H3PO4/(CF3CO)2O Mediated Acylation Followed by Hurd–Mori Reaction: Synthesis of Novel 1,2,3‐Thiadiazol Derivatives

The synthesis of novel 1,2,3‐thiadiazol derivatives containing 2H‐benzo[b][1,4]oxazin‐3(4H)‐one moiety as one of the substituents has been reported. A combined application of H₃PO₄/(CF₃CO)₂O mediated acylation followed by Hurd–Mori reaction has been explored to synthesize these compounds. The scope and limitation of this strategy along with the reaction mechanism of the key step is discussed.     

Highly reusable support‐free copper(II) complex of para‐hydroxy‐substituted salen: Novel,efficient and versatile catalyst for C─N bond forming reactions

An air‐stable, highly active and versatile method for C─N bond forming reactions is reported. Under mild conditions using a highly reusable support‐free Cu(II)–salen complex, structurally diverse N ‐aryl‐substituted compounds were obtained via direct C─N bond forming reaction of HN‐heterocycles with aryl iodides or three‐component C─N bond forming reaction of 2‐bromobenzaldehyde, aniline derivatives and sodium azide in good to excellent yields. C─N bond forming reaction for benzimidazole derivatives was also performed in the presence of the catalyst under ambient conditions. A series of hybrid benzimidazoles bearing morpholine, tetrazole and quinoxaline backbones were produced using this method. All reactions were performed in short times under air. The Cu(II) catalyst could be reused up to eight times in the direct cross‐coupling reaction of 9H –carbazole with iodobenzene without any decrease in its catalytic activity.     

Synthesis and characterization of some new 1,2,3-thiadiazole and 1,2,3-selenadiazole triterpene derivatives from allobetulone and 2-oxoallobetulin

Abstract

The synthesis of new 1,2,3-thiadiazole and 1,2,3-selenadiazole derivatives from triterpenoid ketones has been investigated via the corresponding semicarbazones. The intermediates 5, 8 have also been isolated, separated and their structures identified. The Hurd–Mori reaction and Lalezari method have been applied to synthesize a series of new substances 6 and 7. The regioselectivity of the functionalization mostly was centered at the C-3 position for the products 9 and 10. The structures of these compounds were confirmed by 2D-NMR spectroscopy.     

One‐Pot Synthesis of 3‐Substituted 3,4‐Dihydro‐1,2,3‐benzotriazine Derivatives Based on the Reaction of o‐Bromobenzyl Azides with Butyllithium

An efficient one‐pot procedure for the preparation of 3‐substituted 3,4‐dihydro‐1,2,3‐benzotriazines 2, 3 , and 4 from o‐bromobenzyl azides 1 is described. The reaction of these azides with BuLi in THF at ?78° generates o‐lithiobenzyl azides via the Br/Li exchange. These lithium compounds immediately undergo intramolecular cyclization to give the corresponding (dihydro‐1,2,3‐benzotriazinyl)lithium intermediates, which are trapped with a variety of acylating agents or BnBr at N(3) exclusively to provide the desired products in moderate to good yields.     

Synthesis of phosphonyl 1,2,3‐thiadiazoles

In accord with the Hurd‐Mori reaction conditions, 1‐ or 2‐phosphonyl hydrazones reacted with thionyl chloride to afford 4‐ or 5‐phosphonyl 1,2,3‐thiadiazoles in good yields and purity. A synthesis of 1‐ or 2‐phosphonyl hydrazones using two methods is described. © 2000 John Wiley & Sons, Inc. Heteroatom Chem 16:413–416, 2000     

One‐Pot Syntheses of 2‐(2‐Sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic Acid Derivatives via Reactions of 3‐(2‐Isothiocyanatophenyl)prop‐2‐enoic Acid Derivatives with Thiols or Sodium Sulfide

Two efficient methods for the preparation of 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 3 under mild conditions have been developed. The first method is based on the reaction of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoates 1a – 1c with thiols in the presence of Et₃N in THF at room temperature, leading to the corresponding dithiocarbamate intermediates 2 , which underwent spontaneous cyclization at the same temperature by an attack of the S‐atom at the prop‐2‐enoyl moiety in a 1,4‐addition manner (Michael addition) to give 2‐(2‐sulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetates in one pot. The second method involves treatment of 3‐(2‐isothiocyanatophenyl)prop‐2‐enoic acid derivatives 1b – 1d with Na₂S leading to the formation of 2‐(2‐sodiosulfanyl‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid intermediates 5 by a similar addition/cyclization sequence, which are then allowed to react with alkyl or aryl halides to afford derivatives 3 . 2‐(2‐Thioxo‐4H‐3,1‐benzothiazin‐4‐yl)acetic acid derivatives 6 can be obtained by omitting the addition of halides.     

