A novel low‐bandgap conjugated polymer based on Ru(II) bis(acetylide) complex and BODIPY moieties

A novel conjugated polymer P‐1 incorporating Ru(II) bis(acetylide) complex and borondipyrromethene (BODIPY) moieties in the main chain was synthesized by Pd‐catalyzed Sonogashira coupling reaction of diethynyl substituted BODIPY derivative ( M‐1 ) and Ru(II) bis(acetylide) complex ( M‐2 ), and the reference polymer P‐2 was obtained from the same method as preparation of P‐1 . Compared with P‐2 , Ru(II)‐containing polymer P‐1 shows low‐bandgap as 0.87 eV from cyclic voltammetry, and obvious redshifts in both UV–vis absorption and fluorescence spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1686–1692     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

Polymers with alternating anthracene and phenylene building blocks linked by ethynylene and/or vinylene units: Studying structure‐properties‐relationships

Four conjugated polymers ( P1 – P4 ) consisting of alternating anthracene‐9,10‐diyl and 1,4‐phenylene building blocks connected via ethynylene as well as vinylene ( P1 and P2 ), ethynylene‐only ( P3 ), and vinylene‐only ( P4 ) moieties, respectively, were synthesized and studied. The phenylene units in all four polymers bear 2‐ethylhexyloxy side‐chains to promote good solubility. The three polymers with vinylene units ( P1 , P2 , and P4 ) were prepared using the Horner–Wadsworth–Emmons reaction. For the synthesis of the arylene‐ethynylene polymer P3, the palladium‐catalyzed Sonogashira cross‐coupling reaction was used. The polymers were characterized by NMR, Fourier transform infrared spectroscopy, and Raman spectroscopy. Photophysical, absorption and photoluminescence, and electrochemical properties were studied. Spectroscopic ellipsometry measurements were performed to gain more insight on the optical properties. In addition, the transport properties were investigated using admittance spectroscopy. The bulk hole mobility and its dependence on the electric field were evaluated for P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 129–143     

Deep‐red emissive conjugated poly(2,6‐BODIPY‐ethynylene)s bearing alkyl side chains

Novel deep‐red emissive poly(2,6‐BODIPY‐ethynylene)s bearing dodecyl side chains (polymers A , B , and C ) have been prepared by palladium‐catalyzed Sonogashira polymerization of 2,6‐diiodo‐functionalized BODIPY monomers with 2,6‐diethynyl‐functionalized BODIPY monomers. These polymers emit in the deep‐red region with emission maxima at up to 690 nm, and exhibit significant red shifts (up to 166 and 179 nm) of both absorption and emission maxima compared with their parent BODIPY dyes due to significant extension of π‐conjugation. These polymers possess good thermal stability with decomposition temperature between 270 and 360 °C. The polymers exhibit a little larger Stokes shifts and shorter lifetime than their corresponding BODIPY dyes. The solid state thin films of polymers A , B , and C emit in near‐infrared region between 723 and 743 nm, and show significantly red shifts (up to 57 nm) in absorption and emission maxima relative to their polymer solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5354–5366, 2009     

Improved Spectral Coverage and Fluorescence Quenching in Donor–acceptor Systems Involving Indolo[3‐2‐b]carbazole and Boron‐dipyrromethene or Diketopyrrolopyrrole

A novel π‐conjugated triad and a polymer incorporating indolo[3,2‐b]‐carbazole (ICZ) and 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) were synthesized via a Sonogashira coupling. Compared to the parent BODIPY the absorption and fluorescence spectrum were for both compounds broader and redshifted. The redshift of the fluorescence and the decrease of the fluorescence quantum yield and decay time upon increasing solvent polarity were attributed to the formation of a partial charge‐transfer state. Upon excitation in the ICZ absorption band the ICZ fluorescence was quenched in both compounds mainly due to energy transfer to the BODIPY moiety. In a similar ICZ–π–DPP polymer (where DPP is diketopyrrolopyrrole), a smaller redshift of the absorption and fluorescence spectra compared to the parent DPP was observed. A less efficient quenching of the ICZ fluorescence in the ICZ–π–DPP polymer could be related to the unfavorable orientation of the transition dipoles of ICZ and DPP. The rate constant for energy transfer was for all compounds an order of magnitude smaller than predicted by Förster theory. While in a solid film of the triad a further redshift of the absorption maximum of nearly 100 nm was observed, no such shift was observed for the ICZ–π–BODIPY polymer.     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Alternating π‐conjugated block copolymers with precise block length

