Coupling effects of high temperature and pressure on the decomposition mechanisms of 1,1-diamino-2,2-dinitroehethe crystal: Ab initio molecular dynamics simulations

Recently, Dreger et al. experimentally investigated the phase diagram and decomposition of 1,1-diamino-2,2-dinitroethene (FOX-7) single crystal compressed hydrostatically up to 10 GPa and heated over a range of 293–750 K (J. Phys. Chem. C 2016 , 120, 11092–11098). As a continuation, we performed ab initio molecular dynamic simulations to study the initiation mechanisms and subsequent decomposition of FOX-7 at a temperature of 504 K (initial decomposition temperature) coupled with a pressure of 1–5 GPa, 604 K at 5GPa, and 704 K at 5 GPa. However, our two compressing ways are different: the former is static hydrostatical compression, while our way is dynamic compression. Our results indicate that the initial decomposition mechanism was dependent on the temperature but independent of the pressure. The initial decomposition step is the bimolecular intermolecular hydrogen transfer. The subsequent decomposition of FOX-7 is sensitive to both the temperature and pressure. At 504 K, the decomposition of FOX-7 was accelerated from 1 to 2 GPa and from 3 to 5 GPa but decelerated from 2 to 3 GPa. The temperature exhibits a positive effect on the decomposition. Overall, the temperature and pressure have great cooperative effects on the decomposition of FOX-7. Our study may provide new insight into understanding the initial mechanisms and decomposition reactions of energetic materials at relatively low temperatures coupled with different pressures in atomic detail.     

New theoretically predicted RDX‐ and β‐HMX‐based high‐energy‐density molecules

Theoretically new high‐energy‐density materials (HEDM) in which the hydrogens on RDX and β‐HMX (hexahydro‐1,3,5‐trinitro‐1,3,5‐triazine and octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine, respectively) were sequentially replaced by (N NO₂)x functional groups were designed and evaluated using density functional theory calculations in combination with the Kamlet–Jacobs equations and an atoms‐in‐molecules (AIM) analysis. Improved detonation properties and reduced sensitivity compared to RDX and β‐HMX were predicted. Interestingly, the RDX and β‐HMX derivatives having one attached N NO₂ group [RDX‐(NNO₂)1 and HMX‐(NNO₂)1] showed excellent detonation properties (detonation velocities: 9.529 and 9.575 km·s⁻¹, and detonation pressures: 40.818 and 41.570 GPa, respectively), which were superior to the parent compounds. Sensitivity estimations obtained by calculating impact sensitivities and HOMO‐LUMO gaps indicated that RDX‐(NNO₂)1 and HMX‐(NNO₂)1 were less stable than RDX and HMX but more stable than any of the other derivatives. This method of sequential NNO₂ group attachment on conventional HEDMs offers a firm basis for further studies on the design of new explosives. Furthermore, the newly found structures may be promising candidates for better HEDMs.     

Synthesis and properties of fluorinated polyimides from a new unsymmetrical diamine: 1,4‐(2′‐Trifluoromethyl‐4′,4′‐diaminodiphenoxy)benzene

A new aromatic, unsymmetrical ether diamine with a trifluoromethyl pendent group, 1,4‐(2′‐trifluoromethyl‐4′,4″‐diaminodiphenoxy)benzene, was successfully synthesized in three steps with hydroquinone as a starting material and polymerized with various aromatic tetracarboxylic acid dianhydrides, including 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, 2,2′‐bis(3,4‐dicarboxyphenyl)‐hexafluoropropane dianhydride, and pyromellitic dianhydride, via a conventional two‐step thermal or chemical imidization method to produce a series of fluorinated polyimides. The polyimides were characterized with solubility tests, viscosity measurements, IR, ¹H NMR, and ¹³C NMR spectroscopy, X‐ray diffraction studies, and thermogravimetric analysis. The polyimides had inherent viscosities of 0.56–0.77 dL/g and were easily dissolved in both polar, aprotic solvents and common, low‐boiling‐point solvents. The resulting strong and flexible polyimide films exhibited excellent thermal stability, with decomposition temperatures (at 5% weight loss) above 522 °C and glass‐transition temperatures in the range of 232–272 °C. Moreover, the polymer films showed outstanding mechanical properties, with tensile strengths of 74.5–121.7 MPa, elongations at break of 6–13%, and initial moduli of 1.46–1.95 GPa, and good dielectric properties, with low dielectric constants of 1.82–2.53 at 10 MHz. Wide‐angle X‐ray diffraction measurements revealed that these polyimides were predominantly amorphous. These outstanding combined features ensure that the polymers are desirable candidate materials for advanced microelectronic applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6836–6846, 2006     

