Antimicrobial polymers containing melamine derivatives. II. Biocidal polymers derived from 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine

Poly(2‐vinyl‐4,6‐diamino‐1,3,5‐triazine) (PVDAT) and a series of poly(styrene‐co‐2‐vinyl‐4,6‐diamino‐1,3,5‐triazine) (PS‐co‐VDAT) copolymers were synthesized via conventional free‐radical polymerizations. The polymer structures were confirmed by Fourier transform infrared, NMR, and elemental analysis. The molecular weights were determined by gel permeation chromatography studies, and the thermal properties were characterized by differential scanning calorimetry and thermogravimetric analysis. After treatment with chlorine bleach, PVDAT and PS‐co‐VDAT provided potent antimicrobial functions against multidrug‐resistant Gram‐negative and Gram‐positive bacteria. The antimicrobial functions were durable for longer than 3 months and rechargeable for more than 50 times. The structure–property relationship of the polymers was further discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4089–4098, 2005     

Designing superhydrophobic surface based on fluoropolymer–silica nanocomposite via RAFT‐mediated polymerization‐induced self‐assembly

Superhydrophobic surfaces (SHS) find versatile applications as coatings due to their very high water‐repellency, self‐cleaning, and anti‐icing properties. This investigation describes the preparation of a SHS from surfactant‐free hybrid fluoropolymer latex. In this case, reversible addition‐fragmentation chain transfer (RAFT) polymerization was adopted to prepare a copolymer of 4‐vinyl pyridine (4VP) and vinyl triethoxysilane (VTES), where the pyridine units were quaternized to make the copolymer soluble in water. The copolymer was further used as a macro‐RAFT agent to polymerize 2,2,2‐trifluoroethyl methacrylate (TFEMA) in a surfactant‐free emulsion via polymerization‐induced self‐assembly (PISA). The macro‐RAFT agent contained a small amount of VTES as co‐monomer which was utilized to graft silica nanoparticles (SNPs) onto the P(TFEMA) spheres. The film prepared using the nanocomposite latex exhibited a nano‐structured surface as observed by SEM and AFM analyses. Surface modification of the film with fluorinated trichlorosilane produced an SHS with a water contact angle (WCA) of 151.5°. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 266–275     

Antimicrobial agents as photostabilizers for rigid poly(vinyl chloride)

Some amide derivatives of ethylene glycol‐bis(2‐aminoethylether)‐N,N,N^′,N^′‐tetraacetic acid (EGTA) have been prepared via their coupling with different aniline derivatives: amino, methyl, chloro, and hydroxy aniline. The EGTA amide derivatives were characterized, and their antimicrobial activities were evaluated. These antimicrobial agents have been investigated as photostabilizers for rigid poly(vinyl chloride) (PVC), suspension PVC, with a K value of 70. Their stabilizing efficiencies were evaluated by determining the percentage of weight loss, the intrinsic viscosities, as well as the amount of formed gel of the photodegraded PVC. The extent of discoloration and the change in the mechanical properties of the photodegraded polymer were also evaluated. The applied materials reduced the loss in weight that resulted from HCl evolution during photodegradation. Both viscosity and gel content measurements showed also a decrease in their values during the degradation process. The decrease in the percentage of gel formation upon applying the investigated photostabilizers reflects the lowering in extent of cross‐linking of the polymer, which implies preserving the mechanical properties of PVC. The extent of discoloration was also improved in the presence of the investigated compounds. The results have proved a greater stabilizing efficiencies of the antimicrobial EGTA amide derivatives than that of the phenyl salicylate ultraviolet (UV) absorber, which is commonly used as an industrial stabilizer. A radical mechanism was proposed to account for the stabilizing action of the investigated products. Copyright © 2011 John Wiley & Sons, Ltd.     

