Fiber‐reinforced composite hydrogels for bioadhesive and sealant applications

The use of bioadhesives and sealants for wound closure and healing applications is becoming more and more popular, particularly when other techniques, such as stapling or suturing, are impractical or inefficient. Loading adhesives with fibers has tremendous potential for improving their mechanical properties. The concept of fiber‐reinforced bioadhesives and sealants is novel and has not been investigated to date. In the present study, natural cellulose fibers were selected for enhancement of bioadhesive properties. A bioadhesive formulation based on a combination of gelatin and alginate crosslinked with water‐soluble carbodiimide was used as a generic formulation for this study, on the basis of our previous studies. The polymeric matrix and the cellulose fibers showed high affinity, which resulted in a dramatic increase in the viscosity and in the burst strength. They moderately affected the curing time, swelling, and weight loss. A mixed response was found in the compression modulus and the bonding strength in lap shear. We demonstrated that fiber‐reinforced bioadhesives have a great potential for surgical sealant applications because of improvement in the cohesive strength of the composite hydrogel. This study presents proof of the concept of using fibers for the enhancement of bioadhesive properties as a result of fiber‐reinforcement and may comprise the basis for future studies in this field. Copyright © 2017 John Wiley & Sons, Ltd.     

Polymer composition and substrate influences on the adhesive bonding of a biomimetic, cross-linking polymer

Hierarchical biological materials such as bone, sea shells, and marine bioadhesives are providing inspiration for the assembly of synthetic molecules into complex structures. The adhesive system of marine mussels has been the focus of much attention in recent years. Several catechol-containing polymers are being developed to mimic the cross-linking of proteins containing 3,4-dihydroxyphenylalanine (DOPA) used by shellfish for sticking to rocks. Many of these biomimetic polymer systems have been shown to form surface coatings or hydrogels; however, bulk adhesion is demonstrated less often. Developing adhesives requires addressing design issues including finding a good balance between cohesive and adhesive bonding interactions. Despite the growing number of mussel-mimicking polymers, there has been little effort to generate structure-property relations and gain insights on what chemical traits give rise to the best glues. In this report, we examine the simplest of these biomimetic polymers, poly[(3,4-dihydroxystyrene)-co-styrene]. Pendant catechol groups (i.e., 3,4-dihydroxystyrene) are distributed throughout a polystyrene backbone. Several polymer derivatives were prepared, each with a different 3,4-dihyroxystyrene content. Bulk adhesion testing showed where the optimal middle ground of cohesive and adhesive bonding resides. Adhesive performance was benchmarked against commercial glues as well as the genuine material produced by live mussels. In the best case, bonding was similar to that obtained with cyanoacrylate "Krazy Glue". Performance was also examined using low- (e.g., plastics) and high-energy (e.g., metals, wood) surfaces. The adhesive bonding of poly[(3,4-dihydroxystyrene)-co-styrene] may be the strongest of reported mussel protein mimics. These insights should help us to design future biomimetic systems, thereby bringing us closer to development of bone cements, dental composites, and surgical glues.     

A Moldable Nanocomposite Hydrogel Composed of a Mussel‐Inspired Polymer and a Nanosilicate as a Fit‐to‐Shape Tissue Sealant

The engineering of bioadhesives to bind and conform to the complex contour of tissue surfaces remains a challenge. We have developed a novel moldable nanocomposite hydrogel by combining dopamine‐modified poly(ethylene glycol) and the nanosilicate Laponite, without the use of cytotoxic oxidants. The hydrogel transitioned from a reversibly cross‐linked network formed by dopamine–Laponite interfacial interactions to a covalently cross‐linked network through the slow autoxidation and cross‐linking of catechol moieties. Initially, the hydrogel could be remolded to different shapes, could recover from large strain deformation, and could be injected through a syringe to adhere to the convex contour of a tissue surface. With time, the hydrogel solidified to adopt the new shape and sealed defects on the tissue. This fit‐to‐shape sealant has potential in sealing tissues with non‐flat geometries, such as a sutured anastomosis.     