NO2, OH和OH-对环四甲撑四硝胺初始热解的影响

在密度泛函理论的(DFT)B3LYP/6-31g(d)水平上, 优化得到了环四甲撑四硝胺(β-HMX)及其与高氯酸铵(AP)裂解产物NO2、OH及OH-分别形成复合物的各种稳定构型, 计算了β-HMX及各复合物中最弱的N—NO2键解离能. 结果发现: β-HMX与NO2、OH结合后构型变化不是很大, 但对称性降低; β-HMX与OH-结合后, HMX构型发生较大变化, 原有的对称性明显遭到破坏. 计算表明: NO2易与HMX骨架环上亚甲基(—CH2—)中的H作用,“置换”出H而引发HMX的热解, 从而改变了HMX的初始分解通道; OH对HMX的N—NO2键解离影响不大, 而OH-与β-HMX结合后其N—NO2键解离能比β-HMX降低近200 kJ·mol-1, 表明OH-对其裂解有明显的促进作用. NO2、OH-的存在可使HMX的分解温度大大降低.     

The Local Atomic Structures of Liquid CO at 3.6 GPa and Polymerized CO at 0 to 30 GPa from High‐Pressure Pair Distribution Function Analysis

The local atomic structures of liquid and polymerized CO and its decomposition products were analyzed at pressures up to 30 GPa in diamond anvil cells by X‐ray diffraction, pair distribution function (PDF) analysis, single‐crystal diffraction, and Raman spectroscopy. The structural models were obtained by density functional calculations. Analysis of the PDF of a liquid CO‐rich phase revealed that the local structure has a pronounced short‐range order. The PDFs of polymerized amorphous CO at several pressures revealed the compression of the molecular structure; covalent bond lengths did not change significantly with pressure. Experimental PDFs could be reproduced with simulations from DFT‐optimized structural models. Likely structural features of polymerized CO are thus 4‐ to 6‐membered rings (lactones, cyclic ethers, and rings decorated with carbonyl groups) and long bent chains with carbonyl groups and bridging atoms. Laser heating polymerized CO at pressures of 7 to 9 GPa and 20 GPa resulted in the formation of CO₂.     

Energetic Oxygen‐Containing Tetrazole Salts Based on 3,4‐Diaminotriazole

Energetic mono‐ and dicationic 3,4‐diaminotriazolium salts have been prepared by combining stoichiometric amounts (1:1 or 2:1 molar ratio) of 3,4‐diaminotriazole with various oxygen‐containing tetrazoles, and the structures have been confirmed by single‐crystal XRD for the first time. All structures are dominated by a strong hydrogen‐bond network owing to both amino groups and oxygen in the molecule. All salts, except 7 , exhibit excellent thermal stabilities with decomposition temperatures over 200 °C. Based on experimental densities and theoretical calculations carried out by using the Gaussian 03 suite of programs, all salts have calculated detonation pressures (20.3–33.9 GPa) and velocities (7095–8642 m s^?1).     

Synthesis and Promising Properties of a New Family of High‐Nitrogen Compounds: Polyazido‐ and Polyamino‐Substituted N,N′‐Azo‐1,2,4‐triazoles

A new family of high‐nitrogen compounds, that is, polyazido‐ and polyamino‐substituted N,N′‐azo‐1,2,4‐triazoles, were synthesized in a safe and convenient manner and fully characterized. The structures of 3,3′,5,5′‐tetra(azido)‐4,4′‐azo‐1,2,4‐triazole ( 15 ) and 3,3′,5,5′‐tetra(amino)‐4,4′‐azo‐1,2,4‐triazole ( 23 ) were also confirmed by X‐ray diffraction. Differential scanning calorimetry (DSC) was performed to determine their thermal stability. Their heats of formation and density, which were calculated by using Gaussian 03, were used to determine the detonation performances of the related compounds (EXPLO 5.05). The heats of formation of the polyazido compounds were also derived by using an additive method. Compound 15 has the highest heat of formation (6933 kJ kg^?1) reported so far for energetic compounds and a detonation performance that is comparable to that of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX), while compound 23 has a decomposition temperature of up to 290 °C.     

