An experimental and computational approach to pH‐dependent self‐aggregation of poly(2‐isopropyl‐2‐oxazoline)

Besides temperature, self‐aggregation of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) can also be triggered via pH in aqueous solution (25 °C, pH > 5). Lowest energy structures and interaction energies of PIPOX with H₃O⁺, OH^?, and H₂O were calculated by DFT methods showed that, in addition to their ability to protonate PIPOX, H₃O⁺ ions had strong interaction with both water and PIPOX in acidic conditions. H₃O⁺ ions acted as compatibilizer between PIPOX and water and increased the solubility of PIPOX. OH^? ions were found to have stronger interaction with water compared to PIPOX resulting in desorption of water molecules from PIPOX phase and decreased solubility, leading to enhanced hydrophobic interactions among isopropyl groups of PIPOX and formation of aggregates at high pH. Results concerning the effect of end‐groups on aggregate size were in good agreement with statistical mechanics calculations. Moreover, the effect of polymer concentration on the aggregate size was examined. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 210–221     

Alternative Synthesis of 2‐Hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one

The 2‐hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one ( 1 ) was synthesized in 42% yield by rearrangement of epoxy ketone 10 on treatment with BF₃⋅Et₂O under anhydrous conditions. Intermediate 10 was available from the known enone 8 , either via direct epoxidation (60% H₂O₂, NaOH, MeOH; yield 50%), or via reduction to the corresponding allylic alcohol 14 (LiAlH₄, THF), followed by epoxidation ([VO(acac)₂], ^tBuOOH) and reoxidation under Swern conditions, in 37% total yield.     

One‐Pot Regioselective Synthesis of Novel Oximino Ester‐Containing 1‐Aryl‐4‐chloro‐3‐oxypyrazoles as Potential Fungicides

A novel, functional‐group‐tolerant, and highly regioselective one‐pot synthesis of six 4‐chloro‐1‐aryl‐3‐oxypyrazoles, 8a – 8f , containing an oximino ester moiety has been developed. Their structures were characterized by ¹H‐ and ¹³C‐NMR, IR, MS, and elemental analyses. The regioselectivity of the reaction was also determined by single‐crystal X‐ray diffraction analysis of product 8d . The reaction pathway, proposed with the aid of DFT calculations, likely proceeds via a DMF‐catalyzed mechanism, which involves an electrophilic attack by SOCl₂ and two nucleophilic substitutions by benzyl bromide (BnBr) and Cl^?, respectively, as the key steps. A preliminary in vitro bioassay indicated that most compounds exhibited good fungicidal activities against Sclerotinia sclerotiorum and Gibberella zeae. Especially, 8d and 8e displayed higher or similar fungicidal activities compared with pyraclostrobin at the concentration of 10 μg/ml.     

Isothiourea‐based lewis pairs for homopolymerization and copolymerization of 2,2‐dimethyltrimethylene carbonate with ε‐caprolactone and ω‐pentadecalactone

In this study, the homopolymerization of 2,2‐dimethyltrimethylene carbonate (DTC) and its copolymerizations with ε‐caprolactone (CL) were carried out in detail using the isothiourea‐based Lewis pairs comprised 2,3,6,7‐tetrahydro‐5H‐thiazolo(3,2‐a)pyrimidine and magnesium halides (MgX₂) with benzyl alcohol (BnOH) as the initiator. The copolymerization of DTC and CL via one‐pot addition produced randomly sequenced copolymers. On the other hand, a well‐defined linear poly(ε‐caprolactone)–block–poly(2,2‐dimethyltrimethylene carbonate) (PCL‐b‐PDTC) diblock copolymer was prepared by simple sequential ring‐opening polymerization of CL and DTC. In addition, poly(ω‐pentadecalactone)–block–PDTC diblock copolymer was successfully prepared by the same strategy. Moreover, PDTC–poly(ethylene glycol) (PEG)–PDTC triblock copolymer was synthesized in the presence of PEG 2000. The effects of different polymerization conditions on the polymerization reactions have been systematically discussed. The resulting polymers were characterized by the ¹H and ¹³C NMR spectra, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐ToF MS). The block copolyester structures were confirmed by the ¹³C NMR spectroscopy and DSC characterizations. These results indicated that the supposed mechanism was a dual catalytic mechanism. The proposed mechanism involved activation of the monomer via coordination to the MgX₂, and the initiator alcohol was deprotonated by base. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2349–2355     

