Poly(glycerol sebacate) nanofiber scaffolds by core/shell electrospinning

The novel biomaterial poly(glycerol sebacate) (PGS) holds great promise for tissue engineering and regenerative medicine. PGS is a rubbery, degradable polymer much like elastin; however, it has been limited to cast structures. This work reports on the formation of PGS nanofibers in random non-woven mats for use as tissue engineering scaffolds by coaxial core/shell electrospinning. PGS nanofibers are an inexpensive and synthetic material that mimics the chemical and mechanical environment provided by elastin fibers. Poly(lactide) was used as the shell material to constrain the PGS during the curing process and was removed before cell seeding. Human microvascular endothelial cells from skin (HDMEC) were used to evaluate the in-vitro cellular compatibility of the PGS nanofiber scaffolds. [Figure: see text].     

Porous poly(glycerol sebacate) (PGS) elastomer scaffolds for skin tissue engineering

Poly (glycerol sebacate) (PGS) elastomer scaffolds with different porosity for skin tissue engineering were fabricated via particulate leaching. The introduction of pores lowers the hydrophilicity but improves the water uptake capability of PGS. The gel content of PGS increases with the increase of salt mass ratio, but the degree of swelling goes the opposite way due to the existence of the porous structure. The degradation rate of PGS can be tailored and controlled by the porous structure, which is of great value for its applications in tissue engineering. The feasibility of these porous PGS scaffolds for skin tissue engineering was evaluated by seeding mouse dermal fibroblasts (MDFs) onto the scaffold. In vitro cell culture results indicate good attachment, proliferation and deep penetration of MDFs into porous PGS scaffolds, which confirms the excellent biocompatibility of these scaffolds.     

Preparation and Characterization of PVA Hidrogels Nanofibers

Summary: Poly(vinyl alcohol) (PVA) is a biomaterial that has interesting features for applications in soft tissue replacement due to its similarities in the mechanical properties of such tissues. This paper describes the preparation and characterization of PVA fibers obtained by electrospinning and crosslinked with potassium persulfate as thermoinitiator. These PVA fibers were characterized by Scanning Electron Microscopy (SEM) and Optical Microscopy (OM) to analyze the morphology of the spun samples. Finally, Fourier Transform Infrared Spectroscopy (FTIR) and differential scanning calorimetry (DSC) were performed and the results showed that the biomaterial was partially cross-linked, which indicates a potential use for dermal regeneration applications. The morphology of the fibers indicated that structural changes occurred in the biomaterial after thermal crosslinking.     

Photo‐Induced Solid‐State Crosslinking of Electrospun Poly(vinyl alcohol) Fibers

Summary: Poly(vinyl alcohol) (PVA) was derivatized by polymer analogous reaction with thienyl acryloyl chloride and processed to submicrometer fibers by electrospinning from aqueous solution. Water solubility of otherwise water‐soluble PVA fibers was reduced considerably by UV crosslinking of thienyl acrylate modified PVA fibers in the solid state. Water stability of these crosslinked fibers was proven by water steam test at 95 °C.

UV/Vis spectrum of PVA‐Thio fibers irradiated for different periods at 300 nm.     

Preparation and Characterization of Interpenetrating Polymer Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol)

Interpenetrating polymer hydrogels (IPHs) of Poly (vinyl alcohol) (PVA) and Poly (acrylic acid) (PAAc) have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N, N′-methylenebisacrylamide in the presence of PVA. The application of freezing-thawing cycles (F-T cycles) leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and the viscoelastic properties of the prepared IPHs were evaluated on the basis of the structural features obtained from solid state ¹³C-NMR spectroscopy.     