Nano/Biomimetic Tissue Adhesives Development: From Research to Clinical Application

Wound closure and healing have been a problem that humans have faced since the ancient eras. An appropriate tissue connector must hold the edges of injured tissues close together to support healing and also prevent the leakage of biological fluids when resisting against the tensile forces. Even though clinical usage of mechanical methods is convenient for wound closure, their application has some limitations and drawbacks such as being painful for patients and hard to apply for surgeons when the injured site is not in touch. Furthermore, they do not have desirable cosmetic results. To solve these problems, closing the wounds with sticky materials has been introduced to prevent bleeding and induce the wound healing process. To this regard, many types of surgical adhesives including tissue adhesives have been developed to be a suitable alternative for sutures and staples. There is also a new approach which aims at producing bioadhesives by mimicking the nature along with applying nanotechnology methods. Today, many studies have been done to develop new adhesives inspired by nature. We have attempted to introduce the fundamentals of wound healing along with the different types of bioadhesives, their properties, and clinical applications in a simple and illustrated comprehensive way.     

Recent Advances on the Development of Protein-Based Adhesives for Wood Composite Materials—A Review

The industrial market depends intensely on wood-based composites for buildings, furniture, and construction, involving significant developments in wood glues since 80% of wood-based products use adhesives. Although biobased glues have been used for many years, notably proteins, they were replaced by synthetic ones at the beginning of the 20th century, mainly due to their better moisture resistance. Currently, most wood adhesives are based on petroleum-derived products, especially formaldehyde resins commonly used in the particleboard industry due to their high adhesive performance. However, formaldehyde has been subjected to strong regulation, and projections aim for further restrictions within wood-based panels from the European market, due to its harmful emissions. From this perspective, concerns about environmental footprint and the toxicity of these formulations have prompted researchers to re-investigate the utilization of biobased materials to formulate safer alternatives. In this regard, proteins have sparked a new and growing interest in the potential development of industrial adhesives for wood due to their advantages, such as lower toxicity, renewable sourcing, and reduced environmental footprint. This work presents the recent developments in the use of proteins to formulate new wood adhesives. Herein, it includes the historical development of wood adhesives, adhesion mechanism, and the current hotspots and recent progress of potential proteinaceous feedstock resources for adhesive preparation.     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

Nano‐Graphene Oxide Based Multichannel Sensor Arrays towards Sensing of Protein Mixtures

Optical array‐based sensors are attractive candidates for the detection of various bio‐analytes due to their convenient fabrication and measurements. For array‐based sensors, multichannel arrays are more advantageous and used frequently in many electronic sensors. But most reported optically array based sensors are constructed on a single channel array. This difficulty is mainly instigated from the overlap in optical responses. In this report we have used nano‐graphene oxide (nGO) and suitable fluorophores as sensor elements to construct a multichannel sensor array for the detection of protein analytes. By using the optimized multichannel array we are able to detect different proteins and mixtures of proteins with 100 % classification accuracy at sub‐nanomolar concentration. This modified method expedites the sensing analysis as well as minimizes the use of both analyte and sensor elements in array‐based protein sensing. We have also used this system for the single channel array‐based sensing to compare the sensitivity and the efficacy of these two systems for other applications. This work demonstrated an intrinsic trade‐off associated with these two methods which may be necessary to balance for array‐based analyte detections.     

Amorphous Silk Fibroin Nanofiber Hydrogels with Enhanced Mechanical Properties

Silk fibroin (SF) hydrogels have been engineered as universal substrates for various tissue regenerations and drug delivery. Although different physical and chemical crosslinking strategies are developed to form SF hydrogels with suitable performances, a significant gap remains to match specific requirements of various tissues. Here, amorphous SF nanofibers with more tyrosine residues outside the surfaces are used to replace traditional SF. Under the same crosslinking conditions, the use of amorphous SF nanofibers results in tougher properties, four times higher stiffness than that from traditional SF solutions. Unlike previous SF hydrogels, the SF nanofiber hydrogels show high tunability in wide modulus range of 0.6–160 kPa under low SF concentrations (below 5 wt%), showing improved mechanical match with various soft tissues. Better stability and cytocompatibility are also achieved, further confirming the superiority of the hydrogels as the tissue substrates. Therefore, a feasible strategy is developed to optimize the performances of SF hydrogel via tuning the nano‐structural state in aqueous solutions, which will enrich SF‐based hydrogel family in future.     

