Multiarm star block and multiarm star mixed‐block copolymers via azide‐alkyne click reaction

The synthesis of multiarm star block (and mixed‐block) copolymers are efficiently prepared by using Cu(I) catalyzed azide‐alkyne click reaction and the arm‐first approach. α‐Silyl protected alkyne polystyrene (α‐silyl‐alkyne‐PS) was prepared by ATRP of styrene (St) and used as macroinitiator in a crosslinking reaction with divinyl benzene to successfully give multiarm star homopolymer with alkyne periphery. Linear azide end‐functionalized poly(ethylene glycol) (PEG‐N₃) and poly (tert‐butyl acrylate) (PtBA‐N₃) were simply clicked with the multiarm star polymer described earlier to form star block or mixed‐block copolymers in N,N‐dimethyl formamide at room temperature for 24 h. Obtained multiarm star block and mixed‐block copolymers were identified by using ¹H NMR, GPC, triple detection‐GPC, atomic force microscopy, and dynamic light scattering measurements. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 99–108, 2010     

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels formed by macrocrosslinker as drug delivery system

Dual thermo‐ and pH‐sensitive network‐grafted hydrogels made of poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) network and poly(N‐isopropylacrylamide) (PNIPAM) grafting chains were successfully synthesized by the combination of atom transfer radical polymerization (ATRP), reversible addition‐fragmentation chain transfer (RAFT) polymerization, and click chemistry. PNIPAM having two azide groups at one chain end [PNIPAM‐(N₃)₂] was prepared with an azide‐capped ATRP initiator of N,N‐di(β‐azidoethyl) 2‐chloropropionylamide. Alkyne‐pending poly(N,N‐dimethylaminoethyl methacrylate‐co‐propargyl acrylate) [P(DMAEMA‐co‐ProA)] was obtained through RAFT copolymerization using dibenzyltrithiocarbonate as chain transfer agent. The subsequent click reaction led to the formation of the network‐grafted hydrogels. The influences of the chemical composition of P(DMAEMA‐co‐ProA) on the properties of the hydrogels were investigated in terms of morphology and swelling/deswelling kinetics. The dual stimulus‐sensitive hydrogels exhibited fast response, high swelling ratio, and reproducible swelling/deswelling cycles under different temperatures and pH values. The uptake and release of ceftriaxone sodium by these hydrogels showed both thermal and pH dependence, suggesting the feasibility of these hydrogels as thermo‐ and pH‐dependent drug release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Light and pH dual‐sensitive biodegradable polymeric nanoparticles for controlled release of cargos

In this article, a light and pH dual‐sensitive block copolymer PEG‐b‐poly(MPC‐Azo/DEA) was facilely prepared for the first time by azide‐alkyne click chemistry between amphiphilic block copolymer bearing pendant alkynyl group poly(ethylene glycol)‐poly(5‐methyl‐5‐propargylxycarbonyl‐1,3‐dioxane‐2‐one) (PEG‐b‐poly(MPC)) and two azide‐containing compounds azobenzene derivative (Azo‐N₃) and 2‐azido‐1‐ethyl‐diethylamine (DEA‐N₃). Light response of the polymeric nanoparticles benefits from the azobenzene segments and pH responsiveness is attributed to DEA moieties. The prepared copolymer could self‐assemble into spherical micelle particles. The morphological changes of these particles in response to dual stimuli were investigated by UV/vis spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Nile Red (NR) was utilized as probe, and fluorescence spectroscopy was served as an evidence for the enhanced release of cargos from polymeric nanoparticles under combined stimulation. Anticancer drug, DOX was loaded into the nanoparticles and the loaded‐DOX could be released from these nanoparticles under dual stimuli. MTT assays further demonstrated that PEG‐b‐poly(MPC) and PEG‐b‐poly(MPC‐Azo/DEA) were of biocompatibility and low toxicity against HepG2 cells as well as SMCC‐7721 cells. More importantly, the prepared DOX‐loaded nanoparticles exhibited good anticancer ability for the two cells. The synthesized light and pH dual‐sensitive biodegradable polymeric nanoparticles were expected to be platforms for precisely controlled release of encapsulated molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1773–1783     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

ABC‐type hetero‐arm star terpolymers through “Click” chemistry

Hetero‐arm star ABC‐type terpolymers, poly(methyl methacrylate)‐polystyrene‐poly(tert‐butyl acrylate) (PMMA‐PS‐PtBA) and PMMA‐PS‐poly(ethylene glycol) (PEG), were prepared by using “Click” chemistry strategy. For this, first, PMMA‐b‐PS with alkyne functional group at the junction point was obtained from successive atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMP) routes. Furthermore, PtBA obtained from ATRP of tBA and commercially available monohydroxyl PEG were efficiently converted to the azide end‐functionalized polymers. As a second step, the alkyne and azide functional polymers were reacted to give the hetero‐arm star polymers in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine ( PMDETA) in DMF at room temperature for 24 h. The hetero‐arm star polymers were characterized by ¹H NMR, GPC, and DSC. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5699–5707, 2006     

