A new cardo bisphenol monomer containing pendant azido group and the resulting aromatic polyesters

Expanding on our strategy to synthesize aromatic step‐growth polymers containing pendant clickable azido groups via functional monomer approach, we have now designed and synthesized a new cardo bisphenol, viz., 2‐(2‐azidoethyl)‐3, 3‐bis(4‐hydroxyphenyl) isoindolin‐1‐one (PPH‐N₃). PPH‐N₃ was conveniently synthesized starting from commercially available phenolphthalein by a three‐step route in an overall yield of 65% using simple organic transformations. Aromatic (co)polyesters bearing pendant azido groups were synthesized by low‐temperature solution polycondensation of PPH‐N₃ or different molar ratios of PPH‐N₃ and bisphenol‐A (BPA) with aromatic diacid chlorides in dry dichloromethane in the presence of triethylamine (TEA) as a base. The formation of medium to reasonably high‐molecular‐weight (co)polyesters was evidenced from intrinsic viscosity and number‐average molecular‐weight measurements that were in the range 0.52–0.85 dL/g and 16,700–28,200, respectively. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polyesters. (Co)polyesters were characterized using FTIR, ¹H NMR, ¹³C NMR spectroscopy, XRD, and TGA. The thermal curing reaction of (co)polyesters involving decomposition of azido groups was studied by DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using catalyst‐free azide‐maleimide cycloaddition reaction with two maleimides, namely, N‐methylmaleimide and N‐hexylmaleimide. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1516–1526     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

Preparation and properties of polyesters and copolyesters based on 4-methyl-2,4-bis (p-hydroxyphenyl)-1-pentene

4-Methyl-2,4-bis (p-hydroxyphenyl)-1-pentene (MBHPP) was prepared from thermal cracking of bisphenol A (BPA). Unsaturated polyesters were synthesized from the polycondensation of MBHPP with diacid chlorides. Three synthetic routes—solution, interfacial, and melt polycondensation—were employed. MBHPP-polyesters with higher molecular weights were obtained by the interfacial polycondensation reaction. During the preparation of MBHPP-polysters, the products usually contain some insoluble gel, which is probably caused by the crosslinking reaction of the vinyl groups of MBHPP in the aqueous NaOH. Thus, a modified interfacial polycondensation method was proposed, in which both of the bisphenol MBHPP and diacid chloride were dissolved in organic phase and then the solution was stirred with an aqueous NaOH solution to promote the polycondensation. This method reduced the time of MBHPP present in the alkali and produced polymers with higher inherent viscosity and lower gel fraction. The effects of some variables, such as the nature of porganic solvents and phase transfer agents and the concentration of reactants, on the modified interfacial polycondensation of MBHPP with the mixture of equal parts of isophthaloyl and terephthaloyl chloride [IPC/TPC (50/50)] were investigated in some detail. Copolyesters of mixed bisphenols of BPA/MBHPP with IPC/TPC (50/50) were also prepared and characterized.     

Synthesis,thermal, rheological characteristics,and enzymatic degradation of aliphatic polyesters with lignin‐based aromatic pendant groups

This research aims to produce lignin‐based biodegradable polyesters with improved thermal quality. A series of aliphatic polyesters with lignin‐based aromatic side groups were synthesized by conventional melt‐polycondensation. Decent molecular weight (21–64 kg mol^?1) was achieved for the polymerizations. The molecular structures and thermal and mechanical properties of the obtained polyesters were characterized. As a result, the obtained polyesters are all amorphous, and their glass‐transition temperature (T_g) depends on the size of the pendant aromatic group (31–51 °C). Furthermore, according to the TGA results, the thermal decomposition temperatures of the polyesters are all above 390 °C, which make them superior compared with commercial biodegradable polyesters like polylactic acid or polyhydroxyalkanoates. Finally, rheological characteristics and enzymatic degradation of the obtained polyesters were also measured. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2314–2323     

