Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

A Simple Multistep Conversion of 1,2‐Dihydro‐1,1‐dimethoxynaphthalen‐2‐ones to (3,4‐Dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates

On irradiation (λ=350 nm) in the presence of 1,1‐dimethoxyethene, naphthalene‐1,2‐dionemonoacetals 1 regioselectively afford 1,1,4,4‐tetramethoxycyclobuta[a]naphthalen‐3‐ones 3 . Sequential deprotection of these bis‐acetals first lead to 1,1‐dimethoxycyclobuta[a]naphthalene‐3,4‐diones 4 and then to cyclobuta[a]naphthalene‐1,3,4‐triones 6 , which, in turn, are converted into (3,4‐dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates 7 by treatment with SiO₂/MeOH/air.     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Report on an Unusual Cascade Reaction between Azulenes and 2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐Dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ)

The oxidation of 1‐(3,8‐dimethylazulen‐1‐yl)alkan‐1‐ones 1 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (=4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile; DDQ) in acetone/H₂O mixtures at room temperature does not only lead to the corresponding azulene‐1‐carboxaldehydes 2 but also, in small amounts, to three further products (Tables 1 and 2). The structures of the additional products 3 – 5 were solved spectroscopically, and that of 3a also by an X‐ray crystal‐structure analysis (Fig. 1). It is demonstrated that the bis(azulenylmethyl)‐substituted DDQ derivatives 5 yield on methanolysis or hydrolysis precursors, which in a cascade of reactions rearrange under loss of HCl into the pentacyclic compounds 3 (Schemes 4 and 7). The found 1,1′‐[carbonylbis(8‐methylazulene‐3,1‐diyl)]bis[ethanones] 4 are the result of further oxidation of the azulene‐1‐carboxaldehydes 2 to the corresponding azulene‐1‐carboxylic acids (Schemes 9 and 10).     

Synthesis of 2‐Coumarinyl and Spiroindolyl‐5‐Phenyl‐1,3,4‐Oxadiazoles

The 2H‐1‐benzo/naphthopyran‐2‐one‐4‐yl (un)substituted phenyl‐1,3,4‐oxadiazoles has been synthesized by the oxidative cyclization of benzoic acid hydrazides formed in situ by the condensation of the respective 2H‐1‐benzo/naphthopyran‐2‐one‐4‐carboxaldehyde and (un)substituted monobenzoyl hydrazide in moderate yields. Also, spiro[indoline‐thiozolidine]‐2,4′‐diones has been syhthesized in a similar way from 3‐phenyl‐spiro[3H‐indoline‐3,2′‐thiozolidine]‐2,4′‐(1 H)dione monohydrazide and (un)substituted benzaldehydes.     

Synthesis and properties of fluorinated polyimides based on 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene and various aromatic dianhydrides

A novel fluorinated diamine monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐2,5‐di‐tert‐butylbenzene ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 2,5‐di‐tert‐butylhydroquinone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Fluorinated polyimides ( 5a – 5f ) were synthesized from diamine 2 and various aromatic dianhydrides ( 3a – 3f ) via thermal or chemical imidization. These polymers had inherent viscosities of 0.77–1.01 dL/g. The 5 series polyimides were soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, and N,N‐dimethylformamide and were even soluble in dioxane, tetrahydrofuran, and dichloromethane. 5 (C) showed cutoff wavelengths between 363 and 404 nm and yellowness index (b*) values of 6.5–40.2. The polyimide films had tensile strengths of 93–114 MPa, elongations to break of 9–12%, and initial moduli of 1.7–2.1 GPa. The glass‐transition temperatures were 255–288 °C. The temperatures of 10% weight loss were all above 460 °C in air or nitrogen atmospheres. In comparison with a nonfluorinated polyimide series based on 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene, the 5 series showed better solubility and lower color intensity, dielectric constants, and moisture absorption. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2272–2284, 2004     

Synthesis and Fungicidal Activity of (E)‐5‐[1‐(2‐Oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐4‐one Derivatives

The novel fungicidal agents, (E )‐5‐[1‐(2‐oxo‐1‐oxaspiro[4,5]dec/non‐3‐en‐3‐yl)ethylidene]‐2‐aminoimidazolin‐ 4‐one derivatives, were designed and synthesized in moderate to excellent yields in four steps using α ‐hydroxyketone and diketene as raw materials and characterized by HR‐ESI‐MS , ¹H NMR and X‐ray diffraction. The preliminary bioassay showed that some of these compounds, such as 5e , 6a , 6e , and 7 h exhibit 87.8%, 91.3%, 89.9% and 87.8% inhibition rates against Sclerotinia scleotiorum , 3b , 3c , 4c and 7 h exhibit 96.4%, 92.5%, 90.3% and 76.9% inhibition rates against Phytophthora capsici at the concentration of 50 µg/mL , respectively. These compounds exhibited significant fungicidal activities against S. scleotiorum and P. capsici with EC₅₀ values of 2.56–11.60 µg/mL , and compounds 6e and 7 h exhibited weak inhibition against the spore germination of S. scleotiorum , while the spore germination of P. capsici was strongly inhibited by compound 7 h solution. Scanning electron microscopy (SEM ) and transmission electron microscopy (TEM ) observation indicated that compound 7 h had a significant impact on the structure and function of the hyphal cell wall of P. capsici mycelium.     

