A Facile Method for Synthesis of Porous NiCo2O4 Nanorods as a High‐Performance Anode Material for Li‐Ion Batteries

Porous electrode materials with large specific surface area, relatively short diffusion path, and higher electrical conductivity, which display both better rate capabilities and good cycle lives, have huge benefits for practical applications in lithium‐ion batteries. Here, uniform porous NiCo₂O₄ nanorods (PNNs) with pore‐size distribution in the range of 10–30 nm and lengths of up to several micrometers are synthesized through a convenient oxalate co‐precipitation method followed by a calcining process. The PNN electrode exhibits high reversible capacity and outstanding cycling stability (after 150 cycles still maintain about 650 mA h g^?1 at a current density of 100 mA g^?1), as well as high Coulombic efficiency (>98%). Moreover, the PNNs also exhibit an excellent rate performance, and deliver a stable reversible specific capacity of 450 mA h g^?1 even at 2000 mA g^?1. These results demonstrate that the PNNs are promising anode materials for high‐performance Li‐ion batteries.     

Synthesis of Porous NiO Nanorods as High‐Performance Anode Materials for Lithium‐Ion Batteries

1D nanostructured metal oxides with porous structure have drawn wide attention to being used as high‐performance anode materials for lithium‐ion batteries (LIBs). This study puts forward a simple and scalable strategy to synthesize porous NiO nanorods with the help of a thermal treatment of metal‐organic frameworks in air. The NiO nanorods with an average diameter of approximately 38 nm are composed of nanosized primary particles. When evaluated as anode materials for LIBs, an initial discharge capacity of 743 mA h g^?1 is obtained at a current density of 100 mA g^?1, and a high reversible capacity is still maintained as high as 700 mA h g^?1 even after 60 charge–discharge cycles. The excellent electrochemical performance is mainly ascribed to the 1D porous structure.     

Porous Silicon@Polythiophene Core–Shell Nanospheres for Lithium‐Ion Batteries

Polythiophene‐coated porous silicon core–shell nanospheres (Si@PTh) composite are synthesized by a simple chemical oxidative polymerization approach. The polythiophene acts as a flexible layer to hold silicon grains when they are repeatedly alloying/dealloying with lithium during the discharge/charge process. The long lifespan and high‐current‐density rate ­capability (at a current of 8 A g^?1) of the Si@PTh composite are vastly improved compared with as‐prepared Si spheres. Typically, these Si@PTh composite electrodes achieve a reversible capacity of 1130.5 mA h g^?1 at 1 A g^?1 current density after 500 cycles, and can even possess a discharge capacity up to 451.8 mA h g^?1 at 8 A g^?1. The improved electrochemical performance can be ascribed to the synergy effects of the flexible PTh coating and the distinctive core–shell nanospheres with porous structure, which can largely alleviate the volume expansion of the Si during alloying with lithium.     

Electrospinning Synthesis of Porous NiCoO2 Nanofibers as High‐Performance Anode for Lithium‐Ion Batteries

Nanostructured ternary/mixed transition metal oxides have attracted considerable attentions because of their high‐capacity and high‐rate capability in the electrochemical energy storage applications, but facile large‐scale fabrication with desired nanostructures still remains a great challenge. To overcome this, a facile synthesis of porous NiCoO₂ nanofibers composed of interconnected nanoparticles via an electrospinning–annealing strategy is reported herein. When examined as anode materials for lithium‐ion batteries, the as‐prepared porous NiCoO₂ nanofibers demonstrate superior lithium storage properties, delivering a high discharge capacity of 945 mA h g^?1 after 140 cycles at 100 mA g^?1 and a high rate capacity of 523 mA h g^?1 at 2000 mA g^?1. This excellent electrochemical performance could be ascribed to the novel hierarchical nanoparticle‐nanofiber assembly structure, which can not only buffer the volumetric changes upon lithiation/delithiation processes but also provide enlarged surface sites for lithium storage and facilitate the charge/electrolyte diffusion. Notably, a facile synthetic strategy for fabrication of ternary/mixed metal oxides with 1D nanostructures, which is promising for energy‐related applications, is provided.     

