Shape recovery liquid crystal elastomer synthesized by melt‐polycondensation

A novel liquid crystal elastomer (LCE) synthesized by melt polymerization, which exhibits the capacity of shape memory, is reported here for the first time. The method of synthesize the shape memory LCE has been explored. A facile two‐step method to synthesize these anisotropic materials to realize reversible shape change behavior is reported. The first reaction is the addition of nematic liquid crystal molecules to form a kind of liquid crystal polymer. Subsequently, the polymer is crosslinked to trap the order of the liquid crystal into a crosslinked LCE. The LCE exhibits liquid crystalline behavior which has shape memory with excellent fixity and recovery. Its shape memory and actuating properties also have been studied. When reheating the LCE to 165 °C, the shape will recover. The main chains and crosslinked bonds of the LCE contain ester groups, which are sensitive to alkaline and acidic condition. It turns out that the LCE is intact under acidic condition, but it can be degraded under alkaline condition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 389–394     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Recent advances in polymer network liquid crystal spatial light modulators

Polymer network liquid crystal (PNLC) spatial light modulators are attractive for display and photonic applications because they can achieve submillisecond response time while keeping a large phase change. However, their on-state scattering caused by the grain boundary of LC multidomains hinders their applications. In this article, we review recent progress on the development of scattering-free PNLCs extending from short-wavelength infrared to visible region by reducing the domain sizes to ∼200 nm through low temperature curing process. To reduce operation voltage, both transmissive and reflective modes, LC material properties (birefringence and dielectric anisotropy), polymer composition and concentration, and pretilt angle effect are analyzed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 183–192     

Effects of the structures of polymerizable monomers on the electro‐optical properties of UV cured polymer dispersed liquid crystal films

Polymer dispersed liquid crystal (PDLC) films were prepared by photopolymerization of liquid crystal (LC)/polymerizable monomers/photoinitiator composites. The effects of the structures of the polymerizable monomers on the electro‐optical properties of PDLC films were investigated. It was found that the length of the molecular chain and the rigidity and flexibility of molecules influenced the structure of the polymer network in the PDLC films somewhat, and then affected the electro‐optical properties of the composites accordingly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1369–1375, 2008     

Synthesis and curing of liquid crystalline epoxy resin based on naphthalene mesogen

Aromatic liquid crystalline epoxy resin (LCE) based on naphthalene mesogen was synthesized and cured with aromatic diamines to prepare heat‐resistant LCE networks. Diaminodiphenylester (DDE) and diaminodiphenylsulfone (DDS) were used as curing agents. The curing reaction and liquid crystalline phase of LCE were monitored, and mechanical and thermal properties of cured LCE network were also investigated. Curing and postcuring peaks were observed in dynamic DSC thermogram. LCE network cured with DDE displayed liquid crystalline phase in the curing temperature range between 183 and 260°C, while that cured with DDS formed one between 182 and 230°C. Glass transition temperature of cured LCE network was above 240°C, and crosslinked network was thermally stable up to 330°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 419–425, 1999     

Highly thermal conductive benzoxazine‐epoxy interpenetrating polymer networks containing liquid crystalline structures

A diamine‐based benzoxazine monomer (Bz) and a liquid crystalline epoxy monomer (LCE) are synthesized, respectively. Subsequently, a benzoxazine‐epoxy interpenetrating polymer network (PBEI) containing liquid crystalline structures is obtained by sequential curing of the LCE and the Bz in the presence of imidazole. The results show that the preferential curing of LCE plays a key role in the formation mechanism of liquid crystalline phase. Due to the introduction of liquid crystalline structures, the thermal conductivity of PBEI increases with increasing content of LCE. When the content of LCE is 80 wt %, the thermal conductivity reaches 0.32 W m^?1 K^?1. Additionally, the heat‐resistance of PBEI is superior to liquid crystalline epoxy resin. Among them, PBEI55 containing equal weight of Bz and LCE has better comprehensive performance. Its thermal conductivity, glass transition temperature, and the 5 % weight loss temperature are 0.28 W m^?1 K^?1, 160 °C, and 339 °C, respectively. By introducing boron nitride (BN) fillers into PBEI55, a composite of PBEI/BN with the highest thermal conductivity of 3.00 W m^?1 K^?1 is obtained. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1813–1821     

Self‐sustained actuation from heat dissipation in liquid crystal polymer networks

Liquid crystal polymer networks (LCNs) lead the research geared toward macroscopic motion of materials. These actuators are molecularly programed to adapt their shape in response to external stimuli. Non‐photo‐responsive thin films of LCNs covered with heat absorbers (e.g., graphene or ink) are shown to continuously oscillate when exposed to light. The motion is governed by the heat dissipated at the film surface and the anisotropic thermal deformation of the network. The influence of the LC molecular alignment, the film thickness, and the LC matrix on the macroscopic motion is analyzed to probe the limits of the system. The insights gained from these experiments provide not only guidelines to create actuators by photo‐thermal or pure photo‐effects but also a simple method to generate mechanical oscillators for soft robotics and automated systems. © 2018 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1331–1336     