Silk fibroin microfibers and chitosan modified poly (glycerol sebacate) composite scaffolds for skin tissue engineering

Porous mSF/PGS and CS/PGS composite scaffolds were prepared by the combination of poly(glycerol sebacate) (PGS) with silk fibroin microfibers (mSF) and chitosan (CS) as modifiers through particulate leaching and freeze-drying techniques. Both mSF/PGS and CS/PGS scaffolds show highly interconnected and open porous structures, and the crosslink density and water absorption of PGS were obviously enhanced by the modifiers. Moreover, the silk fibroin microfiber and chitosan can slow down and control the degradation rate of PGS. The biocompatibility of these porous PGS based composite scaffolds for skin tissue engineering was evaluated by cell culture experiments, and the results indicate of the good attachment, proliferation and deep penetration of cells into these composite scaffolds.     

Control the Mechanical Properties and Degradation of Poly(Glycerol Sebacate) by Substitution of the Hydroxyl Groups with Palmitates

Mechanical properties and degradation profile are important parameters for the applications of biodegradable polyester such as poly(glycerol sebacate) in biomedical engineering. Here, a strategy is reported to make palmitate functionalized poly(glycerol sebacate) (PPGS) to alter the polymer hydrophobicity, crystallinity, microstructures and thermal properties. The changes of these intrinsic properties impart tunable degradation profiles and mechanical properties to the resultant elastomers depending on the palmitate contents. When the palmitates reach up to 16 mol%, the elastic modulus is tuned from initially 838 ± 55 kPa for the PGS to 333 ± 21 kPa for the PPGS under the same crosslinking conditions. The elastomer undergoes reversible elastic deformations for at least 1000 cycles within 20% strain without failure and shows enhanced elasticity. The polymer degradation is simultaneously inhibited because of the increased hydrophobicity. This strategy is different with other PGS modifications which could form a softer elastomer with less crosslinks but typically lead to a quicker degradation. Because the materials are made from endogenous molecules, they possess good cytocompatibility similar to the PGS control. Although these materials are designed specifically for small arteries, it is expected that they will be useful for other soft tissues too.     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Improving the Processing Ability and Mechanical Strength of Starch/Poly(vinyl alcohol) Blends through Plasma and Acid Modification

Summary: In this study, maleic anhydride (MA), and citric acid (CA) used as the processing additive and plasma treatment to improve the processing ability and mechanical strength of biodegradable starch/poly (vinyl alcohol) (PVA) blends were studied. The melt flow index (MFI) of starch/ glycerol/PVA (300g/60g/80g) blend was increased from 2.3g/10min to 32.7g/10min by adding 3g of MA and to 130 g/10min by adding MA and plasma treatment. The tensile strength of starch/glycerol/PVA blend increased from 3.48 to 6.21 MPa by adding 1.5g of MA and 1.5g of CA, while it increased to 6.26 MPa by plasma treatment. Esterification reaction which was evidenced by FTIR has been showed to improve the compatibility between starch and PVA when MA was dissolved into glycerol and glycerol grafted onto plasma pretreatment PVA. Thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) imaging were used to study the morphology of extruded blends.     

Characteristics and degradation of hybrid composite films prepared from PVA,starch and lignocellulosics

A research cooperation between USDA and the University of Pisa led to the development of several composite blends of poly(vinyl alcohol) (PVA) and lignocellulosic fibers. The cast films were prepared by blending orange fibers (OR-fibers) and PVA with and without cornstarch to yield flexible and cohesive films. To improve properties, films were also prepared by crosslinking PVA, starch and OR-fibers with hexamethoxymethylmelamine (HMMM). Films were evaluated for their thermal stability, water permeability and biodegradation. Thermal gravimetric analyses indicated the potential usefulness of such blends in several thermoplastic applications. Films were permeable to water, and retained the moisture content in the soil while retaining their integrity. Films generally biodegraded within 30 days in compost, achieving between 50-80% mineralization. Both neat PVA and blends that had been crosslinked showed comparatively slow degradation. A possible stimulating effect of lingocellulosic fillers on the biodegradation of PVA in blends has been observed.     