Soluble aromatic polyamides modified by incorporation of 1,2,4-triazole and pentadecyl units into the backbone of polymer

Abstract

A new series of soluble aromatic polyamides was synthesized by low temperature solution polycondensation of novel aromatic diamine namely 3,5-bis-(4′-amino phenyl)-4-(4″-methoxy-2″-pentadecyl phenyl) 1,2,4-triazole (VII) with aromatic diacid chlorides, viz. isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). The aromaticdiamine (VII) was characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C), and mass spectrometry. Copolyamides were also synthesized by employing various mole proportions of IPC and TPC with diamine (VII). Inherent viscosities of these polyamides were in the range of 0.50–0.65 dL/g in DMAc, indicating formation of moderate to high molecular weight of polyamides. These polyamides showed good solubility in polar aprotic solvents such as N,N-Dimethyl acetamide (DMAc), N-Methyl 2-pyrrolidone (NMP), N, N, Dimethyl formamide (DMF), and Dimethyl sulphoxide (DMSO), which may be due to incorporation of pendant methoxyphenyl moiety with pentadecyl units. The amorphous morphology of polyamides as evidenced by XRD. These polyamides had lower glass transition temperatures; as determined by DSC, compared to the T_g of conventional aromatic polyamides due to internal plasticization effect of long alkyl pentadecyl group. Polymers showed good thermal stability, with initial decomposition temperature above 300?°C.     

Stable and Rapid Thiol Bioconjugation by Light‐Triggered Thiomaleimide Ring Hydrolysis

Maleimide‐mediated thiol‐specific derivatization of biomolecules is one of the most efficacious bioconjugation approaches currently available. Alarmingly, however, recent work demonstrates that the resulting thiomaleimide conjugates are susceptible to breakdown via thiol exchange reactions. Herein, we report a new class of maleimides, namely o ‐CH₂NHⁱ Pr phenyl maleimides, that undergo unprecedentedly rapid ring hydrolysis after thiol conjugation to form stable thiol exchange‐resistant conjugates. Furthermore, we overcome the problem of low shelf lives of maleimide reagents owing to their propensity to undergo ring hydrolysis prior to bioconjugation by developing a photocaged version of this scaffold that resists ring hydrolysis. UV irradiation of thiol bioconjugates formed with this photocaged maleimide unleashes rapid thiomaleimide ring hydrolysis to yield the desired stable conjugates within 1 h under gentle, ice‐cold conditions.     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Synthesis and Characterization of New Unsaturated Polyesters Containing 4‐Phenylcyclohexanone Moiety in the Main Chain

Two series of new unsaturated polyesters were prepared from 2,6‐bis(p‐hydroxidebenzylidene)‐4‐phenylcyclohexanone (I) and 2,6‐divanillyidene‐4‐phenylcyclohexanone (II) with adipoyl, isophthaloyl, sebacoyl and terephthaloyl dichlorides utilizing the interfacial polycondensation technique at ambient temperature. In addition to that, the model compounds were synthesized by reacting (I) and (II) with benzoyl chloride. The model compound and polyester samples have been characterized by elemental and spectral analyses. The unsaturated polyesters have inherent viscosities of 0.96–1.63 dl/g. All the polyesters are amorphous and most of them are partially soluble in most common organic solvents, but easily soluble in concentrated sulfuric acid. Their glass transition temperatures (T_g) range from190.15 to 245.28°C, and the temperatures of 10% weight loss as high as 180 to 220°C in air, indicating that these aromatic polyesters have high T_g and excellent thermal stability.     

Phenothiaphosphine-containing polyamides and polyesters

Phosphorus-containing polyamides and polyesters, which had tricyclic fused rings (phenothia-phosphine rings) in the main chain, were prepared and the properties of the resulting polymers were examined. These polymers were obtained at highly reduced viscosities in satisfactory yields by the polycondensation of 2,8-dichloroformyl-10-phenylphenothiaphosphine 5,5,10-trioxide with aromatic diamines or bisphenols. The polyamides and polyesters were soluble in polar aprotic solvents such as dimethylacetamide and N-methyl-2-pyrrolidone; the polyesters were also soluble in chloroform. The polymers exhibited good heat resistance. The phenothiaphosphine-containing polyamides and polyesters self-extinguished immediately when flame was removed and were highly flame-resistant. The polyester obtained from bisphenol A showed a limiting oxygen index value of 43.5.     

