L-酪氨酸印迹分子的制备及性能研究

利用分子印迹技术采用传统加热法制备出酪氨酸他子印迹聚合物。用红外光谱分析了聚合物结构。研究了印迹他子与功能单体的物质的量对聚合物结合性的影响,吸收效率表征结果显示,与化学组成相同的空白聚合物相比,印迹聚合物具有更高的吸附效率。     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

Characterization of molecularly imprinted polymers employing crosslinkers with nonsymmetric polymerizable groups

Crosslinking monomers have been developed with a combination of methacrylamide and methacrylate or vinyl ketone polymerizable groups that provide molecularly imprinted polymers (MIPs) with improved binding and selectivity. The differential reactivity rates of the polymerizable groups prompted an investigation into the time‐dependent behavior of the crosslinkers, which suggests a new mechanism for MIP formation. The mechanism involves the formation of long sections of linear poly(vinyl ketone) with pendant methacrylamide groups that form a highly crosslinked network in a subsequent step. This has implications for the sequence morphology of polymers, affecting the structure and improving the binding properties of MIPs. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3668–3675, 2004     

Adsorption of carbaryl using molecularly imprinted microspheres prepared by precipitation polymerization

To obtain the desired specific adsorbents for carbaryl to enrichment, separation, and analysis of trace pesticide residues in environmental water, molecularly imprinted polymer (MIP) microspheres were prepared by precipitation polymerization using carbaryl, methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA), azobisisobutyronitrile (AIBN), and acetonitrile as template, functional monomer, cross‐linker, initiator, and porogen, respectively. Molecular modeling software was used to compute rational interaction between the template molecule and function monomer. The adsorption properties of carbaryl in acetonitrile for imprinted microspheres were evaluated by equilibrium rebinding experiments. Scatchard plot analysis revealed that there was one class of binding sites populated in the imprinted polymer microspheres with dissociation constants of 3.3 × 10^?2 mol/l and an apparent maximum number of 1.95 µmol/g. The specificity of the imprinted microspheres was investigated by binding analysis using carbaryl and structurally related carbamate pesticides. The results indicated that the obtained imprinted microspheres showed a good selectivity for carbaryl. Copyright © 2007 John Wiley & Sons, Ltd.     

环氧功能化双功能磁性分子印迹聚合物的合成及其在多糖吸附中的应用

以淀粉为模板，以3-氨基苯硼酸（APBA）和2-丙烯酰胺-2-甲基丙磺酸（AMPS）为功能单体，以过硫酸铵（APS）为引发剂，在水溶液中成功合成了一种识别多糖的双功能分子印迹聚合物（Bi-MMIPs）。采用透射电镜、扫描电镜、傅里叶变换红外光谱等考察了Bi-MMIPs的合成效果。通过吸附试验深入研究了Bi-MMIPs对淀粉的吸附和识别特性。结果表明：Bi-MMIPs成功负载了两种功能单体，且对多糖（淀粉）具有很强的吸附亲和力和特异性识别能力，饱和吸附量达到13.88 mg/g；对于葡聚糖（M_r 5000 Da和70000 Da）的选择性系数分别为2.67和3.77；此外，Bi-MMIPs的印迹因子（α）达到了3.04，且易于再生。在机理上，APBA和AMPS分别提供可逆共价键和氢键，在合成双功能单体中表现出协同效应，可以有效改善模板分子结合位点的空间排列。     

