Synthesis of Some Heterocyclic Compounds from 1H‐Indole‐2,3‐Dione: A Direct One‐Pot Synthesis of Spiro Indolone Derivatives

Some spiro indolone derivatives 5_a,b and 6 were synthesized through one‐pot synthesis via the ternary condensation of 1H‐indole‐2,3‐dione 1 , 3‐methyl‐1‐phenyl‐2‐pyrazolin‐5‐one 2 and active methylenes, namely malononitrile, ethyl cyanoacetate 4_a,b and pyrazolone 2 , respectively. The same derivatives can be obtained via other methods, through reactions of 3‐[3‐methyl‐5‐oxo‐1‐phenyl‐1,5‐dihydro‐pyrazol‐(4Z)‐ylidene]‐1,3‐dihydro‐indol‐2‐one 3 with the corresponding active methylenes. Reaction of 3 with amines and with ethyl vinyl ether was studied.     

Synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones using nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl2 nanoparticles

Nano‐Zn‐[2‐boromophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ (nano‐[Zn‐2BSMP]Cl₂) as a nanoparticle Schiff base complex and a catalyst was introduced for the solvent‐free synthesis of 4‐((2‐hydroxynaphthalen‐1‐yl)(aryl)methyl)‐5‐methyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐ones by the multicomponent condensation reaction of various aromatic aldehydes, β‐naphthol, ethyl acetoacetate, and phenyl hydrazine at room temperature.     

Synthesis and Reactions of 3‐Methylthiazolo[3,2‐a]Benzimidazole‐2‐Carboxylic Acid Hydrazide: Synthesis of Some New Pyrazole, 1,3‐Thiazoline, 1,2,4‐Triazole and 1,2,4‐Triazolo[3,4‐b]‐1,3,4‐Thiadiazine Derivatives Pendant to Thiazolo[3,2‐a]Benzimidazole Moiety

The reaction of 3‐methylthiazolo[3,2‐a]benzimidazole‐2‐carboxylic acid ethyl ester (1) with hydrazine hydrate gives the hydrazide 2 which reacts with CS₂/KOH to afford the potassium salt 3. Treatment of 3 with l‐aryl‐2‐bromoethanones 4a,b afforded the 1,3‐thiazoline derivatives 6a,b, respectively, while the reaction of 3 with hydrazine hydrate afforded 1,2,4‐triazole‐3‐thione derivative 9. The reaction of 9 with l‐aryl‐2‐bromoethanones 4a,b and with hydrazonyl chlorides 11a,b gave the 1,2,4‐triazolo[3,4‐b]‐1,3,4‐thiadiazine derivatives 10a,b and 12a,b, respectively. Treatment of hydrazide 2 with phenyl isothiocyanate in refluxing benzene gave the thiosemicarbazide derivative 16. The latter reaction gave 1,3,4‐oxadiazole derivative 17 when benzene was replaced by DMF. Cyclization of the thiosemicarbazide derivative 16 with NaOH resulted in the formation of the 1,2,4‐triazole‐3‐thione derivative 18.     

Reaction of 6‐Methyl‐2‐Thiouracil and 6‐Phenyl‐2‐Thiouracil with Chloro‐β‐Dicarbonyl and Bromo‐β‐Dicarbonyl Compounds and Their Nitrile Analogs

Derivatives of 2‐methylidene‐1,3‐dihydropyrimidin‐4‐ones 2a , 2b , 2c , 2d , 2e , 2f , 2g were synthesized by interaction of 6‐methyl‐2‐thiouracil and 6‐phenyl‐2‐thiouracil 1a , 1b with some activated halogenides: diethyl bromomalonate, ethyl 2‐chloro‐3‐oxobutanoate, ethyl 2‐bromocyanoacetate, 2‐bromo‐5,5‐dimethylcyclohexan‐1,3‐dione, and bromomalononitrile. The boiling of 1a with ethyl 2‐bromocyanoacetate in mixture of ethanol and EtONa results in intramolecular cyclization and formation of thiazolo[3,2‐a]pyrimidin‐5‐one 3 . Interaction of 1a with 3‐chloropentane‐2,4‐dione and 2‐bromo‐1,3‐diphenylpropane‐1,3‐dione yielded corresponding S‐substituted thiopyrimidines 4a , 4b . In general, the products of 1b S‐alkylation are less prone to sulfur extrusion. Reaction of 1b with diethyl bromomalonate in the absence of EtONa stops at the S‐alkylation step, while in the presence of EtONa in ethanol or PPh₃ in dioxane 2‐(ethoxycarbonylmethyl)thio‐6‐phenyl‐1,3‐dihydropyrimidin‐4(1H)‐one 6 is formed exclusively. Molecular structure and crystal structure of 2‐(1,1‐diethoxycarbonylmethyliden)‐6‐methyl‐1,3‐dihydropyrimidin‐4(1H)‐one 2a are discussed.     