The Structures of Indazolin‐3‐one (=1,2‐Dihydro‐3H‐indazol‐3‐one) and 7‐Nitroindazolin‐3‐one

The existence of polymorphism in parent indazolin‐3‐one (=1,2‐dihydro‐3H‐indazol‐3‐one; 1 ) is reported as well as an X‐ray and NMR CPMAS study establishing that its 7‐nitro derivative 2 exists as the 3‐hydroxy tautomer. Absolute shieldings calculated at the GIAO/B3LYP/6‐311++G(d,p) level were used to determine the tautomeric oxo/hydroxy equilibrium in solution, i.e., always the 1H‐indazol‐3‐ol tautomer predominates.     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

X‐Ray Structure Analyses of syn/anti‐Conformers of N‐Furfuroyl‐, N‐Benzoyl‐, and N‐Picolinoyl‐Substituted (2R)‐Bornane‐10,2‐sultam Derivatives

The synthesis and the X‐ray structure of the three new N‐(arylcarbonyl)‐substituted derivatives 2a – 2c of (2R)‐bornane‐10,2‐sultam are presented and discussed. Direct comparison of the solid‐state analyses shows that the dipole‐directed SO₂/C?O anti‐/syn‐conformations may be very sensitive to weak electronic/electrostatic repulsions of the heteroatom lone pairs. The optimum interactions are reached when the lone pair of the β‐positioned heteroatom is oriented in the O(3)?C(11)? N(1) plane. Such rare syn‐conformations may be observed with at least up to 1.8 kcal/mol higher energy as compared to their ground states. Additionally, these anti/syn‐conformations are also very sensitive to external influences such as, for example, the crystal‐packing forces.     

Alternative Synthesis of 2‐Hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one

The 2‐hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one ( 1 ) was synthesized in 42% yield by rearrangement of epoxy ketone 10 on treatment with BF₃⋅Et₂O under anhydrous conditions. Intermediate 10 was available from the known enone 8 , either via direct epoxidation (60% H₂O₂, NaOH, MeOH; yield 50%), or via reduction to the corresponding allylic alcohol 14 (LiAlH₄, THF), followed by epoxidation ([VO(acac)₂], ^tBuOOH) and reoxidation under Swern conditions, in 37% total yield.     

Competitive Molecular‐/Ion‐Recognition Responsive Characteristics of Poly(N‐isopropylacrylamide‐co‐benzo‐12‐crown‐4‐acrylamide) Copolymers with Benzo‐12‐crown‐4 as Both Guest and Host Units

Novel dual molecular‐ and ion‐recognition responsive poly(N‐isopropylacrylamide‐co‐benzo‐12‐crown‐4‐acrylamide) (PNB₁₂C₄) linear copolymers with benzo‐12‐crown‐4 (B12C4) as both guest and host units are prepared. The copolymers exhibit highly selective sensitivities toward γ‐cyclodextrin (γ‐CD) and Na⁺. The presence of γ‐CD induces the lower critical solution temperature (LCST) of PNB₁₂C₄ copolymer to shift to a higher value due to the formation of 1:1 γ‐CD/B12C4 host‐guest inclusion complexes, while Na⁺ causes a negative shift in LCST due to the formation of 2:1 “sandwich” B12C4/Na⁺ host‐guest complexes. Regardless of the complexation order, when γ‐CD and Na⁺ coexist with PNB₁₂C₄, competitive complexation actions of B12C4 as both guest and host units toward γ‐CD and Na⁺ finally form equilibrium 2:2:1 γ‐CD/B12C4/Na⁺ composite complexes, and the final LCST values of PNB₁₂C₄ copolymer reach almost the same level. The results provide valuable guidance for designing and applying PNB₁₂C₄‐based smart materials in various applications.

