Flower-like MoS<Subscript>2</Subscript> supported on three-dimensional graphene aerogels as high-performance anode materials for sodium-ion batteries

Flower-like MoS₂ supported on three-dimensional graphene aerogel (MoS₂/GA) composite has been prepared by a facile hydrothermal method followed by subsequent heat-treatment process. Each of MoS₂ microflowers is surrounded by the three-dimensional graphene nanosheets. The MoS₂/GA composite is applied as an anode material of sodium-ion batteries (SIBs) and it exhibits high initial discharge/charge capacities of 562.7 and 460 mAh g^?1 at a current density of 0.1 A g^?1 and good cycling performance (348.6 mAh g^?1 after 30 cycles at 0.1 A g^?1). The good Na⁺ storage properties of the MoS₂/GA composite could be attributed to the unique structure which flower-like MoS₂ are homogeneously and tightly decorated on the surface of three-dimensional graphene aerogel. Our results demonstrate that as-prepared MoS₂/GA composite has a great potential prospect as anodes for SIBs.     

Electron‐transfer transparency of graphene: Fast reduction of metal ions on graphene‐covered donor surfaces

The mechanism of charge transfer through nanomaterials such as graphene remains unclear, and the amount of charge that can be transferred from/to graphene without damaging its structural integrity is unknown. In this communication, we show that metallic nanoparticles can be decorated onto graphene surfaces as a result of charge transfer from the supporting substrate to an adjoining solution containing metal ions. Au or Pt nanoparticles were formed with relatively high yield on graphene‐coated substrates that can reduce these metal ions, such as Ge, Si, GaAs, Al, and Cu. However, metal ions were not reduced on graphene surfaces coated onto non‐reducing substrates such as SiO₂ or ZnO. These results confirm that graphene can be doped by exploiting charge transfer from the underlying substrate; thus graphene is not only transparent with respect to visible light, but also with respect to the charge transfer. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Graphenic Aerogels Decorated with Ag Nanoparticles as 3D SERS Substrates for Biosensing

A versatile and efficient surface-enhanced Raman scattering (SERS) substrate based on a hybrid aerogel composed of reduced graphene oxide (rGO) decorated with silver nanoparticles (AgNPs), suitable for highly sensitive label-free detection of chemical and biological species, is presented. The simple and low-cost one-pot hydrothermal synthesis allows obtaining of a 3D nanostructured spongy-like matrix that shows good spatial distribution of Ag nanoparticles in intimate contact with rGO flakes, characterized by means of several morphological, structural, and compositional techniques. The nanostructured material, tested by SERS analysis with both rhodamine 6G (R6G) and 4-mercaptobenzoic acid (MBA), shows a satisfying SERS efficiency, quantified in terms of minimum detectable concentration of 10⁻¹⁰ and 10⁻⁷ m , corresponding to on- and off-resonant excitation, respectively. The versatility of chemical/biochemical functionalization is successfully demonstrated by exploiting different routes, by immobilizing both protoporphyrin IX (PRPIX) and hemin (H) that take advantage of π−π non-covalent bonding with the graphene layers, as well as thiol-ended oligonucleotides (DNA probes/aptamers) directly grafted on the AgNPs. Finally, after the successful integration of the hybrid aerogel into a microfluidic chip, the biorecognition of miR222 is obtained demonstrating the reliability of the aerogel substrate as SERS platform for biosensing.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

High Rate and Long Cycle Life of a CNT/rGO/Si Nanoparticle Composite Anode for Lithium‐Ion Batteries