Preparation and properties of high performance epoxy–silsesquioxane hybrid resins prepared using a maleimide–alkoxysilane compound as a modifier

An alkoxysilane compound possessing maleimide moiety (MSM) was prepared from N‐(4‐hydroxyphenyl)maleimide and 3‐glycidoxypropyltrimethoxysilane and was used as a modifier of epoxy resins. In situ curing epoxy resins with MSM resulted in epoxy resins with good homogeneity. Just 5–10 wt % of MSM is sufficient to yield high glass transition temperature (165 °C), good thermal stability above 360 °C, and high flame retardancy (LOI = 30) to bisphenol‐A‐based epoxy resins. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5787–5798, 2005     

Codendronized polymers pendent with alternating dendritic wedges

Codendronized polymers pendent with Fréchet‐type poly(benzyl ether) dendron and polyester dendron alternating structure have been produced by combining macromonomer and graft‐from approach. Alternating copolymerization of the styryl dendrons of three generations and N‐(2‐hydroxyethyl)maleimide was used to prepare the polymer backbone bearing the first kind of dendritic wedges, then polyester dendrons were grown up from the pendant hydroxy groups through iterative esterification and deprotection reactions. Then, a kind of codendronized polymer bearing different dendritic wedges with an alternating structure was thus obtained. Since the pendent dendrons were different and each of them was well‐defined, such codendronized polymer can be a multicompartment wormlike molecule. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3994–4001, 2007     

Synthesis and characterization of new cardo polyesters

New phthalide-containing bisphenols, phenolphthalein-N-(3-methylanilide) (3-PMA), and phenolphthalein-N-(4-methylanilide) (4-PMA), were synthesized from phenolphthalein and m- and p-toluidines. These bisphenols were polycondensed with terephthaloyl chloride (TPC) using an interfacial or solution polymerization technique to yield new polyesters. Copolymers were also obtained by utilizing different molar proportion of phenolphthalein (PPH) and 3-PMA or 4-PMA with TPC. The polymers prepared by solution polymerization were obtained in 93–99% yields and showed reduced viscosities in the range 0.37–0.83 dL/g. They were readily soluble in chlorinated hydrocarbons and aprotic polar solvents. The polyesters showed glass transition temperatures in the range 261–300°C as measured by DSC. Thermogravimetric analysis of the polyesters indicated no weight loss below 408°C under N₂ atmosphere. Structure–property correlations among these cardo polyesters have been discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3227–3234, 1997     

Healable network polymers bearing flexible poly(lauryl methacrylate) chains via thermo‐reversible furan‐maleimide diels–alder reaction

A new ATRP initiator containing two furyl rings, namely, bis(furan‐2‐ylmethyl) 2‐bromopentanedioate was synthesized starting from commercially available l ‐glutamic acid as a precursor. Well‐defined bisfuryl‐terminated poly(lauryl methacrylate) macromonomers with molecular weight and dispersity in the range 5000–12,000 g mol^?1 and 1.30–1.37, respectively, were synthesized employing the initiator by atom transfer radical polymerization (ATRP). Independently, 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione) was synthesized as a tris‐maleimide counterpart for furan‐maleimide click reaction. Thermo‐reversible network polymer bearing flexible poly(lauryl methacrylate; (PLMA) chains was obtained by furan‐maleimide Diels–Alder click reaction of bisfuryl‐terminated PLMA with 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione). The prepared network polymer showed retro‐Diels–Alder reaction in the temperature range 110–170 °C as determined from DSC analysis. The presence of low Tg (–40 °C) PLMA chains induced chain mobility to the network structure which led to the complete scratch healing of the coating at 60 °C in five days due to furan‐maleimide adduct formation. The storage modulus of the network polymer was found to be 3.7 × 10⁴ Pa at the constant angular frequency of 5 rad/sec and strain of 0.5%. The regular reversal of storage (G ′) and loss modulus (G ″) was observed with repeated heating (40 to 110 °C) and cooling cycles (110 to 40 °C) at constant angular frequency and strain. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2700–2712     