Self‐Assembling Proteins for Design of Anticancer Nanodrugs

Inspired by the diverse protein‐based structures and materials in organisms, proteins have been expected as promising biological components for constructing nanomaterials toward various applications. In numerous studies protein‐based nanomaterials have been constructed with the merits of abundant bioactivity and good biocompatibility. However, self‐assembly of proteins as a dominant approach in constructing anticancer nanodrugs has not been reviewed. Here, we provide a comprehensive account of the role of protein self‐assembly in fabrication, regulation, and application of anticancer nanodrugs. The supramolecular strategies, building blocks, and molecular interactions of protein self‐assembly as well as the properties, functions, and applications of the resulting nanodrugs are discussed. The applications in chemotherapy, radiotherapy, photodynamic therapy, photothermal therapy, gene therapy, and combination therapy are included. Especially, manipulation of molecular interactions for realizing cancer‐specific response and cancer theranostics are emphasized. By expounding the impact of molecular interactions on therapeutic activity, rational design of highly efficient protein‐based nanodrugs for precision anticancer therapy can be envisioned. Also, the challenges and perspectives in constructing nanodrugs based on protein self‐assembly are presented to advance clinical translation of protein‐based nanodrugs and next‐generation nanomedicine.     

Combining a hydrogel and an electrochemical biosensor to determine the extent of degradation of paper artworks

Paper-based artworks are among the most valuable assets for transmission of knowledge. Historical paper is composed of different polysaccharides (e.g. cellulose), binders, and glues. During aging all of these components undergo several degradation processes, as a result of external and intrinsic causes, and these can compromise the state of conservation of the document. In this work, application of a new biotechnological strategy for paper artefact preservation is reported. By making use of innovative and non-invasive materials, for example appropriate hydrogels, in combination with selective electrochemical biosensors, it is possible to simultaneously verify the degradation condition of the paper artwork and then to efficiently clean it, while monitoring the process of removal of both pollution and degradation products. In this paper, we focus on specific examples in which such techniques have been applied to paper artworks and that illustrate the advantages and potential of this biotechnology compared with the traditional paper-cleaning methods currently in use.     

Polymers for tissue engineering,medical devices,and regenerative medicine. Concise general review of recent studies

Recently investigated applications of polymeric materials for tissue engineering, regenerative medicine, implants, stents, and medical devices are described in the present review. Papers published during the last 2 years about polymeric materials used for preparation of various polymeric scaffolds, methods of fabrication of such scaffolds and their effectiveness in providing support for cell growth and development into various tissues and enhancing or mimicking an extracellular network (ECM's) have been cited. Papers describing the use of such polymeric materials for tissue engineering of cartilage and bones were cited. The exciting developments in the field of regenerative medicine, based on application of the self‐assembled biocompatible polymeric scaffolds for regeneration of tissues and organs are described in some detail. The use of the biocompatible and biodegradable collapsible polymeric stents, as well as the use of biocompatible, but not necessarily biodegradable polymeric materials for protective coatings of metallic stents and reservoirs of drugs, preventing restenosis and other post‐operative complications that may occur after insertion of a stent, have been reviewed. Clinical results pointing out the advantages of such treatments, as well as results indicating their limitations, have been cited. New formulas, for coating implants, stents, and other medical devices, have been discussed. Copyright © 2006 John Wiley & Sons, Ltd.     