One‐pot preparation of 3‐miktoarm star terpolymers via click [3 + 2] reaction

The preparation of 3‐miktoarm star terpolymers using nitroxide mediated radical polymerization (NMP), ring opening polymerization (ROP), and click reaction [3 + 2] are carried out by applying two types of one‐pot technique. In the first one‐pot technique, NMP of styrene (St), ROP of ε‐caprolactone (ε‐CL), and [3 + 2] click reaction (between azide end‐functionalized poly(ethylene glycol) (PEG‐N₃)/or azide end‐functionalized poly(methyl methacrylate) (PMMA‐N₃) and alkyne) are carried out in the presence of 2‐(hydroxymethyl)‐2‐methyl‐3‐oxo‐3‐(2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxy) propyl pent‐4‐ynoate, 2 , as an initiator for 48 h at 125 °C (one‐pot/one‐step). As a second technique, NMP of St and ROP of ε‐CL were conducted using 2 as an initiator for 20 h at 125 °C, and subsequently PEG‐N₃ or azide end‐functionalized poly(tert‐butyl acrylate (PtBA‐N₃) was added to the polymerization mixture, followed by a click reaction [3 + 2] for 24 h at room temperature (one‐pot/two‐step). The 3‐miktoarm star terpolymers, PEG‐poly(ε‐caprolactone)(PCL)‐PS, PtBA‐PCL‐PS and PMMA‐PCL‐PS, were recovered by a simple precipitation in methanol without further purification. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3588–3598, 2007     

Room‐temperature RAFT copolymerization of 2‐chloroallyl azide with methyl acrylate and versatile applications of the azide copolymers

A new vinyl azide monomer, 2‐chlorallyl azide (CAA), has been synthesized from commercially available reagent in one step. The reversible addition fragmentation chain transfer (RAFT) copolymerization of CAA with methyl acrylate (MA) was carried out at room temperature using a redox initiator, benzoyl peroxide (BPO)/N,N‐dimethylaniline (DMA), in the presence of benzyl 1H‐imidazole‐1‐carbodithioate (BICDT). The polymerization results showed that the process bears the characteristics of controlled/living radical polymerizations, such as the molecular weight increasing linearly with the monomer conversion, the molecular weight distribution being narrow, and a linear relationship existing between ln([M]₀/[M]) and the polymerization time. Chain extension polymerization was performed successfully to prepare block copolymer. Furthermore, the azide copolymers were functionalized by Cu^I‐catalyzed “click” reaction with alkyne‐containing poly(ethylene glycol) (PEG) to yield graft copolymers with hydrophilic PEG side chains. Surface modification of the glass sheet was successfully achieved via the crosslinking reaction of the azide copolymer under UV irradiation at ambient temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1348–1356, 2010     

H‐shaped (ABCDE type) quintopolymer via click reaction [3 + 2] strategy

H‐shaped quintopolymer containing different five blocks: poly(ε‐caprolactone) (PCL), polystyrene (PS), poly(ethylene glycol) (PEG), and poly(methyl methacrylate) (PMMA) as side chains and poly(tert‐butyl acrylate) (PtBA) as a main chain was simply prepared from a click reaction between azide end‐functionalized PCL‐PS‐PtBA 3‐miktoarm star terpolymer and PEG–PMMA‐block copolymer with alkyne at the junction point, using Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as a catalyst in DMF at room temperature for 20 h. The H‐shaped quintopolymer was obtained with a number–average molecular weight (M_n) around 32,000 and low polydispersity index (M_w/M_n) 1.20 as determined by GPC analysis in THF using PS standards. The click reaction efficiency was calculated to have 60% from ¹H NMR spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4459–4468, 2008     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.     

Reducibly degradable hydrogels of PNIPAM and PDMAEMA: Synthesis,stimulus‐response and drug release

Reducibly degradable hydrogels of poly(N‐isopropylacrylamide) (PNIPAM) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by the combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne‐pending copolymer of PNIPAM or PDMAEMA was obtained through RAFT copolymerization of propargyl acrylate with NIPAM or DMAEMA. Bis‐2‐azidyl‐isobutyrylamide of cystamine (AIBCy) was used as the crosslinking reagent to prepare reducibly degradable hydrogels by click chemistry. The hydrogels exhibited temperature or pH stimulus‐responsive behavior in water, with rapid response, high swelling ratio, and reproducible swelling/shrinkage cycles. The loading and release of ceftriaxone sodium proved the feasibility of the hydrogels as the stimulus‐responsive drug delivery system. Furthermore, the presence of disulfide linkage in AIBCy favored the degradation of hydrogels in the reductive environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3604–3612, 2010     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