Physical Hydrogels of Poly(vinyl alcohol) with Different Syndiotacticity Prepared in the Presence of Lactosilated Chitosan Derivatives

Poly(vinyl alcohol) (PVA) physical hydrogels were prepared by repeated freeze–thawing cycles using aqueous solutions of two PVA samples having different degrees of syndiotacticity, a‐PVA and s‐PVA with 55% and 61% of syndiotactic diads, respectively. The hydrogels were prepared in the presence of different amounts of lactosilated chitosan derivatives (LC) of different molecular weight. The PVA stereoregularity was found to have a dramatic effect on the amount of PVA incorporated into the hydrogels, leading to remarkable differences in the swelling degree and porosity of a‐PVA and s‐PVA hydrogels. A significant amount of LC was retained in the hydrogels after equilibrium swelling. The swelling of the a‐PVA hydrogels was found to increase significantly by increasing the amount of LC while it was only slightly increased in the case of s‐PVA hydrogels. The amount of LC released after equilibrium swelling was lower when chitosan derivatives with higher molecular weights were used. Increased initial concentrations of LC resulted in much higher porosity of the hydrogels. TGA and DSC studies showed that LC is stabilized by the incorporation in the PVA hydrogels. The melting temperature of the crystalline regions of PVA was not significantly influenced by LC. Conversely, the extension of the crystalline domains increased in the presence of LC. The retention of a chitosan derivative bearing β‐D ‐galactose side chain residues makes these hydrogels potentially useful as scaffolds for hepatocytes culture.

Scanning electron micrographs of PVA‐LC hydrogels: (a) a‐PVA; (b) a‐PVA/LC₁₅₀ 80:20; (c) a‐PVA/LC₁₅₀ 50:50.     

PEGylated poly(ester amide) elastomer scaffolds for soft tissue engineering

Biodegradable synthetic elastomers with tunable mechanical and physicochemical properties remain attractive materials for soft tissue engineering. We have recently synthesized novel poly(1,3‐diamino‐2‐hydroxypropane‐co‐glycerol sebacate)‐co‐poly(ethylene glycol) (APS‐co‐PEG) biodegradable elastomers. This class of PEGylated elastomers has widely tunable mechanical and degradation properties compared wtih currently available biodegradable elastomers. To further investigate the biological application of this class of elastomers, we fabricated hybrid APS‐co‐PEG/polycaprolactone (PCL) porous scaffolds by electrospinning. The fiber morphology, chemical composition, mechanical properties, degradability, and cytocompatibility of hybrid APS‐co‐PEG/PCL electrospun scaffolds were characterized. These scaffolds exhibited a wide range of mechanical properties and similar cytocompatibility to PCL scaffolds. Importantly, PEGylation inhibited platelet adhesion on all APS‐co‐PEG/PCL electrospun scaffolds when compared with PCL and APS/PCL scaffolds, suggesting a potential role in mitigating thrombogenicity in vivo. Additionally, APS‐25PEG/PCL scaffolds were found to be mechanically analogous to human heart valve leaflet and supported attachment of human aortic valve cells. These results reveal that hybrid APS‐co‐PEG/PCL scaffolds may serve as promising constructs for soft tissue engineering, especially heart valve tissue engineering. Copyright © 2017 John Wiley & Sons, Ltd.     

Alignment effect of attapulgite on the mechanical properties of poly(vinyl alcohol)/attapulgite nanocomposite fibers

Poly(vinyl alcohol) (PVA)/attapulgite (AT) nanocomposite fibers have been prepared by wet spinning. The morphology and mechanical properties of the modified PVA fibers have been characterized with transmission electron microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), birefringence measurements, and mechanical testing. The PVA/AT nanocomposite fibers show much higher tensile strength, initial modulus, and work to break than pure PVA fibers with the same draw ratio. SEM observations demonstrate that the AT nanorods can align orderly along the fiber axis by stretching and have good adhesion to the fiber matrix. The results of birefringence measurements prove that the modified fibers have higher orientation than pure PVA fibers after stretching. The results of DSC analysis indicate that the crystallinity of the PVA fibers can be increased by the addition of AT. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1995–2000, 2006     