片段/虚拟分子印迹聚合物的应用新进展

分子印迹聚合物(MIPs)是通过模拟酶与底物或抗原抗体特异性结合原理而制备的高分子聚合物,以其结构预定性、识别特异性、制备简便、成本低、耐受性强等优点而被广泛用于样品前处理、传感分析、生物医药、环境/食品分析等多个领域。目前已发展多种策略用于MIPs制备,达到简化制备过程或提高聚合物性能等目的,极大拓宽了MIPs的应用范围。对各种先进印迹策略及其组合使用的探索已成为MIPs制备的研究热点之一。其中,片段印迹策略和虚拟模板印迹策略备受青睐。片段印迹策略是选择目标分子中含有特定官能团的一部分(片段结构)作为模板进行印迹,通过对片段的识别达到对整个分子的识别,能够克服某些目标物不易获得或体积较大不适合作为模板的问题,为印迹易失活、易传染的目标物及整体印迹困难的大分子提供可行的方法。虚拟模板印迹策略是选用与目标物特异性结构相似或相同的其他物质代替目标物作为模板制备MIPs,可在很大程度上解决模板不易获得或较昂贵等问题,以及避免模板可能泄漏对结果造成的影响,尤其适用于目标物造价高、具有感染性、易燃易爆、易降解等不适合作为模板分子的情况。该文选取了最近4年发表在ACS、Elsevier、RSC等数据库约20篇相关文献,综述了片段/虚拟MIPs(FMIPs/DMIPs)的应用新进展。首先,针对蛋白质和微生物检测以及哺乳动物细胞印迹,介绍了FMIPs在生物医药领域的应用,另外介绍了FMIPs在食品分析领域的研究进展。随后,介绍了DMIPs在样品前处理和传感分析领域的应用。在样品前处理中,DMIPs主要作为固相萃取吸附剂进行装柱固相萃取、分散固相萃取、磁固相萃取、基质固相分散萃取等,或作为分子印迹膜材料,用于选择性萃取和富集分离样品中的目标分析物。在传感分析领域,DMIPs主要作为传感器的传感和转导元件,提高化学发光或荧光检测等方法的灵敏度和准确度。最后,对片段印迹和虚拟模板印迹策略的优缺点、区别与联系进行了总结,并展望了这两种策略的发展与应用前景。     

Preparation of magnetic molecularly imprinted polymers for the rapid and selective separation and enrichment of perfluorooctane sulfonate

As a persistent organic pollutant, perfluorooctane sulfonate has drawn a great worldwide attention. In this contribution, a novel material of magnetic molecularly imprinted polymers, based on perfluorooctane sulfonate, as a template, molecule was prepared. The magnetic molecularly imprinted polymers were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, and vibrating sample magnetometry. The adsorption isotherm was measured, and adsorption kinetic tests were conducted. The adsorbents possess high recognition ability (2.460 mg/g) and short adsorption equilibration time (60 min). Besides, they show good specificity and good reusability with the adsorption capacities of adsorbent toward perfluorooctane sulfonate decreasing less than 3% after five adsorption–desorption cycles. The magnetic molecularly imprinted polymers were used successfully in the separation and enrichment of perfluorooctane sulfonate in real water sample and exhibited good prospects in environmental treatment and monitoring.     

Advances in the development of molecularly imprinted polymers for the separation and analysis of proteins with liquid chromatography

This review documents recent advances in the design, synthesis, characterization, and application of molecularly imprinted polymers in the form of monoliths and particles/beads for the use in the separation and analysis of proteins with solid‐phase extraction or liquid chromatography. The merits of three‐dimensional molecular imprinting, whereby the molecular template is randomly embedded in the polymer, and two‐dimensional imprinting, in which the template is confined to the surface, are described. Target protein binding can be achieved by either using the entire protein as a template or by using a protein substructure as template, that is, a peptide, as in the "epitope" approach. The intended approach and strategy then determine the choice of polymerization method. A synopsis has been provided on methods used for the physical, chemical, and functional characterizations and associated performance evaluations of molecularly imprinted and nonimprinted control polymers, involving a diverse range of analytical techniques commonly used for low and high molecular mass analytes. Examples of recent applications demonstrate that, due to the versatility of imprinting methods, molecularly imprinted monoliths or particles/beads can be adapted to protein extraction/depletion and separation procedures relevant to, for example, protein biomarker detection and quantification in biomedical diagnostics and targeted proteomics.     

青霉噻唑酸表面分子印迹聚合物的制备及其吸附性能的考察

针对青霉素药物及乳制品中致敏杂质青霉噻唑酸(PEOA)的特异性分离分析,采用表面印迹聚合法,以青霉噻唑酸为模板分子,制备青霉噻唑酸分子印迹聚合物(PEOA-MIPs)。通过静态吸附、吸附动力学及选择性实验考察其吸附性能,结果显示PEOA-MIPs对青霉噻唑酸有特异的识别能力和快速的传质速率,饱和吸附量为122.78 mg/g,静态吸附和吸附速率分别符合Langmuir模型和准二级动力学方程,表明MIPs的吸附是以化学吸附为主的单分子层吸附。利用扫描电镜(SEM)、红外光谱(FT-IR)和热重分析(TGA)对聚合物进行表征,结果显示聚合物成功接枝在硅胶表面,并具有良好的热稳定性。PEOA-MIPs对PEOA具有特异的识别能力,可用作萃取介质,为建立快速分离分析致敏杂质青霉噻唑酸的方法提供基础。     

