Y‐shaped diblock copolymer with epoxy‐based block of poly(glycidyl methacrylate): Synthesis,characterization, and its morphology study

A Y‐shaped diblock copolymer with a functional block poly(glycidyl methacrylate) was synthesized via the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). The synthetic procedure involved eROP of ε‐caprolactone (ε‐CL) in the presence of biocatalyst Novozyme 435 and initiator 1H,1H,2H,2H‐perfluoro‐1‐octaoxy, subsequently the resulting poly(ε‐caprolactone) (PCL) was converted to a macroinitiator by esterification of it with 2,2‐dichloro acetyl chloride, and finally the ATRP of glycidyl methacrylate (GMA) was conducted at 60 °C with CuCl/2,2′‐bipyridine as the catalyst system. By this process, we obtained copolymers with a controlled molecular weight and a low polydispersity. The structure and composition of the obtained polymers were characterized by H NMR, GPC, and IR. Linear first‐order kinetics, linearly increased molecular weight with conversion, and low polydispersities were observed for the ATRP of GMA. The thermal properties of the copolymer were characterized by differential scanning calorimetry. The self‐assembly behavior of the Y‐shaped block copolymer was also investigated in different solvents and at different concentrations. The aggregates of various morphologies (spheres, worm‐like patterns, nanowell patterns, and dendritic patterns) were observed. It was found that solvents remarkably influenced the morphologies of the films spin‐coated from the corresponding solutions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5509–5526, 2009     

Self‐assembly of N‐carboxyethylchitosan near the isoelectric point

For the first time the possibility to obtain nanostructures by self‐assembly of chitosan polyampholytic derivative was demonstrated. The self‐assembly of N‐carboxyethylchitosan (CECh) took place only near its isoelectric point (pH 5.0–5.6). Out of the pH range 5.0–5.6, CECh aqueous solutions behaved as real solutions. Dynamic light scattering and atomic force microscopy analyses revealed that spherically shaped or rod/worm‐like nanosized assemblies were formed depending on the polymer molar mass, pH value, and polymer concentration. CECh of two different molar masses was studied in concentrations ranging from 0.01 to 0.1 mg/mL. The structures from CECh of weight‐average molar mass (M_w ) 4.5 × 10³ g/mol were spherical regardless the pH and polymer concentration. In contrast, CECh of high molar mass (HMMCECh, M_w = 6.7 × 10⁵ g/mol) formed self‐assemblies with spherical shape only at pH 5.0 and 5.6. At pH 5.2 spherical nanoparticles were obtained only at polymer concentration 0.01 mg/mL. The mean hydrodynamic diameter (D_h) of the obtained nanoparticles was in the range from 30 to 980 nm. On increasing the concentration, aggregation of the nanoparticles appeared, and at HMMCECh concentration 0.1 mg/mL, rod/worm‐like structures were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6712–6721, 2008     

Functionalized PEG‐b‐PAGE‐b‐PLGA triblock terpolymers as materials for nanoparticle preparation

A series of poly(ethylene glycol)‐block‐poly(allyl glycidyl ether) (PEG‐b‐PAGE) macroinitiators are prepared using the living anionic ring‐opening polymerization (AROP) technique, and applied for further copolymerization studies. To overcome the low reactivity of the secondary hydroxyl end‐group of the PAGE block, a primary hydroxyl group is introduced into the macroinitiators via trityl and tert‐butyl‐dimethylsilane protective groups. The modified macroinitiators are used for copolymerization by applying different amounts of PEG‐b‐PAGE (5, 10, and 15%) and different PLGA lengths. To study their properties, nanoparticles from selected polymers are prepared and characterized by dynamic light scattering and scanning electron microscopy showing spherical particles with diameters around 200 nm and low PDI_particle values of 0.03–0.1. An advantage of the obtained polymers is the presence of double bonds in the side chain, which enables the modification via, for example, thiol‐ene reactions. For this purpose tertiary 2‐(dimethylamino)ethanethiol), acetylated thiogalactose and thiomannose are attached onto the double bonds of the PAGE‐blocks. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2163–2174     