Synthesis and characterization of poly(vinyl alcohol)‐graft‐[poly(D,L‐lactide)/poly(D,L‐lactide‐co‐glycolide)] hydrogels

Poly(D ,L ‐lactide) and poly(D ,L ‐lactide‐co‐glycolide) with various composition and with one methacrylate and one carboxylate end group were synthesized and grafted onto poly(vinyl alcohol) (PVA) via the carboxylate group. The graft copolymers were crosslinked via the methacrylate groups using a free radical initiator. The polymer networks were characterized by means of NMR and studied qualitatively by means of IR spectroscopy. The influence of the glycolide content in the polyester grafts and of the number of ester units in the grafts on thermal properties and swellability were studied as well. The high swellability in water is characteristic of all hydrogels. Differential scanning calorimetry (DSC) showed a single glass transition temperature that occurs in the range between 51 and 69 °C. Thermogravimetric analysis (TGA) of the networks showed the main loss in weight in the temperature range between 290 and 370 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4536–4544, 2007     

Preparation of novel thermoplastic poly(vinyl alcohol) with improved processability for fused deposition modeling

In this work, thermoplastic poly (vinyl alcohol) (PVA) with improved processability for fused deposition modeling (FDM) was successfully prepared via intermolecular complexation and plasticization. The glycerol and water, which were non‐toxic and have a complementary structure with PVA, were adapted to realize FDM processing of PVA, thus providing a novel biomaterial with FDM processability. The result showed that the water and glycerol could interrupt hydrogen bonding in PVA and reduce the melting point of PVA to 127.4°C. Moreover, the water fraction of the plasticizer had a significant effect on the FDM processability and usability of the final parts. When the water fraction was greater than 75%, the PVA/plasticizer was unsuitable for FDM processing. However, when the water fraction was lower than 25%, the glycerol precipitated from the modified PVA. Thus, a mixture of 50% water and 50% glycerol was most suitable for FDM processing. A 0.3 mm layer thickness with a nozzle temperature of 175°C was chosen as the optimal processing condition for FDM using thermoplastic PVA. Finally, complex PVA parts with high dimensional accuracy, good mechanical properties, and designated structures were fabricated by FDM machine.     

Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method

Nanoscale poly(vinyl alcohol) (PVA) fiber (100–500 nm) aggregates were prepared with an electrospinning technique. Additionally, a chemical crosslinking method was used to crosslink the nanoscale PVA fiber aggregates. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and scanning electron microscopy techniques were employed to characterize the PVA fiber aggregates. The different crosslinking densities of the PVA fiber aggregates were obtained through the control of the weight percentage of glyoxal to PVA. The crosslinking densities due to heat treatment and chemical crosslinking were studied. The influence of heat treatment could be neglected in contrast to chemical crosslinking when the curing temperature was 120 °C. The primary factor that affected the crosslinking density was the volume of the chemical crosslinking agent. The results showed that the properly crosslinked PVA fiber aggregates had better antiwater solubility and mechanical properties than the noncrosslinked PVA fiber aggregates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1261–1268, 2002     

Proton conductivity in crosslinked hydrophilic ionic polymer system: Competitive hydration,crosslink heterogeneity,and ineffective domains

High proton conductivity in hydrophobic backbone‐based polymers such as Nafion is known to be due to the formation of organized ionic clusters and channels upon hydration. However, a lower proton conductivity in hydrophilic, ionic polymers and the role played by the microstructure are not well understood. In this work, we demonstrate the importance of heterogeneity in crosslinked ionic polymer networks in explaining proton conductivity. Poly(vinyl alcohol) (PVA) crosslinked with sulfosuccinic acid (SSA) is used as the model polymer system for the study. Evolution of the microstructure with hydration and the effect on proton conductivity are analyzed using ATR‐FTIR spectroscopy, dielectric spectroscopy, and small‐angle neutron scattering. We show that the presence of the two hydrophilic groups in PVA‐SSA (hydroxyl and sulfonic acid), as opposed to Nafion, results in competition for water and a lower proton conductivity. The crosslinked polymer–water system contains heterogeneous domains of crosslink nodes which are conductive. These domains (of size 20–35 Å) interconnect with each other and form tortuous percolating domains through which proton conduction takes place. The presence of hydroxyl groups results in some of the domains being ineffective for proton transport, resulting in a lower conductivity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1087–1101     

