Cure kinetics of the ring‐opening metathesis polymerization of dicyclopentadiene

The cure kinetics of polydicyclopentadiene prepared by ring‐opening metathesis polymerization with three different concentrations of Grubbs' catalyst were examined with differential scanning calorimetry. The experimental data were used to test several different phenomenological kinetic models. The data were best modeled with a model‐free isoconversional method. This analysis revealed that the activation energy increased significantly for degrees of cure greater than 60%. The catalyst concentration had a large effect on the cure kinetics. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2373–2383, 2002     

Synthesis of POSS‐terminated polycyclooctadiene telechelics via ring‐opening metathesis polymerization

In this contribution, we reported the synthesis of a series of POSS‐terminated polycyclooctadiene (PCOD) telechelics via ring‐opening metathesis polymerization (ROMP) approach. Toward this end, 1,4‐diPOSS‐but‐2‐ene was synthesized via copper‐catalyzed Huisgen cycloaddition reaction (i.e., click chemistry); it was then used as a chain transfer agent (CTA) for the ROMP of cyclooctadiene. The ROMP was carried out with Grubbs second generation catalyst and the POSS‐terminated PCOD telechelics with variable lengths of PCOD were obtained by controlling the molar ratios of CTA to cyclooctadiene. All the POSS‐terminated PCOD telechelics in bulks were microphase‐separated; the morphologies were quite dependent on the lengths of PCOD midchains. The POSS end groups can promote the crystallization of PCOD chains at room temperature, which was in marked contrast to the case of plain PCOD. Compared to the plain PCOD, the POSS‐terminated PCOD telechelics displayed improved thermal stability and surface hydrophobicity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 223–233     

Biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization

We present an approach to the synthesis of biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization; these nanoparticles may serve as novel scaffolds for the multivalent display of ligands. The nanoparticles are formed by the self‐assembly of diblock copolymers composed of a hydrophobic block and a hydrophilic activated block that can be functionalized with thiolated ligands in aqueous media. The activated block enables control over the orientation of the displayed ligands, which may be sugars, peptides, or proteins engineered to contain cysteine residues at suitable locations. The nanoparticle diameter can be varied over a wide range through changes in the composition of the block copolymer, and biofunctionalization of the nanoparticles has been demonstrated by the attachment of a peptide previously shown to inhibit the assembly of anthrax toxin. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 928–939, 2006     

Ruthenium‐based metathesis initiators: Development and use in ring‐opening metathesis polymerization

For many years, olefin metathesis has been a central topic of industrial and academic research because of its great synthetic utility. The employed initiators cover a wide range of compounds, from simple transition‐metal salts to highly sophisticated and well‐defined alkylidene complexes. Currently, ruthenium‐based catalysts are at the center of attention because of their remarkable tolerance toward oxygen, moisture, and numerous functionalities. This article focuses on recent developments in the field of ring‐opening metathesis polymerization using ruthenium‐based catalysts. ruthenium‐based initiators and their applications to the preparation of advanced polymeric materials are briefly reviewed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2895–2916, 2002     

Charge‐transfer piperazine‐containing polymeric systems via ring‐opening metathesis polymerization

This article describes the synthesis of piperazine‐containing homopolymer systems via ring‐opening metathesis polymerization (ROMP). These systems were subsequently used as electron donors in the formation of charge‐transfer (CT) complexes. Using exo‐N‐(6‐bromohexyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxamide as a starting material, monomers were synthesized to act as electron donors. The amine group at the “open” end of the piperazine was either left open or alkylated with various alkyl groups. The monomers' ability to act as electron donors and their polymerization rates were studied. After initial photometric titration studies using 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) as an electron acceptor proved that these monomers would act as electron donors, they were subsequently polymerized into homopolymers via ROMP. The experimental results showed that a methanol:chloroform mixed solvent system enhanced the rate of polymerization over a single solvent (chloroform) system. Studies also showed that the alkylated piperazine‐containing monomer had a faster rate of polymerization than the secondary piperazine monomer. These monomers were used to make piperazine‐containing homopolymers via ROMP and the resulting polymers, like the monomers, also functioned as electron donors. Potential functions of these polymers include electronics, solar cells, optical systems, and biological applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5034–5043, 2009     