Radical copolymerization of chlorotrifluoroethylene with 4‐bromo‐3,3,4,4‐tetrafluorobut‐1‐ene

The radical copolymerization of chlorotrifluoroethylene (CTFE) with 3,3,4,4‐tetrafluoro‐4‐bromobut‐1‐ene (BTFB) initiated by tert‐butylperoxypivalate is presented. The microstructures of the obtained copolymers are determined by means of NMR spectroscopies and elemental analysis and show that random copolymers were obtained. A wide range of poly(CTFE‐co‐BTFB) copolymers is synthesized, containing from 17 to 89 mol % of CTFE. In all the cases, CTFE is the less reactive of both comonomers. T_d^10% values, ranging from 163 up to 359 °C, are dependent on the BTFB content. These variations of thermal property are attributed to the increase in the number of C‐H and C‐Br bonds breakdown when the BTFB molar percentage in the copolymer is higher. T_g values range from 19 to 39 °C and a decreasing trend is observed when increasing the amount of BTFB in the copolymer. This observation arises from the higher flexibility of the copolymer when increasing the number of fluorobrominated lateral chains. These original fluoropolymers bearing reactive pendant bromo groups are suitable candidates for various applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1714–1720     

Blue light‐emitting hyperbranched polymers using fluorene‐co‐dibenzothiophene‐S,S‐dioxide as branches

A series of blue light‐emitting hyperbranched polymers comprising poly(fluorene‐co‐dibenzothiophene‐S,S‐dioxide) as the branch and benzene, triphenylamine, or triphenyltriazine as the core were synthesized by an “A₂ + A₂' + B₃” approach of Suzuki polymerization, respectively. All resulted copolymers exhibited quite comparable thermal properties with the glass transition temperatures in the range of 59–68 °C and relatively high decomposition temperatures over 420 °C. Photoluminescent spectra exhibited slight variation with the molar ratio of the dibenzothiophene‐S,S‐dioxide unit and the size of the core units. Polymer light‐emitting devices demonstrated blue emission with excellent stability of electroluminescence. Copolymers based on smaller core units of benzene and triphenylamine exhibited enhanced device performances regarding to that of triphenyltriazine. With the device configuration of ITO/PEDOT:PSS/polymer/CsF/Al, a maximum luminous efficiency of 4.5 cd A^?1 was obtained with Commission Internationale de L'.Eclairage (CIE) coordinates of (0.16, 0.19) for the copolymer PFSO15B. These results indicated that hyperbranched structure can be a promising strategy to attain spectrally stable blue‐light‐emitting polymers with high efficiency. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1043–1051     

Supramacromolecular chemistry: Self‐assembly of polystyrene‐based multi‐armed pseudorotaxane star polymers from multi‐topic C60 derivatives

Multitopic dibenzylammonium derivatives ( 4 ) of C₆₀ were prepared by Bingel reactions of C₆₀ with a malonate diester ( 2 ) containing two t‐BOC protected dibenzylamine moieties, followed by deprotection and protonation. Self‐assembly of model pseudorotaxanes 5 from the multidibenzylammonium C₆₀ derivatives with dibenzo‐24‐crown‐8 was studied by ¹H NMR spectroscopy and mass spectrometry. Self‐assembly of linear and star‐shaped pseudorotaxanes 8 with up to 12 arms based on polystyrenes bearing terminal DB24C8 host units ( 7 ) and the guest functionalized C₆₀ salts was demonstrated by ¹H NMR spectroscopy and solution phase viscometry. These studies provide further evidence of the potential of supramacromolecular chemistry in construction of complex polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6472–6495, 2009     

Disentangling steric and electronic factors in monomeric bis(2‐bromo‐4‐chloro‐6‐{[(2‐hydroxyethyl)imino]methyl}phenolato‐κ2N,O)copper(II)