Chemoselective polyesterification by direct polycondensation

A convenient method for the synthesis of polyester‐containing amino substitutes on the aromatic rings of the backbone has been developed. This polyester was prepared by chemoselective polyesterification of isophthalic acid with bisphenol having an amino group in the presence of the condensing agent diphenyl(2,3‐dihydro‐2‐thioxo‐3‐benzoxazolyl)phosphonate ( 1 ) and 1,5‐diazabicyclo[4,3,0]‐5‐nonene as a base. The model reactions were carried out in detail to elucidate appropriate conditions of chemoselective polyesterification. Direct polycondensation of isopthalic acid with 4,4′‐[1‐(4‐aminophenyl)ethylidene]bisphenol proceeded smoothly under mild conditions and produced the desired polyester with a number average molecular weight of 11,000 and M_w/M_n of 2.22. The polymer obtained was characterized by IR, ¹H, and ¹³C NMR spectroscopies. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 78–85, 2001     

Synthesis and characterization of poly(2,5‐furan dicarboxylate)s based on a variety of diols

Novel polyesters from renewable resources based on 2,5‐dicarboxylic acid and several diols were synthesized and characterized using different polycondensation techniques. The aliphatic diols were sufficiently volatile to allow the use of polytransesterifications, which gave high‐molecular weight semicrystalline materials with good thermal stability. In particular, the polyester based on ethylene glycol displayed properties comparable with those of its aromatic counterpart, poly(ethylene terephthalate), namely, the most important industrial polyester. The use of isosorbide gave rise to amorphous polymers with very stiff chains and hence a high glass transition temperature and an enhanced thermal stability. The interfacial polycondensation between the acid dichloride and hydroquinone produced a semicrystalline material with features similar to those of entirely aromatic polyesters, characterized essentially by the absence of melting and poor solubility, both associated with their remarkable chain rigidity. The replacement of hydroquinone with the corresponding benzylic diol was sufficient to provide a more tractable polyester. This study provided ample evidence in favor of the exploitation of furan monomers as renewable alternatives to fossil‐based aromatic homologs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of aromatic poly(ether amide amide ether ketone ketone)s by electrophilic Friedel–Crafts solution polycondensation

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐p‐phenylenediamine (BPBPPD), was prepared by the condensation of p‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). Novel aromatic poly(ether amide amide ether ketone ketone)s (PEAAEKKs) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of BPBPPD with a mixture of terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC), over a wide range of TPC/IPC molar ratios, in the presence of anhydrous aluminum chloride and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influences of reaction conditions on the preparation of polymers were examined. The polymers obtained were characterized by different physico–chemical techniques such as FT‐IR, Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), and wide angle X‐ray diffraction (WAXD). The polymers with 70–100 mol% IPC are semicrystalline and have remarkably increased T_gs over commercially available poly(ether ether ketone) (PEEK) and poly(ether ketone ketone) (PEKK) due to the incorporation of amide groups in the main chain. The polymers with 70–80 mol% IPC had not only high T_gs of 209–213°C, but also moderate T_ms of 339–348°C, which are suitable for melt processing. The polymers with 70–80 mol% IPC had tensile strengths of 107.5–109.8 MPa, Young's moduli of 2.53–2.69 GPa, and elongations at break of 9–11% and exhibited high thermal stability and good resistance to organic solvents. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of new soluble polyesters derived from various cardo bisphenols by solution polycondensation

