One‐pot,four‐component synthesis of 1,3,4‐oxadiazole derivatives containing a ferrocene unit and their antimicrobial activity

A four‐component reaction between aromatic carboxylic acids, (N‐isocyanimino)triphenylphosphorane, ferrocenecarbaldehyde and dibenzylamine is reported. This approach is an efficient, simple and high‐yield procedure for the synthesis of 1,3,4‐oxadiazole derivatives containing a ferrocene unit. The antimicrobial activities of the products were investigated against Staphylococcus aureus and Pseudomonas aeruginosa in in vitro and in vivo assays. Copyright © 2015 John Wiley & Sons, Ltd.     

A One‐pot Green Synthesis of Alkylidenesuccinimides

A mild and facile Wittig reaction between N‐substituted maleimides and aldehydes has been developed. Various synthetically valuable alkylidenesuccinimides were obtained from this one‐pot reaction in high yields (up to 99%). The product was obtained by simple filtration and no extra purification was necessary. Ethanol, an environment‐benign solvent, was found to be a suitable reaction medium.     

Facile synthesis of tetrahydrobenzoxanthenones via a one‐pot three‐component reaction using an eco‐friendly and magnetized biopolymer chitosan‐based heterogeneous nanocatalyst

A chitosan‐based magnetic nanocomposite was synthesized by an eco‐friendly and simple procedure, and was characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. It was then used for the efficient synthesis of tetrahydrobenzoxanthen‐11‐one derivatives via a one‐pot three‐component condensation of 2‐naphthol, various aldehydes and dimedone in ethanol. The catalyst was recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐pot Green Procedure for Synthesis of Tetrahydrobenzo[a]xanthene‐11‐one Catalyzed by Brønsted Ionic Liquids under Solvent‐free Conditions

An efficient one‐pot condensation of β‐naphthol, aldehydes and cyclic 1,3‐dicarbonyl compound has been achieved with ionic liquids as catalyst, thus a variety of 8,9,10,12‐tetrahydrobenzo[a]xanthen‐11‐one derivatives were prepared in good yields. The present approach offers several advantages such as shorter reaction times, good yields and mild reaction conditions.     

Green synthesis of polyhydroquinolines catalyzed by silica‐supported ionic liquid Si–[SbSipim][PF6]

Silica‐supported ionic liquid Si–[SbSipim][PF₆] as a catalyst was used first in the synthesis of polyhydroquinolines. The catalyst exhibits high catalytic activity in the reaction, and can be easily recovered and reused without significant loss of its activity for six runs. This green method offers several advantages, including high yield, short reaction time, simple work‐up procedure, ease of separation, and recyclability of the catalyst.     

Tandem One‐pot Synthesis of Polysubstituted 1,3‐Thiazine Derivatives

A tandem one‐pot synthesis of polysubstituted 1,3‐thiazines has been developed by reacting with cyanoacetamide and isothiocyanate derivatives to give rise to 2‐cyano‐3‐mercaptoacrylamides, which are trapped in situ by various aldehydes or diversely substituted ketones through intermolecular cyclization, providing polysubstituted 1,3‐thiazine derivatives in short reaction times with good to excellent yields. The salient features of this novel protocol are operational simplicity, accessing the desired products from the readily available starting materials and easy of product isolation and may find wide spread applications in medicinal chemistry.     

One‐pot synthesis of star‐block copolymers using double click reactions

3‐Arm star‐block copolymers, (polystyrene‐b‐poly(methyl methacrylate))₃, (PS‐b‐PMMA)₃, and (polystyrene‐b‐poly(ethylene glycol))₃, (PS‐b‐PEG)₃, are prepared using double‐click reactions: Huisgen and Diels–Alder, with a one‐pot technique. PS and PMMA blocks with α‐anthracene‐ω‐azide‐ and α‐maleimide‐end‐groups, respectively, are achieved using suitable initiators in ATRP of styrene and MMA, respectively. However, PEG obtained from a commercial source is reacted with 3‐acetyl‐N‐(2‐hydroxyethyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide (7) to give furan‐protected maleimide‐end‐functionalized PEG. Finally, PS/PMMA and PS/PEG blocks are linked efficiently with trialkyne functional linking agent 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane 2 in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) at 120 °C for 48 h to give two samples of 3‐arm star‐block copolymers. The results of the peak splitting using a Gaussian deconvolution of the obtained GPC traces for (PS‐b‐PMMA)₃ and (PS‐b‐PEG)₃ displayed that the yields of target 3‐arm star‐block copolymers were found to be 88 and 82%, respectively. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7091–7100, 2008     

One‐pot synthesis of hexahydroquinolines Via a four‐component cyclocondensation under microwave irradiation in solvent free conditions: A green chemistry strategy

Four‐component cyclocondensation of aromatic aldehydes, malononitrile, dimedone and ammonium acetate proceeds under microwave irradiation in solvent free conditions to give highly functionalized hexahydroquinolines in excellent yields.     

A One‐Pot O‐Phosphinative Passerini/Pudovik Reaction: Efficient Synthesis of Highly Functionalized α‐(Phosphinyloxy)amide Derivatives

A one‐pot O‐phosphinative Passerini/Pudovik reaction has been developed, based on reacting aldehydes, isocyanides, and phosphinic acids followed by the addition of second aldehydes to form the corresponding α‐(phosphinyloxy)amide derivatives. This is the first reported instance of a Passerini‐type, isocyanide‐based multicomponent reaction using a phosphinic acid instead of a carboxylic acid. The nucleophilicity of the phosphinate group allows a subsequent catalytic Pudovik‐type reaction, affording the highly functionalized α‐(phosphinyloxy)amide derivative in high yield. A wide range of aldehydes and isocyanides are applicable to this reaction.     