Structure and Isotope Effects of the β‐H Agostic (α‐Diimine)Nickel Cation as a Polymerization Intermediate

Single‐crystal X‐ray characterization of cationic (α‐diimine)Ni‐ethyl and isopropyl β‐agostic complexes, which are key intermediates in olefin polymerization and oligomerization, are presented. The sharp Ni‐C_α‐C_β angles (75.0(3)° and 74.57(18)°) and short C_α−C_β distances (1.468(7) and 1.487(5) Å) provide unambiguous evidence for a β‐agostic interaction. An inverse equilibrium isotope effect (EIE) for ligand coordination upon cleavage of the agostic bond highlights the weaker bond strength of Ni−H relative to the C−H bond. An Eyring plot for β‐hydride elimination–olefin rotation–reinsertion is constructed from variable‐temperature NMR spectra with ¹³C‐labeled agostic complexes. The enthalpy of activation (ΔH ^≠) for β‐H elimination is 13.2 kcal mol⁻¹. These results offer important mechanistic insight into two critical steps in polymerization: ligand association upon cleavage of the β‐agostic bonds and chain‐migration via β‐H elimination.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Die Hydroaluminierung von 1,1,4,4‐Tetramethyl‐2,3‐diazabutadien mit Dialkylaluminiumhydriden – Synthese von Dialkylaluminiumhydrazoniden

The Hydroalumination of 1,1,4,4‐Tetramethyl‐2,3‐diazabutadiene by Dialkylaluminium Hydrides – Synthesis of Dialkylaluminium Hydrazonides 1,1,4,4‐Tetramethyl‐2,3‐diazabutadiene reacted with dimethylaluminium hydride by hydroalumination of only one C=N double bond. The hydrazone derivative [Me₂Al–N(CHMe₂)–N=CMe₂]₂ ( 1 ) was formed which gave a dimer possessing a six‐membered Al₂N₄ heterocycle. The hydroalumination of both C=N double bonds was not observed. Also an excess of di(tert‐butyl)‐ or bis(trimethylsilylmethyl)aluminium hydride afforded only the product of a single hydroalumination step, a second dialkylaluminium hydride molecule was attached via a coordinative interaction between its central aluminium atom and the nitrogen atom of the C=N double bond and in addition via a 3 c‐2 e Al–H–Al bond. Compounds [(Me₃C)₂Al][(Me₃C)₂AlH]N(CHMe₂)NCMe₂ ( 2 ) and [(Me₃SiCH₂)₂Al][(Me₃SiCH₂)₂AlH]N(CHMe₂)NCMe₂ ( 3 ) were formed which have five‐membered Al₂N₂H heterocycles. Thermolysis of 2 gave by C–H activation compound [(Me₃C)₂Al]₂[CH₂C(Me)=N–]₂ ( 4 ) in trace amounts which possesses two anellated AlN₂C₂ rings with a common N–N bond. In contrast, the thermal decomposition of 3 yielded by the cleavage of the N–N bond a dimeric dialkylaluminium methylideneamide ( 5 ) which has two intact C=N double bonds. Up to now our attempts to insert a C=N double bond into an Al–C bond remained unsuccessful, and only the formation of an adduct [(Me₃C)₃Al(–N=CMe₂)₂] ( 6 ) was observed upon treatment of tri(tert‐butyl)aluminium with the diazabutadiene derivative.     

HMX晶体和HMX/F2311 PBXs力学性能的MD模拟研究

用分子动力学方法, 在295 K NVT系综和COMPASS力场下, 对环四甲撑四硝胺(HMX)晶体和F₂₃₁₁沿HMX (001), (010)和(100)晶面所构成PBXs模型的力学性能进行模拟研究. 结果表明, 加入F₂₃₁₁降低了HMX的刚性, 增强了它的延展性. 在HMX (100)面上添加F₂₃₁₁对提高体系的延展性较显著. 为考察温度对力学性能的影响及其机理, 在245～445 K范围完成对HMX (100)/F₂₃₁₁ PBX的MD模拟. 力学分析表明, 随温度增加HMX (100)/F₂₃₁₁的延展性呈抛物线变化规律, 归因于F₂₃₁₁分子链的运动及其构象随温度的变化.     