A Sonogashira polycondensation reaction has been used to synthesize copolymers consisting of alternating oligo(p‐phenyleneethynylene) with a precise block length as an electron‐rich component and 1,4‐bis(2‐phenylene‐2‐cyanovinylene)benzene or 2,6‐bis(2‐pyridinylene‐ethynylene)pyridine as an electron‐poor component. The copolymers differ in the length of the phenyleneethynylene block (trimer or pentamer) and the content of the electron‐poor component. The length of the phenyleneethynylene block has no influence on the maximum wavelength. The electron‐poor cyano‐block component lowers the optical band‐gap energy of the copolymers. The value is equivalent to that of poly(cyano‐phenylenevinylene) (CN‐PPV) (2.3–2.4 eV). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3574–3587, 2005     

Highly near‐infrared photoluminescence from aza‐borondipyrromethene‐based conjugated polymers

Near‐infrared (NIR) emissive conjugated polymers were prepared by palladium‐catalyzed Sonogashira polymerization of diiodobenzene‐functionalized aza‐borondipyrromethene (Aza‐BODIPY) monomers, which were substituted at 3 and 5 or 1 and 7 positions on the Aza‐BODIPY core, with 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene or 3,3′‐didodecyl‐2,2′‐diethynyl‐5,5′‐bithiophene. The structures of the polymers were confirmed by ¹H NMR, ¹³C NMR, ¹¹B NMR, Fourier transform infrared (FT‐IR) spectroscopies, and size exclusion chromatography (SEC). The optical properties were then characterized by UV–vis absorption and photoluminescence (PL) spectroscopies, and theoretical calculation using density‐functional theory (DFT) method. The polymers were fusible and soluble in common organic solvents including tetrahydrofuran (THF), o‐xylene, toluene, CHCl₃, and CH₂Cl₂, etc. The UV–vis absorption and PL spectra of the polymers shifted to long wavelength region in comparison with simple Aza‐BODIPY as the counterpart because of extended π‐conjugation of the polymers. The polymers efficiently emitted NIR light with narrow emission bands at 713～777 nm on excitation at each absorption maximum. Especially, the polymer attached 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene to 3,5‐position on the core revealed intense quantum yields (?_F = 24%) in this NIR region (753 nm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel aryl‐ethynylene polymers of tuned rigidity/flexibility

New poly(aryl‐ethynylene) polymers of tuned rigidity/flexibility were synthesized by a palladium‐catalyzed polycondensation. The Sonogashira–Hagihara‐type coupling reaction of 2,5‐diethynyl‐4‐dodecyltoluene with 2,5‐ and/or 3,5‐dibromopyridine led to polymers of different rigidity/flexibility simply by varying the ratio of 2,5‐ to 3,5‐dibromopyridine charged in the polycondensation reaction. The ratio of para–meta linkages at the pyridine moiety in the polymer backbone was determined by NMR spectroscopy. The combination of molecular weight data obtained from vapor pressure osmometry and the use of oligomeric model compounds allowed us to establish a polymer‐specific gel permeation chromatography calibration. Information about the molecular conformation of the polymers in solution were obtained by small‐angle X‐ray scattering (SAXS) experiments. The glass‐transition and melting temperatures varied systematically with the degree of rigidity/flexibility and could be directly related to the conformational changes as reflected from the SAXS data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1919–1933, 2004     

Novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer: Design,synthesis, and properties

A novel fluorescent (p‐phenylene ethynylene)‐calix[4]arene‐based polymer ( CALIX‐PPE ) has been successfully synthesized by cross‐coupling polymerization of bis‐calix[4]arene 1 with 1,4‐diethynylbenzene. The polycondensation was carried out in toluene/NEt₃ at 35 °C for 24 h, using PdCl₂(PPh₃)₂/CuI as the catalytic system, furnishing CALIX‐PPE in excellent isolated yields (higher than 95%, several runs). The yellow polymer is freely soluble in several nonprotic organic solvents. The GPC trace of the isolated polymer showed a monomodal distribution and a number‐average molecular weight of 23,300 g mol^?1 (M_w/M_n = 2.05). No evidence was found in the structural analysis (FTIR and ¹H/¹³C NMR) regarding the formation of alkyne homocoupled segments along the polymer chain. For comparative purposes, the synthesis of an analogous poly(p‐phenylene ethynylene) containing p‐t‐butyl‐phenoxymethyl side chains ( TBP‐PPE ) was also undertaken. A great similarity was found between the photophysical properties of CALIX‐PPE and TBP‐PPE in solution (UV–vis and laser induced luminescence), clearly demonstrating their unique dependence on the structure and conformation of the conjugated PPE backbone. The fluorescence spectra of polymers are of nearly identical shape, displaying their maximum emission around 420 nm. The calculated solution photoluminescence quantum yields of CALIX‐PPE and TBP‐PPE are of similar magnitude (?_{F( CALIX‐PPE )} = 0.43; ?_{F( TBP‐PPE )} = 0.51). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6477–6488, 2008     