Synthesis of linear and star‐like poly(ε‐caprolactone)‐b‐poly{γ‐2‐[2‐(2‐methoxy‐ethoxy)ethoxy]ethoxy‐ε‐caprolactone} amphiphilic block copolymers using zinc undecylenate

Linear and star‐like amphiphilic diblock copolymers were synthesized by the ring‐opening polymerization of ε‐caprolactone and γ‐2‐[2‐(2‐methoxyethoxy)ethoxy]ethoxy‐ε‐caprolactone monomers using zinc undecylenate as a catalyst. These polymers have potential applications as micellar drug delivery vehicles, therefore the properties of the linear and 4‐arm star‐like structures were examined in terms of their molecular weight, viscosity, thermodynamic stability, size, morphology, and drug loading capacity. Both the star‐like and linear block copolymers showed good thermodynamic stability and degradability. However, the star‐like polymers were shown to have increased stability at lower concentrations with a critical micelle concentration (CMC) of 5.62 × 10^?4 g L^?1, which is less than half the concentration of linear polymer needed to form micelles. The star‐like polymeric micelles showed smaller sizes when compared with their linear counterparts and a higher drug loading capacity of doxorubicin, making them better suited for drug delivery purposes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3601–3608     

Supramolecular assembly of H‐bonded side‐chain polymers containing conjugated pyridyl H‐acceptor pendants and various low‐band‐gap H‐donor dyes bearing cyanoacrylic acid groups for organic solar cell applications

Novel supramolecular side‐chain polymers were constructed by complexation of proton acceptor (H‐acceptor) polymers, i.e., side‐chain conjugated polymers P1–P2 containing pyridyl pendants, with low‐band‐gap proton donor (H‐donor) dyes S1–S4 (bearing terminal cyanoacrylic acids) in a proper molar ratio. Besides unique mesomorphic properties confirmed by DSC and XRD results, the H‐bonds of supramolecular side‐chain structures formed by pyridyl H‐acceptors and cyanoacrylic acid H‐donors were also confirmed by FTIR measurements. H‐donor dyes S1–S4 in solid films exhibited broad absorption peaks located in the range of 471–490 nm with optical band‐gaps of 1.99–2.14 eV. Furthermore, H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 exhibited broad absorption peaks in the range of 440–462 nm with optical band‐gaps of 2.11–2.25 eV. Under 100 mW/cm² of AM 1.5 white‐light illumination, the bulk heterojunction polymer solar cell (PSC) devices containing an active layer of H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 (as electron donors) mixed with [6,6]‐phenyl C₆₁ butyric acid methyl ester (i.e., PCBM, as an electron acceptor) in the weight ratio of 1:1 were investigated. The PSC device containing H‐bonded polymer complex P1/S3 mixed with PCBM (1:1 w/w) gave the best preliminary result with an overall power conversion efficiency (PCE) of 0.50%, a short‐circuit current of 3.17 mA/cm², an open‐circuit voltage of 0.47 V, and a fill factor of 34%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5998–6013, 2009     

Morphological switching of unimolecular micelles of ternary graft copolymers in different solvents