Synthesis and Reactions of Pyrido[2,1‐a]isoquinolin‐4‐yl Formimidate Derivatives and Antimicrobial Activities of Isolated Products

Treatment of arylidene malononitriles 2A – C with 1‐cyanomethylisoquinoline 1 afforded 4‐amino‐2‐arylpyrido[2,1‐a ]isoquinoline‐1,3‐dicarbonitrile derivatives 5A – C , which converted to formimidates 6A – C via reaction with triethylorthoformate. Treatment of the latter compounds with hydrazine hydrate gave the corresponding amino–imino compounds 7A – C , which underwent Dimroth rearrangement to afford 13‐aryl‐1‐hydrazinylpyrimido[5′,4′:5,6]pyrido[2,1‐a ]isoquinoline‐12‐carbonitrile 8A – C . The latter reacted with aldehyde to give 9a – i . Oxidative cyclization of the latter compounds 9a – i gave [1,2,4]triazolo[4″,3″:1′,6′]‐pyrimido[5′,4′:5,6]pyrido[2,1‐a ]isoquinolines 10a , d , g . Such compounds isomerized to the thermodynamically more stable isomers [1,2,4]triazolo[1″,5″:1′,6′]pyrimido[5′,4′:5,6]‐pyrido[2,1‐a ]isoquinolines 11a , d , g . Antimicrobial activities for some compounds were studied.     

Radical Cyclization Reactions via Manganese(III) Acetate Leading to 2‐Thienyl‐Substituted Dihydrofuran Compounds

The 2‐thienyl‐substituted 4,5‐dihydrofuran derivatives 3 – 8 were obtained by the radical cyclization reaction of 1,3‐dicarbonyl compounds 1a – 1f with 2‐thienyl‐substituted conjugated alkenes 2a – 2e by using [Mn(OAc)₃] (Tables 1–5). In this study, reactions of 1,3‐dicarbonyl compounds 1a – 1e with alkenes 2a – 2c gave 4,5‐dihydrofuran derivatives 3 – 5 in high yields (Tables 1–3). Also the cyclic alkenes 2d and 2e gave the dihydrobenzofuran compounds, i.e., 6 and 7 in good yields (Table 4). Interestingly, the reaction of benzoylacetone (=1‐phenylbutane‐1,3‐dione; 1f ) with some alkenes gave two products due to generation of two stable carbocation intermediates (Table 5).     

Selenium‐Containing Heterocycles from Isoselenocyanates: Synthesis of 1,2,3‐Selenadiazole Derivatives

The reaction of aroyl chlorides 1 with KSeCN and ethyl diazoacetate ( 6 ) in acetone at room temperature yields ethyl 2‐aroyl‐5‐(aroylimino)‐2,5‐dihydro‐1,2,3‐selenadiazole‐4‐carboxylates 7 (Scheme 3). A reaction mechanism via the initial formation of the corresponding aroyl isoselenocyanates 2 followed by a 1,3‐dipolar cycloaddition of the diazo compound with the C=Se bond to give ethyl 5‐(aroylimino)‐4,5‐dihydro‐1,2,3‐selenadiazole‐4‐carboxylates of type D is proposed. Acylation of the latter at N(2) leads to the final products 7 . Deacetylation of 7 to give ethyl 5‐(aroylimino)‐1,2,3‐selenadiazole‐4‐carboxylates 10 is achieved by treatment of 7 with morpholine (Scheme 5). The intermediate isoselenocyanates 2 partially oligomerize to give two different oligomers. The symmetrical one reacts with morpholine to yield selenourea derivatives 12 (Scheme 6).     

1,4-PENTADIEN-3-ONES. A SOURCE FOR SELENANO 1,2,3- SELENA AND THIADIAZOLES

The 4-Selenanols (2,3) and 4-selenanones (4) were obtained by the reaction of 1,4-pentadien-3-ones (1) with sodium hydrogen selenide under different conditions. The fused 1,2,3-selenadiazoles (6) and 1,2,3-thiadiazoles (7) were prepared from 4 on oxidative cyclization with SeO₂ and Hurd–Mori reaction with SOCl₂.     

