Detailed Optimization of Polycondensation Reaction via Direct C–H Arylation of Ethylenedioxythiophene

The polycondensation reaction of 3,4‐ethylenedioxythiophene with 2,7‐dibromo‐9,9‐dioctylfluorene via Pd‐catalyzed direct arylation gives poly[(3,4‐ethylenedioxythiophene‐2,5‐diyl)‐(9,9‐dioctylfluorene‐2,7‐diyl)]. The reaction conditions are optimized in terms of the Pd precatalysts, reaction time, and carboxylic acid additives. The combination of 1 mol% Pd(OAc)₂ and 1‐adamantanecarboxylic acid as an additive is the optimized catalytic system, and it yields the corresponding polymer with a molecular weight of 39 400 in 89% yield. The polycondensation reaction, followed by an end‐capping reaction, effectively provides a linear polymer without Br terminals.     

Conjugated polymers containing phenothiazine moieties in the main chain

Several conjugated polymers containing phenothiazine moieties in the main chain were synthesized by Knovenagel or Wittig condensations. The polymers were identified and characterized by ¹H‐NMR, IR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), UV‐vis and fluorescent (FL) spectra. Results indicated that the m‐polymer, which was prepared from the polycondensation of N‐octyl‐3,7‐diformylphenothiazine with m‐phenylene diacetonitrile, is the most thermally stable one in all the polymers synthesized. While, the p‐polymer, which was prepared from the polycondensation of N‐octyl‐3,7‐diformylphenothiazine with p‐phenylene diacetonitrile, is the most thermally instable one. The introduction of a cyano group made the absorption and emissive maxima red‐shift from 429 and 537 nm for the Ph‐polymer to 465 and 597 nm for the p‐polymer respectively. The quinoid structure formation allows the p‐polymer to have a lower band gap than any other polymers. Emissive spectra of all these polymers in tetrahydrofuran (THF) solution have a narrow half‐peak width. Copyright © 2006 John Wiley & Sons, Ltd.     

Conjugated Polymer Chains Confined in Vertical Nanocylinders of a Block‐Copolymer Film: Preparation,Characterization, and Optoelectronic Function

Hybrid materials composed of phase‐separated block copolymer films and conjugated polymers of the phenylenevinylene family (PPV) are prepared. The PPV chains are embedded in vertical cylinders of nanometer diameter in the block‐copolymer films. The cylinders span continuously the whole film thickness of 70 nm. Incorporation of the PPV chains into the one‐dimensional cylinders leads to modified photoluminescence spectra and to large absorption anisotropy. The hybrid films show electroluminescence from the PPV chains in a simple light‐emitting device at minute doping concentrations, and also exhibit a factor of 19 increase in electron transport efficiency along the single PPV chains.     

Facile Synthesis of Chiral Conjugated Polymer Based on BINOL Skeleton

The study of polymer supported chiral catalysts has attracted very extensive attention inrecent years'. The intrinsic advantages of these catalysts in organic synthetic chemistryare that they can be separated with the products by simple filtration. Traditionally,polymer chiral catalysts are prepared by allaching chiral ligand to sterically irregularpolymer backbone2. In this system, the catalytic sites are randomly oriented along thepolymer chain which makes it very difficult to systematically…     

Synthesis of the Stable Ordered Conjugated Polymer Poly(dibromodiacetylene) from an Explosive Monomer

Dibromobutadiyne is an extremely unstable compound that explodes at room temperature, even under inert atmosphere. This instability has limited the studies of dibromobutadiyne almost entirely to spectroscopic characterization. Here we report an approach to control the reactivity of dibromobutadiyne, via topochemical reaction in cocrystals, leading to the ordered polymer poly(dibromodiacetylene), PBDA. At low temperatures (?15 to ?18 °C), dibromobutadiyne can form cocrystals with oxalamide host molecules containing either pyridyl or nitrile side groups, in which halogen bonds align the dibromobutadiyne monomers for topochemical polymerization. The cocrystals with the bis(nitrile) oxalamide host undergo complete ordered polymerization to PBDA, demonstrated by solid‐state MAS‐NMR, Raman, and optical absorption spectroscopy. Once formed, the polymer can be separated from the host; unlike the monomer, PBDA is stable at room temperature.     