Si nanoparticle (Si‐NP) composite anode with high rate and long cycle life is an attractive anode material for lithium‐ion battery (LIB) in hybrid electric vehicle (HEV)/pure electric vehicle (PEV). In this work, a carbon nanotube (CNT)/reduced graphene oxide (rGO)/Si nanoparticle composite with alternated structure as Li‐ion battery anode is prepared. In this structure, rGO completely wraps the entire Si/CNT networks by different layers and CNT networks provide fast electron transport pathways with reduced solid‐state diffusion, so that the stable solid‐electrolyte interphase layer can form on the whole surface of the matrix instead of on single Si nanoparticle, which ensure the high cycle stability to achieve the excellent cycle performance. As a result, the CNT/rGO/Si‐NP anode exhibits high performances with long cycle life (≈455 mAh g^?1 at 15 A g^?1 after 2000 cycles), high specific charge capacity (≈2250 mAh g^?1 at 0.2 A g^?1, ≈650 mAh g^?1 at 15 A g^?1), and fast charge/discharge rates (up to 16 A g^?1). This nanostructure anode with facile and low‐cost synthesis method, as well as excellent electrochemical performances, makes it attractive for the long life cycles at high rate of the next generation LIB applications in HEV/PEV.     

Study of multi-faceted CoS2 introduced graphene aerogel hybrids via chemical approach for an effective electrocatalytic water splitting

The present article reports the synthesis of hybrid structure along with non-precious cobalt-disulfide. A simple hydrothermal method was used to fabricate multi-faceted CoS₂ introduced graphene aerogels. Studies on electrocatalytic activity showed that the presence of CoS₂ facets along with graphene aerogel played a prominent role in the enhancement of proton reduction to hydrogen gas. The CoS₂/graphene aerogel hybrid sample exhibits extremely low overpotential (160 mV vs. RHE), and high current density for HER in acidic solution. The activity enhancement can be attributed to increasing the active electrochemical surface area of graphene aerogel and faceted particles inside the 3D matrix of graphene. Furthermore, the CoS₂/graphene hybrid retained its high activity even after 1000 cycles of cyclic voltammetry scans, signifying longer stability under acidic condition. The results suggest that CoS₂/graphene aerogel hybrids show their potential application to hydrogen evolution reaction.     

Synthesis of Li3V2(PO4)3/reduced graphene oxide cathode material with high-rate capability

The Li₃V₂(PO₄)₃/reduced graphene oxide (LVP/rGO) composite is successfully synthesized by a conventional solid-state reaction with a high yield of 10 g, which is suitable for large-scale production. Its structure and physicochemical properties are investigated using X-ray diffraction, Raman spectra, field-emission scanning electron microscopy, transmission electron microscopy, and electrochemical methods. The rGO content is as low as ~3 wt%, and LVP particles are strongly adhered to the surface of the rGO layer and/or enwrapped into the rGO sheets, which can facilitate the fast charge transfer within the whole electrode and to the current collector. The galvanostatic charge–discharge tests show that the LVP/rGO electrode delivers an initial discharge capacity of 177 mAh g^?1 at 0.5 C with capacity retention of 88 % during the 50th cycle in a wide voltage range of 3.0–4.8 V. A superior rate capability is also achieved, e.g., exhibiting discharge capacities of 137 and 117 mAh g^?1 during the 50th cycle at high C rates of 2 and 5 C, respectively.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

Enhanced catalytic hydrogenation activity of Ni/reduced graphene oxide nanocomposite prepared by a solid-state method

A simple solid-state method has been applied to synthesize Ni/reduced graphene oxide (Ni/rGO) nanocomposite under ambient condition. Ni nanoparticles with size of 10–30 nm supported on reduced graphene oxide (rGO) nanosheets are obtained through one-pot solid-state co-reduction among nickel chloride, graphene oxide, and sodium borohydride. The Ni/rGO nanohybrid shows enhanced catalytic activity toward the reduction of p-nitrophenol (PNP) into p-aminophenol compared with Ni nanoparticles. The results of kinetic research display that the pseudo-first-order rate constant for hydrogenation reaction of PNP with Ni/rGO nanocomposite is 7.66 × 10^?3 s^?1, which is higher than that of Ni nanoparticles (4.48 × 10^?3 s^?1). It also presents superior turnover frequency (TOF, 5.36 h^?1) and lower activation energy (E_a, 29.65 kJ mol^?1) in the hydrogenation of PNP with Ni/rGO nanocomposite. Furthermore, composite catalyst can be magnetically separated and reused for five cycles. The large surface area and high electron transfer property of rGO support are beneficial for good catalytic performance of Ni/rGO nanocomposite. Our study demonstrates a simple approach to fabricate metal-rGO heterogeneous nanostructures with advanced functions.