Styrene 4‐vinylbenzocyclobutene copolymer for microelectronic applications

Styrene and 4‐vinylbenzocyclobutene (vinyl‐BCB) random copolymers were prepared by free radical polymerization and studied for suitability as a dielectric material for microelectronic applications. The percentage of vinyl‐BCB in the copolymer was varied from 0 to 26 mol % to optimize the physical and mechanical properties of the cured copolymer as well as the cost. Copolymer in which 22 mol % of vinyl‐BCB was incorporated along with styrene produced a thermoset polymer which, after cure, did not show a T_g before decomposition at about 350 °C. The polymeric material has a very low dielectric constant, dissipation factor, and water uptake. The fracture toughness of the copolymer was improved with the addition of 20 wt % of a star‐shaped polystyrene‐block‐polybutadiene. Blends of the poly(styrene‐co‐vinyl‐BCB) with the thermoplastic elastomer provided material that maintained high T_g of the cured copolymer with only a slight decrease in thermal stability. The crosslinked styrenic polymer and toughened blends possess many properties that are desirable for high frequency‐high speed mobile communication applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2799–2806, 2008     

“Click polyester”: Synthesis of polyesters containing triazole units in the main chain via safe and rapid “click” chemistry and their properties

Click Cu(I)‐catalyzed polymerizations of diynes that contained ester linkages and diazides were performed to produce polyesters (click polyesters) of large molecular weights [(～1.0–7.0 ) × 10⁴], that contained main‐chain 1,4‐disubstitued triazoles in excellent yields. Incorporation of triazole improved the thermal properties and magnified the even‐odd effect of the methylene chain length. We also found that, by changing the positions of the triazole rings, the thermal properties of the polyesters could be controlled. The use of in situ azidation was a safe reaction, as explosive diazides are not used. In addition, the microwave heating was found to accelerate the polymerization rates. This is the first study that has applied click chemistry for the synthesis of a series of polyesters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4207–4218, 2010     

Development of novel cardo‐containing phenylethynyl‐terminated polyimide with high thermal properties

A phenylethynyl‐terminated reactive diluent [Card‐4‐phenylethynylphthalic anhydride (PEPA)], which contained fluorenyl cardo structures, was successfully synthesized and used as a modifier for flexible phenylethynyl‐terminated imide oligomer (PEI‐PEPA). The chemical structure, crosslink characterization, molecular weights, and thermal properties of the products were characterized. The imide systems with addition of 10, 20, 30, and 40 wt% Card‐PEPA to PEI‐PEPA (PEI‐PEPA‐Card) and their cured resin systems were prepared. The thermal curing behaviors of imide systems at different heating rates were analyzed by using differential scanning calorimetry. Thermal properties such as glass transition temperature (T_g) and char yield at 800°C of the resultant resin systems were studied by differential scanning calorimetry, dynamic mechanical analysis, and thermogravimetric analysis. The rheological properties were also investigated using a dynamic rheometry. These properties were found to be outstanding compared with pure PEI‐PEPA. The uncured imide systems exhibited lower T_g and lower isothermal viscosity with addition of Card‐PEPA. Furthermore, the T_g and char yield of the cured resin systems increased with addition of Card‐PEPA. The cured resin systems containing 40 wt% Card‐PEPA exhibited the highest T_g of 359°C and char yield at 800°C of 66.5%. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(N‐vinyl pyrrolidone)‐block‐Poly(N‐vinyl carbazole)‐block‐poly(N‐vinyl pyrrolidone) triblock copolymers: Synthesis via RAFT/MADIX process,self‐assembly behavior,and photophysical properties

Poly(N‐vinyl pyrrolidone)‐block‐poly(N‐vinyl carbazole)‐block‐poly(N‐vinyl pyrrolidone) (PVP‐b‐PVK‐b‐PVP) triblock copolymers were synthesized via sequential reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process. First, 1,4‐phenylenebis(methylene)bis(ethyl xanthate) was used as a chain transfer agent to mediate the radical polymerization of N‐vinyl carbazole (NVK). It was found that the polymerization was in a controlled and living manner. Second, one of α,ω‐dixanthate‐terminated PVKs was used as the macromolecular chain transfer agent to mediate the radical polymerization of N‐vinyl pyrrolidone (NVP) to obtain the triblock copolymers with various lengths of PVP blocks. Transmission electron microscopy (TEM) showed that the triblock copolymers in bulks were microphase‐separated and that PVK blocks were self‐organized into cylindrical microdomains, depending on the lengths of PVP blocks. In aqueous solutions, all these triblock copolymers can self‐assemble into the spherical micelles. The critical micelle concentrations of the triblock copolymers were determined without external adding fluorescence probe. By analyzing the change in fluorescence intensity as functions of the concentration, it was judged that the onset of micellization occurred at the concentration while the FL intensity began negatively to deviate from the initial linear increase with the concentration. Fluorescence spectroscopy indicates that the self‐assembled nanoobjects of the PVP‐b‐PVK‐b‐PVP triblock copolymers in water were capable of emitting blue/or purple fluorescence under the irradiation of ultraviolet light. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1852–1863     