A series of ternary graft copolymers with poly(3‐azido‐2‐hydroxypropyl methacrylate) (P(GMA‐N₃)) as the main chain, end‐functionalized poly(ethylene glycol) methyl ether (MPEG), poly(t‐butyl acrylate) (PtBA), and poly(2‐cinnamoyloxyethyl methacrylate) (PCEMA) as the side‐chains, was synthesized via the combination of atom transfer radical polymerization (ATRP) and click chemistry. The formation of well‐defined ternary graft copolymers was confirmed by both size exclusion chromatography (SEC) and ¹H NMR spectroscopy The loose and worm‐like morphology of the ternary graft copolymer in a common solvent (N,N‐dimethylformamide) for both the backbone and the grafts was directly visualized via atomic force microscopy (AFM). The average height, width, and length of these solvated macromolecules were about 1.5, 17, and 45 nm, respectively. The ternary graft copolymers underwent self‐assembly in different selective solvents (dichloromethane, methanol, and water) and thus yielded unimolecular micelles (UMs) with different morphologies. The morphological transitions in response to variations in the selective solvents was investigated by AFM as well as/or transmission electron microscopy (TEM). Experimental results showed that the micellar morphology of the ternary graft copolymer changed from a pearl‐necklace to a worm‐like structure and then to a spherical structure when the selective solvent was respectively changed from CH₂Cl₂ to CH₃OH and then to H₂O. SEC characterization revealed that the compact globules formed in H₂O with PCEMA/PtBA as the hydrophobic core arose due to intramolecular folding. Thus, multicompartment UMs were generated. The volume ratio of the multicompartment UMs formed in H₂O was in close agreement with their molecular weight ratio. The hydrodynamic diameters (D_h) of the acquired multicompartment UMs and their polydispersity indices were characterized by dynamic light scattering. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1021–1030     

Synthesis and characterization of low‐bandgap copolymers based on dihexyl‐2h‐benzimidazole and cyclopentadithiophene

A series of new semiconducting polymers based on 4,4‐dihexyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene, 2,2‐dihexyl‐2H‐benzimidazole, and thiophene units was synthesized. The polymers show good solubility at room temperature in organic solvents owing to long alkyl chain in new acceptor, 2,2‐dihexyl‐2H‐benzimidazole. The advantage of dihexyl‐2H‐benzimidazole compared to the benzothiadiazole is to improve the solubility of the polymer. It was found that these polymers can finely be tuned for photovoltaic application by adjusting the contents ratio of the dihexyl‐2H‐benzimidazole unit. The spectra of the solid films show absorption bands with maximum peaks in the range of 421–577 nm and the absorption onsets at 588–683 nm, corresponding to band gaps of 2.11–1.82 eV. The devices with PCPDTDTHBI‐1 :PC₇₁BM showed an open‐circuit voltage (V_OC) of 0.46 V, a short‐circuit current density (J_SC) of 3.83 mA/cm², and a fill factor of 0.36, giving a power conversion efficiency of 0.64%. Decrease of the dihexyl‐2H‐benzimidazole contents in the polymers induced red‐shift of the UV absorptions, and increased V_OC and J_SC values, to improve the efficiency of organic photovoltaics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Thiol–ene polymerizations using imide‐based monomers

New diene and dithiol monomers, based on aromatic imides such as benzophenone‐3,3′,4,4′‐tetracarboxylic diimide were synthesized and used in thiol‐ene polymerizations which yield poly(imide‐co‐thioether)s. These linear polymers exhibit limited solubility in various organic solvents. The molecular weights of the polymers were found to decrease with increasing imide content. The glass transition temperature (T_g) of these polymers is dependent on imide content, with T_g values ranging from ?55 °C (with no imide) up to 13 °C (with 70% imide). These thermal property improvements are due to the H‐bonding and rigidity of the aromatic imide moieties. Thermal degradation, as studied by thermogravimetric analysis, was not significantly different to the nonimide containing thiol‐ene polymers made using trimethyloylpropane diallyl ether and 3,5‐dioxa‐1,8‐dithiooctane. It is expected that such monomers may lead to increased glass transition temperatures in other thiol‐ene polymer systems as these normally exhibit low glass transition temperatures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4637–4642     

Using glycidyl methacrylate as cross‐linking agent to prepare thermosensitive hydrogels by a novel one‐step method