乙酸在SmOx/Rh(100)模型表面上的吸附和分解

 用高分辨电子能量损失谱（HREELS）和热脱附谱（TDS）研究了\r\n乙酸在SmOx／Rh（100）模型表面上的吸附与分解．结果表明：低温下\r\n吸附乙酸时，SmOx的加入明显促进了乙酸分子中O－H键的断裂，从而有\r\n利于乙酸根的形成；升高表面温度，SmOx的存在促进了乙酸根中C－C键\r\n的断裂，有利于乙酸根的进一步分解．120K时，乙酸在SmOx／Rh（100\r\n）上主要以乙酸根的形式存在．225K时，乙酸根即可发生以生成CO为主\r\n的脱羧反应．在417和477K观察到受表面脱羧反应控制的CO2和H2的脱附\r\n峰．对反应的机理进行了讨论．     

Temperature-dependent far-infrared spectra of single crystals of high explosives using terahertz time-domain spectroscopy

Survey spectra of single-crystal HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), and PETN (pentaerythritol tetranitrate) were acquired in the region from 10 to 80 cm(-1) using terahertz time-domain spectroscopy. The spectra were taken at temperatures ranging from 8.4 to 300 K. Generally, the spectra show multiple absorption peaks in the range 50-80 cm(-1), with PETN (110) showing strong absorption features at room temperature. RDX (210) is the most notable in the region 10-40 cm(-1), showing multiple spectral features, while HMX (010) shows a very broad absorption at 47.8 cm(-1) with a fwhm of 37.3 cm(-1). Future plans include polarization-dependent investigations for multiple crystallographic orientations over an increased spectral range and higher-level theoretical calculations.     

Mono‐ and Dinuclear Ferrocenyl Ionic Compounds with Polycyano Anions. Characterization,Migration, and Catalytic Effects on Thermal Decomposition of Energetic Compounds

Neutral ferrocene‐based burning rate (BR) catalysts show strong migration trends and volatility during long‐time storage and curing of the composite solid propellants. To reduce these disadvantages thirty‐two ferrocenyl quaternary ammonium compounds, paired with polycyano anions, were synthesized and characterized by ¹H NMR, ¹³C NMR, and UV/Vis spectroscopy, as well as elemental analysis. Additionally, crystal structures of eight compounds were confirmed by single‐crystal X‐ray diffraction. TG and DSC analyses indicated that the compounds containing 1,1,2,3,3‐pentacyanopropenide anions show high thermal stability. Cyclic voltammetry studies suggested that they are quasi‐reversible or irreversible redox systems. Anti‐migration tests verified that the tested compounds show very low migration tendency and some of them exhibit no migration after 30 days aging at 70 °C. Their catalytic efficiency in the thermal decomposition of ammonium perchlorate (AP), 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), and 1,2,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane (HMX) were examined by DSC analyses. The results revealed that most of the compounds exhibit distinct effects on the thermal degradation of AP and RDX. Two compounds have good catalytic ability in the thermal decomposition of HMX, representing rare examples of the reported ferrocenyl ionic compounds, which display catalytic property during combustion of HMX.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

High‐performance poly(ethylene‐2,6‐naphthalate) fiber prepared by high‐tension annealing

A high‐tension annealing (HTA) method has been applied to zone‐annealed poly(ethylene‐2,6‐naphthalate) (PEN) fibers in order to further improve their mechanical properties. The HTA treatment was carried out under an applied tension of 428 MPa at a treating temperature of 175 °C. The applied tension was close to the tensile strength at 175 °C. The resulting HTA fiber had a birefringence of 0.492 and degree of crystallinity of 57%. Wide‐angle X‐ray diffraction (WAXD) photographs of the HTA fibers showed three reflections (010, 100, and 1 10) attributed to an α form crystal, but no (020) reflection attributed to a β form was observed in the equator. The tensile modulus and tensile strength increased with processing, and the HTA fiber had a maximum modulus of 33 GPa, a tensile strength of 1.1 GPa, and a storage modulus of 33 GPa at 25 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 61–67, 2000     