Preparation and characterization of macroporous poly(N‐isopropylacrylamide) hydrogels for the controlled release of proteins

Macroporous, temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels were synthesized with poly(ethylene glycol)s (PEGs; molecular weight = 2000–6000) as the pore‐forming agents. The influence of the molecular weight and PEG content on the responsive kinetics of these macroporous hydrogels was investigated. The PEG‐modified PNIPAAm hydrogels were characterized by the swelling ratio, deswelling–reswelling kinetics, Fourier transform infrared, and differential scanning calorimetry. The morphology of these hydrogels was analyzed with scanning electron microscopy. The prepared macroporous hydrogels exhibited some unique properties in comparison with the gels with low molecular weight PEGs (molecular weight < 2000) as the pore‐forming agents. In addition, a preliminary study on the controlled release of bovine serum albumin from these macroporous hydrogels was carried out. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 152–159, 2003     

Linear tetrablock quaterpolymers via triple click reactions,azide‐alkyne,diels–alder,and nitroxide radical coupling in a one‐pot fashion

Azide‐alkyne and Diels–Alder click reactions together with a click‐like nitroxide radical coupling reaction were used in a one‐pot fashion to generate tetrablock quaterpolymer. The various living polymerization generated linear polymers with orthogonal end‐functionalities, maleimide‐terminated poly(ethylene glycol) (PEG‐MI), anthracene‐ and azide‐terminated polystyrene, alkyne‐ and bromide‐terminated poly(tert‐butyl acrylate) or alkyne‐poly(n‐butyl acrylate), and tetramethylpiperidine‐1‐oxyl (TEMPO)‐terminated poly(ε‐caprolactone) (PCL‐TEMPO) were clicked together in a one‐pot fashion to generate PEG‐b‐PS‐b‐PtBA‐b‐PCL or PEG‐b‐PS‐b‐PnBA‐b‐PCL quaterpolymer using Cu(0), CuBr, and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst in dimethyl formamide at 80 °C for 36 h. Linear precursors and target quaterpolymers were analyzed via ¹H NMR and gel permeation chromatography. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of ABCD 4‐miktoarm star polymers by combination of RAFT,ROP, and “Click Chemistry”

The ABCD 4‐miktoarm star polymers based on polystyrene (PS), poly(ε‐caprolactone) (PCL), poly(methyl acrylate) (PMA), and poly(ethylene oxide) (PEO) were synthesized and characterized successfully. Using the mechanism transformation strategy, PS with three different functional groups (i.e., hydroxyl, alkyne, and trithiocarbonate), PS‐HEPPA‐SC(S)SC₁₂H₂₅, was synthesized by the reaction of the trithiocarbonate‐terminated PS with 2‐hydroxyethyl‐3‐(4‐(prop‐2‐ynyloxy)phenyl) acrylate (HEPPA) in tetrahydrofuran (THF) solution. Subsequently, the ring‐opening polymerization (ROP) of ε‐caprolactone (CL) was carried out in the presence of stannous(II) 2‐ethylhexanoate and PS‐HEPPA‐SC(S)SC₁₂H₂₅, and then the PS‐HEPPA(PCL)‐SC(S)SC₁₂H₂₅ obtained was used in reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl acrylate (MA) to produce the ABC 3‐miktoarm star polymer, S(PS)(PCL)(PMA) carrying an alkyne group. The ABCD 4‐miktoarm star polymer, S(PS)(PCL)(PMA)(PEO) was successfully prepared by click reaction of the alkyne group on the HEPPA unit with azide‐terminated PEO (PEO‐N₃). The target polymer and intermediates were characterized by NMR, FTIR, GPC, and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6641–6653, 2008     

Polymersome‐forming amphiphilic glycosylated polymers: Synthesis and characterization

Copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) was used to prepare glycosylated polyethylene (PE)–poly(ethylene glycol) (PEG) amphiphilic block copolymers. The synthetic approach involves preparation of alkyne‐terminated PE‐b‐PEG followed by CuAAC reaction with different azide functionalized sugars. The alkyne‐terminated PE‐b‐PEG was prepared by etherification reaction between hydroxyl‐terminated PE‐b‐PEG (M_n ～ 875 g mol^?1) and propargyl bromide and azidoethyl glycosides were prepared by glycosylation of 2‐azidoethanol. Atmospheric pressure solids analysis probe‐mass spectrometry was used as a novel solid state characterization tool to determine the outcome of the CuAAC click reaction and end‐capping of PE‐b‐PEG by the azidoethyl glycoside group. The aqueous solution self‐assembly behavior of these amphiphilic glycosylated polymers was explored by TEM and dye solubilization studies. Carbohydrate‐bearing spherical aggregates with the ability to solubilize a hydrophobic dye were observed. The potential of these amphiphilic glycosylated polymers to self‐assemble via electro‐formation into giant carbohydrate‐bearing polymersomes was also investigated using confocal fluorescence microscopy. An initial bioactivity study of the carbohydrate‐bearing aggregates is furthermore presented. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5184–5193     