Synthesis of acid‐sensitive latices by ring‐opening metathesis polymerization

This study describes the synthesis of polynorbornene colloidal particles able to release active molecules in response to pH change. Such functionalized polynorbornene latices with surface active molecules have been obtained by ring‐opening metathesis copolymerization in a dichloromethane/ethanol medium in the presence of α‐norbornenyl poly(ethylene oxide) macromonomer. Two different strategies of introduction of the active molecule—either at their periphery or at their core— have been contemplated. The particles have been characterized by both dynamic light scattering and transmission electron microscopy. Their size was found to range from 260 to 600 nm. The release of the active molecules was monitored by UV spectrometry. After 48 h in an appropriate HCl buffer (pH = 3) more than 80% of the initially linked active molecule was released. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 217–229, 2005     

Ultrasonic spectroscopic evaluation of the ring‐opening metathesis polymerization of dicyclopentadiene

An in situ ultrasonic spectroscopy technique was used to study the ring‐opening metathesis polymerization of dicyclopentadiene catalyzed by bis(tricyclohexylphosphine)benzylidene ruthenium dichloride. A reaction cell employing a flexible poly(ethylene terephthalate) window for pulse echo ultrasonic spectroscopy was used to monitor the polymerization. The changes in the density, wave speed, acoustic modulus, and attenuation were all simultaneously monitored. In comparison with Fourier transform infrared (FTIR) spectroscopy data, the changes in the density, velocity, and modulus only accurately measured the rate constant for the metathesis of the cyclopentyl unsaturation. The ultrasonic values were within 6% of the values determined by FTIR. The activation energy for metathesis of the cyclopentyl unsaturation was 84 kJ mol^?1, following first‐order kinetics. Rate constants for the polymerization of the norbornyl unsaturation could not be determined by ultrasound. The gel point, vitrification, and qualitative information about the reaction rate could be determined from the change in the attenuation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1323–1333, 2003     

Crosslinked polynorbornene particles synthesis by ring‐opening metathesis polymerization in dispersion

This article proposes the first report on the synthesis of nanometric crosslinked polynorbornene particles by ring‐opening metathesis polymerization in dispersion using ruthenium‐based complex (PCy₃)₂Cl₂Ru?CHPh as initiator. Stable but raspberry‐shaped particles were obtained. In this study, a particular attention was paid to the influence of the crosslinker nature and addition mode on reaction kinetics and morphology of the latex particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Block copolymer nanoparticles of controlled sizes via ring‐opening metathesis polymerization

This article describes the formation and characterization of self‐assembled nanoparticles of controlled sizes based on amphiphilic block copolymers synthesized by ring‐opening metathesis polymerization. We synthesized a novel hydrophobic derivative of norbornene; this monomer could be polymerized using Grubbs' catalyst [Cl₂Ru(CHPh)(PCy₃)₂] forming polymers of controlled molecular weight. We synthesized amphiphilic block copolymers of controlled composition and showed that they assemble into nanoparticles of controlled size. The nanoparticles were characterized using dynamic light scattering and transmission electron microscopy. Tuning the composition of the block copolymer enables the tuning of the diameters of the nanoparticles in the 30‐ to 80‐nm range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3352–3359, 2004     

Synthesis of polybutadiene‐based particles via dispersion ring‐opening metathesis polymerization

Latex particles based on 1,4‐polybutadiene were synthesized via dispersion ring‐opening metathesis copolymerization of 1,5‐cyclooctadiene with a α‐norbornenyl poly(ethylene oxide) macromonomer. Stable but polydisperse colloidal dispersions in the 50 nm to 10 μm size range were obtained. In this work, particular attention was paid to the effects of the kinetics of copolymerization on the structure of the graft copolymers formed and on the onset of turbidity. Strategies to prepare monodisperse polybutadiene particles were also designed through the growth of a polybutadiene shell from a well‐defined polynorbornene seed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1154–1163, 2004     

