0 × 10⁻¹ S/cm can be obtained when 25 wt % of concentration of KOH was used. For a high concentration of KOH, ferromagnetic properties of the composites including a high saturated magnetization (∼ 10.0 emu/g) depending on the concentration of KOH solution and a lower coercive force (H_c ≈ 0) independent of the concentration of KOH solution were observed. It has been demonstrated that magnetic particles (Fe₃O₄) with nanometer size in the composites can be attributed to the ferromagnetic properties of the composites observed. For a lower concentration of KOH solution, on the other hand, the magnetic properties of the composites can be decomposed to Curie susceptibility χ_c depending on the temperature and Pauli susceptibility χ_P independent of the temperature. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2799–2805, 1998     

H3PMo12O40‐immobilized chitosan/Co3O4: A novel and recyclable nanocomposite for the synthesis of pyrimidinedione derivatives

An efficient three‐component reaction of aromatic aldehydes, 6‐aminouracil/6‐amino‐1,3‐dimethyluracil and 4‐hydroxycoumarin in the presence of a novel heterogeneous catalyst H₃PMo₁₂O₄₀‐immobilized Co₃O₄/chitosan led to a synthesis of a new class of pyrimidinedione derivatives under reflux conditions. The magnetically recoverable nanocomposite of Co₃O₄/chitosan/H₃PMo₁₂O₄₀ was fully characterized by Fourier transform‐infrared spectrophotometry, scanning electron microscopy, X‐ray powder diffraction, energy‐dispersive X‐ray spectroscopy, vibrating‐sample magnetometry and N₂ adsorption–desorption by Brunauer–Emmett–Teller analysis. Results show that Keggin‐type 12‐molybdophosphoric acid immobilized into the network of the cross‐linked chitosan with super‐paramagnetic Co₃O₄ nanoparticles. The present method offers several advantages, such as simple procedure, short reaction times and excellent yields of products. The novelty of the catalyst, high catalytic activity, easy separation from the reaction with an external magnetic field and reusability of the catalyst in six consecutive runs are additional eco‐friendly attributes of this catalytic system.     

Synthesis and properties of thermoresponsive magnetic polymer composites and their electrospun nanofibers

The thermoresponsive magnetic polymer composites and nanofibers were fabricated. Their thermal and magnetic properties were also investigated. Fe₃O₄ nanoparticles were prepared by coprecipitation method. Further condensation reaction was used to fabricate the double‐layer lauric acid modified Fe₃O₄ (DLF) nanoparticles dispersed well in water. Thermal properties of poly(N‐isopropylacrylamide) (PNIPAAm) and DLF/PNIPAAm composites and their aqueous solutions were measured by TGA and DSC. With the increasing of DLF content, the interaction between DLF and PNIPAAm caused the lower critical solution temperature (LCST) of polymer solution to shift from 33 to 31.25 °C. The effects of concentration and pH on LCST were also studied. The DLF/PNIPAAm nanofibers were fabricated by electrospinning. Their diameters were around 100–250 nm. Magnetization curves of DLF/PNIPAAm composite and nanofibers were overlapped and the saturated magnetizations were the same. Magnetic attraction behaviors of DLF/PNIPAAm polymer solution at temperatures below and above LCST were different. Aggregation of DLF/PNIPAAm above LCST enhanced magnetic moment density as well as magnetic attraction ability. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 848–856     

Magnetic Silica‐Coated Sub‐Microspheres with Immobilized Metal Ions for the Selective Removal of Bovine Hemoglobin from Bovine Blood

Magnetic silica‐coated magnetite (Fe₃O₄) sub‐microspheres with immobilized metal‐affinity ligands are prepared for protein adsorption. First, magnetite sub‐microspheres were synthesized by a hydrothermal method. Then silica was coated on the surface of Fe₃O₄ particles using a sol–gel method to obtain magnetic silica sub‐microspheres with core‐shell morphology. Next, the trichloro(4‐chloromethylphenyl) silane was immobilized on them, reacted with iminodiacetic acid (IDA), and charged with Cu²⁺. The obtained magnetic silica sub‐microspheres with immobilized Cu²⁺ were applied for the absorption of bovine hemoglobin (BHb) and the removal of BHb from bovine blood. The size, morphology, and magnetic properties of the resulting magnetic micro(nano) spheres were investigated by using scanning microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), and a vibrating sample magnetometer (VSM). The measurements showed that the magnetic sub‐microspheres are spherical in shape, very uniform in size with a core‐shell, and are almost superparamagnetic. The saturation magnetization of silica‐coated magnetite (Fe₃O₄) sub‐microspheres reached about 33 emu g^?1. Protein adsorption results showed that the sub‐microspheres had a high adsorption capacity for BHb (418.6 mg g^?1), low nonspecific adsorption, and good removal of BHb from bovine blood. This opens a novel route for future applications in removing abundant proteins in proteomic analysis.     

Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe3O4@polyaniline composites as a highly efficient,magnetically separable and atom‐economical catalyst for reduction of nitrobenzenes

The preparation of Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe₃O₄@polyaniline composites is reported. Fe₃O₄ nanoclusters were first synthesized through the solvothermal method and then the SiO₂ shell was coated on the Fe₃O₄ surface via a sol–gel process. To prepare Fe₃O₄@SiO₂@polyaniline composites, polyvinylpyrrolidone was first grafted on to the surface of Fe₃O₄@SiO₂ composites and subsequently polymerization of aniline was carried out via an ultrasound‐assisted in situ surface polymerization method. Selective etching of the middle SiO₂ layer was then accomplished to obtain the yolk–shell Fe₃O₄@polyaniline composites. The approach uses polyaniline (PANI) conductive polymer as a template for the synthesis of Ni@Pd core–shell nanoparticles. The catalytic activity of the synthesized yolk–shell Fe₃O₄@PANI/Ni@Pd composite was investigated in the reduction of o‐nitroaniline to benzenediamine by NaBH₄, which exhibited conversion of 99% in 3 min with a very low content of the catalyst. Transmission electron microscopy, X‐ray photoelectron spectroscopy, TGA, X‐ray diffraction, UV–visible, scanning electron microscopy, X‐ray energy dispersion spectroscopy and FT‐IR were employed to characterize the synthesized nanocatalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

Logic Gates Based on Magnetic Nanoparticles Functionalized with a Bioelectrocatalytic System

Magneto‐controlled OR, AND and INHIB logic gates were designed using cobalt ferrite magnetic nanoparticles (CoFe₂O₄, saturated magnetization ca. 70 emu g^?1, 17±2 nm diameter) functionalized with microperoxidase‐11. Tunable magnetic field generated by three external permanent magnets (NdFeB) upon moving them below the electrochemical cell resulted in translocation of the biofunctionalized magnetic nanoparticles between conductive and nonconductive domains of a solid plate. This resulted in electrochemically readable output signals with the Boolean logic controlled by the magnetic input signals. The current corresponding to the reversible redox process of the heme measured at ?0.4 V (vs. SCE) was considered as “1” output signal, while a small background current obtained from the conducting interface in the absence of the magnetic nanoparticles was considered as “0” output signal. Addition of H₂O₂ to the solution resulted in the generation of a cathodic catalytic current when the microperoxidase‐11‐functionalized magnetic nanoparticles are associated with the conductive domain of the support. This resulted in the amplification of “1” output signal and the increased difference between “1” and “0” signals generated by the cell, thus reducing the possibility of errors in the Boolean logic operations.     

Magnetic iron(III)‐based framework composites for the magnetic solid‐phase extraction of fungicides from environmental water samples

We adopted a facile hydrofluoric acid‐free hydro‐/solvothermal method for the preparation of four magnetic iron(III)‐based framework composites (MIL‐101@Fe₃O₄‐COOH, MIL‐101‐NH₂@Fe₃O₄‐COOH, MIL‐53@Fe₃O₄‐COOH, and MIL‐53‐NH₂@Fe₃O₄‐COOH). The obtained four magnetic iron(III)‐based framework composites were applied to magnetic separation and enrichment of the fungicides (prochloraz, myclobutanil, tebuconazole, and iprodione) from environmental samples before high‐performance liquid chromatographic analysis. MIL‐101‐NH₂@Fe₃O₄‐COOH showed more remarkable pre‐concentration ability for the fungicides as compared to the other three magnetic iron(III)‐based framework composites. The extraction parameters affecting enrichment efficiency including extraction time, sample pH, elution time, and the desorption solvent were investigated and optimized. Under the optimized conditions, the standard curve of correlation coefficients were all above 0.991, the limits of detection were 0.04–0.4 μg/L, and the relative standard deviations were below 10.2%. The recoveries of two real water samples ranged from 71.1–99.1% at the low spiking level (30 μg/L). Therefore, the MIL‐101‐NH₂@Fe₃O₄‐COOH composites are attractive for the rapid and efficient extraction of fungicides from environmental water samples.     

Novel Composite of Multiwalled Carbon Nanotubes and Gold Nanoparticles Stabilized by Chitosan and Hydrophilic Ionic Liquid for Direct Electron Transfer of Glucose Oxidase

A novel composite was fabricated through dispersing multiwalled carbon nanotubes (MWNTs) in gold nanoparticle (GPs) colloid stabilized by chitosan and ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium tetrafluoroborate, BMIMBF₄). Transmission electron microscopy (TEM) experiment showed that the GPs highly dispersed on the MWNTs probably due to the electrostatic interaction among GPs, MWNTs and the imidazolium cation of BMIMBF₄. X‐ray photoelectron spectroscopy (XPS) indicated that thus‐formed gold nanostructure was mediated by BMIMBF₄. When glucose oxidase (GOD) was immobilized on the composite (MWNTs‐GPs) its ultraviolet‐visible absorption spectrum kept almost unchanged. The immobilized GOD coated glassy carbon electrode (GOD/MWNTs‐GPs/GC) exhibited a pair of well‐defined peaks in 0.10 M pH 7.0 phosphate buffer solution (PBS), with a formal potential of ?0.463 V (vs. SCE). The electrochemical process involved two‐electron transfer. The electron transfer coefficient was ca.0.56 and the electron transfer rate constant was 9.36 s^?1. Furthermore, the immobilized GOD presented good catalytic activity to the oxidation of glucose in air‐saturated PBS. The K_m and I_m values were estimated to be 13.7 μM and 0.619 μA. The GOD/MWNTs‐GPs/GC electrode displayed good stability and reproducibility.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.