A novel one‐step approach is reported to prepare thermosensitive hydrogels simply by using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD)/glycidyl methacrylate (GMA)/N‐isopropylacrylamide (NIPAM) system. From GMA and HP‐β‐CD, HP‐β‐CD/GMA inclusion complex was prepared and identified with NMR, FTIR, and UV‐vis spectroscopies. GMA in the form of HP‐β‐CD/GMA complex was copolymerized with NIPAM in water with K₂S₂O₈ as initiator, yielding hydrogels designated as poly(NIPAM‐CD‐GMA). The inclusion of CD in the hydrogels was confirmed by FTIR spectroscopy. The contents of CD and GMA placed considerable influence on the swelling ratio and temperature‐sensitivity of the produced hydrogels. The hydrogels bearing CD moieties showed higher swelling ratio and temperature‐sensitivity when compared with that without CD. The porous structure of the hydrogels containing CD was observed in the SEM images. Relevant mechanism of the ring‐opening reaction of epoxide groups in GMA, the subsequent crosslinking reactions and the formation of hydrogels containing CD moieties were proposed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2193–2201, 2008     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Synthesis of maltopentaose‐conjugated surface‐active styrenic monomers and their micellar homopolymerization in water

Maltopentaose (Mal₅)‐conjugated surface‐active styrenic monomers 1a , 1b , and 1c are described, which contain hydrophobic spacers, such as C1, C5, and C7 alkylene chains, respectively. The glycomonomers 1a‐c were synthesized by the direct β‐N‐glycosyl reaction of styrene derivatives with aminoalkyl groups 4a‐c onto Mal₅ in dry methanol, followed by the N‐acetylation with acetic anhydride. The self‐assembling properties for the aqueous solutions of 1a‐c were characterized by surface tension measurements and light scattering experiments, providing the physicochemical parameters for the formed 1a‐c micelles including the critical micelle concentration, apparent hydrodynamic radius (R_h,app), and weight average aggregation number (N_agg). The transmission electron microscope observations revealed the most important result in this study that 1a produced loose spherical micelles with the number average diameter (d_n) of 26 nm, while both 1b and 1c formed worm‐like micelles with the polymerizable core and the Mal₅ shell, whose number average contour lengths (l_ns) were 130 nm and 68 nm, respectively. The radical homopolymerizations of 1a‐c in water provided a substantial result in this study that 1b and 1c , that is, the glycomonomers forming the worm‐like micelles, showed a very high homopolymerizability in water. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1671–1679     

Triallyl monomer bearing adamantane‐like core derived from naturally occurring myo‐inositol: Synthesis and polyaddition with dithiols

This paper deals with a triallyl monomer bearing a rigid adamantane‐like core derived from myo‐inositol, a naturally occurring cyclic hexaol. The core structure of the monomer can be readily constructed by orthoesterification of myo‐inositol. The polyaddition of the triallyl monomer with dithiols based on the thermally induced radical thiol‐ene reaction gives the corresponding networked polymers. These networked polymers exhibit much higher thermal stability than the comparative networked polymers obtained from a triallyl monomer bearing less rigid cyclohexyl core. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1193–1199     

Proton conduction in 1H‐1,2,3‐triazole polymers: Imidazole‐like or pyrazole‐like?

Proton transport (PT) plays an important role in many biological processes as well as in materials for renewable energy devices. Gaining insights into functional group requirements for PT would aid the design of new materials that provide enhanced proton conduction. In this report, we outline our efforts to understand the most probable proton conduction pathway in 1H‐1,2,3‐triazole systems. In triazole‐based systems, both imidazole‐ and pyrazole‐like pathways are possible. By systematically comparing structurally analogous polymers based on N‐heterocycles and benz‐N‐heterocycles, we find that the imidazole‐like pathway makes a significant contribution to the proton transfer in 1H‐1,2,3‐triazole systems, while the contribution from pyrazole‐like pathway is negligible. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1851–1858, 2010     

Temperature‐Induced Transformation from Large Compound Vesicles to Worm‐like Aggregates by ABC Triblock Copolymer