Open image in new window

Graphical abstract ?

     

Facile and surfactant-free synthesis of SnO<Subscript>2</Subscript>-graphene hybrids as high performance anode for lithium-ion batteries

A facile microwave-assisted ethylene glycol method is developed to synthesize the SnO₂ nanoparticles dispersed on or encapsulated in reduced graphene oxide (SnO₂-rGO) hybrids. The morphology, structure, and composition of SnO₂-rGO are investigated by scanning electron microscopy, transmission electron microscope, thermo-gravimetric analyzer, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The electrochemical performance of SnO₂-rGO as anode materials for lithium-ion batteries was tested by cyclic voltammetry, galvanostatic charge–discharge cycling, and rate capability test. It is found that the SnO₂ nanoparticles with a uniform distribution have p-type doping effect with rGO nanosheets. The as-prepared SnO₂-rGO hybrids exhibit remarkable lithium storage capacity and cycling stability, and the possible mechanism involved is also discussed. Their capacity is 1222 mAhg^?1 in the first cycle and maintains at 700 mAhg^?1 after 100 cycles. This good performance can be mainly attributed to the unique nanostructure, good structure stability, more space for volume expansion of SnO₂, and mass transfer of Li⁺ during cycling.     

Physicochemical and photocatalytic activities of self-assembling TiO2 nanoparticles on nanocarbons surface

TiO₂ nanoparticles were self-assembled on three different dimensional nanocarbon (SWCNT, C₆₀ and graphene) surfaces by a uniform thermal reaction. The effective anchoring of TiO₂ nanoparticles on the nanocarbon surfaces was characterized by FT-IR, XRD, XPS, TEM, Raman spectroscopy, PL and UV-Vis. By investigating the effect of different carbon nanostructures on TiO₂ photocatalyst system, we found that the enhancing photocatalytic activities of nanocarbon/TiO₂ (NT) nanocomposites have still related to great adsorbability and effective charge transfer by nanocarbon introduced, however, no more insights can be provided for peculiar properties on different nanostructures, although graphene by itself has an excellent structure and morphology.     

Formation and lithium doping of graphene on the surface of cobalt silicide

The intercalation of silicon under graphene on the Co(0001) surface, which is accompanied by the formation of a silicon solid solution in cobalt and by the formation of a surface crystalline Co₂Si phase, has been investigated using photoelectron spectroscopy. It has been shown that the formation of cobalt silicide leads to a substantial weakening of the hybridization of electronic states of graphene and cobalt and to the recovery of the Dirac spectrum of electronic states of graphene near the Fermi level. This has made it possible to investigate the electron doping of graphene on the cobalt silicide substrate upon deposition of lithium on its surface. It has been found that doping with lithium leads to a significant charge transfer onto graphene, and the electron concentration reaches 3.1 × 10¹⁴ cm^?2. Moreover, the specific form of the Fermi surface creates favorable conditions for the enhancement of the electron-phonon coupling. As a result, the formed system can be considered as a candidate for the creation of superconductivity in single-layer graphene.     

Ultrafine Mo-Doped Co_2P Nanorods Anchored on Reduced Graphene Oxide as Efficient Electrocatalyst for the Hydrogen Evolution Reaction

One-dimensional(1 D) transition metal phosphides(TMPs) with large specific surface areas,high charge transfer efficiency and excellent electrical conductivity have attracted significant attention in hydrogen evolution reaction(HER) as versatile and active catalysts.Herein,the sub-4 nm Mo-Co_2 P ultrafine nanorods(NRs) anchored on reduced graphene oxide(rGO) were successfully synthesized by a colloidal mesostructured strategy.Electrochemical test results reveal that the Mo-Co_2 P@rGO electrode exhibits superior activity with overpotentials of204 mV and Tafel slope of 88 mV/dec for HER at 10 mA/cm~2,relative to the Co_2 P@rGO electrode in 0.5 M H_2 SO_4 solution.This improvement could be ascribed to the Mo doping,which results in more active sites,higher electrical conductivity and faster electron-transfer rates.This versatile strategy will provide a promising pathway for transition metal-doped compounds as an efficient catalyst.     