Hollow Silica Spheres Embedded in a Porous Carbon Matrix and Its Superior Performance as the Anode for Lithium‐Ion Batteries

Silica (SiO₂) is regarded as one of the most promising anode materials for lithium‐ion batteries due to the high theoretical specific capacity and extremely low cost. However, the low intrinsic electrical conductivity and the big volume change during charge/discharge cycles result in a poor electrochemical performance. Here, hollow silica spheres embedded in porous carbon (HSS–C) composites are synthesized and investigated as an anode material for lithium‐ion batteries. The HSS–C composites demonstrate a high specific capacity of about 910 mA h g^?1 at a rate of 200 mA g^?1 after 150 cycles and exhibit good rate capability. The porous carbon with a large surface area and void space filled both inside and outside of the hollow silica spheres acts as an excellent conductive layer to enhance the overall conductivity of the electrode, shortens the diffusion path length for the transport of lithium ions, and also buffers the volume change accompanied with lithium‐ion insertion/extraction processes.     

Facile Synthesis of Porous MnO Microspheres for High‐Performance Lithium‐Ion Batteries

Manganese oxide is a highly promising anode material of lithium‐ion batteries (LIBs) for its low insertion voltage and high reversible capacity. Porous MnO microspheres are prepared by a facile method in this work. As an anode material of LIB, it can deliver a high reversible capacity up to 1234.2 mA h g^?1 after 300 cycles at 0.2 C, and a capacity of 690.0 mA h g^?1 in the 500th cycle at 2 C. The capacity increase with cycling can be attributed to the growth of reversible polymer/gel‐like film, and the better cycling stability and the superior rate performance can be attributed to the featured structure of the microspheres composed of nanoparticles with a short transport path for lithium ions, a large specific surface, and material/electrolyte contact area. The results suggest that the porous MnO microspheres can function as a promising anode material for high‐performance LIBs.     

Sulfur Immobilized in Hierarchically Porous Structured Carbon as Cathodes for Lithium–Sulfur Battery with Improved Electrochemical Performance

In order to overcome the main obstacles for lithium–sulfur batteries, such as poor conductivity of sulfur, polysulfide intermediate dissolution, and large volume change generated during the cycle process, a hard‐template route is developed to synthesize large‐surface area carbon with abundant micropores and mesopores to immobilize sulfur species. The microstructures of the C/S hybrids are investigated using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherms, and electrochemical impedance spectroscopy techniques. The large surface and porous structure can effectively alleviate large strain due to the lithiation/delithiation process. More importantly, the micropores can effectively confine small molecules of sulfur in the form of S_2–4, avoiding loss of active S species and dissolution of high‐order lithium polysulfides. The porous C/S hybrids show significantly enhanced electrochemical performance with good cycling stability, high specific capacity, and rate capability. The C/S‐39 hybrid with an optimal content of 39 wt% S shows a reversible capacity of 780 mA h g^?1 after 100 cycles at the current density of 100 mA g^?1. Even at a current density of 5 A g^?1, the reversible capacity of C/S‐39 can still maintain at 420 mA h g^?1 after 60 cycles. This strategy offers a new way for solving long‐term reversibility obstacle and designing new cathode electrode architectures.     

Epitaxial Growth of Urchin‐Like CoSe2 Nanorods from Electrospun Co‐Embedded Porous Carbon Nanofibers and Their Superior Lithium Storage Properties

A facile synthesis of porous graphitic carbon nanofibers (CNFs) with encapsulated Co nanoparticles (denote as Co@CNFs) via electrospinning and subsequent annealing is reported. The in situ generated Co nanoparticles (NPs) promote the CNF graphitization under a low temperature of 700 °C, which simultaneously results in the porous structure of the Co@CNFs with a large surface area (416 m² g^?1). Furthermore, urchin‐like CoSe₂ nanorods are epitaxially grown from the Co@CNFs via a facile hydrothermal selenation, in which the embedded Co NPs serve as directing seeds and sacrificial Co‐source, and CoSe₂ nanorods are rooted into the CNFs (denote as CoSe₂@CNFs). When used as anode materials for lithium ion batteries, the CoSe₂@CNFs demonstrate superior lithium storage properties, delivering a high reversible capacity of 1405 mA h g^?1 after 300 cycles at a current density of 200 mA g^?1. The enhanced lithium storage performance can be attributed to the novel hybrid structure, namely, the porous and graphitic CNFs can not only facilitate the charge/ion transfer but also buffer the volume changes of the electrode during lithiation/delithiation processes. More importantly, a general strategy is provided to graphitize amorphous carbon materials via the use of in situ generated transition metal nanoparticles as catalyst.     