A series of new polyesters was prepared from terephthaloyl (or isophthaloyl) chloride acid with various cardo bisphenols on solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 150 °C. These polyesters were produced with inherent viscosities of 0.32–0.49 dL · g⁻¹. Most of these polyesters exhibited excellent solubility in a variety of solvents such as N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, and o‐chlorophenol. The polyesters containing cardo groups including diphenylmethylene, tricyclo[5.2.1.0^2,6]decyl, tert‐butylcyclohexyl, phenylcyclohexyl, and cyclododecyl groups exhibited better solubility than bisphenol A–based polyesters. These polymers showed glass transition temperatures (T_g's) between 185 °C and 243 °C and decomposition temperatures at 10% weight loss ranging from 406 °C to 472 °C in nitrogen. These cardo polyesters exhibited higher T_g's and better solubility than bisphenol A‐based polyesters. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4451–4456, 2000     

High‐Tg Thiol‐Click Thermoset Networks via the Thiol‐Maleimide Michael Addition

Thiol‐click reactions lead to polymeric materials with a wide range of interesting mechanical, electrical, and optical properties. However, this reaction mechanism typically results in bulk materials with a low glass transition temperature (T_g) due to rotational flexibility around the thioether linkages found in networks such as thiol‐ene, thiol‐epoxy, and thiol‐acrylate systems. This report explores the thiol‐maleimide reaction utilized for the first time as a solvent‐free reaction system to synthesize high‐T_g thermosetting networks. Through thermomechanical characterization via dynamic mechanical analysis, the homogeneity and T_gs of thiol‐maleimide networks are compared to similarly structured thiol‐ene and thiol‐epoxy networks. While preliminary data show more heterogeneous networks for thiol‐maleimide systems, bulk materials exhibit T_gs 80 °C higher than other thiol‐click systems explored herein. Finally, hollow tubes are synthesized using each thiol‐click reaction mechanism and employed in low‐ and high‐temperature environments, demonstrating the ability to withstand a compressive radial 100 N deformation at 100 °C wherein other thiol‐click systems fail mechanically.

     

A Diels‐Alder/retro Diels‐Alder strategy to synthesize polymers bearing maleimide side chains

Polymers containing thiol‐reactive maleimide groups on their side chains have been synthesized by utilization of a novel methacrylate monomer containing a masked maleimide. Diels‐Alder reaction between furan and maleimide was adapted for the protection of the reactive maleimide double bond prior to polymerization. AIBN initiated free radical polymerization was utilized for synthesis of copolymers containing masked maleimide groups. No unmasking of the maleimide group was evident under the polymerization conditions. The maleimide groups in the side chain of the polymers were unmasked into their reactive form by utilization of retro Diels‐Alder reaction. This cycloreversion was monitored by thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), and ¹H and ¹³C NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4545–4551, 2007     

Methylene-bridged aromatic polyesters. Synthesis,characterization, and radiation-induced crosslinking

Aromatic polyesters connected by methylene groups were synthesized. Two pairs of aromatic diacid chlorides, 3,3′-methylenedibenzoyl chloride and 4,4′-methylenedibenzoyl chloride were each polymerized via interfacial polycondensation with 2,2-bis(4-hydroxyphenyl)propane (bisphenol A), 3,3′-methylenediphenol, and 4,4′-methylenediphenol. For comparison, 3,3′-carbonyldibenzoyl chloride and 4,4′-carbonyldibenzoyl chloride were similarly polymerized with bisphenol A. Substitution of meta,meta' oriented phenylene groups for para,para' oriented phenylene groups had a significant and cumulative effect in reducing the glass transition temperatures of the polymers, thereby enhancing their processability. In air the methylene groups of the polyesters undergo oxidation and crosslinking at elevated temperatures. Electron beam irradiation of thin films of the methylene-linked polyesters at room temperature resulted in some chain extension and crosslinking, as evidenced by increased solution viscosity and gel formation. Irradiation at a temperature near or above the glass transition temperatures of the polymers greatly enhanced the tendency for the polymers to crosslink.