Ultrasound-assisted facile one-pot synthesis of ternary MWCNT/MnO2/rGO nanocomposite for high performance supercapacitors with commercial-level mass loadings

Commercial application of supercapacitors (SCs) requires high mass loading electrodes simultaneously with high energy density and long cycle life. Herein, we have reported a ternary multi-walled carbon nanotube (MWCNT)/MnO₂/reduced graphene oxide (rGO) nanocomposite for SCs with commercial-level mass loadings. The ternary nanocomposite was synthesized using a facile ultrasound-assisted one-pot method. The symmetric SC fabricated with ternary MWCNT/MnO₂/rGO nanocomposite demonstrated marked enhancement in capacitive performance as compared to those with binary nanocomposites (MnO₂/rGO and MnO₂/MWCNT). The synergistic effect from simultaneous growth of MnO₂ on the graphene and MWCNTs under ultrasonic irradiation resulted in the formation of a porous ternary structure with efficient ion diffusion channels and high electrochemically active surface area. The symmetric SC with commercial-level mass loading electrodes (∼12 mg cm⁻²) offered a high specific capacitance (314.6 F g⁻¹) and energy density (21.1 W h kg⁻¹ at 150 W kg⁻¹) at a wide operating voltage of 1.5 V. Moreover, the SC exhibits no loss of capacitance after 5000 charge−discharge cycles showcasing excellent cycle life.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

Solution processable reduced graphene oxide decorated ATO electrode for organic solar cells

A novel concept based on the use of solutions containing already qualified crystalline antimony-doped tin oxide SnO₂:Sb (ATO) nanoparticles has been developed. ATO nanoparticles are decorated by reduced graphene oxide (rGO) through a hydrothermal synthesis method. The electrical and optical properties of the graphene oxide films are investigated systematically. The sheet resistance (R _□) of the ATO–rGO films decreases with the increase in the rGO content in the precursor solution. The R _□ can be decreased after the ATO–rGO films annealing in the air for 1 h and can be further decreased by depositing Au on the surface of the films. The optimum property of the ATO–rGO film shows that the R _□ is 80 Ω/□ and the transmittance is about 70 %. The ATO–rGO films are used as the anode of the organic solar cells. The anode film impact on the performance of the devices is studied. Finally, the power conversion efficiency (PCE) of the device based on the poly-(3-hexylthiophene): [6, 6]-phenyl C61-butyric acid methyl ester (PCBM) blended is 1.85 %, and the PCE of the device based on the poly-benzo[1,2-b:4,5-b′] dithio-phene thieno[3,4-b] thiophene:PCBM blended is 3.4 %.     

Synthesis of RGO/Cu8S5/PPy Composite Nanosheets with Enhanced Peroxidase‐Like Activity for Sensitive Colorimetric Detection of H2O2 and Phenol

In this paper, a novel strategy for the fabrication of reduced graphene oxide (rGO)/Cu₈S₅/polypyrrole (PPy) composite nanosheets with Cu₈S₅ nanoparticles and PPy layer anchored on the surface of rGO as peroxidase‐like nanocatalyst is reported. During the synthesis, graphene oxide (GO)/CuO composite nanosheets are prepared first and used as templates, then the sulfuration of CuO and polymerization of pyrrole are accompanied with the reduction of GO, resulting in ternary rGO/Cu₈S₅/PPy composite nanosheets. The synthesized Cu₈S₅ nanoparticles with a diameter in the range from tens to hundreds of nanometers are dispersed within PPy decorated rGO nanosheets. The resultant ternary rGO/Cu₈S₅/PPy composite nanosheets exhibit a higher peroxidase‐like catalytic activity toward the oxidation of 3,3′,5,5′‐tetramethylbenzidine in the presence of H₂O₂ than GO/CuO and rGO/CuS composite nanosheets, revealing a synergistic effect on their activity. The as‐prepared rGO/Cu₈S₅/PPy platform provides a simple colorimetric approach for the detection of H₂O₂ and phenol with a high sensitivity. This work offers a new way for the fabrication of rGO‐based nanocomposite with superior enzyme‐like activity, which displays great potential applications in biocatalysis and environmental monitoring.     