Selective Synthesis of New Tetracyclic Coumarin‐fused Pyrazolo[3,4‐b]pyridines and Pyrazolo[3,4‐b]pyridin‐6(7H)‐ones

A three‐component reaction for the synthesis of new coumarin‐fused tetracyclic system from 4‐hydroxycoumarin, aldehydes, and 5‐aminopyrazoles/5‐aminoisoxazole is described. In the presence of acetic acid, 4,7‐dihydro‐1H‐pyrazolo[3,4‐b]pyridines ( 4 ) and pyrazolo[3,4‐b]pyridines ( 5 ) were obtained in acetonitrile and dimethylsulfoxide medium, respectively. The reaction gave rise to 4,5‐dihydro‐1H‐pyrazolo[3,4‐b]pyridin‐6(7H)‐ones ( 6 ) in acetic acid–ethanol combination system, which involved the C–O bond cleavage. 4‐Hydroxy‐6‐methyl‐2H‐pyran‐2‐one and acenaphthylene‐1,2‐dione were also examined, affording the corresponding C–O bond cleavage products. Mechanism indicates that the reaction is reversible in acetic acid–ethanol combination system.     

Gas‐phase pyrolytic reactions of esters of 2‐pyridine and 8‐quinoline sulfonic acid

The rates of gas‐phase thermal elimination reaction of esters of 2‐pyridine sulfonic acid and 8‐quinoline sulfonic acid have been measured over at least 50° for each compound. The relative rates of the first‐order unimolecular decomposition at 500 K for the primary:secondary esters suggest that C O bond breaking is kinetically more significant than C H bond breaking, leading to a transition state of carbocationic character. This is consistent with the electron‐donating effect provided by the methoxy substituent in 2‐p‐methoxyphenylethyl of 2‐pyridine and 8‐quinoline sulfonate esters stabilizing the carbocation center. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 771–775, 2000     

Impact of α-C<Subscript>2</Subscript>SH calcination temperature on the mineral composition and heat flow of the products

Nitrate ester plasticized polyether (NEPE) propellant has attracted considerable attention as a kind of high-energy propellant. To investigate the evolution of thermal properties of NEPE propellant during storage life, TG-DSC-MS-FTIR was used to determine the thermal behaviors of the propellant samples before and after 5-year natural storage. It was found out that both samples experience five reaction steps and they are attributed by the evaporation and O–NO₂ bond breaking of nitrate, crystal transition of HMX and thermal decomposition of plasticizer, HMX and ammonium perchlorate. Decomposition process and temperature ranges of each step maintain consistency, but nitrate ester tends to decompose more than evaporate after storage. In the meantime, the area of DSC peak formed in the third step noticeably increased, which accounts for the lower thermal explosion temperature. To further study the decomposition of plasticizer and HMX, their kinetic triplets were solved. It was found out that the activation energy increases significantly on plasticizer decomposition step because of the enlargement of the nitrate’s particle size. Therefore, it can be drawn that the decline of NEPE propellant’s safety property after storage was contributed by the decomposition step of nitrate ester plasticizer.     

Synthesis,Crystal Structure,and Thermal Behavior of a Novel Insensitive Energetic Cocrystal Composed of 3,3′‐Bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐Amino‐1,2,4‐triazole

A novel insensitive energetic cocrystal consisting of 3,3′‐bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐amino‐1,2,4‐triazole in a 1:2 molar ratio was prepared and characterized. The structure of this cocrystal was characterized by single‐crystal X‐ray diffraction. The crystal structure of the cocrystal is a monoclinic system with P1 space group. Properties of the cocrystal studied included thermal decomposition and detonation performance. This cocrystal has a crystal density of 1.689 g · cm^–3 at 173 K and good detonation performance (D = 6940 m · s^–1, P = 20.9 GPa). Moreover, measured impact and friction sensitivities (IS > 40 J, FS > 360 N) show that it can be classified as an insensitive energetic material. Its thermodynamic properties indicate that it has moderate thermal stability with a sharp exothermic peak (244 °C, 5 K · min^–1) and a high critical temperature of thermal explosion (523 K). In view of the observations above, it may serve as a promising alternative to known explosives such as TNT.