The effect of the curing agent content on the curing and liquid‐crystalline phase of liquid‐crystalline epoxy resin

The effect of the curing agent content on the curing behavior and liquid‐crystalline (LC) phase of the liquid‐crystalline epoxy (LCE) resin 4,4′‐di(2,3‐epoxypropyloxy)phenyl benzoate was studied. Diaminodiphenylester (DDE) was used as a curing agent. The curing behavior was observed via differential scanning calorimetry, and the LC phase was investigated with a polarized optical microscopy. The LC phase in the LCE/DDE mixture with a high DDE content was developed during curing. The onset time was inversely proportional to the DDE content. The mesophase stability of LCE/DDE was enhanced by the addition of large amounts of DDE. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 374–379, 2001     

The role of segregation in the polarized emission from polyfluorene embedded in a liquid crystal

Polyfluorene (PFO) embedded in a nematic liquid crystal (LC) matrix is investigated. For low PFO weight contents, a homogeneous dispersion is obtained which displays a strong fluorescence anisotropy along the LC director, indicating a significant alignment of the polymeric chains along this direction. Besides, for relatively high PFO weight contents, phase separation takes place. Under these conditions, the sample is composed of micrometer‐sized domains, where the two species are in solution, enclosed by segregated polymeric boundaries. By polarized‐photoluminescence imaging and spectroscopy, it is found that most of the light emission originates from these boundaries and gets strongly pinned along their orientation. Since boundaries are mainly oriented orthogonal to the LC chains, this morphological alignment results in a system in which the orientation of the polarization emission can be predicted and possibly controlled. Conversely, in the homogeneous sample one can obtain a homogeneous emission polarization by controlling the alignment of the LC. These features are potentially relevant for the development of flexible polarization‐sensitive optoelectronic devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1558–1563     

Suppressing pretilt angle for enhancing black quality in diagonal viewing angle of homogenously aligned liquid crystal display

The diagonal viewing angle light leakage in a black state of in-plane switching (IPS) liquid crystal display (LCD) associated with pretilt angle has been investigated. The mechanical rubbing process with a cloth causes relatively high pretilt angle in the homogenously aligned liquid crystals (LCs) so that the tilted LC director results in increase of a light leakage in a black state at diagonal viewing angles. In this study, we theoretically estimated using classical optic theory how the light leakage in a black state at diagonal viewing angle is associated with the pretilt angle and also proposed an effective method to reduce the pretilt angle from 1.5° to 0° in rubbed IPS LCD by utilising polymer stabilisation. With this approach, we could successfully acquire a better black quality in all viewing angles as compared with normal IPS LCD.     

Low temperature polymerization of novel,monotropic liquid crystalline benzoxazines

Cationic ring opening polymerization at a lower temperature range/faster polymerization than ordinary benzoxazine resins has been achieved without added initiators or catalysts via liquid crystalline (LC) benzoxazine resins. Faster polymerization is observed even above the liquid crystal forming temperature. The FTIR spectra show that opening of the oxazine ring occurs even at 110 °C generating phenolic groups that auto‐catalyzed the cationic polymerization of the monomer increasing the rate of polymerization. The newly formed H‐bonds inhibit the formation of LC phases after polymerization. Some of the monomers show nematic LC transitions upon cooling. None of them showed LC transitions during the heating cycle, exhibiting monotropic LC phases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5871–5881, 2009     

Exploiting catalytic chain transfer polymerization for the synthesis of carboxylated latexes via sulfur‐free RAFT

We present a systematic study of incorporating carboxyl groups into latex particles to enhance colloidal stability and the physical properties of the latex. Statistical copolymers of methacrylic acid and methyl methacrylate) were synthesized via catalytic chain transfer polymerization (CCTP) in emulsion. The vinyl‐terminated oligomers were in turn successfully utilized as chain transfer agents for the formation of diblock and pseudo triblock copolymers via sulfur‐free reversible addition–fragmentation chain transfer polymerization (SF‐RAFT). These copolymers were characterized using ¹H NMR, size exclusion chromatography (SEC), dynamic light scattering (DLS), dynamic mechanical analysis (DMA), contact angle measurements and matrix‐assisted laser desorption/ionization time of flight mass spectroscopy (MALDI‐TOF‐MS) techniques. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, E1–E9     

Synthesis and properties of photoalignable aromatic polyesters containing phenylenediacrylate units in their backbones and n‐alkyl moieties in their side groups