ZnO/PBAT nanocomposite films: Investigation on the mechanical and biological activity for food packaging

Packaging of foods in high barrier materials is essential to attain food safety. Nanocomposite technology is leading in search of the earlier said kind of packaging materials. The role of zinc oxide (ZnO) loadings on poly(butylene adipate‐co‐terephthalate) (PBAT) structure were investigated, in addition to that packaging properties such as barrier, thermal, and mechanical properties were studied. Antimicrobial films are developed based on PBAT and ZnO nanoparticles. The nanocomposites exhibits a significant increase in the mechanical and thermal stability. The resulting PBAT/ZnO nanofilms show superior antimicrobial activity against Escherichia coli and Staphylococcus aureus. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and in vitro antibacterial assessment of novel chromones featuring 1,2,4‐oxadiazole

In search for a new antibacterial agent with improved antimicrobial spectrum and potency, we designed and synthesized a series of novel 3‐((Z)‐2‐(5‐methyl‐1,2,4‐oxadiazol‐3‐yl)‐2‐(4‐nitrophenyl)vinyl)‐4H‐chromen‐4‐ones 7a , 7b , 7c , 7d , 7e , 7f , 7g , 7h by convergent synthesis approach. All the synthesized compounds were assayed for their in vitro antibacterial activities against gram‐negative and gram‐positive bacteria. The preliminary structure‐activity relationship to elucidate the essential structure requirements for the antimicrobial activity has been described. J. Heterocyclic Chem., (2011).     

A Novel Route to α,ω‐Bis(acrylamidopeptide)‐Terminated Oligo(ethylene oxide) and Hydrogels

A new family of α,ω‐bis(acrylamidopeptide)‐terminated macromonomers were prepared via the ring‐opening addition of 4,4‐dimethyl‐2‐vinyl‐ and 2‐isopropenyl‐4,4‐dimethyl‐oxazol‐5‐on to α,ω‐diamine‐terminated poly(ethylene oxide). These macromonomers were used to produce hydrogels by means of thermally induced free‐radical polymerization. Swelling behavior and mechanical properties of the resulting hydrogels were influenced by the macromonomer type and the crosslinking density, as reflected by the equilibrium water uptake.     

Cornstarch/Poly(vinyl alcohol) Biocomposite Blend Films: Mechanical Properties,Thermal Behavior,Fire Retardancy,and Antibacterial Activity

In the present study, biocomposite films of starch/poly(vinyl alcohol) (St/PVA) reinforced with delignified Grewia optiva fiber and methyl methacrylate (MMA) grafted fibers were prepared using citric acid as a plasticizer and glutaraldehyde as the cross-linker. The biocomposite films were subjected to evaluation of mechanical properties, biodegradability, and antibacterial properties. The biocomposite films were characterized by using Fourier transform-infrared (FT-IR) spectrophotometry, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA/DTA/DTG). SEM showed good adhesion between St/PVA blend matrix and fibers. The antimicrobial activity of biocomposite films against pathogenic bacteria such as Staphylococcus aureus and Escherichia coli was also explored. The results confirmed that the biocomposite films may be used for food packaging.     

One‐pot synthesis of a new high vinyl content hybrid silica monolith dedicated to nanoliquid chromatography

A new vinyltrimethoxysilane‐based hybrid silica monolith was developed and used as a reversed‐phase capillary column. The synthesis of this rich vinyl hybrid macroporous monolith, by cocondensation of vinyltrimethoxysilane with tetramethoxysilane, was investigated using an unconventional (formamide, nitric acid) porogen/catalyst system. A macroporous hybrid silica monolith with 80% in mass of vinyltrimethoxysilane in the feeding silane solution was obtained and compared to a more conventional low vinyl content hybrid monolith with only of 20% vinyltrimethoxysilane. Monoliths were characterized by scanning electron microscopy, ²⁹Si nuclear magnetic resonance spectroscopy and N₂ adsorption–desorption. About 80% of the vinyl precursor was incorporated in the final materials, leading to 15.9 and 61.5% of Si atoms bonded to vinyl groups for 20% vinyltrimethoxysilane and 80% vinyltrimethoxysilane, respectively. The 80% vinyltrimethoxysilane monolith presents a lower surface area than 20% vinyltrimethoxysilane (159 versus 551 m²/g), which is nevertheless compensated by a higher vinyl surface density. Chromatographic properties were evaluated in reversed‐phase mode. Plots of ln(k) versus percentage of organic modifier were used to assess the reversed‐phase mechanism. Its high content of organic groups leads to high retention properties. Column efficiencies of 170 000 plates/m were measured for this 80% vinyltrimethoxysilane hybrid silica monolith. Long capillary monolithic columns (90 cm) were successfully synthesized (N = 120 000).     

Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing

Lithography based additive manufacturing technologies (AMT) like stereolithography or digital light processing have become appealing methods for the fabrication of 3D cellular scaffolds for tissue engineering and regenerative medicine. To circumvent the use of (meth)acrylate‐based photopolymers, that suffer from skin irritation and sometimes cytotoxicity, new monomers based on vinyl esters were prepared. In vitro cytotoxicity studies with osteoblast‐like cells proofed that monomers based on vinyl esters are significantly less cytotoxic than (meth)acrylates. Photoreactivity was followed by photo‐differential scanning calorimetry and the mechanical properties of the photocured materials were screened by nanoindentation. Conversion rates and indentation moduli between those of acrylate and methacrylate references could be observed. Furthermore, osteoblast‐like cells were successfully seeded onto polymer specimens. Finally, we were able to print a 3D test structure out of a vinyl ester‐based formulation by μ‐SLA with a layer thickness of 50 μm. For in vivo testing of vinyl esters these 3D scaffolds were implanted into surgical defects of the distal femoral bone of adult New Zealand white rabbits. The obtained histological results approved the excellent biocompatibility of vinyl esters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

A novel method to prepare microporous and nanofibrous hydrogel scaffolds as neural tissue engineering

A new method to prepare poly (vinyl alcohol) hydrogels by nebulization method.is introduced. A blend of Poly (vinyl alcohol) (PVA), sodium gum malate (SGM) and cellulose nanofibers (CNFs) originated from Catha Edulis was prepared and tested as neural tissue substitutes. Glutaraldehyde (GLA) was used as a crosslinker. Presence of SGM and CNFs in the formulation improved the nebulization process of PVA solution as well as mechanical properties of the fabricated hydrogels. The tensile strength of neat PVA films attains 46.7 MPa, while the tensile strength was 94.23 MPa for crosslinked-PVA. The tensile strength was found to increase with the increase in the CNFs content in the PVA compared with PVA/SGM. These soft tissues were characterized by using FTIR, SEM, and DSC. Scanning electron microscopy (SEM) results showed that PVA/SGM/CNFs blends has a diameter about 50 ± 8µm. The hydrogels were tested also for antimicrobial activities against pathogenic bacteria like Candida albicans (fungus), Bacillus subtilis (G + Ve), Staphylococcus aureus (G + Ve), Proteus vulgaris (G ? Ve) and Erwinia carotovora (G ? Ve). Favorable mechanical, thermal properties and biodegradation nature of the hydrogels, as well as antimicrobial property indicate that prepared hydrogels are suitable for tissue engineering applications.     

Cationic polymerization of vinyl ethers and p‐methoxystyrene by a benign initiating system: Silver salt/arylmethyl halide/dialkyl sulfide

Three vinyl ethers (VEs: isobutyl vinyl ether, ethyl vinyl ether, and isopropyl vinyl ether) and an active styrene derivative, p‐methoxystyrene (pMOS), were employed for cationic polymerization using a benign initiating system, AgClO₄/Ph₂CHBr/dialkyl sulfide. Choosing a sulfide with suitable nucleophilicity was important for achieving controlled polymerization. Additionally, selecting an appropriate reaction temperature based on monomer reactivity was also crucial for suppressing side reactions. Highly controlled polymerizations of VEs and pMOS were further confirmed by proton nuclear magnetic resonance (¹H NMR) and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS). In addition, the coordination of the arylmethyl cation to the added base obviously influenced the initiation, as demonstrated by ¹H NMR analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 861–870     

Homo‐ and copolymers of hexafluoroisopropyl methacrylate and α‐fluoroacrylate with alkyl vinyl ethers: Microstructure and thermal properties