Stereospecifical Preparation of (E)-a-Stannyl-1-alkenylphosphonates and their Application in Stille Reaction

1-Alkenylphosphonates are very useful compounds for organic transformations1 and for the synthesis of biological active compounds 2. On the other hand, alkenylstannes are of particular synthetic interest and have attracted a great deal of attention in recent years3. For this reason, we anticipate the a-stannyl-1-alkenylphosphonates, a new class of 1, 1- difunctional reagents which combined a-stannyl and phosphonate groups in one molecule, will play an important role in organic synthesis. Th…     

含二乙炔类共轭聚合物的合成及性能研究

在以CuCl和四甲基乙二胺(TMEDA)作为催化剂和邻二氯苯作溶剂条件下,以二-(4-乙炔苯基)-4-辛氧基苯胺(M1)和3, 6-双(乙炔基)-N-辛基咔唑(M2)作为单体,通过Glaser-Hay氧化偶联反应合成了含有咔唑和三苯胺结构单元的聚芳烃二乙炔共轭聚合物.采用红外光谱、核磁共振谱、热失重分析、紫外吸收光谱和荧光光谱等方法对聚合物进行结构表征与性能测试.所得到的聚合物都溶于普通的有机溶剂(如四氢呋喃、二氯甲烷、氯仿、甲苯等).结果表明,聚合物具有优异的热稳定性,热失重5 %时,分解温度在400℃以上;在光激发的条件下,聚合物在二氯甲烷溶液中发射蓝光.     

熔融聚合法直接合成生物降解材料PLEG

以乳酸(LA)和分子量1000的聚乙二醇(PEG)为原料(mLA／mPEG=9),以氯化亚锡为催化剂(mc／mLA=0．005),165℃、70Pa下熔融聚合10h,合成生物降解材料聚乳酸-聚乙二醇(PLEG)。其[η]最高可达0．3398dL／g。直接熔融聚合法有利于降低其成本。     

Pd‐Catalysed Direct Arylation Polymerisation for Synthesis of Low‐Bandgap Conjugated Polymers and Photovoltaic Performance

Low‐bandgap conjugated copolymers based on a donor–acceptor structure have been synthesised via palladium‐complex catalysed direct arylation polymerisation. Initially, we report the optimisation of the synthesis of poly(cyclopentadithiophene‐alt‐benzothiadiazole) (PCPDTBT) formed between cyclopentadithiophene and dibromobenzothiadiazole units. The polymerisation condition has been optimised, which affords high‐molecular‐weight polymers of up to M _n = 70 k using N‐methylpyrrolidone as a solvent. The polymers are used to fabricate organic photovoltaic devices and the best performing PCPDTBT device exhibits a moderate improvement over devices fabricated using the related polymer via Suzuki coupling. Similar polymerisation conditions have also been applied for other monomer units.     

Microparticle‐Supported Conjugated Polyelectrolyte Brushes Prepared by Surface‐Initiated Kumada Catalyst Transfer Polycondensation for Sensor Applications

A ‘grafting‐from’ approach to synthesize microparticle‐supported conjugated polyelectrolyte brushes is presented. Poly(3‐bromohexylthiophene) is selectively grown from monodisperse organosilica microparticles by surface‐initiated Kumada catalyst‐transfer polycondensation (SI‐KCTP) and then ionizable amino groups are introduced by a two‐step polymer analogous transformation. Optical properties of the resulting microparticle‐supported conjugated polyelectrolyte brushes were found to be dependent on the surrounding chemical environment and thus the particles are promising materials for sensor applications.

     

Hydrogen‐Bonded Supramolecular Conjugated Polymer Nanoparticles for White Light‐Emitting Devices

Supramolecular polyfluorenol enable assembly into conjugated polymer nanoparticles (CPNs). Poly{9‐[4‐(octyloxy)phenyl]fluoren‐9‐ol‐2,7‐diyl} (PPFOH)‐based supramolecular nanoparticles are prepared via reprecipitation. PPFOH nanoparticles with diameters ranging from 40 to 200 nm are obtained by adding different amounts of water into DMF solution. Size‐dependent luminescence is observed in PPFOH‐based hydrogen‐bonded nanoparticles that is different from that of poly(9,9‐dioctylfluorenes). Finally, white light‐emitting devices using CPNs with a size of 80 nm exhibit white emission with the CIE coordinates (0.31, 0.34). Amphiphilic conjugated polymer nanoparticles are potential organic nano‐inks for the fabrication of organic devices in printed electronics.

     

星型多支化p-n结构窄带隙共轭分子的设计合成与性能研究

通过Suzuki偶联反应合成了三种多支化p-n结构窄带隙材料P1, P2和P3. 通过¹H NMR, ¹³C NMR, GC-MS/MALDI-TOF等表征了其化学结构, 并研究了其光物理性质、热力学性质、电化学性质及其电子结构与光电性能等. 结果表明这三种星型分子具有溶解性好、能隙窄、吸收光谱宽及热稳定性高等特点.     