The title compound, [Cu(C₉H₈BrClNO₂)₂], is a square‐planar complex. The potentially tridentate dibasic 2‐bromo‐4‐chloro‐6‐{[(2‐hydroxyethyl)imino]methyl}phenolate ligand coordinates in a trans‐bis fashion to the Cu^II centre via the imine N and phenolate O atoms. The Cu^II atom lies on the centre of inversion of the molecule. The potentially coordinating hydroxyethyl group remains protonated and uncoordinated, taking part in intermolecular hydrogen bonds with vicinal groups, leading to the formation of a two‐dimensional hydrogen‐bond network with sheets parallel to the (10) plane. Substituent effects on the crystal packing and coordination modes of the ligand are discussed.     

Macrocyclization of polymers via ring‐closing metathesis and azide/alkyne‐“click”‐reactions: An approach to cyclic polyisobutylenes

The end‐to‐end cyclization of telechelic polyisobutylenes (PIB's) toward cyclic polyisobutylenes is reported, using either ring‐closing metathesis (RCM) or the azide/alkyne‐“click”‐reaction. The first approach uses bisallyl‐telchelic PIB's (M_n = 1650, 3680, 9770 g mol^?1) and Grubbs 1st‐, 2nd‐, and 3rd‐generation catalyst leading to cyclic PIB's in 60–80% yield, with narrow polydispersities (M_w/M_n = 1.25). Azide/alkyne‐“click”‐reactions of bisalkyne‐telechelic PIB's (M_n = 3840 and 9820 g mol^?1) with excess of 1,11‐diazido‐undecane leads to the formation of mixtures of linear/cyclic PIB's under formation of oligomeric cycles. Subsequent reaction of the residual azide‐moieties in the linear PIB's with excess of alkyne‐telechelic PEO enables the chromatographic removal of the resulting linear PEO‐PIB‐block copolymers by column chromatography. Thus pure cyclic PIB's can be obtained using this double‐“click”‐method, devoid of linear contaminants. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 671–680, 2010     

4‐(3‐Azaniumylpropyl)morpholin‐4‐ium chloride hydrogen oxalate: an unusual example of a dication with different counter‐anions

The mixed organic–inorganic title salt, C₇H₁₈N₂O²⁺·C₂HO₄⁻·Cl⁻, forms an assembly of ionic components which are stabilized through a series of hydrogen bonds and charge‐assisted intermolecular interactions. The title assembly crystallizes in the monoclinic C2/c space group with Z = 8. The asymmetric unit consists of a 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dication, a hydrogen oxalate counter‐anion and an inorganic chloride counter‐anion. The organic cations and anions are connected through a network of N—H...O, O—H...O and C—H...O hydrogen bonds, forming several intermolecular rings that can be described by the graph‐set notations R₃³(13), R₂¹(5), R₁²(5), R₂¹(6), R₂³(6), R₂²(8) and R₃³(9). The 4‐(3‐azaniumylpropyl)morpholin‐4‐ium dications are interconnected through N—H...O hydrogen bonds, forming C(9) chains that run diagonally along the ab face. Furthermore, the hydrogen oxalate anions are interconnected via O—H...O hydrogen bonds, forming head‐to‐tail C(5) chains along the crystallographic b axis. The two types of chains are linked through additional N—H...O and O—H...O hydrogen bonds, and the hydrogen oxalate chains are sandwiched by the 4‐(3‐azaniumylpropyl)morpholin‐4‐ium chains, forming organic layers that are separated by the chloride anions. Finally, the layered three‐dimensional structure is stabilized via intermolecular N—H...Cl and C—H...Cl interactions.     