Molecular weight analysis of water‐soluble poly(phenylene ethynylene)s using MALDI‐TOF MS

Molecular weights of seven poly(phenylene ethynylene)‐based water‐soluble conjugated polyelectrolytes (CPEs) obtained through Sonogashira coupling are determined by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). A standard sample preparation protocol is developed to characterize the seven CPEs using 2,5‐dihydroxybenzoic acid as the matrix (M) and AgTFA as the cationization reagent (CR). High‐quality MALDI mass spectra are obtained at volume mixing ratios (CPE/M/CR) of 5/5/1 for anionic polymers (P1–P4) and 5/50/1 for cationic polymers (P5–P7). Molecular weight, molecular weight distribution, and end‐group information are analyzed. The effects of molecular weight of CPEs on optical and quenching properties are also studied. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2537–2543     

Direct Heteroarylation versus Stille Polycondensation Reaction for the Synthesis of TQ1 Conjugated Polymer

We report a facile synthesis of the well‐known and highly promising conjugated polymer TQ1 using eco‐friendly direct heteroarylation reaction. Optimization of the reaction conditions yielded the target polymer with good optoelectronic and charge‐transport characteristics. The TQ1 polymer obtained in the direct heteroarylation reaction delivered power conversion efficiency of ～5% in organic bulk heterojunction solar cells, which matches well the characteristics of the reference devices assembled using TQ1 batch synthesized via conventional Stille polycondensation reaction. The obtained results highlight the potential of the direct heteroarylation reaction as an efficient and environment‐friendly alternative to Stille cross‐coupling in the design of high‐quality semiconductor materials for organic electronics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 776–782     

Size‐controlled synthesis of soluble‐conjugated microporous polymer nanoparticles through sonogashira polycondensation in confined nanoreactors

Soluble conjugated polymeric nanoparticles were synthesized through Sonogashira polycondensation between different combinations of multifunctional alkynes and aryl halides in structurally well‐defined mesoporous reactors. The growth of the polymeric nanoparticles was controlled by the spatial confinement of the nanoreactors, giving conjugated polymeric nanoparticles with narrow size distribution centered at 5 nm. All the obtained polymers are freely soluble in common solvents and can be fabricated into thin film. Both of the solution and thin film prepared from these polymeric nanoparticles were highly fluorescent, endowing them potential applications in light emitting and other optoelectronic fields. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2285–2290     

Influence of linkage chemistry on folding,self-assembly,and photoresponse of amphiphilic azobenzene main chain polymers

Two types of amphiphilic polymers composed of azobenzene repeat units in the main chain connected either via ethynylene (acetylene) or butadiynylene (diacetylene) linkages and carrying oligo(ethylene glycol) side chains were reported. Synthesis was accomplished by polycondensation involving Sonogashira–Hagihara cross coupling and Glaser coupling, respectively. Solvent titration experiments revealed that both polymers fold into stable helices in a polar environment. While the ethynylene-bridged polymer resembled the behavior of its oligomeric counterparts, introduction of the extended diacetylene unit strengthened π,π-stacking interactions in case of the butadiynylene-bridged polymer leading to a pronounced aggregation tendency and suppressing photoisomerization in the folded state. Our study demonstrates the importance of backbone connectivity to balance intra- and intermolecular forces for the successful design of photoresponsive polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 313–318     

Ordered nanostructures from self‐assembly of H‐shaped coil–rod–coil molecules

A new class of π‐conjugated, skewed H‐shaped oligomers, consisting of biphenyl, phenylene vinylene, and phenylene ethynylene units as the rigid segment, were synthesized via Sonogashira coupling and Wittig reactions. The coil segments of these molecules were composed of poly(ethylene oxide) (PEO) or PEO with lateral methyl groups between the rod and coil segment, respectively. The experimental results revealed that the lateral methyl groups attached to the surface of the rod and coil segments dramatically influenced the self‐assembling behavior of the molecules in the crystalline phase. H‐shaped rod–coil molecules containing a lateral methyl group at the surface of the rod and PEO coil segments self‐assemble into a two‐dimensional columnar or a three‐dimensional body‐centered tetragonal nanostructures in the crystalline phase, whereas molecules lacking a lateral methyl group based on the PEO coil chain self‐organize into lamellar or hexagonal perforated lamellar nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 85–92     