A series of poly[oxy(4‐n‐alkyl‐3,5‐benzoate)oxy‐1,4‐phenylenediacryloyl]s (PPDA‐CnBZ polymers) with high molecular weights was synthesized. These polymers exhibit excellent solubility in some common organic solvents and produce good quality films using conventional spin‐casting and drying processes. The polymers are thermally stable up to 357–362 °C in a nitrogen atmosphere; their glass transition temperatures are greater than 121 °C. The photoreactions and photoalignments of the polymers were investigated using ultraviolet‐visible and infrared spectroscopy, and their liquid crystal (LC) alignment properties were examined. The phenylenediacrylate (PDA) chromophores in the polyesters were found to mainly undergo photocyclization upon ultraviolet light irradiation. Irradiation of the polyester films with linearly polarized ultraviolet light (LPUVL) induces preferential orientation of the polymer main chains, while the unreacted PDA chromophores are aligned along the direction perpendicular to the electric vector of the LPUVL. All the films irradiated with LPUVL were found to align LCs in a direction perpendicular to the electric vector of the LPUVL. Moreover, these LC alignments persisted even on irradiated films annealed at temperatures up to 210 °C, which is much higher than the glass transition temperatures of the polyesters. These LC alignment characteristics are due to the anisotropic interactions of the LC molecules with the oriented polymer chains and with the unreacted PDA chromophores. LC alignments on the polyester film surfaces have homeotropic to homogeneous characteristics, depending on the length of the n‐alkyl side group, providing strong evidence that the n‐alkyl side groups of the polyesters play a critical role in determining the pretilt angles of the LCs. The LC pretilt angles were also found to be influenced by the thermal annealing history of the irradiated films. In summary, the excellent properties of the PPDA‐CnBZ polymers make them promising candidate materials for use as LC alignment layers in advanced LC display devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1322–1334, 2004     

Novel thermotropic esters‐based polymers with broad nematic processing windows

In this study, a new series of semiflexible liquid crystalline (LC) polyesters and poly(ester‐amide)s were synthesized and characterized. Polymers based on 4‐hydroxybenzoic acid (4‐HBA), 6‐hydroxy‐2‐naphthoic acid (HNA), suberic acid (SUA), and sebacic acid (SEA) were modified with hydroquinone (HQ) and different concentrations of 4‐acetamidophenol (AP) to obtain a polyester and two poly(ester‐amide)s, respectively. All polymers were successfully prepared using conventional melt‐condensation techniques. The polymers were characterized by inherent viscosity measurements, SEC, hot‐stage polarizing microscopy, DSC, and TGA. The mechanical behavior was investigated using DMTA and tensile testing. All linear polymers have T_gs in the range of 50–80 °C and melt between 120 and 150 °C. Our polymers display good thermooxidative stabilities (5% wt loss at ～ 400 °C) and exhibit homogeneous nematic melt behavior over a wide temperature range (ΔN ～ 250 °C). The liquid crystal phase was lost when high concentrations of nonlinear monomers such as 3‐HBA (>27 mol %) and resorcinol (RC) (>23 mol %) were incorporated. The LC polyester based on 4‐HBA/HNA/HQ/SUA/SEA could easily be processed into good quality films and fibers. The films display good mechanical properties (E′ ～ 4 GPa) and high toughness, that is, ～ 15% elongation at break, at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6565–6574, 2008     

Control of the microstructure of polymer network and effects of the microstructures on light scattering properties of UV‐cured polymer‐dispersed liquid crystal films

Polymer‐dispersed liquid crystals (PDLC) films were prepared from ultraviolet (UV) irradiation‐induced polymerization of the photopolymerizable monomers in photopolymerizable monomers/nematic liquid crystal (LC) mixtures. The effects of the composition of the mixtures, the curing temperature, and the UV light intensity on the microstructure of the polymer network in the PDLC films were investigated. Furthermore, the effects of the microstructures on the light scattering properties of the PDLC films in the wavelength region of 300–2500 nm were studied experimentally and theoretically based on the combination of three kinds of classical light scattering theories: the Rayleigh‐Gans (RG) approach, the anomalous diffraction (AD) approach, and the geometrical optics (GO) approach. It was found that the sizes of LC domain in PDLC films increased with the increase of the LC content as well as the decrease of the UV curing intensity, while increased at first and then decreased with the increase of the curing temperature. Moreover, smaller LC domain sizes could exhibit strong scattering properties in a smaller VIS wavelength region and the transmittance in NIR region (especially in the wavelength range of 1300–2500 nm) obviously decreased with the increasing sizes of LC domain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2090–2099, 2008     

