Joint‐aggregation intumescent flame‐retardant effect of ammonium polyphosphate and charring agent in polypropylene

In order to explore the structure mode of intumescent flame retardants (IFRs) with higher efficiency, IFR particles with joint‐aggregation structure (@IFR) were obtained through the treatment of ammonium polyphosphate (APP) and a charring agent (PT‐Cluster) in their aqueous solution. Then, the joint‐aggregation IFR effect was researched using its application in polypropylene. In case of 20 wt% IFR loading, the limiting oxygen index (LOI) value of @IFR/PP was 1.1% higher than that of 15APP/5PT‐Cluster/PP mixture, and a 1.6 mm‐thick @IFR/PP composite passed the UL 94 V‐2 rating test, while 15APP/5PT‐Cluster/PP demonstrated no flame‐retardant rating in UL 94 vertical burning tests. In a cone calorimeter test, @IFR also had a better inhibition effect on heat release. The average heat release rate (av‐HRR) value during 0 to 120 seconds of @IFR/PP was only 41 kW m^?2, which was 33.9% lower than that of the 15APP/5PT‐Cluster/PP. Furthermore, the peak heat release rate (pk‐HRR) of @IFR/PP was 20.5% lower than that of 15APP/5PT‐Cluster/PP, and the time to pk‐HRR of @IFR/PP was 710 seconds, while that of 15APP/5PT‐Cluster/PP was 580 seconds. The better inhibition effect on HRR and the delay of time to pk‐HRR were caused by the joint‐aggregated structure of @IFR, which can rapidly react to form stable and efficient char layers. This kind of join‐aggregation IFR effect has great significance in suppressing the spread of fire in reality. In addition, @IFR also increased the mechanical properties of PP composites slightly compared with the APP/PT‐Cluster mixture.     

Synergistic effects of organo‐sepiolite and zinc borate on the fire retardancy of polypropylene

Polypropylene (PP)/sepiolite/zinc borate (BZn) composites were prepared by melt extrusion after pre‐modification of sepiolite with cetyltrimethylammonium bromide. The synergistic effects of organo‐sepiolite (OSEP) and BZn on the fire retardancy of PP were studied. X‐ray diffraction and transmission electron microscopy were used to characterize the morphology of the composite. Thermogravimetric analysis, cone calorimetric analysis, limiting oxygen index, and the UL‐94 protocol (Demaisheng technology Co. Ltd.,Shenzhen,China) were used to assess the thermal stability and fire retardancy of the composites. The fire retardancy of PP was greatly improved by introducing OSEP and BZn. The reduction in peak heat release rate for PP/BZn composites at 10% BZn loading is 62% compared with pristine PP, but increased to 78% for PP/10%BZn/10%OSEP composite. Other fire retardant parameters were also improved. The fire performance index of PP/10%BZn/10%OSEP composite was 0.045 sm²/kW compared with 0.014 sm²/kW of pristine PP. The average mass loss rate was 12.1 g/sec/m² for the composite with both additives compared with 30.1 g/sec/m² for pristine PP; the smoke production rate decreased by 37% from 0.117 m²/s of pristine PP to 0.074 m²/s of PP/OSEP/BZn. The char residue of composite increased from 0.6% in pristine PP to 12.19% in the composite. The limiting oxygen index increased from 17.1 in pristine PP to 20.8 in the composite: all the samples could obtain a UL‐94 horizontal burn rating. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic improvement of fire retardancy and mechanical properties of ferrocene‐based polymer in intumescent polypropylene composite

The ferrocene‐based polymer (PDPFDE) accompanied with traditional intumescent flame retardant (IFR) system (ammonium polyphosphate (APP)/pentaerythritol (PER) = 3/1, mass ratio) has been used as additive flame retardant in polypropylene (PP), aiming to lower the total loading amount. The thermal stability and fire retardant properties were investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical combustion (UL‐94), and cone calorimetry (CONE). The fire retardant mechanism was studied by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. The results showed that the PP1 with 25 wt% IFR only passed the UL‐94 V‐1 rating, but the PP6 loaded by 0.5 wt% PDPFDE and 22.5 wt% IFR possessed an LOI value of 28.5% and passed the UL‐94 V‐0 rating; the peak heat release rate (pHRR) and total heat release (THR) are decreased by 63% and 43%, respectively, compared with pure PP. In addition, the char residue of PP6 manifested a very compact and smooth surface, indicating a more effective barrier layer. Meanwhile, it was interesting that the addition of PDPFDE evidently improved the impact strength and elongation at break of PP/IFR composites.     

