Preparation and property comparison of ortho,meta, and para autocatalytic phthalonitrile compounds with amino group

Phthalonitrile resins with many striking properties have drawn much attention as potential candidates for use in composite matrices, adhesives, films, and electrical conductors for the last 30 years. However, it is common shortcomings for phthalonitrile monomers to have high‐temperature melting point and need extreme conditions to develop binary phthalonitrile/additives composition. Here, three kinds of self‐catalyzed phthalonitrile compounds with low melting point were synthesized, whose structures were characterized by Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance. The different cure behaviors, owing to the different positions of catalyzed group on benzene ring, were investigated by differential scanning calorimetry, and cure kinetics parameters were also calculated. The results showed that the meta and para position monomers possessed better reactivity. Melt‐processability study by a rheometer indicated that the ortho one owned the largest processing window. Furthermore, the FTIR spectra demonstrated that the cured monomers contained the same structure with a conventional binary phthalonitrile system. All the cured monomers had excellent thermal stability according to thermogravimetric analysis. Mechanical property was determined by dynamic mechanical analysis, and the results showed that the glass transition temperature (represented by the peak temperature of tanδ) was high up to 550°C for all the three cured monomers. Consequently, these autocatalytic phthalonitrile monomers may be good candidates as matrix for high‐performance polymeric materials. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterization of self‐catalyzed imide‐containing pthalonitrile resins

Some new amino‐ and imide‐containing phthalonitrile compounds with 1:1 molar ratio of amino group to pthalonitrile unit were successfully synthesized. The molecular structures were characterized by spectroscopic techniques. They were thermally polymerized under nitrogen/air, even in the absence of curing additives. The thermal properties of the cured products were characterized by thermogravimetric analysis and differential scanning calorimetry. The 5% weight loss temperatures ranged from 525 to 528 °C and 513 to 520 °C under nitrogen and air, respectively. Char yields (900 °C) were in the range of 62–70%. Rheometric measurements showed that the rate of the cure reaction differs for all the three monomers. The glass transition temperature advances with increasing extent of cure and disappears on postcure at 375 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and properties of a novel high temperature pyridine‐containing phthalonitrile polymer

A novel pyridine‐containing aromatic phthalonitrile monomer, 2,6‐bis[4‐(3,4‐dicyanophenoxy)benzoyl]pyridine (BCBP) was synthesized from the nitro displacement of 4‐nitrophthalonitrile by the phenoxide of 2,6‐bis (4‐hydroxybenzoyl)pyridine (BHBP). 4‐(Aminophenoxy) phthalonitrile (APPH) was selected to promote the curing reaction, and the curing behavior has been investigated by differential scanning calorimetric (DSC), suggesting a wide processing window about 64 °C. Different curing additive concentrations resulted in polymers with different crosslinking degrees and subsequently influenced the performance of resins. The resulting BCBP polymer exhibited high glass transition temperatures exceeding 400 °C, outstanding thermo‐oxidative stability with weight retention of 95% at 530 °C, indicating a significant improvement in thermal properties endowed by pyridine units. Additionally, it also showed a lower overall water absorption after submersion in boiling water for 50 hours. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3819–3825     

Large melting point depression of 2–3‐nm length‐scale nanocrystals formed by the self‐assembly of an associative polymer: Telechelic,pyrene‐labeled poly(dimethylsiloxane)

Large melting point depressions for organic nanocrystals, in comparison with those of the bulk, were observed in an associative polymer: telechelic, pyrene‐labeled poly(dimethylsiloxane) (Py‐PDMS‐Py). Nanocrystals formed within nanoaggregates of pyrenyl units that were immiscible in poly(dimethylsiloxane). For 5 and 7 kg/mol Py‐PDMS‐Py, physical gels resulted, with melting points exceeding 40 °C and with small‐angle X‐ray scattering peaks indicating that the crystals were nanoconfined, were 2–3 nm long, and contained roughly 18–30 pyrenyl dye end units. In contrast, 30 kg/mol Py‐PDMS‐PY was not a gel and exhibited no scattering peak at room temperature; however, after 12 h of annealing at ?5 °C, multiple melting peaks were present at 5–30 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3470–3475, 2004     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Synthesis and properties of a bisphenol A based phthalonitrile resin