Two triblock polymers, tetraaniline‐block‐poly(N‐isopropyl acrylamide)‐block‐poly(hydroxyethyl acrylate) (TA‐b‐PNIPAM‐b‐PHEA) and TA‐b‐PHEA‐b‐PNIPAM, were synthesized with unambiguous structure by a two step method. The difference of these two diblock polymers is the connection order of carboxyl group to block, e.g., carboxyl group to PNIPAM block for PNIPAM‐b‐PHEA and to PHEA block for PHEA‐b‐PNIPAM. Secondly, block tetraaniline was linked to the diblock polymer through amidation to yield the corresponding triblock copolymer. Both of them have almost the identical chemical compositions. The only difference is the connection order of each block in the triblock polymers. When they were self‐assembled at 45°C in a suitable solution, both of their aggregates have spherical shape with slight defects on their surface with the average diameter of about 400 nm. However, when their aggregate dispersion was cooled down to 20°C, only TA‐b‐PHEA‐b‐PNIPAM's morphology changed, forming worm‐like aggregates with the diameter of about 100–200 nm transformed from spherical aggregates. Both amphiphilic property and position of each block in this triblock copolymer are very essential for this morphology transformation. Since the worm‐like aggregates presented here by our group have hollow structure inside, its controlled release properties for doxorubicin were evaluated. Drug release experiment indicated that along with the temperature changes, the rearrangement of the intermediate layer structure caused morphology change in aggregate, thus accelerating the speed of drug release.     

Synthesis and properties of blue light‐emitting,silicon‐containing,regio‐ and stereoregular conjugated polymers

This article concerns the hydrosilylation polyaddition of 1,4‐bis(dimethylsilyl)benzene ( 1 ) with 4,4′‐diethynylbiphenyl, 2,7‐diethynylfluorene ( 2b ), and 2,6‐diethynylnaphthalene with RhI(PPh₃)₃ catalyst. Trans‐rich polymers with weight‐average molecular weights (M_w's) ranging from 19,000 to 25,000 were obtained by polyaddition in o‐Cl₂C₆H₄ at 150–180 °C, whereas cis‐rich polymers with M_w's from 4300 to 34,000 were obtained in toluene at 0 °C–r.t. These polymers emitted blue light in 4–81% quantum yields. The cis polymers isomerized into trans polymers upon UV irradiation, whereas the trans polymers did not. The device having a layer of polymer trans‐ 3b obtained from 1 and 2b demonstrated electroluminescence without any dopant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2774–2783, 2004     

Synthesis and in vitro activity of platinum containing 2‐oxazoline‐based glycopolymers

We report the synthesis of glyco(poly(2‐oxazoline)s) functionalized with Pt(II) units for targeted tumor applications. To this end, poly(2‐ethyl‐2‐oxazoline‐block‐2‐(3‐butenyl)‐2‐oxazoline) is modified with thiol‐modified acetyl protected glucose and galactose, respectively, and terpyridine (tpy) units using thiol‐ene photoaddition. Deprotection of the sugars with sodium methoxide and treatment with Pt(COD)Cl₂ applying a mild synthesis route yields polymers with monosaccharide targeting moieties and cytotoxic Pt(II) units. The polymers and intermediates are characterized by ¹H nuclear magnetic resonance spectroscopy and size exclusion chromatography. Subsequently, the hemolytic activity, induction of erythrocyte aggregation as well as the cytotoxicity against mouse fibroblast L929 cells, human embryonic kidney cells HEK 293, and human hepatocytes HepG2 are studied. The comparison to cisplatin, the standard for cancer therapy, demonstrates the potential of the presented system. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2703–2714     

Acyl guanidine functional poly(2‐oxazoline)s as reactive intermediates and stimuli‐responsive materials