One‐pot three‐component synthesis of novel 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid derivatives

A simple and easy synthesis of 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carboxylic acid ( 3 ) has been successfully developed through a one‐pot three‐component condensation reaction of (2‐amino‐phenyl)‐oxo‐acetic acid sodium salt ( 1 ) obtained from the hydrolysis of isatin with ammonium acetate and 3‐nitrobenzaldehyde. Some novel quinazoline‐ester derivatives 4‐7 were then obtained by the reaction between the new compound 3 and various alcohols. Then, quinazoline‐amide derivatives 10‐14 were synthesized from the reaction of various amines and 2‐(3‐nitro‐phenyl)‐quinazoline‐4‐carbonyl chloride ( 8 ), obtained by the reaction of compound 3 with SOCl₂. Finally, some novel quinazoline‐azo derivatives 17‐19 were synthesized by the coupling reaction between β‐dicarbonyl compounds and the novel amino‐quinazoline derivative compound 15 , obtained by reduction of nitro‐quinazoline derivative compound 11 . Thus, a new series of quinazoline‐4‐carboxylic acid, ester, amide, and azo derivatives was synthesized and fully characterized by ¹H NMR, ¹³C NMR, IR, and mass spectrometry analysis.     

5‐Acetyl‐2‐amino‐6‐methyl‐4‐(3‐nitrophenyl)‐4H‐pyran‐3‐carbonitrile and 2‐amino‐5‐ethoxycarbonyl‐6‐methyl‐4‐(3‐nitrophenyl)‐4H‐pyrano‐3‐carbonitrile

The structures of the title compounds, C₁₅H₁₃N₃O₄, (I), and C₁₆H₁₅N₃O₅ [IUPAC name: ethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(3‐nitro­phenyl)‐4H‐pyrano‐3‐carboxyl­ate], (II), are very similar, with the heterocyclic rings adopting boat conformations. The pseudo‐axial m‐nitro­phenyl substituents are rotated by 84.0 (1) and 98.7 (1)° in (I) and (II), respectively, with respect to the four coplanar atoms of the boat. The dihedral angles between the phenyl rings and nitro groups are 12.1 (2) and 8.4 (2)° in (I) and (II), respectively. The two compounds have similar patterns of intermolecular N—H?O and N—H?N hydrogen bonding, which link mol­ecules into infinite tapes along b .     

Preparation of 1‐substituted‐5‐[(2‐oxo‐2‐phenyl)ethyl]imidazoles

New high yield preparation methods were developed for the pharmaceutically interesting compounds, 1‐benzyl‐, 1‐methyl‐, and 1H‐5‐[(2‐oxo‐2‐phenyl)ethyl]imidazoles 1a‐c , respectively. The title compounds were synthesized by four different methods using various starting materials. Two of the methods involved transformation reactions of the key intermediates, 1‐substituted‐5‐[(2‐nitro‐2‐phenyl)ethenyl]imidazoles 2a‐c and 1‐substituted‐5‐[(2‐nitro‐2‐phenyl)ethyl]imidazoles 3a‐c , while the other two utilized the oxidation of 1‐substituted‐5‐[(2‐hydroxy‐2‐phenyl)ethyl]imidazoles 4a‐c , with chromic oxide, and the umpolung reaction of benzaldehyde followed by a condensation reaction of the umpolung intermediate with imidazolecarboxaldehydes 6a‐c.     

5′‐Allyl‐2′‐benzoyloxy‐3′‐methoxy‐4‐nitroazobenzene

The structure of the title compound, 4‐allyl‐2‐methoxy‐6‐[(4‐nitrophenyl)diazenyl]phenyl benzoate, C₂₃H₁₉N₃O₅, displays the characteristic features of azobenzene derivatives. The azobenzene moiety of the molecule has a trans configuration and in this moiety, average C—N and N=N bond lengths are 1.441 (3) and 1.241 (3) Å, respectively.     

New Synthesis and Reactions of Ethyl 5‐amino‐4‐cyano‐1‐phenyl‐1H‐pyrazole‐3‐carboxylate

Synthesis of ethyl 5‐amino‐4‐cyano‐1‐phenyl‐1H‐pyrazole‐3‐carboxylate 5 has been achieved via abnormal Beckmann rearrangement of o‐chloroaldehyde 1 . Reaction of o‐aminocarbonitrile 5 with concentrated H₂SO₄ furnished expected o‐aminocarboxamide pyrazole 6 . Key intermediates o‐aminocarbonitrile 5 and o‐aminocarboxamide 6 were successfully utilized for the synthesis of pyrazolopyrimidine derivatives. The replacement of Cl in o‐chlorocarbonitrile 3 with secondary amine furnished new synthon 13 , which was further used for the synthesis of polysubstituted heterocycles. The obtained new products were well characterized by IR, ¹H and ¹³C NMR, and mass spectra.     