Facile Fabrication of Bicomponent CoO/CoFe2O4‐N‐Doped Graphene Hybrids with Ultrahigh Lithium Storage Capacity

A facile strategy is developed to fabricate bicomponent CoO/CoFe₂O₄‐N‐doped graphene hybrids (CoO/CoFe₂O₄‐NG). These hybrids are demonstrated to be potential high‐performance anodes for lithium‐ion batteries (LIBs). The CoO/CoFe₂O₄ nanoplatelets are finely dispersed on the surface of N‐doped graphene nanosheets (CoO/CoFe₂O₄‐NG). The CoO/CoFe₂O₄‐NG electrode exhibits ultrahigh specific capacity with 1172 mA h g^?1 at 500 mA g^?1 and 970 mA h g^?1 at 1000 mA g^?1 as well as excellent cycle stability due to the synergetic effects of N‐doped graphene and CoO/CoFe₂O₄ nanoplatelets. The well‐dispersed bicomponent CoO/CoFe₂O₄ is responsible for the high specific capacity. The N‐doped graphene with high specific surface area has dual roles: to provide active sites for dispersing the CoO/CoFe₂O₄ species and to function as an electrical conducting matrix for fast charge transfer. This method provides a simple and efficient way to configure the hybridized electrode materials with high lithium storage capacity.     

Tailoring MoS2 Ultrathin Sheets Anchored on Graphene Flexible Supports for Superstable Lithium‐Ion Battery Anodes

2D MoS₂ has a significant capacity decay due to the stack of layers during the charge/discharge process, which has seriously restricted its practical application in lithium‐ion batteries. Herein, a simple preform‐in situ process to fabricate vertically grown MoS₂ nanosheets with 8–12 layers anchored on reduced graphene oxide (rGO) flexible supports is presented. As an anode in MoS₂/rGO//Li half‐cell, the MoS₂/rGO electrode shows a high initial coulomb efficiency (84.1%) and excellent capacity retention (84.7% after 100 cycles) at a current density of 100 mA g^?1. Moreover, the MoS₂/rGO electrode keeps capacity as high as 786 mAh g^?1 after 1000 cycles with minimum degradation of 54 µAh g^?1 cycle^?1 after being further tested at a high current density of 1000 mA g^?1. When evaluated in a MoS₂/rGO//LiCoO₂ full‐cell, it delivers an initial charge capacity of 153 mAh g^?1 at a current density of 100 mA g^?1 and achieves an energy density of 208 Wh kg^?1 under the power density of 220 W kg^?1.     

Encapsulating Tin Dioxide@Porous Carbon in Carbon Tubes: A Fiber‐in‐Tube Hierarchical Nanostructure for Superior Capacity and Long‐Life Lithium Storage

A novel fiber‐in‐tube hierarchical nanostructure of SnO₂@porous carbon in carbon tubes (SnO₂@PC/CTs) is creatively designed and synthesized though a carbon coating on scalable electrospun hybrid nanofibers template and a post‐etching technique. This 1D nanoarchitecture consists of double carbon‐buffering matrixes, i.e., the external carbon tubular shell and the internal porous carbon skeleton, which can work synergistically to address the various issues of SnO₂ nanoanode operation, such as pulverization, particle aggregation, and vulnerable electrical contacts between the SnO₂ nanoparticles and the carbon conductors. Thus, the as‐obtained SnO₂@PC/CTs nanohybrids used as a lithium‐ion‐battery anode exhibits a higher reversible capacity of 1045 mA h g^?1 at 0.5 A g^?1 after 300 cycles as well as a high‐rate cycling stability after 1000 cycles. The enhanced performance can be attributed to the wonderful merits of the external carbon protective shell for preserving the integrity of the overall electrode, and the internal porous carbon skeleton for inhibiting the aggregation and electrical isolation of the active particles during cycling.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

Graphene‐Based Phosphorus‐Doped Carbon as Anode Material for High‐Performance Sodium‐Ion Batteries

Graphene‐based phosphorus‐doped carbon (GPC) is prepared through a facile and scalable thermal annealing method by triphenylphosphine and graphite oxide as precursor. The P atoms are successfully doped into few layer graphene with two forms of P–O and P–C bands. The GPC used as anode material for Na‐ion batteries delivers a high charge capacity 284.8 mAh g^?1 at a current density of 50 mA g^?1 after 60 cycles. Superior cycling performance is also shown at high charge?discharge rate: a stable charge capacity 145.6 mAh g^?1 can be achieved at the current density of 500 mA g^?1 after 600 cycles. The result demonstrates that the GPC electrode exhibits good electrochemical performance (higher reversible charge capacity, super rate capability, and long‐term cycling stability). The excellent electrochemical performance originated from the large interlayer distance, large amount of defects, vacancies, and active site caused by P atoms doping. The relationship of P atoms doping amount with the Na storage properties is also discussed. This superior sodium storage performance of GPC makes it as a promising alternative anode material for sodium‐ion batteries.     

