Preparation of phosphorylated chitosan‐coated carbon microspheres as flame retardant and its application in unsaturated polyester resin

In this work, phosphorylated chitosan‐coated carbon microspheres (PCH@CMS) was successfully synthesized. Obtained PCH@CMS used as flame retardant was added into unsaturated polyester resin (UPR). Fourier infrared spectroscopy (FTIR) and X‐ray electron spectroscopy (XPS) results indicated that C═O, P─O, and P═O appeared on the surface of PCH@CMS. Compared with UPR, the residues of UPR/PCH@CMS‐10 at 800°C under nitrogen and air atmospheres increased by 9.0 and 3.9 wt%, respectively, and the peak heat release rate (pHRR) and the peak smoke release rate (pSPR) of UPR/PCH@CMS‐3 decreased by 18.9% and 23.5%, respectively. Limiting oxygen index (LOI), thermogravimetric analyzer (TG), and cone calorimeter test (CCT) results showed that the addition of PCH@CMS could enhance the flame retardancy and smoke suppression of the UPR composites. Moreover, the residues after CCT were characterized by scanning electron microscopy (SEM), XPS, and laser Raman spectroscopy (LRS). Based on the above results, the flame retardant mechanism of PCH@CMS was proposed. The carbon layer produced by the UPR/PCH@CMS composites was tortuous and could suppress the heat and pyrolysis product exchange with UPR matrix.     

The synergistic flame‐retardant effect of O‐MMT on the intumescent flame‐retardant PP/CA/APP systems

The flame retardancy of a novel intumescent flame‐retardant polypropylene (IFR‐PP) system, which was composed of a charring agent (CA), ammonium polyphosphate (APP), and polypropylene (PP), could be enhanced significantly by adding a small amount (1.0 wt%) of an organic montmorillonite (O‐MMT). The synergistic flame‐retardant effect was studied systematically. The thermal stability and combustion behavior of the flame‐retarded PP were also investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). TGA results demonstrated that the onset decomposition temperatures of IFR‐PP samples, with or without O‐MMT, were higher than that of neat PP. Compared with IFR‐PP, the LOI value of IFR‐PP containing 1.0 wt% O‐MMT was increased from 30.8 to 33.0, and the UL‐94 rating was also enhanced to V‐0 from V‐1 when the total loading of flame retardant was the same. The cone calorimeter results showed that the IFR‐PP with 1.0 wt% of O‐MMT had the lowest heat release rate (HRR), total heat release (THR), total smoke production (TSP), CO production (COP), CO₂ production (CO₂P), and mass loss (ML) of all the studied IFR‐PP samples, with or without O‐MMT. All these results indicated that O‐MMT had a significantly synergistic effect on the flame‐retardancy of IFR‐PP at a low content of O‐MMT. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of a novel polyphosphazene/triazine bi‐group flame retardant in situ doping nano zinc oxide and its application in poly (lactic acid) resin

A novel polyphosphazene/triazine bi‐group flame retardant in situ doping nano ZnO (A4‐d‐ZnO) was synthesized and applied in poly (lactic acid) (PLA). Fourier transform infrared (FTIR), solid state nuclear magnetic resonance (SSNMR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), transmission electron microscope (TEM), and energy dispersive spectrometer (EDS) were used to confirm the chemical structure of A4‐d‐ZnO. The thermal stability and the flame‐retardant properties of the PLA composites were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), limiting oxygen index (LOI), vertical burning test (UL‐94), and micro combustion calorimeter (MCC) test. The results of XPS showed that A4‐d‐ZnO has been synthesized, and the doping ratio of ZnO was 7.2% in flame‐retardant A4‐d‐ZnO. TGA results revealed that A4‐d‐ZnO had good char forming ability (40 wt% at 600°C). The results of LOI, vertical burning test, and MCC showed that PLA/5%A4‐d‐ZnO composite acquired a higher LOI value (24%), higher UL94 rating, and lower pk‐HRR (501 kW/m²) comparing with that of pure PLA. It indicated that a small amount of flame‐retardant A4‐d‐ZnO could achieve great flame‐retardant performance in PLA composites. The catalytic chain scission effect of A4‐d‐ZnO could make PLA composites drip with flame and go out during combustion, which was the reason for the good flame‐retardant property. Moreover, after the addition of A4‐d‐ZnO, the impaired mechanical properties of PLA composites are minimal enough.     