Synthesis and Antimicrobial Activity of 2‐(4‐(Hydroxyalkyl)‐1H‐1,2,3‐triazol‐1‐yl)‐N‐substituted propanamides

A series of 21 2‐(4‐(hydroxyalkyl)‐1H ‐1,2,3‐triazol‐1‐yl)‐N ‐substituted propanamides (1,4‐disubstituted 1,2,3‐triazoles having amide linkage and hydroxyl group) have been synthesized from click reaction between terminal alkyne and 2‐azido‐N ‐substituted propanamide (generated in situ from reaction of 2‐bromo‐N ‐substituted propanamide and sodium azide) and characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and HRMS. All the newly synthesized triazoles were tested in vitro for antimicrobial activity against four bacterial cultures – Escherichia coli , Enterobacter aerogenes , Klebsiella pneumoniae , and Staphylococcus aureus – and two fungal cultures – Candida albicans and Aspergillus niger . The synthesized 1,4‐disubstituted 1,2,3‐triazoles displayed moderate to good antimicrobial potential against the tested strains.     

Synthesis of Novel 3‐Acetyl‐2‐Aryl‐5‐(3‐Aryl‐1‐Phenyl‐Pyrazol‐4‐yl)‐2,3‐Dihydro‐1,3,4‐Oxadiazoles

A series of novel pyrazolyl‐substituted 1,3,4‐oxadiazole derivatives ( 4a‐4o ) were prepared by cyclization of the intermediate N′‐((3‐aryl‐l‐phenyl‐pyrazol‐4‐yl)methylene)arylhydrazide with acetic anhydride. The structures of the new compounds were confirmed by IR, ¹H NMR, MS and elemental analysis. Furthermore, preliminary bioassay of some of the title compounds indicated that they exhibited moderate inhibition against HIV‐1 PR.     

Chemie freier,cyclischer vicinaler Tricarbonyl‐Verbindungen (`1,2,3‐Trione'), Teil 1, Reaktionsweise von Diazomethan und seinen Derivaten mit 5,5‐Dimethylcyclohexan‐1,2,3‐trion (=`Oxo‐dimedon') und verwandten Cyclohexan‐1,2,3‐trionen

Chemistry of Free Cyclic Vicinal Tricarbonyl Compounds (`1,2,3‐Triones'). Part 1. Reaction of Diazomethane and Its Derivatives with 5,5‐Dimethylcyclohexane‐1,2,3‐trione (=`Oxo‐dimedone') and Related Cyclohexane‐1,2,3‐triones Interactions of diazomethane and of its derivatives as typical nucleophiles with cyclic 1,2,3‐triones as efficient electrophiles lead to different results: a) formation of oxiranes (C,O insertion under loss of N₂), b) nucleophilic addition yielding diazoaldols, c) formation of ring‐enlargement products (C,C insertion under loss of N₂), and d) formation of dioxoles via redox reactions (under loss of N₂). Our results and those of other groups allow us to recognize that the unexpected outcome of the reaction of oxodimedone and several related species is due to a closed‐shell diazoaldol formation followed by an open‐shell redox reaction leading to dioxoles.     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Synthesis and Antibacterial Activity of Some New 2,5‐Disubstituted‐1,3,4‐oxadiazole Derivatives

Synthesis of some new oxadiazole derivatives starting from 1,2,3-benzo[d]triazole-1-acetic hydrazide (1) is described. The target compounds 2-(N-substituted-aminocarbonylmethylthio)-5-(1,2,3-benzo[d]triazol-1-ylmethyl)- 1,3,4-oxadiazole (4a—4i) and 2-[2-(N-substituted-aminocarbonyl)ethylthio]-5-(1,2,3-benzo[d]triazol-1-ylmethyl)- 1,3,4-oxadiazole (5a—5i) were obtained in good yields via cyclisation of 1 and subjected to antibacterial activity test against pathogenic bacteria. The halogen containing mono- and di-substituted derivatives showed excellent antibacterial activity compared to other analogues.     