1‐[4‐(Methyl­sulfonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole derivatives

Three related compounds containing a pyrazole moiety with vicinal phenyl rings featuring a methyl­sulfonyl substituent are described, namely 3‐methyl‐1‐[4‐(methyl­sulfonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole, C₁₇H₁₆N₂O₂S, ethyl 1‐[4‐(methyl­sul­fonyl)­phenyl]‐5‐phenyl‐1H‐pyrazole‐3‐carboxyl­ate, C₁₉H₁₈N₂O₄S, and 1‐[4‐(methyl­sulfonyl)­phenyl]‐3‐[3‐(morpholino)­phenoxy­methyl]‐5‐phenyl‐1H‐pyrazole, C₂₇H₂₇N₃O₄S. The design of these compounds was based on celecoxib, a selective cyclo­oxy­genase‐2 (COX‐2) inhibitor, in order to study the influence of various substituents on COX‐2 and 5‐lipoxy­genase (5‐LOX) inhibition.     

Chemoselectivity in the Reaction of 2‐Diazo‐3‐oxo‐3‐phenylpropanal with Aldehydes and Ketones

The chemoselectivity in the reaction of 2‐diazo‐3‐oxo‐3‐phenylpropanal ( 1 ) with aldehydes and ketones in the presence of Et₃N was investigated. The results indicate that 1 reacts with aromatic aldehydes with weak electron‐donating substituents and cyclic ketones under formation of 6‐phenyl‐4H‐1,3‐dioxin‐4‐one derivatives. However, it reacts with aromatic aldehydes with electron‐withdrawing substituents to yield 1,3‐diaryl‐3‐hydroxypropan‐1‐ones, accompanied by chalcone derivatives in some cases. It did not react with linear ketones, aliphatic aldehydes, and aromatic aldehydes with strong electron‐donating substituents. A mechanism for the formation of 1,3‐diaryl‐3‐hydroxypropan‐1‐ones and chalcone derivatives is proposed. We also tried to react 1 with other unsaturated compounds, including various olefins and nitriles, and cumulated unsaturated compounds, such as N,N′‐dialkylcarbodiimines, phenyl isocyanate, isothiocyanate, and CS₂. Only with N,N′‐dialkylcarbodiimines, the expected cycloaddition took place.     

Mn‐[4‐Chlorophenyl‐Salicylaldimine‐Methylpyranopyrazole]Cl2 as a Novel Nanostructured Schiff Base Complex and Catalyst

Mn‐[4‐chlorophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ ([Mn‐4CSMP ]Cl₂) as nano‐Schiff base complex was prepared and fully characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, derivative thermogravimetry, scanning electron microscopy, energy‐dispersive X‐ray analysis, and UV–vis spectroscopy. The reactivity of nano‐[Mn‐4CSMP ]Cl₂ as a catalyst was tested on the tandem cyclocondensation–Knoevenagel condensation–Michael reaction between phenylhydrazine and ethyl acetoacetate with various aromatic aldehydes to give 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H ‐pyrazol‐5‐ol)s derivatives.     

Studies on [PtCl2]‐ or [AuCl]‐Catalyzed Cyclization of 1‐(Indol‐2‐yl)‐2,3‐Allenols: The Effects of Water/Steric Hindrance and 1,2‐Migration Selectivity

The [PtCl₂]‐ or [AuCl]‐catalyzed reaction of 1‐(indol‐2‐yl)‐2,3‐allenols occurred smoothly at room temperature to afford a series of poly‐substituted carbazoles efficiently. Compared with the [PtCl₂]‐catalyzed process, the [AuCl]‐catalyzed reaction represents a significant advance in terms of the scope and the selectivity. Selective 1,2‐alkyl or aryl migration of the gold carbene intermediate was observed: compared with the methyl group, the isopropyl, cyclopropyl, cyclobutyl, and cyclohexyl groups migrate exclusively; the cyclopropyl group shifts selectively over the ethyl group; the 1,2‐migration of a non‐methyl linear alkyl is faster than methyl group; the phenyl group migrates exclusively over methyl or ethyl group. DFT calculations show that water makes the elimination of H₂O facile requiring a much lower energy and validates the migratory preferences of different alkyl or phenyl groups observed.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Synthesis and characterization of new complexes of the type [Ru(CO)2Cl2 (2‐phenyl‐1,8‐naphthyridine‐kN) (2‐phenyl‐1,8‐naphthyridine‐kN′)]. Preliminary applications in homogeneous catalysis