The many postpolymerization modification opportunities of biocompatible poly(2‐alkyl/aryl‐2‐oxazoline)s (PAOx), such as thiol–ene/thiol–yne, azide–alkyne cycloadditions, amidation, and transesterification, are one of the most appealing features of this polymer class for its popularity in biomedicine. Inspired by recent reports on guanidine‐catalyzed transesterification and amidation reactions of methyl ester substrates, we explored the use of guanidines as a reactant for the modification of methyl ester functional PAOx, to obtain the respective acyl guanidines. The obtained acyl guanidines functional polymers display reactivity toward α‐haloketones, yielding imidazole functional PAOx. The obtained polymer structures are protonated in a broad pH range, and the acyl guanidine moiety is demonstrated to be a cleavable linker under basic conditions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2616–2624     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Two new CdII and ZnII coordination polymers incorporating 1‐aminobenzene‐3,4,5‐tricarboxylic acid: synthesis,crystal structure and characterization

Aminobenzoic acid derivatives are widely used in the preparation of new coordination polymers since they contain O‐atom donors, as well as N‐atom donors, and have a rich variety of coordination modes which can lead to polymers with intriguing structures and interesting properties. Two new coordination polymers incorporating 1‐aminobenzene‐3,4,5‐tricarboxylic acid (H₃abtc), namely, poly[(μ₃‐1‐amino‐5‐carboxybenzene‐3,4‐dicarboxylato)diaquacadmium(II)], [Cd(C₉H₅NO₆)(H₂O)₂]_n, (I), and poly[[bis(μ₅‐1‐aminobenzene‐3,4,5‐tricarboxylato)triaquatrizinc(II)] dihydrate], {[Zn₃(C₉H₄NO₆)₂(H₂O)₃]·2H₂O}_n, (II), have been prepared and structurally characterized by single‐crystal X‐ray diffraction. In polymer (I), each tridentate 1‐amino‐5‐carboxybenzene‐3,4‐dicarboxylate (Habtc^2?) ligand coordinates to three Cd^II ions to form a two‐dimensional network structure, in which all of the Cd^II ions and Habtc^2? ligands are equivalent, respectively. Polymer (II) also exhibits a two‐dimensional network structure, in which three crystallographically independent Zn^II ions are bridged by two crystallographically independent pentadentate 1‐aminobenzene‐3,4,5‐tricarboxylate (abtc^3?) ligands. This indicates that changing the metal ion can influence the coordination mode of the H₃abtc‐derived ligand and further influence the detailed architecture of the polymer. Moreover, the IR spectra, thermogravimetric analyses and fluorescence properties were investigated.     

2,6‐Diaminopyridine and Acrylamide‐Based Copolymers with Upper Critical Solution Temperature‐type Behavior in Aqueous Solution

A novel copolymer based on supramolecular motif 2,6‐diaminopyridine and water‐soluble acrylamide, poly[N‐(6‐acetamidopyridin‐2‐yl) acrylamide‐co‐acrylamide], was synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization with various monomer compositions. The thermoresponsive behavior of the copolymers was studied by turbidimetry and dynamic light scattering (DLS). The obtained copolymers showed an upper critical solution temperature (UCST)‐type phase transition behavior in water and electrolyte solution. The phase transition temperature was found to increase with decreasing amount of acrylamide in the copolymer and increasing concentration of the solution. Furthermore, the phase transition temperature varied in aqueous solutions of electrolytes according to the nature and concentration of the electrolyte in accordance with the Hoffmeister series. A dramatic solvent isotope effect on the transition temperature was observed in this study, as the transition temperature was almost 10–12 °C higher in D₂O than in H₂O at the same concentration and acrylamide composition. The size of the aggregates below the transition temperature was larger in D₂O compared to that in H₂O that can be explained by deuterium isotope effect. The thermoresponsive behavior of the copolymers was also investigated in different cell medium and found to be exhibited UCST‐type phase transition behavior in different cell medium. Such behavior of the copolymers can be useful in many applications including biomedical, microfluidics, optical materials, and in drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2064–2073