Synthesis of a novel phosphorus‐containing curing agent and its effects on the flame retardancy,thermal degradation and moisture resistance of epoxy resins

A novel phosphorus‐containing compound diphenyl‐(1, 2‐dicarboxylethyl)‐phosphine oxide defined as DPDCEPO was synthesized and used as a flame retardant curing agent for epoxy resins (EP). The chemical structure of the prepared DPDCEPO was well characterized by Fourier transform infrared spectroscopy, and ¹H, ¹³C and ³¹P nuclear magnetic resonance. The DPDCEPO was mixed with curing agent of phthalic anhydride (PA) with various weight ratios into epoxy resins to prepare flame retardant EP thermosets. The flame retardant properties, combustion behavior and thermal analysis of the EP thermosets were respectively investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), cone calorimeter measurement, dynamic mechanical thermal analysis and thermogravimetric analysis (TGA) tests. The surface morphologies and chemical compositions of the char residues for EP thermosets were respectively investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy (XPS). The water resistant properties of the cured EP were evaluated by putting the samples into distilled water at 70°C for 168 hr. The results revealed that the EP/20 wt% DPDCEPO/80 wt% PA thermosets successfully passed UL‐94 V‐0 flammability rating and the LOI value was as high as 33.2%. The cone test results revealed that the incorporation of DPDCEPO effectively reduced the combustion parameters of the epoxy resin thermosets, such as heat release rate and total heat release. The dynamic mechanical thermal analysis test demonstrated that the glass transition temperature (Tg) decreased with the increase of DPDCEPO content. The TGA results indicated that the incorporation of DPDCEPO promoted the decomposition of epoxy resin matrix ahead of time and led to a higher char yield and thermal stability at high temperatures. The surface morphological structures and analysis of the XPS of the char residues of EP thermosets revealed that the introduction of DPDCEPO benefited the formation of a sufficient, compact and homogeneous char layer with rich flame retardant elements on the epoxy resin material surface during combustion. The mechanical properties and water resistance of the cured epoxy resins were also measured. After water resistance tests, the EP/20 wt% DPDCEPO/80 wt% PA thermosets retained excellent flame retardancy, and the moisture adsorption of the EP thermosets decreased with the increase of DPDCEPO content in EP thermosets because of the existence of the P–C bonds and the rigid aromatic hydrophobic structure in DPDCEPO. Copyright © 2015 John Wiley & Sons, Ltd.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.     

Enhancement of a hyperbranched charring and foaming agent on flame retardancy of polyamide 6

A hyperbranched polyamine was prepared using an A₂ + B₃ approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR‐PA6 was investigated by limiting oxygen index (LOI), UL‐94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR‐PA6 could reach 36.5 with V‐0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR‐PA6 could still maintain V‐0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P‐O‐C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.     

Synergistic effects between a triazine-based charring agent and aluminum phosphinate on the intumescent flame retardance of thermoplastic polyether ester

The triazine-based charring agent (CFA) with perfect charring ability was synthesized and characterized. The synergistic effects between CFA and aluminum phosphinate (AlPi) on flame retardancy, thermal degradation, and flammability properties of thermoplastic polyester-ether elastomer (TPEE) were investigated by limiting oxygen index (LOI), vertical burning test (UL-94), cone calorimeter test (CCT), thermogravimetric analysis (TGA), laser Raman spectroscopy (LSR) and scanning electron microscopy (SEM). The results from UL-94 test showed that, by compounding 14 wt% AlPi and 4 wt% CFA with TPEE, the LOI value reached 28.5% and the UL-94 rating reached V-0 (1.6 mm). TGA results indicated that there is good synergistic charring ability between CFA and AlPi, especially the increased residues at high temperature (T > 700 °C). The CCT test results showed that CFA could change the combustion behavior of TPEE and effectively accelerate the formation of expanded carbon layers. The residues after combustion were measured by LRS and SEM, demonstrating that CFA can promote the formation of dense and stable carbon layers during the combustion, which could inhibit the melt dropping and improve the fire retardancy of TPEE composites. Thus, CFA was a promising synergistic agent in halogen-free flame retardant TPEE.     