Novel ruthenium (II) complexes were prepared containing 2‐phenyl‐1,8‐naphthyridine derivatives. The coordination modes of these ligands were modified by addition of coordinating solvents such as water into the ethanolic reaction media. Under these conditions 1,8‐naphthyridine (napy) moieties act as monodentade ligands forming unusual [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] complexes. The reaction was reproducible when different 2‐phenyl‐1,8‐naphthyridine derivatives were used. On the other hand, when dry ethanol was used as the solvent we obtained complexes with napy moieties acting as a chelating ligand. The structures proposed for these complexes were supported by NMR spectra, and the presence of two ligands in the [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] type complexes was confirmed using elemental analysis. All complexes were tested as catalysts in the hydroformylation of styrene showing moderate activity in N,N′‐dimethylformamide. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of 4-(4-Methylsulfonylphenyl)-3-phenyl-2(3H)-thiazole Thione Derivatives as New Potential COX-2 Inhibitors

Synthesis of novel 4-（4-methylsulfonylphenyl）-3-phenyl-2（3H）-thiazole thione derivatives with functionalized diarylheterocycle pharmacophore as potential COX-2 inhibitors was described. The title compounds were synthesized by cyclocondensation of corresponding dithiocarbamate and 2-bromo-1-（4-methylsulfonylphenyl）ethanone, followed by dehydration with H2SO4. All of the target compounds were characterized by ^1H NMR, IR and mass spectral data.     

An Efficient One‐Pot,Four‐Component Synthesis of {[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione Derivatives

The 1‐{[(1H‐1,2,3‐Triazol‐4‐yl)methoxy]phenyl}‐1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives 5 were synthesized by a simple and efficient method, i.e., by the four‐component, one‐pot condensation reaction of phthalohydrazide 4 , a (propargyloxy)benzaldehyde 1 , an active methylene compound 3 (malononitrile or ethyl cyanoacetate), and an azide 2 in the presence of Cu(OAc)₂/sodium L ‐ascorbate as catalyst and 1‐methyl‐1H‐imidazolium trifluoroacetate ([Hmim](CF₃COO)) as an ionic‐liquid medium in good to excellent yields (Scheme 1).     

Synthesis of Novel Fused Heterocycles Based on 6‐Amino‐4‐phenyl‐2‐thioxo‐1,2‐dihydropyridine‐3,5‐dicarbonitrile

Under phase transfer catalysis conditions, 6‐amino‐4‐phenyl‐2‐thioxo‐1,2‐dihydropyridine‐3,5‐dicarbonitrile ( 1 ) was allowed to react with halo compounds, acrylonitrile, chloroacetyl chloride, ethyl cyanoacetate, formamide, triethylorthoformate, or formic acid to give new derivatives of fused pyridines 2–22, respectively. Acetylation of compound 1 using acetic anhydride afforded product 23 , which in turn underwent intramolecular cyclization in pyridine to give the corresponding pyrido[2,3‐d]pyrimidine 24 .     

Synthesis and some reactions of 4‐(ethoxycarbonyl)‐1,5‐diphenyl‐1H‐pyrazole‐3‐carboxylic acid

1,5‐Diphenyl‐1H‐pyrazole‐3,4‐dicarboxylic acid‐4‐ethyl ester 2 , obtained from the 4‐ethoxycarbonyl‐5‐phenyl‐2,3‐furandione 1 and N‐benzylidene‐N′‐phenyl hydrazine, was converted via reactions of its acid chloride 3 with various alcohols or N‐nucleophiles into the corresponding ester 5 or amide derivatives 6 , respectively. In addition, 2 was decarboxylated to give ethyl 1,5‐diphenylpyrazole‐4‐carboxylate 4 . Nitrile 7 derivative of 2 was also obtained by dehydration of 6a in a mixture of SOCl₂ and DMF. While cyclocondensation reaction of 2 with hydrazine hydrate leads to the formation of pyrazolo[3,4‐d]pyridazine‐4,7‐dione 8 , the reaction of 3 with anhydrous hydrazine provided a new bis pyrazole derivative 9 .     

1‐Methyl‐1‐phenyl‐3‐[1‐hydroxy­imino‐2‐(succinimido)­ethyl]­cyclo­butane

In the title compound, C₁₇H₂₀N₂O₃, the cyclo­butane ring is puckered, with a dihedral angle of 19.11 (15)°. The 1‐phenyl and 3‐[1‐hydroxy­imino‐2‐(succinimido)­ethyl] groups are in cis positions. The mol­ecules are linked by O—H⋯O and C—H⋯π(benzene) interactions, forming a two‐dimensional network.