Poly[(2‐alkoxy‐5‐methyl‐1,3‐phenylene vinylene)‐alt‐(phenylene vinylene)] derivatives with different contents of cis‐ and trans‐olefins: The effect of the olefin bond geometry and conjugation length on luminescence

Poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)]s ( 8 ) and poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)]s ( 10 ) were synthesized by the Wittig reaction to provide materials containing 45–62% cis‐vinylene bonds. The optical characteristics of 8 and 10 were compared with those of their respective isomers, 3 and 4 , the cis‐vinylene contents of which were significantly lower (9–16%). Although a greater fraction of cis‐CH?CH linkages caused the absorption maximum (λ_max) of 8 and 10 to be slightly blueshifted (by ～3–6 nm) from that of 3 and 4 , the impact of the vinylene bond geometry appeared to be negligible on their fluorescence spectra. The fluorescence quantum efficiencies of 8 and 10 were estimated to be approximately 0.25 and 0.72, respectively. Both 8 (λ_max ≈ 445 or 462 nm) and 10 (λ_max ≈ 480 or 506 nm) were electroluminescent, showing effective color tuning by the controlled insertion of m‐phenylene moieties. The external electroluminescence quantum efficiencies were determined to be 4.26 × 10^?3% for 8 and 0.63% for 10 . The cis/trans‐vinylene bond ratio had a great impact on the electroluminescence device performance of 8 but a much smaller impact on the performance of 10 . © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 303–316, 2004     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

A twofold interpenetrating three‐dimensional CdII coordination framework: poly[[μ2‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene](μ3‐5‐nitrobenzene‐1,3‐dicarboxylato)cadmium(II)]

A twofold interpenetrating three‐dimensional Cd^II coordination framework, [Cd(C₈H₃NO₆)(C₁₄H₁₄N₄)]_n, has been prepared and characterized by IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The asymmetric unit consists of a divalent Cd^II atom, one 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,3‐BMIB) ligand and one fully deprotonated 5‐nitrobenzene‐1,3‐dicarboxylate (NO₂‐BDC²⁻) ligand. The coordination sphere of the Cd^II atom consists of five O‐donor atoms from three different NO₂‐BDC²⁻ ligands and two imidazole N‐donor atoms from two different 1,3‐BMIB ligands, forming a distorted {CdN₂O₅} pentagonal bipyramid. The NO₂‐BDC ligand links three Cd^II atoms via a μ₁‐η¹:η¹ chelating mode and a μ₂‐η²:η¹ bridging mode. The title compound is a twofold interpenetrating 3,5‐connected network with the {4².6⁵.8³}{4².6} topology. In addition, the compound exhibits fluorescence emissions in the solid state at room temperature.     

Deep‐blue light‐emitting polyfluorenes with asymmetrical naphthylthio‐fluorene as Chromophores

A novel blue polycyclic aromatic compound 2,8‐dibromo‐14,14‐dioctyl‐14H‐benzo[b]benzo [5,6] fluoreno[1,2‐d]thiophene 9,9‐dioxide (Br₂NFSO) is designed and synthesized through multistep synthesis, and its structure is confirmed by nuclear magnetic resonance. Based on synthesized polycyclic aromatic compound Br₂NFSO, a series of twisted blue light‐emitting polyfluorenes derivatives (PNFSOs) are prepared by one‐pot Suzuki polycondensation. Based on the twisted polymer molecular structure resulted from the asymmetric links of 14,14‐dioctyl‐14H‐benzo[b]benzo[5,6]fluoreno[1,2‐d]thiophene 9,9‐dioxide (NFSO) unit in copolymers and better electron transport ability of NFSO than those of the electron‐deficient dibenzothiophene‐S,S‐dioxide counterpart, the resulting polymers exhibit excellent electroluminescent spectra stability in the current densities from 100 to 800 mA cm^?2, and show blue‐shifted and narrowed electroluminescent spectra with the Commission Internationale de L′Eclairage (CIE) of (0.16, 0.07) for PNFSO5, compared to poly(9,9‐dioctylfluorene) (PFO) with the CIE of (0.18, 0.18). Moreover, the superior device performance is achieved based on PNFSO5 with the maximum luminous efficiency (LE_max) of 1.96 cd A^?1, compared with the LE_max of 0.49 cd A^?1 for PFO. The results indicate that the twisted polycyclic aromatic structure design strategy has a great potential to tuning blue emission spectrum and improving EL efficiency of blue light‐emitting polyfluorenes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 171–182     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

A sulfur coordination polymer with wide bandgap semiconductivity formed from zinc(II) and 5‐methylsulfanyl‐1,3,4‐thiadiazole‐2‐thione