Identification of drying oils in mixtures of natural binding media used for artistic and historic works by capillary electrophoresis

To characterise the technologies and to find the appropriate treatments, the identification of the binding media of artistic and historic objects is of high importance for the restorer and conservator. Often applied together with other binders, in the present paper, the applicability of a CZE method was ascertained for the identification of the constituents of drying oils in mixtures with animal glues and/or plant gums. The drying oils are identified after alkaline hydrolysis due to their content of long‐chain saturated and unsaturated fatty acids (palmitic, stearic, oleic, linoleic, linolenic) and shorter‐chain dicarboxylic acids (pimelic, suberic, azelaic, sebacic). The dicarboxylic acids occur as products of the unsaturated acids by oxidative degradation during the drying process. The possible interferences in CE caused by the other binders are amino acids and/or monosaccharides. Such interferences could be expected as indirect UV detection has to be used, which is highly unspecific. It was found that none of the constituents of the animal glues or plant gums migrate in the time window of the analytes, thus not obstructing the identification of the analytes in any of the oil mixtures with one binder, or with a combination of both. No interference is observed even in excess of the glues. The method was applied for the identification of a drying oil in a paint layer from a ceremonial mask originating from Papua New Guinea. There is evidence that the oil is most probably from candlenut tree (Aleurites moluccana).     

A magnetic bead‐based serum proteomic fingerprinting method for parallel analytical analysis and micropreparative purification

ProteinChip surface‐enhanced laser desorption/ionization technology and magnetic beads‐based ClinProt system are commonly used for semi‐quantitative profiling of plasma proteome in biomarker discovery. Unfortunately, the proteins/peptides detected by MS are non‐recoverable. To obtain the protein identity of a MS peak, additional time‐consuming and material‐consuming purification steps have to be done. In this study, we developed a magnetic beads‐based proteomic fingerprinting method that allowed semi‐quantitative proteomic profiling and micropreparative purification of the profiled proteins in parallel. The use of different chromatographic magnetic beads allowed us to obtain different proteomic profiles, which were comparable to those obtained by the ProteinChip surface‐enhanced laser desorption/ionization technology. Our assays were semi‐quantitative. The normalized peak intensity was proportional to concentration measured by immunoassay. Both intra‐assay and inter‐assay coefficients of variation of the normalized peak intensities were in the range of 4–30%. Our method only required 2 μL of serum or plasma for generating enough proteins for semi‐quantitative profiling by MALDI‐TOF‐MS as well as for gel electrophoresis and subsequent protein identification. The protein peaks and corresponding gel spots could be easily matched by comparing their intensities and masses. Because of its high efficiency and reproducibility, our method has great potentials in clinical research, especially in biomarker discovery.     

A strategy for extending the applicability of a validated plasma calibration curve to quantitative measurements in multiple tissue homogenate samples: a case study from a rat tissue distribution study of JI-101, a triple kinase inhibitor

A general practice in bioanalysis is that, whatever the biological matrix the analyte is being quantified in, the validation is performed in the same matrix as per regulatory guidelines. In this paper, we are presenting the applicability of a validated LC‐MS/MS method in rat plasma for JI‐101, to estimate the concentrations of JI‐101 in various tissues that were harvested in a rat tissue distribution study. A simple protein precipitation technique was used to extract JI‐101 and internal standard from the tissue homogenates. The recovery of JI‐101 in all the matrices was found to be >70%. Chromatographic separation was achieved using a binary gradient using mobile phase A (acetonitrile) and B (0.2% formic acid in water) at a flow rate of 0.30 mL/min on a Prodigy ODS column with a total run time of 4.0 min. The MS/MS ion transitions monitored were 466.1 → 265 for JI‐101 and 180.1 → 110.1 for internal standard. The linearity range was 5.02–4017 ng/mL. The JI‐101 levels were quantifiable in the various tissue samples harvested in this study. Therefore, the use of a previously validated JI‐101 assay in plasma circumvented the tedious process of method development/validation in various tissue matrices. Copyright © 2011 John Wiley & Sons, Ltd.     

Phosphodiester Hydrogels for Cell Scaffolding and Drug Release Applications

Given the major structural role phosphodiesters play in the organism it is surprising they have not been more widely adopted as a building block in sophisticated biomimetic hydrogels and other biomaterials. The potential benefits are substantial: phosphoester‐based materials show excellent compatibility with blood, cells, and a remarkable resistance to protein adsorption that may trigger a foreign‐body response. In this work, a novel class of phosphodiester‐based ionic hydrogels is presented which are crosslinked via a phosphodiester moiety. The material shows good compatibility with blood, supports the growth and proliferation of tissue and presents opportunities for use as a drug release matrix as shown with fluorescent model compounds. The final gel is produced via base‐induced elimination from a phosphotriester precursor, which is made by the free‐radical polymerization of a phosphotriester crosslinker. This crosslinker is easily synthesized via multigram one‐pot procedures out of common laboratory chemicals. Via the addition of various comonomers the properties of the final gel may be tuned leading to a wide range of novel applications for this exciting class of materials.     