Effect of Monomer Composition on the Performance of Polymer‐Stabilized Liquid Crystals with Two‐Step Photopolymerization

Polymer‐stabilized cholesteric liquid crystal (PSCLC) films with broadband reflection based on two‐step photopolymerization are fabricated. Owing to the helical twisting power (HTP) value of the chiral dopant (CD) decreasing with increasing temperature, PSCLC films with broadband reflection are obtained by two‐step polymerization anchoring helical pitch of different length at two different temperature points. The effect of monomer composition on the PSCLC reflection properties before and after polymerization was studied. The results show that the free‐radical monomers with appropriate concentration and cationic monomers with sufficient concentration are vital for the formation of PSCLC films with broadband reflection. In addition, the experiments show that the increase in the functionality and rigidity of the cationic monomer has a positive effect on the broadening of the reflection band. This study can provide guidance and reference for the selection of monomer species and concentration in PSCLC preparation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1126–1132     

New approach to fabricate an extremely super‐amphiphobic surface based on fluorinated silica nanoparticles

Superoleophobic surfaces possessing static contact angles greater than 140° with organic liquids are extremely rare. A simple approach has been developed to fabricate an extremely superamphiphobic coating material based on fluorinated silica nanoparticles resulting contact angles of water and diiodomethane at 167.5° and 158.6°, respectively. The contact angle of diiodomethane at 158.6° is substantially higher than the highest literature reported value we know of at 110°. In addition, this developed film also possesses extremely high contact angles with other organic liquids such as soybean oil (146.6°), decahysronaphthalene (142.5°), diesel fuel (140.4°), and xylene (140.5°). This developed superamphiphobic organic–inorganic hybrid film possesses unique liquid repellency for both water and organic liquids that can be used as functional coatings on numerous substrates by a simple coating process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1984–1990, 2008     

Elastic properties and mechanical relaxation behaviors of PVDF (poly (vinylidene fluoride)) at temperatures between −20 and 100 °C and at 2 MHz ultrasonic frequency

The elastic properties of PVDF have been investigated as a function of temperature. The propagation velocity and absorption of longitudinal and transverse ultrasonic waves have been measured at a constant frequency of 2 MHz and temperatures between –20 and 100 °C. Hence, the temperature dependences of storage and loss elastic constants have been obtained for temperatures between –20 and 100 °C. It has been seen that the relaxation behavior is affected from the form of mechanical disturbance. For the longitudinal mode, only one relaxation peak at 42 °C, but for transverse mode three relaxation peaks at 28 °C, 60 °C, and 94 °C have been observed. The results have been compared with the literature values obtained previously for PVDF. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2862–2873, 2005     

All‐aromatic liquid crystalline thermosets with high glass transition temperatures

We have synthesized and characterized a new family of low melting all‐aromatic ester‐based liquid crystal oligomers end‐capped with reactive phenylethynyl end groups. In a consecutive, high‐temperature step, the reactive end groups were thermally activated and polymerization was initiated. This reactive oligomer approach allows us to synthesize liquid crystal thermosets with outstanding mechanical and thermal properties, which are superior to well‐known high‐performance polymers such as PPS and PEEK. We have modified an intractable LC formulation based on hydroquinone and terephthalic acid, with M_n = 1000, 5000, and 9000 g mol^?1, and varied the backbone composition using isophthalic acid, resorcinol, 4‐hydroxy‐benzoic acid, 6‐hydroxy‐2‐naphthoic acid, and chlorohydroquinone. All fully cured polymers showed glass transition temperatures in the range of 164–275 °C, and high storage moduli at room temperature (～ 5 GPa) and elevated temperature (～ 2 GPa at 200 °C). All oligomers display nematic mesophases and in most cases, the nematic order is maintained after cure. Rheology experiments showed that the phenylethynyl end group undergoes predominantly chain extension below 340 °C and crosslinking above this temperature. Highly aligned fibers could be spun from the nematic melt, and we found that the order parameter 〈P₂〉 was not affected by the chain extension and crosslink chemistry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1368–1380, 2009     

Effect of molecular weight of macro‐iniferter on electro‐optical properties of polymer dispersed liquid crystal films prepared by iniferter polymerization

Polymer dispersed liquid crystal (PDLC) films were prepared by a devised method, in which photo‐polymerization induced phase separation in a mixtures of a macro‐iniferter, methyl acrylater, and liquid crystal. The morphology of the obtained PDLC films was examined on a polarized optical microscopy, and the effect of molecular weight of MIs on the electro‐optical properties was deliberately investigated. Decreasing the molecular weight of MIs in the films led to formation of larger liquid crystal droplets and a lower V_th values. V_sat increased and the memory effect decreased because of the increased interface anchoring strength induced by the higher molecular weight of polymer matrices. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1530–1534, 2009