Flammability characteristics and synergistic effect of hydrotalcite with microencapsulated red phosphorus in halogen-free flame retardant EVA composite

The flammability characteristics and synergistic effect of hydrotalcite with microencapsulated red phosphorus (MRP) in halogen-free flame retardant ethylene vinyl acetate (EVA) composite have been studied by cone calorimeter test (CCT), thermogravimetric analysis (TGA), limiting oxygen index (LOI) and UL-94 test. The results obtained by comparing the flame retardancy of hydrotalcite with magnesium hydroxide (MH) and aluminium hydroxide (AH) for their EVA composites showed that hydrotalcite has higher flame retardant effect than MH and AH at the same loading level. The CCT tests indicated that the heat release rate (HRR) and mass loss rate (MLR) of EVA composite blended with hydrotalcite greatly decreased compared with those blended with MH and AH. The LOI values of EVA/hydrotalcite composites are 3-4% higher than those of the corresponding MH composites at 40-60 wt% loading levels, and 6% higher than that of the corresponding AH composite at 40 wt% loading level. Moreover, the addition of a given amount of MRP apparently resulted in the increase of LOI value and decrease of the HRR and MLR as well the loading of hydrotalcite in EVA blend while keeping the V-0 rating in UL-94 test. However, the smoke release increased during the combustion of EVA/hydrotalcite blend containing MRP.     

A novel efficient halogen-free flame retardant system for polycarbonate

A novel silicon- and phosphorus-containing flame retardant, poly (9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide siloxane), P(DOPO-VTES) was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) and vinyltriethoxy silane(VTES). Its chemical structure was confirmed by FTIR. The thermal gravimetrical analysis (TGA) showed that P(DOPO-VTES) had good thermal stability and a high of char yield (86.31%) at 700 °C in nitrogen atmosphere. Its XRD patterns showed that this compound had a certain ordered structure. P(DOPO-VTES) was blended with polycarbonate (PC) together with montmorillonite(MMT) to prepare a series of organic-inorganic hybrids of flame retardant (PC)/P(DOPO-VTES)/MMT via melt blending. The thermal degradation behavior and flame retardancy of those hybrids were investigated with TGA, limiting oxygen index (LOI), vertical burning test (UL-94), and cone calorimeter. The LOI value of the flame-retardant PC systems could reach a maximal value of 32.8 when the content of P(DOPO-VTES) was 5 wt%. When 2 wt% MMT was added into the PC/5%P(DOPO-VTES) system, the UL-94 rating reached V-0. The possible flame retardant mode of MMT was studied via the dynamic rheological properties of the systems and the morphology of the chars remaining after the LOI test and the cone calorimeter test.     

Flame‐retardancy and anti‐dripping effects of intumescent flame retardant incorporating montmorillonite on poly(lactic acid)

In the present study, the effects of intumescent flame retardant (IFR) incorporating organically modified montmorillonite (O‐MMT) on the flame retardancy and melt stability of PLA were investigated. The flame‐retardant PLA was prepared using a twin‐screw extruder and a two roll mill. Then, the influence of IFR and MMT on flame retardancy and melt stability was thoroughly investigated by means of limiting oxygen index (LOI), vertical burning test, thermogravimetric analysis, scanning electronic microscopy, melt flow index (MFI), and parallel plate rheological experiments. The experimental results show that the IFR system in combination with MMT has excellent fire retardancy, i.e. the sample could achieve a UL94 V‐0 rating and LOI value increases from 20.1 for pristine PLA to 27.5 for the flame‐retarded PLA. MFI and rheological measurement indicate that O‐MMT significantly enhances the melt stability and suppresses the melt dripping. Copyright © 2009 John Wiley & Sons, Ltd.     