Alkene Metathesis – A Tool for the Synthesis of Conjugated Polymers

Alkene metathesis is a superb methodology. We report the progress using alkene metathesis in the synthesis of polymeric organic semiconductors. Three classes of polymers have been synthesized using acyclic diene metathesis (ADMET) or ring opening metathesis polymerization (ROMP), viz., poly(acetylene)s (PA), poly(arylene‐vinylene)s (PAV), and organometallic polymers. For PAs, ROMP of cyclooctatetraenes is best, whereas for PAV, both ADMET and indirect and direct ROMP are viable. Metathesis performs flawlessly with the correct monomers, as molybdenum and particularly the robust Ru carbenes demonstrate. When performing ROMP, one is often rewarded with structurally uniform polymers that can display very low polydispersities. Overall, metathesis is a powerful tool for the preparation of semiconducting polymers.     

Synthesis and characterization of soluble conjugated polymers having pyrene moiety in the main chain

Three new alternating conjugated polymers consisting of pyrene and 3‐dodecylthiophene ( PPyMT ), 4,4′‐didodecyl‐2,2′‐bithiophene ( PPyBT ), or 9,9‐didodecylfluorene ( PPyFlu ) moieties have been prepared using Suzuki coupling reaction or Sugimoto approaches. The polymers were readily soluble in common organic solvents and exhibited good thermal stability in nitrogen and air atmospheres. The structures and optical properties of the polymers were characterized by NMR, FTIR, XRD, UV–vis, and fluorescence spectroscopy. PPyMT and PPYBT showed blue‐light emission in solution, whereas PPyFlu performed blue‐light emitting in film state. The polymers exhibited an intermolecular aggregation and structural ordering due to pyrene–pyrene π–π stacking interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of π‐Conjugated Polymer Consisting of Pyrrole and Fluorene Units by Ru‐Catalyzed Site‐Selective Direct Arylation Polycondensation

Polycondensation of 1‐(2‐pyrimidinyl)pyrrole with 2,7‐dibromo‐9,9‐dioctylfluorene via Ru‐catalyzed direct arylation gives the corresponding conjugated polymer with a molecular weight of 19 800 in 86% yield. The introduction of directing group, 2‐pyrimidinyl substituent, into the pyrrole monomer induces ortho‐metalation and provides the site‐selective direct arylation polycondensation at the α‐position of pyrrole unit without the protection of β‐position. The removal of 2‐pyrimidinyl substituent on the pyrrole unit proceeds efficiently and results in the enhancement of coplanarity along the main chain of the polymer.

     

Synthesis and characterization of isoindigo‐based polymers using CH‐arylation polycondensation reactions for organic photovoltaics

A series of three new low bandgap donor–acceptor–donor–acceptor^/ (D–A–D–A^/) polymers have been successfully synthesized based on the combination of isoindigo as the electron‐deficient acceptor and 3,4‐ethylenedioxythiophene as the electron‐rich donor, followed by CH‐arylation with different acceptors (4,7‐dibromo[c][1,2,5]‐(oxa, thia, and/or selena)diazole ( 4a‐c )). These polymers were used as donor materials for photovoltaic applications. All of the polymers are highly stable and show good solubility in chlorinated solvents. The highest power conversion efficiency of 1.6% was achieved in the bulk heterojunction photovoltaic device that consisted of poly ((E)?6‐(7‐(benzo‐[c][1,2,5]‐thiadiazol‐4‐yl)?2,3‐dihydrothieno‐[3,4‐b][1,4]dioxin‐5‐yl)?6′‐(2,3‐dihydrothieno‐[3,4‐b][1,4]‐dioxin‐5‐yl)?1,1′‐bis‐(2‐octyldodecyl)‐[3,3′‐biindolinylidene]‐2,2′‐dione) as the donor and PC₆₁BM as the acceptor, with a short‐circuit current density (J_sc) of 8.10 mA/cm², an open circuit voltage (V_oc) of 0.56 V and a fill factor of 35%, which indicates that these polymers are promising donors for polymer solar cell applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2926–2933     

Perdeuterated Conjugated Polymers for Ultralow-Frequency Magnetic Resonance of OLEDs