核壳结构的萘夫西林磁性分子印迹聚合物微球的制备及性能

以表面修饰双键的Fe₃O₄@SiO₂纳米颗粒为基体,以萘夫西林(nafcillin)为模板,甲基丙烯酸(MAA)为单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用三步升温聚合法合成了核壳结构的萘夫西林磁性分子印迹聚合物。采用傅里叶变换红外光谱仪(FT-IR)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和振动样品磁强计(VSM)对制备的印迹聚合物微球进行了表征,得到的磁性印迹聚合物微球的粒径在320 nm左右,大小均匀,分散性较好,可以在外加磁场下与溶剂实现快速分离。对磁性印迹和非印迹聚合物进行了吸附性能研究,结果表明该印迹聚合物微球对模板分子具有很高的吸附容量(50.7 mg/g),特异性识别性能良好(印迹因子为2.46),有望应用于实际样品中萘夫西林残留量的富集分析。     

Theoretical design,preparation, and evaluation of Ginkgolide B molecularly imprinted polymers

Ginkgolide B is in great demand worldwide on account of its extensive and excellent pharmacological effects, however, it is difficult to separate and purify ginkgolide B. In this study, ginkgolide B molecularly imprinted polymers were prepared by combining software simulation and molecular imprinting technique, and its characterization and adsorption performed evaluation were performed to understand the adsorption behavior of the polymers. The adsorption equilibrium concentration of molecularly imprinted polymers was 0.70 mg/mL, and the adsorption equilibrium time was 4 h. Meanwhile, the adsorption isotherm of the polymers for ginkgolide B fitted well with the Langmuir model, and the adsorption kinetics was in line with the pseudo‐second‐order kinetics. In contrast, the adsorption capacity of molecularly imprinted polymers on ginkgolide B was higher than that of non‐molecular imprinted polymers, with better selectivity and better adsorption after repeated use for six times. The application experiments showed that molecular imprinted polymers have a good adsorption effect in low purity samples. Therefore, the polymers reported herein can be expected to apply in the adsorption and separation of ginkgolide B samples.     

三聚氰胺磁性分子印迹聚合物材料的制备及性能表征

利用溶剂热法通过控制反应时间和温度制得了分散性好和磁性强的Fe3O4,并利用溶胶凝胶法制备得到包覆SiO2的磁性微球(Fe3O4@SiO2)。以三聚氰胺为模板分子,甲基丙烯酸(MAA)为单体,采用本体聚合法制备了磁性分子印迹聚合物(MMIPs)。通过静态吸附实验表明,MMIPs对三聚氰胺的饱和吸附量高达10.22μg/mg,是磁性非印迹聚合物(MNIPs)的1.62倍。粒子扩散模型、Elovich模型和动态吸附实验表明所制得的MMIPs有较好的吸附性能。     

炔雌醇类似物分子印迹聚合物的制备及性能研究

采用沉淀聚合法合成了以炔雌醇类似物17-乙基雌二醇为名义模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂的分子印迹聚合物微球。采用Gaussian 03计算机软件模拟了名义模板与功能单体的相互作用,优选功能单体及配比。利用透射电子显微镜观察了聚合物微球的形貌,通过静态平衡吸附试验研究了此聚合物对自身模板、炔雌醇及雌二醇的结合能力和选择性。结果表明印迹聚合物微球大小比较均匀,外形圆整,对炔雌醇及其类似物均表现出了较高的亲和性和特异性识别能力。     

Efficient synthesis of molecularly imprinted polymers with bio‐recognition sites for the selective separation of bovine hemoglobin

We developed a facile approach to the construction of bio‐recognition sites in silica nanoparticles for efficient separation of bovine hemoglobin based on amino‐functionalized silica nanoparticles grafting by 3‐aminopropyltriethoxylsilane providing hydrogen bonds with bovine hemoglobin through surface molecularly imprinting technology. The resulting amino‐functionalized silica surface molecularly imprinted polymers were characterized using scanning electron microscope, transmission electronic microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. Results showed that the as‐synthesized imprinted polymers exhibited spherical morphology and favorable thermal stability. The binding adsorption experiments showed that the imprinted polymers can reach equilibrium within 1 h. The Langmuir isotherm and pseudo‐second‐order kinetic model fitted the adsorption data well. Meanwhile, the imprinted polymers possessed a maximum binding capacity up to 90.3 mg/g and highly selectivity for the recognition of bovine hemoglobin. Moreover, such high binding capacity and selectivity retained after eight cycles, indicating the good stability and reusability of the imprinted polymers. Finally, successful application in the selective recognition of bovine hemoglobin from a real bovine blood sample indicated that the imprinted polymers displayed great potentials in efficient purification and separation of target proteins.     