Design,synthesis, characterization and catalytic performance of a new cellulose‐based magnetic nanocomposite in the one‐pot three‐component synthesis of α‐aminonitriles

A sulfonated magnetic cellulose‐based nanocomposite was prepared and characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. Then, it was used as a green nanocatalyst for the synthesis of α‐aminonitriles by a one‐pot three‐component condensation reaction of aldehydes or ketones, amines and trimethylsilylcyanide in ethanol at room temperature. The reaction procedure is simple, yields are very high, reaction time is very short and the catalyst can be easily separated from the reaction mixture and reused in subsequent reactions without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

NIS‐Assisted Aza‐Friedel–Crafts Reaction with α‐Carbamoysulfides as Precursors of N‐Carbamoylimines

A general and practical N‐iodosuccinimide (NIS)‐promoted aza‐Friedel–Crafts reaction of various aromatic nucleophiles with N‐acylimines generated in situ from α‐amidosulfides to give a rapid access to highly functionalized amines is described. The newly developed methodology is very mild, fast, efficient, and complementary.     

Palladium‐Catalyzed Three‐Component Cascade Cyclization Reaction of Bisallenes with Propargylic Carbonates and Organoboronic Acids: Efficient Construction of cis‐Fused Bicyclo[4.3.0]nonenes

A bicycle built for two : The title reaction affords cis‐fused bicyclo[4.3.0]nonenes from readily available 1,5‐bisallenes with structurally diverse propargylic carbonates and arylboronic acids (see scheme; X=NTs, C(E¹)₂ with E¹=CO₂Bn, SO₂Ph, dba=trans,trans‐dibenzylidenacetone). The reaction may involve a sequential oxidative addition, two different types of three carbopalladations, and a Suzuki‐type coupling.

     

Efficient four‐component synthesis of spiroindole derivatives catalysed by a versatile and reusable nano‐paramagnetic catalyst

A simple, efficient and environmentally benign route was developed for the preparation of spiro(indoline‐3,4‐pyrano[2,3‐c ]pyrazole) derivatives with good yields from condensation of isatins, malononitrile (or ethyl cyanoacetate), hydrazine hydrate and ethyl acetoacetate catalysed by PFu@Fe₃O₄ nanocomposite. The use of easily available catalyst, shorter reaction times, better yields, simplicity of reaction, heterogeneous system and easy work‐up are the advantages of the method presented. Characterization of the catalyst was performed using Fourier transform infrared spectroscopy, X‐ray diffraction and transmission electron microscopy.     

One‐pot synthesis of 3,4‐dihydropyridin‐2‐ones via tandem reaction of Blaise reaction intermediate and acrylic ester

An efficient method for the synthesis 3,4‐dihydropyridin‐2‐ones has been developed via tandem one‐pot Michael‐type addition and cyclization of the Blaise reaction intermediate and acrylic ester. A series of readily available nitriles, bromoacetic esters and acrylic esters have been employed to examine the scope of substrates for this method. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

Sn‐mediated one‐pot four‐component allylation of aldimines

A convenient and facile method for the synthesis of homoallylic amines was disclosed. The one‐pot reaction of aldehydes, aromatic amines and allylic bromide with tin powder at room temperature could afford the homoallylic amines in good to excellent yield without any promoter or additive. The method is highly efficient and environmentally benign with low cost and concise manipulation. Copyright © 2014 John Wiley & Sons, Ltd.     

Solvent‐free synthesis of 2H‐pyrans: One‐pot reactions of dithiocarbamates,alkyl propiolates,and isocyanides

A novel, convenient, and an efficient approach to the synthesis of 2H‐pyrans has been reported based on the multicomponent reaction. Solvent‐free condition for the reaction of dithiocarbamates, alkyl propiolates and isocyanides lead to the formation of 2H‐pyrans in good yields. In these reactions, synthesis of 2H‐pyrans is possible based on the one‐pot reaction and without using any catalyst. The mild reaction conditions and high yields of the products exhibit the good synthetic advantage of these methods. J. Heterocyclic Chem., lpar;2011).     

Novel Carbazole‐Based N‐Heterocyclic Carbene Ligands to Access Synthetically Relevant Stilbenes in Pd‐Catalyzed Coupling Processes

A series of new carbazole‐based N‐heterocyclic carbene (NHC) ligands have been synthesized in a simple and facile synthetic route and subsequently used in a Pd/carbazole‐based NHC catalytic system, which was found to be effective in catalyzing Heck reactions to provide substituted stilbene derivatives in good yields. Several bioactive stilbenes, including pterostilbene, pinosylvin, trimethoxy resveratrol, and resveratrol, were synthesized in good yields, and a 10 mmol scale‐up was also performed for trimethoxy resveratrol. The synthetic application was also extended by performing a double‐tandem chemoselective Heck reaction followed by Miyaura borylation in a one‐pot procedure to give single‐step access to synthetically useful stilbenyl boronate esters. Similarly, a unique triple‐tandem protocol of a chemoselective Heck reaction/Miyaura borylation/Suzuki–Miyaura coupling reaction sequence was performed for the one‐pot modification of biologically relevant molecules.     

Assembly of homoallylamine derivatives through iron‐catalyzed three‐component sulfonamidoallylation reaction

An efficient FeCl₃‐catalyzed three‐component reaction between aldehydes, sulfonamides and allylsilanes has been achieved, which provides a convenient, atom‐economic and green way to construct homoallylamine derivatives. In addition, this reaction exhibits excellent syn stereoselectivity with γ‐substituted allylsilanes.