Controllable Formation of Niobium Nitride/Nitrogen‐Doped Graphene Nanocomposites as Anode Materials for Lithium‐Ion Capacitors

Niobium nitride/nitrogen‐doped graphene nanosheet hybrid materials are prepared by a simple hydrothermal method combined with ammonia annealing and their electrochemical performance is reported. It is found by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the as‐obtained niobium nitride nanoparticles are about 10–15 nm in size and homogeneously anchored on graphene. A non‐aqueous lithium‐ion capacitor is fabricated with an optimized mass loading of activated carbon cathode and the niobium nitride/nitrogen‐doped graphene nanosheet anode, which delivers high energy densities of 122.7–98.4 W h kg^?1 at power densities of 100–2000 W kg^?1, respectively. The capacity retention is 81.7% after 1000 cycles at a current density of 500 mA g^?1. The high energy and power of this hybrid capacitor bridges the gap between conventional high specific energy lithium‐ion batteries and high specific power electrochemical capacitors, which holds great potential applications in energy storage for hybrid electric vehicles.     

Graphene Nanosheets Suppress the Growth of Sb Nanoparticles in an Sb/C Nanocomposite to Achieve Fast Na Storage

Presently, graphene incorporation is one of the most effective strategies to develop superior electrode materials for sodium‐ion batteries (SIBs). Herein, it is excitingly found that an incorporated graphene nanosheet in the preparation processes can not only completely protect all the Sb nanoparticles in an Sb/C composite from being inactivated, but also suppresses their growth to undesirable micrometer size. While there are still many exposed Sb particulates on the surface of pristine Sb/C microplates, the graphene‐incorporated Sb/C/G nanocomposite consists of uniform Sb nanoparticles of 20–50 nm, all of which have been protected by and wrapped in the mixed carbon network. When used as anode materials for SIBs, the Sb/C/G nanocomposite exhibits the best Na‐storage properties in terms of the highest reversible capacity (650 mA h g^?1 at 0.025 A g^?1), fastest Na‐storage ability (290 mA h g^?1 at a high current density of 8 A g^?1), and optimal cycling performance (no capacity decay after 200 cycles), in comparison to pristine Sb/C and pure Sb. It is further revealed that the much enhanced performance should originate from the improvement of Na‐storage kinetics and increase of electronic conductivity via comparing the electrochemical impedance spectra, and cyclic voltammetry profiles, as well as the polarization variation along with current densities.     

Co3O4 Hollow Nanoparticles and Co Organic Complexes Highly Dispersed on N‐Doped Graphene: An Efficient Cathode Catalyst for Li‐O2 Batteries

Rechargeable Li‐O₂ batteries are promising candidates for electric vehicles due to their high energy density. However, the current development of Li‐O₂ batteries demands highly efficient air cathode catalysts for high capacity, good rate capability, and long cycle life. In this work, a hydrothermal‐calcination method is presented to prepare a composite of Co₃O₄ hollow nanoparticles and Co organic complexes highly dispersed on N‐doped graphene (Co–NG), which acts as a bifunctional air cathode catalyst to optimize the electrochemical performances of Li‐O₂ batteries. Co–NG exhibits an outstanding initial discharge capacity up to 19 133 mAh g^?1 at a current density of 200 mA g^?1. In addition, the batteries could sustain 71 cycles at a cutoff capacity of 1000 mAh g^?1 with low overpotentials at the current density of 200 mA g^?1. Co–NG composites are attractive as air cathode catalysts for rechargeable Li‐O₂ batteries.     

Hierarchically Porous NaCoPO4–Co3O4 Hollow Microspheres for Flexible Asymmetric Solid‐State Supercapacitors

A template‐free hydrothermal method is developed to prepare hierarchical hollow precursors. An inside‐out Ostwald ripening mechanism is proposed to explain the formation of the hollow structure. After the calcination in the air, hierarchically meso/macroporous NaCoPO₄–Co₃O₄ hollow microspheres can easily be obtained. When being evaluated as electrode materials for a supercapacitor, the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres electrode shows a specific capacitance of 268 F g^?1 at 0.8 A g^?1 and offers a good cycle life. More importantly, the obtained materials are successfully applied to fabricate flexible solid‐state asymmetric supercapacitors. The device exhibits a specific capacitance of 28.6 mF cm^?2 at 0.1 mA cm^?2, a good cycling stability with only 5.5% loss of capacitance after 5000 cycles, and good mechanical flexibility under different bending angles, which confirms that the hierarchically porous NaCoPO₄–Co₃O₄ hollow microspheres are promising active materials for the flexible supercapacitor.     