Synergistic effect between a char forming agent (CFA) and microencapsulated ammonium polyphosphate on the thermal and flame retardant properties of polypropylene

The synergistic effect between a char forming agent (CFA) and microencapsulated ammonium polyphosphate (MAPP) on the thermal and flame retardancy of polypropylene (PP) are investigated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, thermogravimetric analysis (TGA), scanning electron micrograph (SEM), and water resistance test. The results of cone calorimetry show that heat release rate peak (PHRR), total heat release (THR), and the mass loss of PP with 30 wt% intumescent flame retardant (IFR, CFA/MAPP = 1:2) decreases remarkably compared with that of pure PP. The HRR, THR, and mass loss decrease, respectively from 1140 to 100 kW/m², from 96 to 16.8 MJ/m², and from 100 to 40%. The PP composite with CFA/MAPP = 1:2 has the best water resistance, and it can still obtain a UL‐94 V‐0 rating after 168 hr soaking in water. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of melamine polyphosphate and halloysite nanotubes on the flammability and thermal behavior of polyamide 6

Melamine polyphosphate (MPP) and halloysite nanotubes (HNT) were introduced to polyamide 6 (PA6) by melt blending in order to improve the fire resistance. PA6 composite containing 12% flame retardants with good spinnability was obtained. The flammability of PA6 composite was characterized by limiting oxygen index (LOI), UL‐94 vertical burning and cone calorimeter (CONE) tests. The results indicated that the LOI value could reach 24.0 vol.% and UL‐94 rating could achieve V2 level at the presence of 12% flame retardants. CONE data demonstrated that peak heat release rate was significantly reduced from 554 kW/m² of neat PA6 to 368 kW/m² of the sample containing flame retardants. Thermal analysis indicated that the thermal stability and char formation were improved by the presence of flame retardants. The morphology of residue char was characterized by scanning electron microscopy; and it suggested that a network‐structured protective char layer had been formed. The possible synergism between MPP/HNT and their flame retardant mechanism was also analyzed and discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of a novel hyperbranched and phosphorus‐containing charring‐foaming agent and its application in polypropylene

In this work, a novel hyperbranched and phosphorus‐containing triazine derivative (HPCFA) is synthesized. HPCFA is used as charring‐foaming agent and combined with ammonium polyphosphate (APP) as intumescent flame retardant to flame retard polypropylene (PP). PP/HPCFA/APP composite can achieve limited oxygen index value of 31% and pass UL 94V‐0 rating by addition of 20 wt% HPCFA/APP (1/2, w/w). Besides, HPCFA is compared with another hyperbranched charring‐foaming agent (HCFA). HPCFA and HCFA have similar chemical structure, and their only difference is that HPCFA has phosphorus‐containing unit in the main chain compared with HCFA. HPCFA/APP system exhibits superior flame retardancy compared with HCFA/APP system. Char residue analysis demonstrates that HPCFA/APP system can form denser and more compact char layer in comparison with that of HCFA/APP system.     

Preparation of gel‐silica/ammonium polyphosphate core‐shell flame retardant and properties of polyurethane composites

A novel intumescent gel‐silica/ammonium polyphosphate core‐shell flame retardant (MCAPP), which contains silicon, phosphorus, and nitrogen, has been prepared by in situ polymerization. The structure of MCAPP was characterized by Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The properties of MCAPP were investigated by water solubility, hydrophilicity, and morphological determination. The flame retardancy and thermal stability of polyurethane (PU) composite with MCAPP were evaluated by limiting oxygen index (LOI), UL‐94 test, cone calorimetry, and thermogravimetric analysis (TGA). The results showed that MCAPP could decrease the heat release rate (HRR) and increase the thermal stability of PU materials greatly. Finally, water‐resistant properties of PU/FR composites were also studied. Copyright © 2010 John Wiley & Sons, Ltd.     