The sulfur coordination polymer catena‐poly[zinc(II)‐μ₂‐bis[5‐(methylsulfanyl)‐2‐sulfanylidene‐2,3‐dihydro‐1,3,4‐thiadiazol‐3‐ido‐κ²N³:S]], [Zn(C₃H₃N₂S₃)₂]_n or [Zn₂MTT₄]_n, constructed from Zn²⁺ ions and 5‐methylsulfanyl‐1,3,4‐thiadiazole‐2‐thione (HMTT), was synthesized successfully and structurally characterized. [Zn₂MTT₄]_n crystallizes in the tetragonal space group I (No. 82). Each MTT^? ligand (systematic name: 5‐methylsulfanyl‐2‐sulfanylidene‐2,3‐dihydro‐1,3,4‐thiadiazol‐3‐ide) coordinates to two different Zn^II ions, one via the thione group and the other via a ring N atom, with one Zn^II atom being in a tetrahedral ZnS₄ and the other in a tetrahedral ZnN₄ coordination environment. These tetrahedral ZnS₄ and ZnN₄ units are alternately linked by the organic ligands, forming a one‐dimensional chain structure along the c axis. The one‐dimensional chains are further linked via C—H…N and C—H…S hydrogen bonds to form a three‐dimensional network adopting an ABAB‐style arrangement that lies along both the a and b axes. The three‐dimensional Hirshfeld surface analysis and two‐dimensional (2D) fingerprint plots confirm the major interactions as C—H…S hydrogen bonds with a total of 35.1%, while 7.4% are C—H…N hydrogen‐bond interactions. [Zn₂MTT₄]_n possesses high thermal and chemical stability and a linear temperature dependence of the bandgap from room temperature to 270 °C. Further investigation revealed that the bandgap changes sharply in ammonia, but only fluctuates slightly in other solvents, indicating its promising application as a selective sensor.     

Synthesis and characterization of light‐emitting oligo(p‐phenylene‐vinylene)s and polymeric derivatives containing three‐ and five‐conjugated phenylene rings. II. Electro‐optical properties and optimization of PLED performance

A series of multilayer polymeric light‐emitting diodes (PLEDs) containing an electron‐transporting layer (ETL), that is tris(8‐quinolinolato)‐aluminum(III) (Alq) and 2,2′,2″‐(1,3,5‐phenylene)‐tris[1‐phenyl‐1H‐benzimidazole] (TPBI), were fabricated by doping fluorescent oligo(p‐phenylene‐vinylene)s (BIII and BV) and polymer derivatives (PBV) into poly(N‐vinyl carbazole) (PVK). These PLEDs can be optimized by the design of multilayer device configurations (brightness increased 8–15 times by addition of ETL) and possess greenish electroluminescent (EL) spectra peaked about 500–540 nm. A remarkably high brightness of 56,935 cd/m² with a power efficiency of 3.25 lm/W was obtained in the device of PVK:BVOC₈‐OC₈ (100:20)/Alq (60 nm/60 nm). It suggests that the emission mechanism (including the conjugated and excimer emissions of BVOC₈‐OC₈ emitters) originates from both of BVOC₈‐OC₈ and ETL (Alq and TPBI) by varying the concentration of chromophores and adjusting the thickness of ETL. The concentration effect of the emitters in PVK (i.e. PVK:BVOC₈‐OC₈ = 100:5, 100:20, and 100:100 wt %) and the influence of the ETL (including its thickness) on the EL characteristics are also reported. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2922–2936, 2006     