A Highly Effective,Stable Oxygen Evolution Catalyst Derived from Transition Metal Selenides and Phosphides

Recently, transition metal chalcogenides and phosphides have been increasingly reported as efficient and stable oxygen evolution reaction (OER) catalysts in alkaline medium, despite the fact that they are thermodynamically unstable under highly oxidative potentials. Here the active forms of these materials are elucidated by synthesizing a hybrid catalyst, which has a metal chalcogenide in the form of CoSe₂ and metal phosphide in the form of CoP—CoSe₂|CoP. Both CoSe₂ and CoP in the as‐prepared catalyst are completely transformed into their respective oxyhydroxides and hydroxides, which are, in fact, the true OER‐active species in alkaline medium and not the selenide and phosphide themselves. The derived oxides from the hybrid catalyst deliver an excellent OER activity by reaching a current density of 10 mA cm⁻² at a low overpotential of 240 mV (vs reversible hydrogen electrode (RHE)) and a Tafel slope of 46.6 mV dec⁻¹. The stability of the derived oxyhydroxide/hydroxide catalyst shows no appreciable deactivation during 120 h of continuous electrolysis, displaying an extraordinary operational stability.     

Liquid Crystalline Dispersions of Graphene‐Oxide‐Based Hybrids: A Practical Approach towards the Next Generation of 3D Isotropic Architectures for Energy Storage Applications

We report the use of the spray pyrolysis method to design self‐assembled isotropic ternary architectures made up of reduced graphene oxide (GO), functionalized multiwalled carbon nanotubes, and nickel oxide nanoparticles for cost‐effective high‐performance supercapacitor devices. Electrodes fabricated from this novel ternary system exhibit exceptionally high capacitance (2074 Fg^?1) due to the highly conductive network, synergistic link between GO and carbon nanotubes and achieving high surface area monodispersed NiO decorated rGO/CNTs composite employing the liquid crystallinity of GO dispersions. To further assess the practicality of this material for supercapacitor manufacture, we assembled an asymmetric supercapacitor device incorporating activated carbon as the anode. The asymmetric supercapacitor device showed remarkable capacity retention (>96%), high energy density (23 Wh kg^?1), and a coulombic efficiency of 99.5%.     

Three‐Dimensional Multilayer Assemblies of MoS2/Reduced Graphene Oxide for High‐Performance Lithium Ion Batteries

Three‐dimensional (3D) multilayer molybdenum disulfide (MoS₂)/reduced graphene oxide (RGO) nanocomposites are prepared by a solution‐processed self‐assembly based on the interaction using different sizes of MoS₂ and GO nanosheets followed by in situ chemical reduction. 3D multilayer assemblies with MoS₂ wrapped by large RGO nanosheets and good interface are observed by transmission electron microscopy. The interaction of Na⁺ ions with oxygen‐containing groups of GO is also investigated. The measurement of lithium ion batteries (LIBs) shows that MoS₂/RGO anode nanocomposite with a weight ratio of MoS₂ to GO of 3:1 exhibits an excellent rate performance of 750 mAh g^?1 at 3 A g^?1 outperforming many previous studies and a high reversible capacity up to ≈1180 mAh g^?1 after 80 cycles at 100 mA g^?1. Good rate performance and high capacity of MoS₂/RGO with 3D unique layered‐structures are attributed to the combined effects of continuous conductive networks of RGO, good interface facilitating charge transfer, and strong RGO sheets preventing the volume expansion. Results indicate that 3D multilayer MoS₂/RGO prepared by a facile solution‐processed assembly can be developed to be an excellent nanoarchitecture for high‐performance LIBs.