Poly (diallyldimethylammonium) and polyphosphate polyelectrolyte complexes as an all‐in‐one flame retardant for polypropylene

Poly (diallyldimethylammonium chloride) (PDDA) and ammonium polyphosphate (APP) deionized chloride ions and ammonium ions by ionizing in aqueous solution respectively, then combined to form poly (diallyldimethylammonium) and polyphosphate (PAPP) polyelectrolyte complexes as an all‐in‐one flame retardant for polypropylene and its composites were characterized by Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy. One flame retardant system composed of PAPP and PP, the other flame retardant system composed of PAPP, Polyamide‐6 (PA6) and PP were tested by limiting oxygen index (LOI), UL‐94, cone calorimeter tests and thermogravimetric analysis (TGA) and compared with pure PP. The results showed that the LOI value of PP/PAPP composite can reach 27.5%, and UL‐94 V‐2 rating can be reached at 25 wt% PAPP loading. Meanwhile the cone calorimetry results displayed that the peak heat release rate (PHRR) and total heat release (THR) were reduced up to 69.3% and 22.5%, respectively, compared with those of pure PP. After adding 5 wt% PA6, the carbon source missing due to the early PAPP decomposition can be made up, and PHRR and THR can be further reduced slightly. The flame retardant mechanism of PAPP was studied by FTIR spectroscopy and X‐ray photoelectron spectroscopy. Six‐membered ring of C─N containing conjugate double bonds, cross‐linked phosphate structure formed stable, intumescent, compact char layer which greatly improved the flame retardancy of PP.     

Functionalized ZrP nanosheet with free‐radical quenching capability and its synergism in intumescent flame‐retardant polypropylene

The combination of catalyzing carbonization and free‐radical quenching mechanism is proposed to be a promising strategy for the preparation of high‐efficiency flame‐retardant polypropylene (PP). Herein, a novel functionalized zirconium phosphate (RQZrP) nanosheet with free‐radical quenching capability was fabricated by decorating macromolecular N‐alkoxy hindered amine (MNOR) onto the surface of ZrP. It was combined with an intumescent flame retardant (IFR) to flame‐retard PP. The results showed that there was a good synergism between RQZrP and IFR, which effectively improved the fire safety of PP. When the content of RQZrP was 2 wt% and IFR was 23 wt%, the limiting oxygen index (LOI) of PP increased from 19.0% to 33.0%, and it achieved a UL‐94 V‐0 rating. Meanwhile, the peak heat release rate (PHRR), total heat release (THR), carbon monoxide production (COP), and carbon dioxide production (CO₂P) were significantly decreased. It revealed that nitroxyl radicals generated by RQZrP could capture alkyl radicals and peroxy radicals that produced during the degradation and combustion of PP. Meanwhile, RQZrP acted as a solid acid that catalyzed PP chains rapidly cross‐linking to form char on its surface, and it also played as a supporting skeleton to enhance the strength and compactness of the char layer, thus effectively preventing the transmission of heat, oxygen, and combustible gases.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic effects of β‐cyclodextrin containing silicone oligomer on intumescent flame retardant polypropylene system

The effects of β‐cyclodextrin containing silicone oligomer(CDS), as a synergistic agent, on the flame retardancy and mechanical properties of intumescent flame retardant polypropylene composites were studied by adding different amounts of CDS in intumescent flame retardants. The limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were utilized to evaluate the synergistic effects of CDS in the composites. It was found that after a little amount of CDS partially replaced a charring‐foaming agent (CFA) in IFR, LOI values of the composites were enhanced and they obtained a UL‐94 V‐0 rating. IFR system containing 6.25wt% CDS presented the best flame retardancy in PP. The experimental results obtained from LOI and UL‐94, TGA, SEM, and mechanical properties indicated that the combination of CDS and CFA presents synergistic effects in flame retardancy, char formation, and mechanical properties of the composites. This is probably due to different structures of polyhydroxyl macromolecules (CDS and CFA), the existence of dimethyl silicone group in CDS, and the toughness of epoxy silicon chain in CDS. SEM results proved that the interfacial compatibility between IFR and PP was improved by CDS. Copyright © 2009 John Wiley & Sons, Ltd.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of clay containing intumescent polypropylene nanoclay composites

The functions of nanoclay and three different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), and boron silicon containing preceramic oligomer (BSi), were studied to improve the flame retardancy of polypropylene (PP)‐nanoclay‐intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis (TGA), and cone calorimeter. According to the results obtained, the addition of 20 wt% intumescent flame retardant (IFR) improved the flame retardancy by increasing the char formation. Addition of clay slightly increases the LOI value and reduces the maximum heat release rate (HRR). Addition of clay also increases the barrier effect due to intumescent char, especially in thin samples. Boron compounds show their highest synergistic effect at about 3 wt% loading. According to UL‐94 test and LOI test, 3 wt% ZnB containing composite shows the highest rating (V0) and BPO₄ containing sample shows the highest LOI value (26.5). Copyright © 2010 John Wiley & Sons, Ltd.     