A two‐stage surface treatment for the long‐term stability of hydrophilic SU‐8

The use of SU‐8 photoresist as a structuring material for portable capillary‐flow cytometry devices has been restricted by the near‐hydrophobic nature of the SU‐8 surface. In this work, we evaluate the use of chemical and plasma treatments to render the SU‐8 surface hydrophilic and characterise the resulting surface utilising a combination of techniques including contact angle goniometry, atomic force microscopy and X‐ray photoelectron spectroscopy. In particular, for low‐power plasma treatments, we find that the chemistry of the plasma used to modify the SU‐8 surface and the incorporation of O₂ on that modified surface are paramount for improved surface wettability, whilst plasma‐induced surface roughness is not a necessary requirement. We demonstrate a technique to obtain a hydrophilic SU‐8 surface with contact angle as low as 7° whilst controlling and significantly reducing the level of surface roughness generated via the applied plasma. An additional chemical treatment step is found to be essential to stabilise the activated SU‐8 surface, and incubation of the samples with ethanolamine is demonstrated as an effective second‐stage treatment. Application of the optimised two‐stage surface treatment to cross‐linked SU‐8 is shown to result in a smooth hydrophilic surface that remains stable for over 3 months. Copyright © 2015 The Authors Surface and Interface Analysis Published by John Wiley & Sons Ltd.     

Preparation of polyhedral oligomeric silsesquioxane‐containing block copolymer with well‐controlled stereoregularity

Preparation of functional domains with a spacing of 10 nm is a benchmark set to fabricate next‐generation electronic devices. Organic–inorganic block copolymers form well‐ordered microphase separations with very small domain sizes. The design and preparation of a novel block copolymer consisting of syndiotactic polymethyl methacrylate (st‐PMMA) and polyhedral oligomeric silsesquioxane (POSS)‐functionalized polymethacrylate, designated as st‐PMMA‐b‐PMAPOSS, which can recognize functional molecules, are reported. The st‐PMMA segments form a helical structure and encapsulate C₆₀ in the helical nanocavity, leading to the formation of an inclusion complex. Although the ordering of the domains is not high, C₆₀ domains that are in a quasi‐equilibrium state, with about 10‐nm domain spacings, are generated using st‐PMMA‐b‐PMAPOSS that can recognize functional molecules. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2181–2189     

Synthesis,crystal structures and anti‐inflammatory activity of fluorine‐substituted 1,4,5,6‐tetrahydrobenzo[h]quinazolin‐2‐amine derivatives

Two fluorine‐substituted 1,4,5,6‐tetrahydrobenzo[h]quinazolin‐2‐amine (BQA) derivatives, namely 2‐amino‐4‐(2‐fluorophenyl)‐9‐methoxy‐1,4,5,6‐tetrahydrobenzo[h]quinazolin‐3‐ium chloride, ( 8 ), and 2‐amino‐4‐(4‐fluorophenyl)‐9‐methoxy‐1,4,5,6‐tetrahydrobenzo[h]quinazolin‐3‐ium chloride, ( 9 ), both C₁₉H₁₉FN₃O⁺·Cl^?, were generated by Michael addition reactions between guanidine hydrochloride and the α,β‐unsaturated ketones (E)‐2‐(2‐fluorobenzylidene)‐7‐methoxy‐3,4‐dihydronaphthalen‐1(2H)‐one, C₁₈H₁₅FO₂, ( 6 ), and (E)‐2‐(4‐fluorobenzylidene)‐7‐methoxy‐3,4‐dihydronaphthalen‐1(2H)‐one, ( 7 ). Because both sides of α,β‐unsaturated ketones ( 6 ) or ( 7 ) can be attacked by guanidine, we obtained a pair of isomers in ( 8 ) and ( 9 ). Single‐crystal X‐ray diffraction indicates that each isomer has a chiral C atom and both ( 8 ) and ( 9 ) crystallize in the achiral space group P2₁/c. The chloride ion, as a hydrogen‐bond acceptor, plays an important role in the formation of multiple hydrogen bonds. Thus, adjacent molecules are connected through intermolecular hydrogen bonds to generate a banded structure. Furthermore, these bands are linked into an interesting 3D network via hydrogen bonds and π–π interactions. Fortunately, the solubilities of ( 8 ) and ( 9 ) were distinctly improved and can exceed 50 mg ml^?1 in water or PBS buffer system (pH 7.4) at room temperature. In addition, the results of an investigation of anti‐inflammatory activity show that ( 8 ) and ( 9 ), with o‐ and p‐fluoro substituents, respectively, display more potential for inhibitory effects on LPS‐induced NO secretion than starting ketones ( 6 ) and ( 7 ).