Synthesis of phenylenevinylene and naphthylenevinylene homopolymers and block copolymers by ring‐opening metathesis polymerization

Homopolymers and copolymers containing phenylenevinylenes and naphthylenevinylenes can be synthesized by ring‐opening metathesis polymerization of strained monomers such as tetraoctyloxy‐substituted cyclophanedienes and naphthalenophanedienes initiated by the third‐generation Grubbs’ initiator. The resulting homopolymers exhibited low polydispersities. The block copolymers can also be synthesized by the sequential ring‐opening metathesis polymerization of two individual monomers. The structures of homopolymers and block copolymers were fully characterized by nuclear magnetic resonance spectroscopy. The molecular weight distribution of the block copolymers is relatively broad compared to their parent homopolymers possibly due to chain transfer reaction. The molar ratio of the two blocks can be tailored by the ratio of the monomers employed. The block copolymers exhibited a more efficient energy transfer in the solid state between the different blocks than those carried out in solution. The optical and electrochemical properties of the polymers were investigated and exhibited the potential uses in optoelectronics devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 67–74     

One‐pot synthesis of polymeric nanoparticle by ring‐opening metathesis polymerization

Shell‐functionalized polymeric nanoparticle was prepared through the method of polymerization‐induced self‐assembly of block copolymers [poly(2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐block‐poly(7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester), PBNBE‐b‐PONBDM] via one‐pot ring‐opening metathesis polymerization of 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene (BNBE) and 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester (ONBDM) in a selective solvent. The compositions and the molecular weights of the copolymers were estimated by ¹H‐NMR and gel permeation chromatography. The micelles were characterized by dynamic light scattering, transmission electron micrograph, and atomic force microscopy. The results indicated that the spherical micelles constructed with bromine‐bearing PBNBE shell and PONBDM core were stable and reproducible in toluene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Kinetics of the ring‐opening metathesis polymerization of a 7‐oxanorbornene derivative by Grubbs' catalyst

The kinetics of the initiation and propagation of the ring‐opening metathesis polymerization of exo,exo‐5,6‐bis(methoxycarbonyl)‐7‐oxabicyclo[2.2.1]hept‐2‐ene catalyzed by Grubbs' catalyst (Cl₂(PCy₃)₂Ru?CHPh) were measured by ultraviolet–visible and ¹H NMR spectroscopy, respectively. Activation parameters for these processes were also determined. Although the ratio of the rate constant of initiation to the rate constant of propagation was determined to be less than 1 for this system, this polymerization showed many of the characteristics of a living system, including low polydispersities. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2125–2131, 2003     

Copolymerization of amino acid and amino ester functionalized norbornenes via living ring‐opening metathesis polymerization

The block and random copolymerization of a series of amino acid and amino ester functionalized norbornenes by ring‐opening metathesis polymerization (ROMP) induced by the well‐defined molybdenum [Mo(?N‐2,6‐ⁱPr? C₆H₃)(?CHCMe₂)Ph)(OCMe₃)₂] or ruthenium [Ru(PCy)₂Cl₂(?CHPh)] based initiators is described. The monomers are derived from the amino acids glycine, alanine, and isoleucine or the methyl esters of these amino acids and either endo‐ or exo‐norborn‐5‐ene‐2,3‐dicarboxylic anhydride. Enantiomerically pure monomers afforded optically active polymers, and the mechanism and kinetics of the copolymerizations are investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7985–7995, 2008     

High dielectric performance of tactic polynorbornene derivatives synthesized by ring‐opening metathesis polymerization