Microencapsulated ammonium polyphosphate with epoxy resin shell: preparation,characterization, and application in EP system

Microencapsulated ammonium polyphosphate with an epoxy resin (EP) shell (MCAPP) was prepared by in situ method, and was characterized by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), and thermgravimetric analysis (TGA). Compared to ammonium polyphosphate (APP), MCAPP has smaller particle sizes and lower water solubility. The effect of MCAPP on the fire performance of EP was studied by using limiting oxygen index (LOI) and UL‐94 tests. When the same loading levels of APP or MCAPP were added into EP, the LOI and UL‐94 tests show similar results. Tensile, bending, and impact strengths of the EP/APP and EP/MCAPP composites were also evaluated, and the results indicate that MCAPP has much less negative influence on the mechanical properties than APP. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of polysiloxane and silane‐modified SiO2 on a novel intumescent flame retardant polypropylene system

The effects of polysiloxane and silane‐modified SiO₂ (M‐SiO₂) on properties of intumescent flame retardant polypropylene (IFR‐PP) have been studied. The results demonstrate that both polysiloxane and M‐SiO₂ could effectively enhance the flame retardancy of the IFR‐PP, despite only 20 wt% loading of IFRs. Remarkably, the polysiloxane can clearly improve the water resistance of IFR‐PP. It can obtain UL‐94 V‐0 rating, and its LOI remains over 34% after the water treatment. The surface tension data, XPS data, and SEM sufficiently prove that the some of polysiloxane transfers to the IFR‐PP surface during processing. The TGA data show that the polysiloxane more effectively enhances the thermal stability of the IFR‐PP at high temperature and increases the char residue. The CONE results reveal that the polysiloxane can clearly change the decomposition behavior of PP and markedly reduce flammability parameters. The homogenous and compact intumescent char layers further confirm that polysiloxane is a very effective silicon‐containing additive for the flame retardancy and water resistance of the IFR‐PP. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of Organo‐Modified Nanosepiolite on Fire Behaviors and Mechanical Performance of Polypropylene Composites

The objective of the study was to investigate the effect of the organo‐modified nanosepiolite (ONSep) on improving the fire safety of polypropylene (PP). The composites based on PP, flame retardant master batch (MB‐FR, 25 wt% PP+50 wt% decabromodiphenyl ether (DBDPE)+25% antimony trioxide (ATO)) and ONSep were prepared via melt blending. The results of the limiting oxygen index (LOI) and vertical burning rating (UL‐94) test indicated that PP/40 wt% MB composites had no rating with seriously dripping phenomenon, while the LOI value was only 22.5. However, as 4 wt% ONSep was added in PP/40 wt% MB composites, the composites achieved UL94 V‐0 rating and the LOI value was 24.3. In comparison, PP/50 wt% MB composites could not reach the V‐0 rating either. The TGA results revealed that the addition of ONSep enhanced the thermal stability of the PP/MB‐FR composites. The cone calorimeter results indicated that the heat release rate, average mass loss rate, smoke production rate and smoke temperature of the PP/40 wt% MB‐FR/4 wt% ONSep composites decreased in comparison with those of PP/40 wt% MB‐FR composites. Simultaneously, the Young modulus and impact strength were also much better improved with the increase of ONSep loading. Therefore, the synergistic flame retardancy of ONSep in PP/MB‐FR matrix significantly containing a halogen based flame retardant (DBDPE) significantly improved the fire safety and mechanical properties of the composites, and allowed to decrease the total amount of brominated fire retardants.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites

The synergistic effect of four different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), boron silicon containing preceramic oligomer (BSi) and lanthanum borate (LaB), were studied to improve the flame retardancy of a polypropylene (PP) intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated by limiting oxygen index (LOI), UL-94 standard, thermogravimetric analysis (TGA) and cone calorimeter tests. The addition of 20 wt% intumescent flame retardant (IFR) improves the flame retardancy by increasing the char formation. According to LOI and UL-94 test, boron compounds show their highest synergistic effect at 1 wt% loading. BPO₄ containing composite shows the highest LOI (30), lowest maximum heat release rate (HRR) and lowest total heat release rate (THR) value. Although the char yield increases as the amount of boron compounds increases, the flame retarding effect decreases. Cone calorimeter and TGA data indicate that the boron compounds are likely to show their synergistic effect by reinforcing the integrity of char which improves its barrier effect rather than increasing the char yield.     