The formation of excitons in OLEDs is spin dependent and can be controlled by electron-paramagnetic resonance, affecting device resistance and electroluminescence yield. We explore electrically detected magnetic resonance in the regime of very low magnetic fields (<1 mT). A pronounced feature emerges at zero field in addition to the conventional spin- Zeeman resonance for which the Larmor frequency matches that of the incident radiation. By comparing a conventional π-conjugated polymer as the active material to a perdeuterated analogue, we demonstrate the interplay between the zero-field feature and local hyperfine fields. The zero-field peak results from a quasistatic magnetic-field effect of the RF radiation for periods comparable to the carrier-pair lifetime. Zeeman resonances are resolved down to 3.2 MHz, approximately twice the Larmor frequency of an electron in Earth's field. However, since reducing hyperfine fields sharpens the Zeeman peak at the cost of an increased zero-field peak, we suggest that this result may constitute a fundamental low-field limit of magnetic resonance in carrier-pair-based systems. OLEDs offer an alternative solid-state platform to investigate the radical-pair mechanism of magnetic-field effects in photochemical reactions, allowing models of biological magnetoreception to be tested by measuring spin decoherence directly in the time domain by pulsed experiments.     

Perdeuterated Conjugated Polymers for Ultralow‐Frequency Magnetic Resonance of OLEDs

The formation of excitons in OLEDs is spin dependent and can be controlled by electron‐paramagnetic resonance, affecting device resistance and electroluminescence yield. We explore electrically detected magnetic resonance in the regime of very low magnetic fields (<1 mT). A pronounced feature emerges at zero field in addition to the conventional spin‐ Zeeman resonance for which the Larmor frequency matches that of the incident radiation. By comparing a conventional π‐conjugated polymer as the active material to a perdeuterated analogue, we demonstrate the interplay between the zero‐field feature and local hyperfine fields. The zero‐field peak results from a quasistatic magnetic‐field effect of the RF radiation for periods comparable to the carrier‐pair lifetime. Zeeman resonances are resolved down to 3.2 MHz, approximately twice the Larmor frequency of an electron in Earth's field. However, since reducing hyperfine fields sharpens the Zeeman peak at the cost of an increased zero‐field peak, we suggest that this result may constitute a fundamental low‐field limit of magnetic resonance in carrier‐pair‐based systems. OLEDs offer an alternative solid‐state platform to investigate the radical‐pair mechanism of magnetic‐field effects in photochemical reactions, allowing models of biological magnetoreception to be tested by measuring spin decoherence directly in the time domain by pulsed experiments.     

Biohybrid Conjugated Polymer Materials for Augmenting Energy Conversion of Bioelectrochemical Systems

Bioelectrochemical systems (BESs) provide favorable opportunities for the sustainable conversion of energy from biological metabolism. Biological photovoltaics (BPVs) and microbial fuel cells (MFCs) respectively realize the conversion of renewable solar energy and bioenergy into electrical energy by utilizing electroactive biological extracellular electron transfer, however, along with this energy conversion progress, relatively poor durability and low output performance are challenges as well as opportunities. Advances in improving bio-electrode interface compatibility will help to solve the problem of insufficient performance and further have a far-reaching impact on the development of bioelectronics. Conjugated polymers (CPs) with specific optical and electrical properties (absorption and emission spectra, energy band structure and electrical conductivity) afforded by π-conjugated backbones are conducive to enhancing the electron generation and output capacity of electroactive organisms. Furthermore, the water solubility, functionality, biocompatibility and mechanical properties optimized through appropriate modification of side chain provide a more adaptive contact interface between biomaterials and electrodes. In this minireview, we summarize the prominent contributions of CPs in the aspect of augmenting the photovoltaic response of BPVs and power supply of MFCs, and specifically discussed the role of CPs with expectation to provide inspirations for the design of bioelectronic devices in the future.     

Peroxyoxalate Chemiluminescence Based on Fluorescent Conjugated Polymer for the Determination of Triton X-100

A novel peroxyoxalate chemiluminescence system has been designed for the determination of Triton X‐100 (TX‐100), in which a hydrophobic fluorescent conjugated polymer, poly[2,5‐bisnonyloxy‐1,4‐phenylene‐ethynylene‐9,10‐anthrylene] (PPEA) was employed as a fluorophor. A strong enhanced intensity of chemiluminescence (CL) was observed in the presence of TX‐100, due to the improved emission efficiency of PPEA in the presence of TX‐100. Under optimum conditions, the detection range of Triton X‐100 is between 1.0×10^?7 and 1.0× 10^?4 mol·L^?1, with a detection limit at 6.0×10^?8 mol·L^?1. The relative standard deviation is 2.4% (n=6) for 1.0×10^?6 mol·L^?1 Triton X‐100. This method provides satisfying results in the detection of TX‐100 in nature water and biological samples with high sensitivity and wide linear range.