Functional polynorbornenes (PNBEs) containing pyrrolidine moiety and bis(trifluoromethyl)biphenyl side group were synthesized via ring‐opening metathesis polymerization (ROMP), and the microstructure of polymer chain was characterized by NMR spectroscopy. Poly(N‐3,5‐bis(trifluoromethyl)biphenyl‐norbornene‐pyrrolidine) (PTNP) and poly(N‐phenyl‐norbornene‐pyrrolidine) (PPNP) are supposed to have practically trans double bonds and adopt isotactic syn conformation, whereas poly(N‐3,5‐bis(trifluoromethyl)biphenyl‐norbornene‐dicarboximide) (PTNDI) has both trans and cis double bonds and atactic microstructure. PTNP, PTNDI, and PPNP have much different dielectric constants of 20, 7, and 3, respectively, which is attributed to both the polar 3,5‐bis(trifluoromethyl)biphenyl group and the stereoregular chain structure. The existence of rigid pyrrolidine moiety has a positive contribution to form the tactic polymer chain during ROMP. Polymers are highly thermal stable up to ～300 °C. Having good dielectric properties and thermal stability, these functional PNBEs are expected as the potential dielectric material in thin film capacitors. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Advances in the frontal ring opening metathesis polymerization of dicyclopentadiene

The frontal ring opening metathesis polymerization of dicyclopentadiene using first and second generation Grubbs' catalysts is reported. To have sufficiently long pot lives, dimethylaminopyridine is added as an inhibitor. By choosing the proper compositions, it is possible to determine the ranges in which pure frontal polymerization occurs. A thorough study on the effect of the above components on the maximum temperatures reached by the front and on its velocities is performed. Namely, temperatures range from 164 to 205 °C depending on the type of catalyst and the above component ratios. Besides, front velocities range from 1.0 to 15.0 cm/min, which are one of the lowest and one of the highest values reported so far in any frontal polymerization experiment reported in literature. This finding allows the complete control of the frontal ring opening polymerization of dicyclopentadiene also in practical applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2776–2780     

Synthesis and characterization of functional polyethylene with regularly distributed thioester pendants via ring‐opening metathesis polymerization

Four kinds of functional polyethylene carrying thioester pendants were synthesized via ring‐opening metathesis polymerization (ROMP) of alkyl cyclopent‐3‐enecarbothioate catalyzed by a ruthenium‐based commercial catalyst and subsequent hydrogenation of the ROMP products (alkyl = ethyl, n‐butyl, n‐octyl, or n‐dodecyl). In these polymers the pendant alkyl thioester groups are precisely distributed along the backbone on every five methylene carbons. Chain structure, molecular weight and molecular weight distribution of the polymers were characterized by ¹H and ¹³C NMR, and GPC. The ROMP reactions all reached high monomer conversions, and hydrogenation of the ROMP products were exhaustive. Thermal transitions and side chain crystallization behaviors of the polymer were investigated and characterized by DSC and TGA. Glass transition temperature and melting temperature of these polymers were higher than the counterparts containing ester pendants. TGA analysis indicated that all the thioester‐containing polymers exhibited moderate thermal stability, and the sulfur‐containing polymers show slightly lower thermal stability than their counterparts without sulfur. The new family of functionalized polyethylenes could be used as models of ethylene‐thioacrylate copolymers, and find applications as novel functional materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4027–4036     

ABA triblock copolymers with a ring‐opening metathesis polymerization/macromolecular chain‐transfer agent approach

Block copolymers containing polystyrene and polycyclooctene were synthesized with a ring‐opening metathesis polymerization/chain‐transfer approach. Polystyrene, containing appropriately placed olefins, was prepared by anionic polymerization and served as a macromolecular chain‐transfer agent for the ring‐opening metathesis polymerization of cyclooctene. These unsaturated polymers were subsequently converted to the corresponding saturated triblock copolymers with a simple heterogeneous catalytic hydrogenation step. The molecular and morphological characterization of the block copolymers was consistent with the absence of significant branching in the central polycyclooctene and polyethylene blocks [high melting temperatures (114–127 °C) and levels of crystallinity (17–42%)]. A dramatic improvement in both the long‐range order and the mechanical properties of a microphase‐separated, symmetric polystyrene–polycyclooctene–polystyrene block copolymer sample was observed after fractionation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 361–373, 2007