     

In situ green synthesis of Cu‐Ni bimetallic nanoparticles supported on reduced graphene oxide as an effective and recyclable catalyst for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles

In the present work, for the first time we have designed a novel approach for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles using reduced graphene oxide (rGO) decorated with Cu‐Ni bimetallic nanoparticles (NPs). In situ synthesis of Cu/Ni/rGO nanocomposite was performed by a cost efficient, surfactant‐free and environmentally benign method using Crataegus azarolus var. aronia L. leaf extract as a stabilizing and reducing agent. Phytochemicals present in the extract can be used to reduce Cu²⁺ and Ni²⁺ ions and GO to Cu NPs, Ni NPs and rGO, respectively. Analyses by means of FT‐IR, UV–Vis, EDS, TEM, FESEM, XRD and elemental mapping confirmed the Cu/Ni/rGO formation and also FT‐IR, NMR, and mass spectroscopy as well as elemental analysis were used to characterize the tetrazoles. The Cu/Ni/rGO nanocomposite showed the superior catalytic activity for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles within a short reaction time and high yields. Furthermore, this protocol eliminates the need to handle HN₃.     

A Novel Route to 1‐Substituted 3‐(Dialkylamino)‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles

Heptalenecarbaldehydes 1 / 1′ as well as aromatic aldehydes react with 3‐(dicyanomethylidene)‐indan‐1‐one in boiling EtOH and in the presence of secondary amines to yield 3‐(dialkylamino)‐1,2‐dihydro‐9‐oxo‐9H‐indeno[2,1‐c]pyridine‐4‐carbonitriles (Schemes 2 and 4, and Fig. 1). The 1,2‐dihydro forms can be dehydrogenated easily with KMnO₄ in acetone at 0° (Scheme 3) or chloranil (=2,3,5,6‐tetrachlorocyclohexa‐2,5‐diene‐1,4‐dione) in a ‘one‐pot’ reaction in dioxane at ambient temperature (Table 1). The structures of the indeno[2,1‐c]pyridine‐4‐carbonitriles 5′ and 6a have been verified by X‐ray crystal‐structure analyses (Fig. 2 and 4). The inherent merocyanine system of the dihydro forms results in a broad absorption band in the range of 515–530 nm in their UV/VIS spectra (Table 2 and Fig. 3). The dehydrogenated compounds 5, 5′ , and 7a – 7f exhibit their longest‐wavelength absorption maximum at ca. 380 nm (Table 2). In contrast to 5 and 5′, 7a – 7f in solution exhibit a blue‐green fluorescence with emission bands at around 460 and 480 nm (Table 4 and Fig. 5).     

Two‐Step Synthesis of 1,3‐Disubstituted 3,4‐Dihydro‐4‐thioxoquinazolin‐2(1H)‐ones from 1‐Bromo‐2‐fluorobenzenes

An efficient synthesis of 3‐alkyl‐3,4‐dihydro‐4‐thioxobenzoquinazolin‐2(1H)‐ones 3 has been accomplished in two steps and in satisfactory yields from 1‐bromo‐2‐fluorobenzenes 1 . Thus, the reaction of 1‐fluoro‐2‐lithiobenzenes, generated by the Br/Li exchange between 1 and BuLi, with alkyl isothiocyanates, gives N‐alkyl‐2‐fluorobenzothioamides 2 , which, in turn, react with a series of isocyanates in the presence of NaH to give the desired products 3 .     

Preparation of Well‐Defined Poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] Diblock Copolymers by Water‐Based Atom Transfer Radical Polymerization

Summary: Well‐defined poly[(ethylene oxide)‐block‐(sodium 2‐acrylamido‐2‐methyl‐1‐propane sulfonate)] diblock copolymers [P(EO_m‐b‐AMPS_n)], have been obtained by water‐based ATRP using α‐methoxy‐ω‐(2‐methylbromoisobutyrate) poly(ethylene oxide)s (MeO‐P[EO]_m‐BrⁱB with m ranging from 12 to 113) and CuBr · 2Bpy (Bpy for 2,2′‐bipyridyl) as macroinitiator and catalytic complex, respectively. Compared to direct polymerization in water, it has been demonstrated that the water/methanol (3:1, v/v) mixture is better suited for predicting the final number‐average molar mass from the initial monomer‐to‐macroinitiator molar ratio and achieving a quite narrow polydispersity, even at high monomer conversion ( ≈ 1.4 at 80% conversion). The effect of temperature, solvent mixture composition and addition of NaCl salt on the polymerization rate and extent of control over the copolymer molecular parameters have been highlighted as well.

     

One‐Pot Synthesis of 4‐(2,3‐Dihydro‐2‐hydroxy‐1,3‐dioxo‐1H‐inden‐2‐yl)‐Substituted 1‐Aryl‐1H‐pyrazole‐3‐carboxylates via a Tandem Three‐Component Reaction

The hitherto unreported, highly functionalized 1H‐pyrazole‐3‐carboxylates 3 have been synthesized in good yields via a one‐pot three‐component domino reaction of phenylhydrazines, dialkyl acetylenedicarboxylates, and ninhydrin under mild conditions for the first time. No co‐catalyst or activator is required for this multicomponent reaction, and the reaction is, from an experimental point of view, simple to perform (Scheme 1). The structures of compounds 3 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization/addition reaction is proposed (Scheme 2).     