A study is reported, dealing with the microstructure and thermal behavior of the homopolymers of 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIM) and 1,1,1,3,3,3‐hexafluoroisopropyl α‐fluoroacrylate (HFIFA), as well as of their copolymers with various vinyl ethers. The aim of this work was a better understanding of the role that fluorine content and distribution—first in the monomer and then along the ensuring macromolecular chain—play in determining the polymerizability of the selected vinyl monomers, and the final properties of the polymeric material. Primary (n‐butyl, isobutyl, 2‐ethylhexyl), secondary (cyclohexyl), and tertiary (tert‐butyl) vinyl ethers were employed as the comonomers. A general tendency towards comonomer alternation was observed upon radical initiated copolymerization with HFIFA. On the other hand, the relatively more electron‐rich HFIM did not usually yield strictly alternating sequences, unless the bulky tert‐butyl vinyl ether was employed. The incorporation of electron‐rich vinyl ether monomers within a partially fluorinated polymeric chain by simple radical initiated process was considered particularly interesting in view of the possible application of these materials as water‐repellent protective coatings. In this case, the fluorinated units should provide the low energy surface (water repellency) and, possibly, photo‐ and thermostability, whereas the vinyl ether counits should grant improved adhesion and adequate film‐forming properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 32–45, 2001     

Synthesis of Vinyl Sulfones by Ring Opening of 4,4‐Dioxo‐2,3‐dihydrobenzo[b][1,4]oxathiines and Their In Situ Reactions with Nucleophilic or Electrophilic Agents

A new, mild method of synthesis of 2‐hydroxyphenyl vinyl sulfones from 4,4‐dioxo‐2,3‐dihydrobenzo[b][1,4]oxathiine derivatives is described. The products were further modified in situ, either by Michael addition of nucleophiles or by reaction of the 2‐hydroxy group with an electrophile. The method can be utilized to immobilize proteins on a suitable support, or for other similar applications, as generation of the vinyl sulfone is always accompanied by formation of phenolate anion that can be used to bond in situ the vinyl sulfone to a suitable support.     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Introducing new method for the synthesis of polycyclic compounds containing [1,3]dithiine derivatives,with anticancer and antibacterial activities against common bacterial strains between aquatic and human

In this study, glycerol:potassium carbonate used as a green deep eutectic solvent, for synthesis of polycyclic compounds containing [1,3]dithiine derivatives. The antimicrobial properties of the derivatives against Lactococcus garvieae and Edwardsiella tarda were tested as bacterial strains between aquatic and human based on the minimum inhibitory concentration (MIC), the minimum lethal concentration (MBC) and inhibition zone diameter (IZD). In addition to antimicrobial properties, cytotoxicity testing was performed against MCF-7 breast cancer cells via MTT cell viability assay.     

Synthesis and hydrogel formation of fluorine‐containing amphiphilic ABA triblock copolymers

Fluorine‐containing amphiphilic ABA triblock copolymers, poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether) [poly(HOVE‐b‐PFPOVE‐b‐HOVE)] (HFH), poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether] [poly(PFPOVE‐b‐HOVE‐b‐PFPOVE)] (FHF), and poly(n‐butyl vinyl ether)‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly(n‐butyl vinyl ether) [poly(NBVE‐b‐HOVE‐b‐NBVE)] (LHL), were synthesized, and their behavior in water was investigated. The aforementioned polymers were prepared by sequential living cationic polymerization of 2‐acetoxyethyl vinyl ether (AcOVE) and PFPOVE or NBVE, followed by hydrolysis of acetyl groups in polyAcOVE. FHF and LHL formed a hydrogel in water, whereas HFH gave a homogeneous aqueous solution. In addition, the gel‐forming concentration of FHF was much lower than that of corresponding LHL. Surface‐tension measurements of the aqueous polymer solutions revealed that all the triblock copolymers synthesized formed micelles or aggregates above about 1.0 × 10^?4 mol/L. The surface tensions of HFH and FHF solutions above the critical micelle concentration were lower than those of LHL, indicating high surface activity of fluorine‐containing triblock copolymers. Small‐angle X‐ray scattering measurements revealed that HFH formed a core‐shell sperical micelle in 1 wt % aqueous solutions, whereas the other block copolymers caused more conplicated assembly in the solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3751–3760, 2001