Roles of organic intercalation agent with flame retardant groups in montmorillonite (MMT) in properties of polypropylene composites

Three kinds of organic intercalation agent containing flame retardant groups, melamine (MA), triphenylphonium (TPP) chloride, and tetradecyl trihexyl phosphonium (TTP) bromide were intercalated into montmorillonite (MMT) via cation exchange reactions. These modified MMTs are combined with intumescent systems and compounded with PP. The flame retardant and thermal properties of the PP composites are studied. The organic intercalation agents in the layers of MMT play important roles in the char formation and flame retardant properties of PP composites. MA shows a better performance in limiting oxygen index (LOI) value and TPP helps to increase UL‐94 properties, whereas TTP maintains or deteriorates the flame retardancy of polypropylene/intumescent flame retardant (IFR) composites. The LOI and UL‐94 properties increase firstly and then decrease as the content of MMT increases. The MA acts as a blowing agent and emits an inert gas to provide migration impetus, which results in a better intumescent structured and stronger char to endure heat erosion. Although TPP and TTP emit combustible gas that burn, especially for TTP as it has a more flammable aliphatic chain. The synergistic effect between MA‐MMT and IFR is better than that for TPP‐MMT and TTP‐MMT. Copyright © 2014 John Wiley & Sons, Ltd.     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.     

Synergistic effects between iron–graphene and melamine salt of pentaerythritol phosphate on flame retardant thermoplastic polyurethane

A comparison of melamine salt of pentaerythritol phosphate (MPP), and a synergistic agents, iron–graphene (IG) was performed in thermoplastic polyurethane (TPU) by masterbatch‐melt blending on thermal and flame retardant properties. The flame retardant properties of TPU composites were characterized by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT). The CCT results revealed that IG can significantly enhance flame retardant properties of MPP in TPU. The peak heat release rate of neat TPU and flame retardant TPU/MPP composites decreased from 2192.6 and 226.7 to 187.2 kW/m² compared with that of TPU containing 0.25 wt% IG. The thermal stability and thermal decomposition of TPU composites were characterized by thermogravimetric analysis (TGA) and thermogravimetric/Fourier infrared spectrum analysis (TG‐IR). The results indicated IG and MPP can improve the thermal stability of TPU. The formation of thermal conductive network by IG can promote the decomposition of MPP into nonflammable melt, which can play the role of heat barrier and restrict the diffusion of fuels into combustion zone and access of oxygen to the unburned fuels. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene

A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.     

Great enhancement of efficiency of intumescent flame retardants by titanate coupling agent and polysiloxane

Modified intumescent flame retardants (MIFRs) and polysiloxane (APID) have been used in combination to enhance the flame retardancy of polypropylene (PP). The IFR system was composed of melamine (MEL), ammonium polyphosphate (APP) and pentaerythritol (PER). Aimed to improve the thermal stability of the IFR and its dispersivity in PP, titanate coupling agent NDZ‐201 was used to modify the IFRs via ball milling. MIFRs and APID have a cooperative effect on the flame retardant properties of PP. With 25 wt.% of MIFR and APID, the flame retardant sample (PPMA) was rated V0 for UL‐94, the LOI value was 34.3%, and the peak heat release rate (PHRR) was reduced by 80% in cone calorimeter test. In addition, APID could improve the compatibility of MIFR with the PP matrix, thereby increasing the mechanical properties of PP blends. The flame retardant effect of APID and MIFR in PP was presented in the condensed phase resulting in a rigid, thermally stable and expanded carbon layer due to different char structures.     

Organically modified montmorillonite as a synergist for intumescent flame retardant against the flammable polypropylene

Low flame retardant efficiency is a key bottleneck for currently available retardants against the flammable polypropylene (PP). Herein, the organically modified montmorillonite (OMMT) was utilized as a synergist for our previously reported intumescent flame retardant (IFR) that was constructed from ammonium polyphosphate (APP) and hyperbranched charring foaming agent (HCFA) to further enhance the retardant efficiency against PP. The resultant's combustion behavior was thoroughly investigated by cone calorimetry, limiting oxygen index (LOI), vertical burning test (UL‐94), and scanning electron microscopy (SEM). The results showed that 20% addition of IFR with OMMT showed a positive effect and improved the flame retardancy of the PP systems. Especially, addition of 2 wt% OMMT obviously increased the LOI values of PP systems with 20% total loading flame retardants from 29% to 31.5% and the samples meet V‐0 rating as well as the reduction of the heat release rate (HRR), total heat release (THR), CO₂, and CO production occurred. On the other hand, the SEM images were also revealed that OMMT initiated a dense and strong char on the surface of the material, which resulted in efficient flame retardancy of PP matrix during combustion. In addition, thermal degradation behavior discussed by thermogravimetric analysis (TGA) indicated that OMMT could improve the thermal stability of PP systems under high temperature, and promoted char residues of PP/IFR systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence of Fe‐MMT on the fire retarding behavior and mechanical property of (ethylene‐vinyl acetate copolymer/magnesium hydroxide) composite