Simultaneous determination of 9‐dehydro‐17‐hydro‐andrographolide and sodium 9‐dehydro‐17‐hydro‐andrographolide‐19‐yl sulfate in rat plasma by UHPLC‐ESI‐MS/MS after administration of xiyanping injection: application to a pharmacokinetic study

9‐Dehydro‐17‐hydro‐andrographolide (DHA) and sodium 9‐dehydro‐17‐hydro‐andrographolide‐19‐yl sulfate (DHAS) are active ingredients of xiyanping injection in clinical use. A simple, rapid and sensitive UHPLC‐ESI‐MS/MS method was developed for the determination of DHA and DHAS in rat plasma, and the pharmacokinetics of DHA and DHAS after intravenous administration of xiyanping injection was investigated. The plasma samples were treated with methanol to precipitate out protein, and the separation of DHA and DHAS was achieved on a Waters BEH C₁₈ column with a mobile phase consisting of acetonitrile and 10 mmol/L ammonium acetate solution at a flow rate of 0.4 mL/min. DHA, DHAS and the internal standard (internal standard, IS) diethylstilbestrol were detected at negative ion mode. The precursor‐product ion pairs used in multiple reaction monitoring mode were: m/z 349.1 → 286.9 (DHA), m/z 428.9 → 96.0 (DHAS) and m/z 267.1 → 236.9 (IS). Calibration curves offered satisfactory linearity within the test range, and all correlation coefficients were >0.995. The lower limit of detection of DHA and DHAS in plasma samples were determined to be 0.1 ng/mL. The lower limit of quantitation was 0.5 ng/mL for DHA and DHAS. All the recoveries of the quality control samples were in the range of 86.0–102.4%. The ratios of matrix effect were between 89.2 and 105.1%. The method was fully validated and successfully applied to the pharmacokinetic study of DHA and DHAS in rats. The study showed that both DHA and DHAS were distributed and eliminated rapidly in rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Enantiomerically Pure cis‐ and trans‐3‐Fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐Oxides as γ‐Homoacetylcholine Mimetics and Inhibitors of Acetylcholinesterase

The title compounds, the P(3)‐axially and P(3)‐equatorially substituted cis‐ and trans‐configured 8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphadecalin 3‐oxides (=8‐benzyl‐3‐fluoro‐2,4‐dioxa‐8‐aza‐3‐phosphabicyclo[4.4.0]decane 3‐oxides=2‐fluorohexahydro‐6‐(phenylmethyl)‐4H‐1,3,2‐dioxaphosphorino[5,4‐c]pyridine 2‐oxides) were prepared (ee>98%) and fully characterized (Schemes 2 and 3). The absolute configurations were established from that of their precursors, the enantiomerically pure cis‐ and trans‐1‐benzyl‐4‐hydroxypiperidine‐3‐methanols which were unambiguously assigned. Being configuratively fixed and conformationally constrained phosphorus analogues of acetyl γ‐homocholine (=3‐(acetyloxy)‐N,N,N‐trimethylpropan‐1‐aminium), they are suitable probes for the investigation of molecular interactions with acetylcholinesterase. As determined by kinetic methods, all of the compounds are weak inhibitors of the enzyme.     

New Approaches to the Synthesis of 4‐(2‐Aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones and 3‐Ureidoindoles and a Study of Their Interconversion

3‐Alkyl/aryl‐3‐ureido‐1H,3H‐quinoline‐2,4‐diones ( 2 ) and 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) react in boiling concentrated HCl to give 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ). The same compounds were prepared by the same procedure from 2‐alkyl/aryl‐3‐ureido‐1H‐indoles ( 4 ), which were obtained from the reaction of 3‐alkyl/aryl‐3‐aminoquinoline‐2,4(1H,3H)‐diones ( 1 ) with 1,3‐diphenylurea or by the transformation of 3a‐alkyl/aryl‐9b‐hydroxy‐3,3a,5,9b‐tetrahydro‐1H‐imidazo[4,5‐c]quinoline‐2,4‐diones ( 3 ) and 5‐alkyl/aryl‐4‐(2‐aminophenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ones ( 6 ) in boiling AcOH. The latter were converted into 1,3‐bis[2‐(2‐oxo‐2,3‐dihydro‐1H‐imidazol‐4‐yl)phenyl]ureas ( 5 ) by treatment with triphosgene. All compounds were characterized by ¹H‐ and ¹³C‐NMR and IR spectroscopy, as well as atmospheric pressure chemical‐ionisation mass spectra.