Surface‐Grafted conjugated polymers for hybrid cellulose materials

Conjugated polymers were grafted onto cellulose substrates in an effort to create a general method for the synthesis of conjugated polymer/cellulose hybrid materials. In this report, we describe the grafting of poly(fluorene), poly(fluorenevinylene), and a poly(fluorene‐ethynylene‐phenylene) onto modified cellulose paper substrates using Suzuki, Heck, and Sonogashira‐type polymerizations, respectively. The application of these three widely used coupling chemistries to surface‐grafted conjugated polymers on cellulose provides a general route to cellulose‐based hybrid materials tunable with almost any aromatic repeat structure for specific applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of hyperbranched polymers with precise conjugation length

A set of AB₂ type monodisperse conjugated oligomers carrying two bromo functional groups and one boronic ester functional group were prepared by iterative deprotection and Sonogashira cross‐coupling reactions. Suzuki polycondensation of these AB₂ type monodisperse oligomers afforded hyperbranched polymers. The hyperbranched conjugated polymers we prepared possess not only precisely controlled conjugation length like monodisperse conjugated oligomers but also the structural feature of hyperbranched polymers. Optical property investigation demonstrated that the maximum absorption and emission wavelength red‐shifted along with the increasing of the conjugation length between the two branching points and the hyperbranched structure could effectively reduce the aggregation of the conjugated polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1084–1092, 2007     

Synthesis and properties of sulfur‐contained poly(silylene arylacetylene)s

Poly(silylene arylacetylene) (PSA) is a kind of poly(arylacetylene) silicon‐containing resins with excellent heat resistance and good mechanical performances. In this article, the sulfur atom is introduced into the main chain of the PSA molecule to obtain a sulfur‐containing poly(silylene arylacetylene), named S‐PSA. By Williamson and Sonogashira reactions, bis(4‐ethynylphenyl)sulfide and bis(4‐ethynylphenyl)sulfone were synthesized. Thereafter, through Grignard reagent way, the poly(silylene ethynylene phenylene sulfide phenylene ethynylene) (PSESE) and poly(silylene ethynylene phenylene sulfone phenylene ethynylene) (PSESO₂E) were synthesized from bis(4‐ethynylphenyl)sulfide, bis(4‐ethynylphenyl)sulfone, and methylphenyl dichlorosilane. Poly(silylene ethynylene phenylene sulfoxide phenylene ethynylene) (PSESOE) was synthesized by the oxidation of PSESE. The structures and properties of these resins were characterized and the mechanical properties of the T300 reinforced composites were tested. The results show that the novel S‐PSA resins have excellent heat resistance and good mechanical properties, and could be used as resin matrices for high‐performance composites in high‐tech fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2324–2332     

Tuning the optical properties of ethynylene triptycene‐based copolymers via oxidation of their alkyne groups into α‐diketones

The synthesis of ethynylene triptycene‐based copolymers with various aromatic spacers ( 3a–d ) is reported using the palladium‐catalyzed Sonogashira cross‐coupling reaction. The alkyne groups of 3a–d were oxidized into their respective α‐diketone copolymers 4a–d . Formation of 3,4a–d was confirmed by several characterization techniques, such as, gel permeation chromatography (GPC), ¹H and ¹³C nuclear magnetic resonance (NMR), FT‐infrared (FTIR), UV–vis absorption, and emission spectroscopies. It was found that the nature of the aromatic spacer influences the emission properties of the target α‐diketone triptycene copolymers, causing either a red or blue‐shift with respect to that of their ethynylene triptycene copolymer synthons. Copolymers 4a–c with fluorene spacers reveal emission in the range of 440–475 nm, thus, qualifying them to act as blue emitters. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 931–937     

Persistent and emission color tunable poly(phenylene‐ethynylene)s covered with polyhedral oligomeric silsesquioxanes

The development of chemically and thermally persistent blue‐, and green‐luminescent hybrid π‐conjugated polymers consisting of poly(phenylene‐ethynylene) conjugated backbone wrapped with the rigid three‐dimensional polyhedral oligomeric silsesquioxane (POSS) units was successfully achieved by means of the Sonogashira‐Hagihara coupling reaction. Because of the steric effect of POSS units, the luminescence stability of the conjugated backbone was significantly enhanced. Moreover, emission color was also easily tunable only by changing the ratio of POSS moieties incorporated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8112–8116, 2008