In this work, Fe‐montmorillonite (Fe‐MMT) is synthesized and used as a synergistic agent in ethylene vinyl acetate/magnesium hydroxide (EVA/MH) flame retardant formulations. The synergistic effect of Fe‐MMT with magnesium hydroxide (MH) as the halogen‐free flame retardant for ethylene vinyl acetate (EVA) is studied by thermogravimetric analysis (TGA), limiting the oxygen index (LOI), UL‐94, and cone calorimetry test. Compared with that of Na‐MMT, it indicates that the synergistic effects of Fe‐MMT enhance the LOI value of EVA/MH polymer and improve the thermal stability and reduce the heat release rate (HRR). The structure and morphology of nanocomposites are studied by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The mechanical properties of the EVA composites have also been studied here, indicating that the use of Fe‐MMT reduces the amount of inorganic fillers. MH hence enhances the mechanical properties of the EVA composite while keeping the UL‐94 V‐0 rating. Copyright © 2008 John Wiley & Sons, Ltd.     

Metal‐organic framework MIL‐53 (Fe)@C/graphite carbon nitride hybrids with enhanced thermal stability,flame retardancy,and smoke suppression for unsaturated polyester resin

Metal‐organic framework MIL‐53 (Fe)@C/graphite carbon nitride hybrid (MFeCN), a novel flame retardant, was synthesized by hydrothermal reaction and subsequently added into unsaturated polyester resin (UPR). The structure, morphology, and thermal stability of MFeCN were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), and thermogravimetric analysis (TG). The thermal stability and flammability of the UPR composites were characterized by TG and cone calorimeter tests (CCT). The results of CCT demonstrated that the peak heat release rate (pHRR), total heat release (THR), peak smoke production rate (pSPR), and total smoke production (TSP) of UPR/MFeCN‐4 were reduced by 39.8%, 10.2%, 33.3%, and 14.5%, respectively, comparing with UPR. The results of TG and CCT indicated that MFeCN could improve the thermal stability, flame retardancy, and smoke suppression properties of the UPR composites. The residues after CCT were then characterized by laser Raman spectroscopy (LRS), XPS, and SEM. Finally, based on the above experimental results and analysis, the flame retardancy mechanism of MFeCN was proposed.     

Supramolecular self‐assembly modification of ammonium polyphosphate and its flame retardant application in polypropylene

In order to improve its water resistance and compatibility with polymer matrix, ammonium polyphosphate (APP) is modified with melamine‐trimesic acid (MEL‐TA) aggregates by supramolecular self‐assembly technology. Chemical structure and morphology of APP@MEL‐TA are investigated by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM), respectively. Intumescent flame retardant system of APP@MEL‐TA and charring‐foaming agent is introduced into polypropylene (PP) matrix. The flammability and combustion behavior of PP composites are investigated by limiting oxygen index (LOI), UL‐94 vertical burning, and cone calorimetry tests. In terms of LOI values and cone combustion results, APP@MEL‐TA performs better than pristine APP. Char residue of PP composites is investigated by SEM and Raman spectra. Flame retardant mechanisms are proposed based on thermal decomposition, combustion results, and analysis on char residue.     

Synthesis of functionalized α-zirconium phosphate modified with intumescent flame retardant and its application in poly(lactic acid)

A novel functionalized α-zirconium phosphate (F-ZrP) modified with intumescent flame retardant was synthesized by co-precipitation method and characterized. Poly (lactic acid) (PLA)/F-ZrP nanocomposites were prepared by melt blending method. The thermal stability and combustion behavior of PLA/F-ZrP nanocomposites were investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL-94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). The results showed that the addition of flame retardant F-ZrP slightly affect PLA's thermal stability, but significantly improve the flame retardancy of PLA composites. In comparison with neat PLA, the LOI value of PLA/F-ZrP was increased from 19.0 to 26.5, and the UL-94 rating was enhanced to V-0 as the loading of F-ZrP at 10%. SEM results suggested the introduction of F-ZrP in the PLA system can form compact intumescent char layer during burning. All these results showed that the F-ZrP performed good flame retardancy for PLA.