Chemie freier cyclischer vicinaler Tricarbonyl‐Verbindungen (‘1,2,3‐Trione’). Teil 3

Chemistry of Free Cyclic Vicinal Tricarbonyl Compounds (‘1,2,3‐Triones’). Part 3. Polar and Redox Reactions of 1,2,3‐Triones with Enamines of Different Types – News on Oxonol Dyes, Radicals, and Biradicals The central C?O groups of cyclic 1,2,3‐triones possess outstanding electrophilic (electron‐pair‐accepting) as well as oxidizing (one‐electron‐accepting) properties. Thus, 1,2,3‐triones are chemically related to 1,2‐ and 1,4‐benzoquinones. Whereas polar reactions with carbanion‐like (electron rich) species give rise to nucleophilic addition reactions to C?O groups under exclusive C,C‐bond formation, SET (single‐electron transfer) or redox reactions effect a partial ‘carbonyl Umpolung’ via ketyl intermediates (C,C‐ and/or C,O‐bond formation). Here, we report on numerous reactions between electron‐rich, more‐ or less‐polar enamines with 5,5‐dimethylcyclohexane‐1,2,3‐trione ( 9a ) and 1H‐indene‐1,2,3‐trione ( 9b ). Various new derivatives of basic oxonol dyes were formed, including the first oxonol dye incorporating a 1,3‐dioxocyclohexyl moiety. A novel stable radical, 50 / 50′ , was obtained from 9b and 11a via addition, hydrolysis, and treatment with conc. H₂SO₄. Radical 50 / 50′ represents a vinylogous ‘monodehydroreductone’ and is, thus, related to monodehydroascorbic acid ( 143 ), to Russell's radical cation ( 144 ), to indigo ( 141 / 141′ ), and to quinhydrone.     

Synthesis of Novel Isoindolo[2,1‐a]quinazolinedione Derivatives Containing a 1,2,3‐Triazole Ring System

A synthesis of isoindolo[2,1‐a]quinazolinedione derivatives, coupled with a 1,2,3‐triazole ring system, via the reaction of isatoic anhydride, HC?CCH₂NH₂, and 2‐formylbenzoic acid is described, which led to the formation of the isoindolo[2,1‐a]quinazoline‐5,11‐dione scaffold having a C?C bond that participated in a click reaction with various organic azides.     

Synthesis of ethyl 4-(1,2,3-thiadiazol-4-yl)-5-(bromomethyl)furan-2-carboxylate and its reactions with nucleophiles

By cyclization of carboethoxyhydrazone of ethyl 4-acetyl-5-methylfuran-2-carboxylate under the conditions of Hurd–Mori reaction ethyl 4-(1,2,3-thiadiazol-4-yl)-5-methylfuran-2-carboxylate was synthesized. The ester obtained was brominated with N-bromosuccinimide at the methyl group in the furan ring. This bromide reacts with various N-, S-, O-, and P-nucleophiles to form the corresponding substitution products. Furylthiadiazole fragment remains stable in the course of these transformations.     

New many fold 1,2,3‐selenadiazole aromatic derivatives

The many fold aromatic ketones 2a‐d are versatile compounds for the synthesis of the many fold 1,2,3‐selenadiazole aromatic derivatives 5a‐d . The preparation starts with the reaction between the many fold bromomethylene benzene derivatives 1a‐d and 4‐hydroxyacetophenone, which are transformed through the reaction with semicarbazide hydrochloride or ethylhydrazine carboxylate into the corresponding semicarbazones derivatives 3a‐d or hydrazones 4a‐d . The reaction with selenium dioxide leads to regiospecific ring closure of semicarbazones or hydrazones to give the many fold 1,2,3‐selenadiazole aromatic derivatives in high yield.     

Synthesis of (±)‐Glaucine and (±)‐Neospirodienone via an One‐Pot Bischler?Napieralski Reaction and Oxidative Coupling by a Hypervalent Iodine Reagent

Condensation of 3,4‐dimethoxybenzeneethanamine ( 3d ) and various benzeneacetic acids, i.e., 4a – e , via a practical and efficient one‐pot Bischler–Napieralski reaction, followed by NaBH₄ reduction, produced a series of 1‐benzyl‐1,2,3,4‐tetrahydroisoquinolines, i.e., 5a – e , in satisfactory yields (Scheme 3). Oxidative coupling of the N‐acyl and N‐methyl derivatives 6a – e of the latter with hypervalent iodine ([IPh(CF₃COO)₂]) yielded products with two different skeletons (Scheme 4). The major products from N‐acyl derivatives 6a – c were (±)‐N‐acylneospirodienones 2a – c , while the minor was the 3,4‐dihydroisoquinoline 7 . (±)‐Glaucine ( 1 ), however, was the major product starting from N‐methyl derivative 6e . Possible reaction mechanisms for the formation of these two types of skeleton are proposed (Scheme 5).