A multiple aromatic ether linked phthalonitrile was synthesized and characterized. The oligomeric phthalonitrile monomer was prepared from the reaction of an excess amount of bisphenol A with 4,4′‐difluorobenzophenone in the presence of K₂CO₃ as the base in an N,N‐dimethylformamide/toluene solvent mixture, followed by end capping with 4‐nitrophthalonitrile in a two‐step, one‐pot reaction. The monomer properties were compared to those of the known resin 2,2‐bis[4‐(3,4‐dicyanophenoxy)phenyl]propane after being cured in the presence of bis[4‐(4‐aminophenoxy)phenyl]sulfone. Rheometric measurements and thermogravimetric analysis showed that the oligomeric phthalonitrile resin maintained good structural integrity upon heating to elevated temperatures and exhibited excellent thermal properties along with long‐term oxidative stability. The ether‐linked phthalonitrile resin absorbed less than 2.5% water by weight after exposure to an aqueous environment for extended periods. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4136–4143, 2005     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

A novel benzimidazole‐containing phthalonitrile monomer with unique polymerization behavior

A novel benzimidazole‐containing phthalonitrile monomer (BIPN) was synthesized. The chemical structure of BIPN was confirmed by various spectroscopic techniques. Differential scanning calorimetry measurement revealed that the self‐promoted polymerization reaction of the BIPN proceeds extremely sluggish and showed low polymerization exothermic effect. Subsequent rheological measurement displayed that the BIPN was able to keep a stable and low melt viscosity for 4 h at 300 °C, 2 h at 310 °C, and 50 min at 330 °C. The derived BIPN polymers showed excellent thermal properties revealed by thermogravimetric analysis, which were better than those of the corresponding polymer derived from phthalonitrile monomer without benzimidazole moiety. IR analysis confirmed the occurrence of the triazine ring within the polymer crosslinking sites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and self‐assembly of multiple‐responsive magnetic nanogels

In this paper, temperature and pH‐sensitive interpenetrating polymer network (IPN) nanogels (NGs) were firstly prepared, and magnetic hybrid NGs were made through in‐situ precipitation of Fe²⁺ and Fe³⁺ into the IPN NGs. Under the optimized condition, the resulting hybrid NG dispersion with up to 17.3 wt% magnetite was stable, while the size distribution of the NGs is broad due to the formation of Fe₃O₄ nanoparticles outside the NGs. In order to synthesize relatively uniform magnetic NGs, magnetite content was reduced to 8.1 wt% magnetite. The NGs with 8.1 wt% magnetite can quickly self‐assemble into colloidal crystals induced by magnet, while such NGs slowly self‐assembled into colloidal crystals without external magnetic field. Furthermore, the reflection wavelength of the self‐assembled magnetic NGs showed red‐shift with increasing pH and temperature.     

Characterization of a self‐oscillating polymer with periodic soluble‐insoluble changes

A copolymer of N‐isopropylacrylamide (NIPAAm), ruthenium‐complex (Ru(bpy)₃), and N‐succinimidyl acrylic acid (NAS) was synthesized to investigate its selfoscillating properties in a solution. This polymer exhibits selfoscillation in turbidity and viscosity synchronized via a Belousov–Zhabotinsky (BZ) reaction. The molecular size of the polymer during oscillation was investigated by dynamic light scattering and electrochemical measurements. Both molecular size and viscosity exhibited periodic changes during the BZ reaction. A simple mechanism accounting for such periodic changes was investigated by numerical calculations. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1578–1588, 2007     

Introducing rigid pyrimidine ring to improve the mechanical properties and thermal‐oxidative stabilities of phthalonitrile resin

In this study, a novel phthalonitrile monomer containing pyrimidine ring, 4,6‐bis[3‐(3,4‐dicya‐ nophenoxy)phenoxy]pyrimidine (BCPM), was successfully synthesized by nucleophilic substitution reaction with resorcinol, 4,6‐dichloropyrimidine and 4‐nitrophthalonitrile. The BCPM monomer was cured by different temperature programs with 4‐(aminophenoxy)phthalonitrile (APPH) as catalyst to give the polymers. The molecular structures of the BCPM monomer and the polymers were investigated by Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetric (DSC) analysis was performed to study the processability of the BCPM monomer, which showed a wide processing window of about 117°C. The mechanical properties and thermal‐oxidative stability of the polymer were characterized by dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), respectively, which indicated that the polymers exhibited excellent storage modulus, high glass transition temperature over 400°C, and outstanding thermal stability. The polymers also have low water absorption capacity and are suitable for humid environments.     