Modular Synthesis of Thermosensitive P(NIPAAm‐co‐HEMA)/β‐CD Based Hydrogels via Click Chemistry

Two kinds of representative polymers, poly(N‐isopropylacrylamide) (PNIPAAm) and β‐cyclodextrin (β‐CD) were selected and modified with azide and alkyne fucntional groups, respectively. When the solutions of these two modified polymers were mixed together, a cross‐linking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, occurred in the presence of Cu(I) catalyst. The strategy described here provides several advantages for the hydrogel formation including mild reaction conditions and controllable gelation rate. The resulted hydrogels were studied in terms of scanning electric microscopy (SEM), equilibrium swelling ratio and swelling/shrinking kinetics. The data obtained demonstrated the hydrogels had a porous structure as well as favorable thermosensitivity.

     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

ABCD 4‐miktoarm star quarterpolymers using click [3 + 2] reaction strategy

Two samples of ABCD 4‐miktoarm star quarterpolymer with A = polystyrene (PS), B = poly(ε‐caprolactone) (PCL), C = poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA), and D = poly(ethylene glycol) (PEG) were prepared using click reaction strategy (Cu(I)‐catalyzed Huisgen [3 + 2] reaction). Thus, first, predefined block copolymers of different polymerization routes, PS‐b‐PCL with azide and PMMA‐b‐PEG and PtBA‐b‐PEG copolymers with alkyne functionality, were synthesized and then these blocks were combined together in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst in DMF at room temperature to give the target 4‐miktoarm star quarterpolymers. The obtained miktoarm star quarter polymers were characterized by GPC, NMR, and DSC measurements. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1218–1228, 2008     

Multiarm star triblock terpolymers via sequential double click reactions

Multiarm star triblock terpolymers were obtained by using two different click reactions sequentially: Cu(I) catalyzed azide–alkyne and Diels–Alder. The synthetic strategy is described as follows: (poly(methyl methacrylate))_n‐(polystyrene)_m‐poly(divinyl benzene)) ((PMMA)_n‐(PS)_m‐polyDVB) multiarm star diblock copolymer was first obtained from an azide–alkyne click reaction of (alkyne‐PS)_m‐polyDVB multiarm star polymer with α‐anthracene‐ω‐azide PMMA (anth‐PMMA‐N₃), followed by a Diels–Alder click reaction of the anthracene groups at the star periphery with α‐maleimide poly (tert‐butyl acrylate) (PtBA‐MI) or α‐maleimide poly(ethylene glycol) (PEG‐MI) leading to target (PtBA)_k‐(PMMA)_n‐(PS)_m‐polyDVB and (PEG)_p‐(PMMA)_n‐(PS)_m‐polyDVB multiarm star triblock terpolymers. The hydrodynamic diameter of individual multiarm star triblock terpolymers were measured by dynamic light scattering (DLS) to be ～24–27 nm in consistent with the atomic force microscopy (AFM) images on silicon substrates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1557–1564, 2010     

Macrocyclization of polymers via ring‐closing metathesis and azide/alkyne‐“click”‐reactions: An approach to cyclic polyisobutylenes

The end‐to‐end cyclization of telechelic polyisobutylenes (PIB's) toward cyclic polyisobutylenes is reported, using either ring‐closing metathesis (RCM) or the azide/alkyne‐“click”‐reaction. The first approach uses bisallyl‐telchelic PIB's (M_n = 1650, 3680, 9770 g mol^?1) and Grubbs 1st‐, 2nd‐, and 3rd‐generation catalyst leading to cyclic PIB's in 60–80% yield, with narrow polydispersities (M_w/M_n = 1.25). Azide/alkyne‐“click”‐reactions of bisalkyne‐telechelic PIB's (M_n = 3840 and 9820 g mol^?1) with excess of 1,11‐diazido‐undecane leads to the formation of mixtures of linear/cyclic PIB's under formation of oligomeric cycles. Subsequent reaction of the residual azide‐moieties in the linear PIB's with excess of alkyne‐telechelic PEO enables the chromatographic removal of the resulting linear PEO‐PIB‐block copolymers by column chromatography. Thus pure cyclic PIB's can be obtained using this double‐“click”‐method, devoid of linear contaminants. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 671–680, 2010