Polyaniline‐coupled graphene/nickel hydroxide nanohybrids as flame retardant and smoke suppressant for epoxy composites

Graphene‐polyaniline/nickel hydroxide ternary hybrid (RGO‐PANI/Ni(OH)₂) was synthesized and incorporated into epoxy resin (EP) to improve the fire retardant property. Thermogravimetric analysis results showed that the RGO‐PANI/Ni(OH)₂ nanohybrid could catalyze the thermal degradation of epoxy matrix that was essential to trigger the char formation. The char yield of the RGO‐PANI/Ni(OH)₂/EP composite was improved compared with that of the samples with graphene and polyaniline only. With 3.0‐wt% RGO‐PANI/Ni(OH)₂, significant reduction in peak heat release rate (40%) and peak smoke production rate (36%) was observed in the cone calorimeter tests. Thermogravimetric analysis/infrared spectrometry (TG‐IR) results indicated that the flammable volatiles of the RGO‐PANI/Ni(OH)₂/EP composite was reduced compared with those of the EP and RGO‐PANI/EP. The superior flame retardant and smoke suppressant behaviors of the RGO‐PANI/Ni(OH)₂ nanohybrid over RGO‐PANI were attributed to the combination of good barrier effect of graphene with catalytic ability of char formation of PANI and metal hydroxide.     

Supramolecular self‐assembly modification of ammonium polyphosphate and its flame retardant application in polypropylene

In order to improve its water resistance and compatibility with polymer matrix, ammonium polyphosphate (APP) is modified with melamine‐trimesic acid (MEL‐TA) aggregates by supramolecular self‐assembly technology. Chemical structure and morphology of APP@MEL‐TA are investigated by Fourier transform infrared spectroscopy and scanning electron microscopy (SEM), respectively. Intumescent flame retardant system of APP@MEL‐TA and charring‐foaming agent is introduced into polypropylene (PP) matrix. The flammability and combustion behavior of PP composites are investigated by limiting oxygen index (LOI), UL‐94 vertical burning, and cone calorimetry tests. In terms of LOI values and cone combustion results, APP@MEL‐TA performs better than pristine APP. Char residue of PP composites is investigated by SEM and Raman spectra. Flame retardant mechanisms are proposed based on thermal decomposition, combustion results, and analysis on char residue.     

An efficient and convenient strategy toward fire safety and water resistance of polypropylene composites through design and synthesis of a novel mono‐component intumescent flame retardant

A novel mono‐component flame‐retardant additive poly (dimethylol melamine piperazine pyrophosphate) defined as PDMPP was synthesized from formaldehyde, melamine, and piperazine pyrophosphate. Its chemical structure was well characterized by Fourier transform infrared spectroscopy, ¹³C and ³¹P solid‐state nuclear magnetic resonance, and elemental analysis tests. PDMPP was incorporated into polypropylene (PP) matrix, and the fire‐retardant performance, thermal properties, and water resistance of PP composites were investigated in detail. PP/23 wt% PDMPP composites before and after water resistance tests both achieved UL‐94V‐0 grade during vertical burning tests, and the limiting oxygen index was slightly declined from 26.7% to 26.3%. Small amount of PDMPP was extracted by hot water, and the weight loss percentage was 0.67% during water resistance tests. The piperazine and triazine rings in PDMPP contributed to a much better char‐forming capability, and then a greatly expanded and coherent char residue was generated during combustion and exhibited excellent isolation effect. The heat release rate, carbon monoxide production, and smoke production rate of the flame‐retarded PP composites before and after water resistance tests were effectively suppressed to a low level. Consequently, the introduction of PDMPP apparently improved the fire safety of PP composites as well as excellent water‐resistant performance.     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.