Synthesis of hetero‐telechelic polymers by self‐polyaddition of monomers containing both oxetanyl and carboxyl groups

The synthesis and self‐polyaddition of new monomers, o‐, m‐, and p‐[(3‐ethyloxetane‐3‐yl)methoxyethyl]benzoic acid (o‐EOMB, m‐EOMB, and p‐EOMB) containing both oxetanyl groups and carboxyl groups were examined. The reactions of o‐EOMB, m‐EOMB, and p‐EOMB in the presence of tetraphenylphosphonium bromide as a catalyst in o‐dichlorobenzene at 150–170 °C resulted in self‐polyaddition to give the corresponding hetero‐telechelic polymers poly(o‐EOMB), poly(m‐EOMB), and poly(p‐EOMB) with M_ns = 14,500–33,400 in satisfactory yields. The M_n of poly(o‐EOMB) decreased at higher reaction temperatures than 150 °C, unlike those of poly(m‐EOMB) and poly(p‐EOMB), possibly due to inter‐ or intraester exchange side reactions. It was also found that the thermal properties and solubilities of these polymers were supposed with the proposed structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7835–7842, 2008     

Synthesis and self‐assembly of helical polypeptide‐random coil amphiphilic diblock copolymer

Three amphiphilic rod‐coil diblock copolymers, poly(2‐ethyl‐2‐oxazoline‐b‐γ‐benzyl‐L ‐glutamate) (PEOz‐b‐PBLG), incorporating the same‐length PEOz block length and various lengths of their PBLG blocks, were synthesized through a combining of living cationic and N‐carboxyanhydride (NCA) ring‐opening polymerizations. In the bulk, these block copolymers display thermotropic liquid crystalline behavior. The self‐assembled aggregates that formed from these diblock copolymers in aqueous solution exhibited morphologies that differed from those obtained in α‐helicogenic solvents, that is, solvents in which the PBLG blocks adopt rigid α‐helix conformations. In aqueous solution, the block copolymers self‐assembled into spherical micelles and vesicular aggregates because of their amphiphilic structures. In helicogenic solvents (in this case, toluene and benzyl alcohol), the PEOz‐b‐PBLG copolymers exhibited rod‐coil chain properties, which result in a diverse array of aggregate morphologies (spheres, vesicles, ribbons, and tube nanostructures) and thermoreversible gelation behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3108–3119, 2008     

Enzymatic‐catalyzed polymerization of water‐soluble electrically conductive polymer PEDOT:PSS

Water‐soluble electrically conductive polymer poly(3,4‐ethylenedioxythiophene) (PEDOT) was synthesized by the enzymatic‐catalyzed method using 3,4‐ethylenedioxythiophene (EDOT) as monomer, poly(styrenesulfonate) (PSS) as water‐soluble polyelectrolyte, horseradish peroxidase enzyme as catalyst, and hydrogen peroxide (H₂O₂) as oxidant. Fourier transform infrared spectra and UV–vis absorption spectra confirm the successful enzymatic‐catalyzed polymerization of PEDOT. Dynamic light scattering data confirm the formation of a stable PEDOT:PSS aqueous dispersion. The thermo gravimetric data show that the obtained PEDOT is stable over a fairly high range of temperatures. The atomic force microscopy height images show that the PEDOT:PSS aqueous dispersion can form excellent homogeneous and smooth films on various substrates by conventional solution processing techniques, which renders this PEDOT:PSS aqueous dispersion a very promising candidate for various application in electronic devices. This enzymatic polymerization is a new approach for the synthesis of optical and electrical active PEDOT polymer, which benefits simple setting, high yields, and environmental friendly route. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,self‐assembly,fluorescence, and thermosensitive properties of star‐shaped amphiphilic copolymers with porphyrin core

Star‐shaped amphiphilic poly(ε‐caprolactone)‐block‐poly(oligo(ethylene glycol) methyl ether methacrylate) with porphyrin core (SPPCL‐b‐POEGMA) was synthesized by combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Star‐shaped PCL with porphyrin core (SPPCL) was prepared by bulk polymerization of ε‐caprolactone (CL) with tetrahydroxyethyl‐terminated porphyrin initiator and tin 2‐ethylexanote (Sn(Oct)₂) catalyst. SPPCL was converted into SPPCLBr macroinitiator with 2‐bromoisobutyryl bromide. Star‐shaped SPPCL‐b‐POEGMA was obtained via ATRP of oligo(ethylene glycol) methyl ether methacrylate (OEGMA). SPPCL‐b‐POEGMA can easily self‐assemble into micelles in aqueous solution via dialysis method. The formation of micellar aggregates were confirmed by critical micelle formation concentration, dynamic light scattering, and transmission electron microscopy. The micelles also exhibit property of temperature‐induced drug release and the lower critical solution temperature (LCST) was 60.6 °C. Furthermore, SPPCL‐b‐POEGMA micelles can reversibly swell and shrink in response to external temperature. In addition, SPPCL‐b‐POEGMA can present obvious fluorescence. Finally, the controlled drug release of copolymer micelles can be achieved by the change of temperatures. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reduction and pH dual‐responsive block copolymers containing pendent p‐nitrobenzyl carbamate functionalities: Synthesis and self‐assembly behavior