分子印迹聚合物在抗生素残留测定中的应用

抗生素的滥用及残留对生物体和环境造成极大危害,其含量低、种类多、基质复杂,通常需要进行样品前处理结合色谱分析以实现灵敏测定。分子印迹聚合物(MIPs)能选择性识别、有效富集目标分析物并消除干扰,已广泛用于抗生素的样品前处理中。该文对MIPs制备中面临的挑战进行了总结;对2016年以来抗生素MIPs的固相萃取应用进行了综述和展望,主要包括固相萃取、分散固相萃取、磁固相萃取、基质固相分散萃取、固相微萃取、搅拌棒吸附萃取。此外,该文重点介绍了抗生素MIPs的印迹新策略,如多模板、多功能单体、虚拟模板、刺激响应、亲水性印迹等。最后,该文对抗生素MIPs的制备和前处理应用进行了展望。     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Photocontrolled extraction of uric acid from biological samples based on photoresponsive surface molecularly imprinted polymer microspheres

We aim to develop novel photoresponsive surface molecularly imprinted polymer (SIMP) microspheres, an SiO₂‐SIMP, for the photocontrolled extraction of uric acid from biological samples. The SiO₂‐SMIP was prepared on silica microspheres by surface polymerization and characterized by using scanning electron microscopy, transmission electron microscopy, FTIR spectroscopy, thermogravimetric analysis, nitrogen adsorption–desorption analysis, and UV‐visible spectroscopy. The SiO₂‐SMIP microspheres showed a photocontrolled uptake and release of uric acid in NaH₂PO₄ buffer upon alternate irradiation at 365 and 440 nm. The SiO₂‐SMIP microspheres were able to photocontrollably extract uric acid from complicated biological samples for concentration analysis with no significant interference encountered and it exhibited very good recognition ability and fast binding kinetics toward uric acid.     

Surface molecularly imprinted polymers prepared by two‐step precipitation polymerization for the selective extraction of oleanolic acid from grape pomace extract

Surface molecularly imprinted polymers were successfully prepared by a novel two‐step precipitation polymerization method. The first‐step allowed the formation of 4‐vinylpyridine divinylbenzene and trimethylolpropane trimethacrylate copolymeric microspheres. In the second‐step precipitation polymerization, microspheres were modified with a molecularly imprinting layer of oleanolic acid as template, methacrylic acid as functional monomer, and divinylbenzene/ethylene glycol dimethacrylate as cross‐linker. The obtained polymers had an average diameter of 4.43 μm and a polydispersity index of 1.011; adsorption equilibrium was achieved within 40 min, with adsorption capacity reaching 27.4 mg/g. Subsequently, the polymers were successfully applied as the adsorbents of molecularly imprinted solid‐phase extraction to separate and purify the oleanolic acid from grape pomace. The content of oleanolic acid in the grape pomace extract was enhanced from 13.4 to 93.2% after using the molecularly imprinted solid‐phase extraction process. This work provides an efficient way for effective oleanolic acid separation and enrichment from complex matrices, which is especially valuable in industrial production.     

Selective extraction of morphine from biological fluids by magnetic molecularly imprinted polymers and determination using UHPLC with diode array detection

The determination of morphine concentration in the blood and urine is necessary for patients and recruitment purposes. Herein, a magnetic molecularly imprinted polymer for selective and efficient extraction of morphine from biological samples was synthesized by using a core–shell method. Fe₃O₄ nanoparticles were coated with SiO₂‐NH₂. The molecularly imprinted polymer was coated on the Fe₃O₄/SiO₂‐NH₂ surface by the copolymerization of methacrylic acid and ethylene glycol dimethacrylate in the presence of morphine as the template molecule. The morphological and magnetic properties of the polymer were investigated. Field‐emission scanning electron microscopy indicated that the prepared magnetic polymer is almost uniform. The saturation magnetization values of Fe₃O₄ nanoparticles, Fe₃O₄/SiO₂‐NH₂, and the magnetic polymer were 48.41, 31.69, and 13.02 emu/g, respectively, indicating that all the particles are superparamagnetic. Kinetics of the adsorption of morphine on magnetic polymer were well described by second‐order kinetic and adsorption processes and well fitted by the Langmuir adsorption isotherm, in which the maximum adsorption capacity was calculated as 28.40 mg/g. The recoveries from plasma and urine samples were in the range of 84.9–105.5 and 94.9–102.8%, respectively. By using the magnetic molecularly imprinted polymer, morphine can selectively, reliably, and in low concentration be determined in biological samples with high‐performance liquid chromatography and UV detection.