Ultrafine hydrogel fibers with dual temperature‐ and pH‐responsive swelling behaviors

Ultrafine hydrogel fibers that were responsive to both temperature and pH signals were prepared through the electrospinning of poly(N‐isopropylacrylamide) (PNIPAAm) and poly(acrylic acid) mixtures in dimethylformamide. Both the diameters (700 nm to 1.2 μm) and packing of the fibers could be controlled through changes in the polymer compositions and PNIPAAm molecular weights. These fibers were rendered water‐insoluble by the addition of either Na₂HPO₄ or poly(vinyl alcohol) (PVA) to the solution, followed by the heat curing of the fibers. The fibers crosslinked with Na₂HPO₄ swelled to 30–120 times in water; this was significantly higher than the swelling of those crosslinked with PVA. The PVA‐crosslinked hydrogel fibers, however, exhibited faster swelling kinetics; that is, they reached equilibrium swelling in less than 5 min at 25 °C. They were also more stable after 1 week of water exposure; that is, they lost less mass and retained their fibrous form better. All the hydrogel fibers showed a drastic increase in the swelling between pH 4 and 5. The PVA‐crosslinked hydrogel fibers exhibited distinct temperature‐responsive phase‐transition behavior of PNIPAAm, whereas the Na₂HPO₄‐crosslinked hydrogel fibers showed altered two‐stage phase transitions that reflected side‐chain modification of PNIPAAm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6331–6339, 2004     

The controlled release behavior and pH‐ and thermo‐sensitivity of alginate/poly(vinyl alcohol) blended hydrogels

Poly(vinyl alcohol) (PVA) was blended with sodium alginate (Alg) in various ratios and crosslinked with calcium chloride and made into hydrogel membranes. The dependence of the swelling behavior of these Alg‐Ca/PVA hydrogels on pH was investigated. The temperature‐dependent swelling behavior of the semi‐interpenetrating network (semi‐IPN) hydrogels was examined at temperatures from 2 to 45°C and the enthalpy of mixing (ΔH_mix) was determined at various temperatures. The molecular structure of the hydrogels was studied by infrared spectroscopy and their water structure in the semi‐IPN hydrogels was measured by differential scanning calorimetry (DSC). The influence of Ca²⁺ content on the network structure of Alg‐Ca/PVA hydrogels was investigated in terms of the compressive elastic modulus, effective crosslinking density, and the polymer–solvent interaction parameter based on the Flory theory. The loading of alizarin red S (ARS) followed the Langmuir isotherm mechanism and the release kinetics of ARS from the Alg‐Ca/PVA hydrogels followed the Fickian diffusion mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and thermal properties of thermoplastic poly(vinyl alcohol) complexes with boronic acids

Poly(vinyl alcohol) (PVA) was converted into melt flowable derivatives by complexation with a small amount of n-butyl boronic acid (BBA) and phenyl boronic acid (PBA) in dimethylsulfoxide (DMSO), and their thermal properties were examined from a viewpoint of the melt spinning of the complexes. It was found that (1) the melting temperature of the PVA–boronic acid complexes decreases and their degradation temperature increases with increasing the boronic acid content; (2) no gelation occurs for the PVA complexes with BBA and PBA in DMSO; (3) PBA gives a larger melting-temperature depression for PVA than BBA, but the spinnability of the complexes with BBA is much better than that with PBA; and (4) the melt-molded PVA complex fibers can be easily regenerated into PVA fibers with hot water. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3045–3050, 1998