We report on the preparation of reduction‐responsive amphiphilic block copolymers containing pendent p‐nitrobenzyl carbamate (pNBC)‐caged primary amine moieties by reversible addition–fragmentation chain transfer (RAFT) radical polymerization using a poly(ethylene glycol)‐based macro‐RAFT agent. The block copolymers self‐assembled to form micelles or vesicles in water, depending on the length of hydrophobic block. Triggered by a chemical reductant, sodium dithionite, the pNBC moieties decomposed through a cascade 1,6‐elimination and decarboxylation reactions to liberate primary amine groups of the linkages, resulting in the disruption of the assemblies. The reduction sensitivity of assemblies was affected by the length of hydrophobic block and the structure of amino acid‐derived linkers. Using hydrophobic dye Nile red (NR) as a model drug, the polymeric assemblies were used as nanocarriers to evaluate the potential for drug delivery. The NR‐loaded nanoparticles demonstrated a reduction‐triggered release profile. Moreover, the liberation of amine groups converted the reduction‐responsive polymer into a pH‐sensitive polymer with which an accelerated release of NR was observed by simultaneous application of reduction and pH triggers. It is expected that these reduction‐responsive block copolymers can offer a new platform for intracellular drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1333–1343     

Phthalonitrile‐containing aromatic polyimide thin films with nano‐actuation properties

Polymer films of some polyimides containing pendant phthalonitrile groups were prepared by casting the corresponding poly(amic acid) solutions onto glass plates, followed by thermal imidization under controlled temperature conditions. The poly(amic acid)s were synthesized by polycondensation reaction of 4,4′‐diamino‐4″‐(3,4‐dicyanophenoxy)triphenylmethane, 1, or of different amounts of 1 and 4,4′‐bis(4‐aminophenoxybiphenyl), with two aromatic dianhydrides, 4,4′‐oxydiphthalic anhydride or benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride. Most of the films were flexible and tough and exhibited high thermal stability, having the initial decomposition temperature above 400 °C. Dynamic mechanical analysis and dielectric spectroscopy revealed the influence of phthalonitrile group content on the relaxation processes of polyimides. The values of the dielectric constant at 10 kHz and 20 °C were in the range of 3.25–3.61. The films exhibited nano‐actuation in the range of 240–480 nm, depending on the phthalonitrile group content, when an electric voltage was applied on their surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Concentrated emulsion pathway to self‐compatibilization of polymer blends

Self‐compatibilization is a novel method for preparing compatibilized polymer blends via concentrated emulsion polymerization. In this method, two partially polymerized concentrated emulsions are mechanically mixed, and then they are subjected to complete polymerization. Some compatibilizers are generated at the interfaces between the two kinds of cells, which compatibilize the homopolymers generated simultaneously inside the cells. In particular, when a rigid polymer was blended in this manner with a flexible one, tough materials were obtained. This review describes various ways to generate such self‐compatibilized materials. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 757–764, 2001     

Template–polymer commensurability and directed self‐assembly block copolymer lithography

Block copolymer directed self‐assembly (BCP) with chemical epitaxy is a promising lithographic solution for patterning features with critical dimensions under 20 nm. In this work, we study the extent to which lamellae‐forming poly(styrene‐b‐methyl methacrylate) can be directed with chemical contrast patterns when the pitch of the block copolymer is slightly compressed or stretched compared to the equilibrium pitch observed in unpatterned films. Critical dimension small angle X‐ray scattering complemented with SEM analysis was used to quantify the shape and roughness of the line/space features. It was found that the BCP was more lenient to pitch compression than to pitch stretching, tolerating at least 4.9% pitch compression, but only 2.5% pitch stretching before disrupting into dislocation or disclination defects. The more tolerant range of pitch compression is explained by considering the change in free energy with template mismatch, which suggests a larger penalty for pitch stretching than compressing. Additionally, the effect of width mismatch between chemical contrast pattern and BCP is considered for two different pattern transfer techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 595–603     

The electric self‐heating behavior of graphite‐filled high‐density polyethylene composites

The electric self‐heating behavior of graphite‐powder‐filled high‐density polyethylene is studied. Two equations are proposed to describe the electric‐field dependence of the self‐heating temperature and resistance dependence of the critical field. Based on Ohmic and non‐Ohmic approximations and the heat‐dissipation model, the self‐heating equations are also derived theoretically. The equations show that self‐heating is determined by the initial resistance and true positive temperature coefficient (PTC) effect under fields. Design and application principles for polymer PTC heaters are suggested on the basis of the experimental results and proposed equations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1756–1763, 2000