Recent Advances of Carbon Nanotubes‐based Electrochemical Immunosensors for the Detection of Protein Cancer Biomarkers

An efficient electrochemical immunosensor can offer the potential for the detection of protein cancer biomarkers due to its high sensitivity, low cost and possible integration in compact analytical devices. In the last several years, researchers have developed various electrochemical immunoassay methods for the detection of protein cancer biomarkers. Significant progresses have been made in the study of electrochemical immunosensor that based on CNTs, especially in the fields of clinical screening and diagnosis of cancer field. This is because CNTs possess unique structural, mechanical and electronic properties that can decrease over‐potential and improve the sensitivity of electrochemical immunosensor. This paper reviews recent advances in the different modified strategies of constructing electrochemical immunosensor based on CNTs for detecting protein cancer biomarkers. CNTs or CNTs hybrid nanomaterials modified electrodes have been firstly introduced as the sensing platforms for the detection of protein cancer biomarkers. On the other hand, CNTs or functional CNTs used as labels in sandwich‐type electrochemical immunosensors have been systematically summarized. These novel strategies and the general principles could increase the sensitivity of the immunosensor, thereby overcoming the limitations of its application in the biosensing field.     

Evaluation of mass spectrometric data using principal component analysis for determination of the effects of organic lakes on protein binder identification

Matrix‐assisted laser desorption/ionisation–time of flight (MALDI‐TOF) mass spectrometry is commonly used for the identification of proteinaceous binders and their mixtures in artworks. The determination of protein binders is based on a comparison between the m/z values of tryptic peptides in the unknown sample and a reference one (egg, casein, animal glues etc.), but this method has greater potential to study changes due to ageing and the influence of organic/inorganic components on protein identification. However, it is necessary to then carry out statistical evaluation on the obtained data. Before now, it has been complicated to routinely convert the mass spectrometric data into a statistical programme, to extract and match the appropriate peaks. Only several ‘homemade’ computer programmes without user‐friendly interfaces are available for these purposes. In this paper, we would like to present our completely new, publically available, non‐commercial software, ms‐alone and multiMS‐toolbox, for principal component analyses of MALDI‐TOF MS data for R software, and their application to the study of the influence of heterogeneous matrices (organic lakes) for protein identification. Using this new software, we determined the main factors that influence the protein analyses of artificially aged model mixtures of organic lakes and fish glue, prepared according to historical recipes that were used for book illumination, using MALDI‐TOF peptide mass mapping. Copyright © 2015 John Wiley & Sons, Ltd.     

Biopolymers for surface engineering of paper-based products

The combination of biopolymer science and technology with surface engineering of paper-based cellulosic materials has a lot of potential in stepping forward to a sustainable future. Various biopolymers such as oxidized starch, carboxymethyl cellulose, and polylatic acid have been commercially used to engineer paper surface. The paper-based cellulosic products are widely used for printing/writing and packaging applications. However, the production of these products are currently dependent mainly upon the use of petroleum-based materials including synthetic pigment coating latexes and barrier coating materials. The major challenges associated with some biopolymers are their relatively high costs and unsatisfactory performances. Continuing efforts are being made to enable the increased and value-added use of various biopolymers in paper surface engineering. These polymers can be based on cellulose, hemicelluloses, chitosan, alginate, protein, polylactic acid, and polyhydroxyalkanoate. The biopolymer-engineered paper products can be tailored for use as substitutes for various non-renewable materials including plastics and metals as well. Future development in the area of biopolymers for paper surface engineering is likely to lead to new possibilities and breakthroughs, paving the way for a substantially sustainable and green future.     

Specificity of metal ion cross-linking in marine mussel adhesives

In an effort to understand the formation of marine bioadhesives, mussel protein extracts were cured with various reagents and the enhanced cross-linking ability of Fe3+ was found.