3D Array of Bi2S3 Nanorods Supported on Ni Foam as a Highly Efficient Integrated Oxygen Electrode for the Lithium‐Oxygen Battery

Bismuth sulfide nanorod array is directly grown on nickel foam (R‐Bi₂S₃/NF) to serve as a completely carbon and binder‐free 3D porous oxygen electrode material for lithium‐oxygen (Li‐O₂) batteries. The synergistic effect of the fast kinetics of electron transport and gas and electrolyte diffusion provided by the continuous free‐standing network structure and the excellent electrocatalytic activity of the bismuth sulfide nanorod array enables outstanding performance of the oxygen electrode. Li‐O₂ battery with the free‐standing R‐Bi₂S₃/NF oxygen electrode exhibits high energy efficiency (78.7%), good rate capability (4464 mA h g⁻¹ at 1500 mA g⁻¹), as well as excellent cyclability (146 cycles) while maintaining a moderate specific capacity of 1000 mA h g⁻¹. The effect of cathodes with different reactant (O₂) and intermediate (LiO₂) adsorbability on the product (Li₂O₂) growth model is studied by first‐principle calculations. The strong O₂ adsorption and weak LiO₂ adsorption on Bi₂S₃ drives the growth of large‐size Li₂O₂ particles via solution growth model. Remarkably, the large‐area pouch‐type Li‐O₂ battery delivers an energy density of 330 Wh kg⁻¹. The present results open up a promising avenue toward developing novel electrode architecture for high‐performance Li‐O₂ batteries through controlling morphology and functionality of porous electrodes.     

Amorphous Cobalt Coordination Nanolayers Incorporated with Silver Nanowires: A New Electrode Material for Supercapacitors

The 2D amorphous cobalt coordination framework/silver nanowires nanocomposites (A‐CoL/Ag NC) are successfully synthesized by one‐step solution agitation at room temperature. The experimental data reveal that the hybrid provides sufficient contact between active materials and electrolyte, and facilitates the transfer of ions/electrons, resulting in high specific capacitance, high output potential, great rate capacity at high current density, and good cycle stability. As supercapacitor electrode materials, the as‐prepared A‐CoL/Ag NC electrode exhibits a great specific capacitance which can reach up to 1467 mF cm^?2 at 1.0 mA cm^?2, and 1060 mF cm^?2 even at 10.0 mA cm^?2. The A‐CoL/Ag NC// activated carbon asymmetric supercapacitor (AC ASC) displays a maximum energy density (110 W h kg^?1 at 760 W kg^?1) and maximum power density (6410 W kg^?1 at 63 W h kg^?1) in 3.0 m KOH. Moreover, the developed solid‐state A‐CoL/Ag NC//AC ASC has a broad operated potential window within 0–1.6 V, long cycle life (95.2% after cycling 7000 cycles), delivering an energy density of 151 W h kg^?1 (at 790 W kg^?1), and a power density of 7972 W kg^?1 (at 70 W h kg^?1). The well‐synthesized nanocomposite provides a novel way to synthesize prominent electrode materials for supercapacitors.     

Resin‐Derived Ni3S2/Carbon Nanocomposite for Advanced Rechargeable Aqueous Zn‐Based Batteries

The exploration of high‐energy and stable cathode materials is highly desirable and challenging for the development of advanced Zn‐based batteries. In this work, a facile pyrolysis method is reported to synthetize Ni₃S₂/carbon nanocomposite as high‐performance cathode by employing ion exchange resin as a precursor. Attributing to the abundant active sites and enhanced conductivity from well binding between Ni₃S₂ and carbon, a markedly high capacity of 234.3 mA h g^?1 is obtained for this Ni₃S₂/carbon at a high current density of 6.9 A g^?1. Moreover, a Zn‐based battery is demonstrated by using the Ni₃S₂/carbon as a cathode and Zn plate as an anode, which delivers a maximum power density of 58.6 kW kg^?1, together with a peak energy density of 356 W h kg^?1 and 93.7% capacity retention after 5000 charging–discharging cycles. This simple synthetic strategy to achieve robust Ni‐based composite electrodes may open up new opportunities to design other transition metal–based electrodes for energy storage applications.