Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis of poly(o‐cresol) by oxidative coupling polymerization of o‐cresol

The oxidative coupling polymerization of o‐cresol was investigated using various 2‐substituted pyridine/CuCl catalysts under an oxygen atmosphere, in which 2‐phenylpyridine/CuCl and 2‐(p‐tolyl)pyridine/CuCl catalysts yielded poly(o‐cresol)s with higher regioselectivity for 1,4‐coupling. These polymerizations produced branched and crosslinked polymers in the later stages of polymerization. These polymers showed good thermal properties, such as 5% weight loss temperatures of up to 406 °C and glass transition temperatures of up to 151 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 878–884     

Surface segregation of highly branched polymer additives in linear hosts

Entropy‐driven segregation of various branched and hyperbranched polymeric additives in chemically similar linear polymer hosts is studied using self‐consistent (SCF) mean‐field lattice simulations. The simulations account for the effect of molecular architecture on local configurational entropy in the blends, but ignores the effect of architecture on local density and blend compressibility. Star, dendrimer, and comb‐like additives are all found to be enriched at the surface of chemically identical linear host polymers. The magnitude of their surface excess increases with increased number of chain ends and decreases with increased segmental crowding near the branch point. Provided the number of arms and molecular weight of the branched additives are maintained constant, we find that the simplest branched architecture, the symmetric star, exhibits the strongest preference for the surface of binary polymer blends. We show that a single variable, here termed the “entropic driving force density,” controls the relative surface affinities of branched additives possessing a wide range of architectures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1788–1801, 2008     

Effect of a Set of Acids and Polymerization Conditions on the Architecture of Polycarbonates Obtained via Ring Opening Polymerization

Polycarbonate‐based polymers with a well‐defined architecture have become interesting materials due to their large range of applications. Ring opening polymerization (ROP) has been largely applied to make branched polycarbonates. The polymer architectures obtained via this method are strictly related with the polymerization mechanisms involved which depend on the polymerization conditions chosen. Hereby, we evaluate the catalytic activity of three acids, fumaric, trifluoroacetic, and methanesulfonic on the Cationic ROP of trimethylene carbonate (TMC) over a trifunctional initiator, trimethylol propane (TMP), under different reaction conditions. In‐detail characterization of the polymers showed the co‐existence of two polymerization mechanisms: the activated monomer (AM), which produces a tri‐armed branched polycarbonate with inclusion of the TMP initiator (TMP‐PTMC), and a combined AM/Activated Chain End (ACE) mechanism, which produces a linear polycarbonate (L‐PTMC). Such mixtures were identified for nearly all the reaction variables investigated, together with other side reactions. Upon optimization of the synthesis, the polymerizations in toluene with TFA at 35 °C and equimolar acid/initiator ratio were optimal, avoiding side reactions, but still resulting in a polymer mixture composed of ～69% TMP‐PTMC and 31% of a polycarbonate linear polymer. The occurrence of such mixed polymer architectures is commonly overlooked in literature regarding CROP of branched polycarbonates. We demonstrate the importance of performing a full characterization for a successful detection of polymer mixtures having different (number of) end‐functionalities, which are critical for further use in advanced applications, such as in the biomedical or pharmaceutical filed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1502–1511     

Rheological properties of HyperMacs—long‐chain branched analogues of hyperbranched polymers

HyperMacs are long chain branched analogues of hyperbranched polymers, differing only in the sense that they have polymer chains, rather than monomers between branch points. Although the building blocks for HyperMacs and AB₂ macromonomers can be well defined in terms of molecular weight and polydispersity, the nature of the coupling strategy adopted for the synthesis of the HyperMacs results in branched polymers with a distribution of molecular weights and architectures. Melt rheology showed polystyrene HyperMacs to be thermorheologically simple, obeying William–Landel–Ferry behavior. Zero shear viscosities of the polymers were shown to increase with average molecular weight and the melts display shear‐thinning behavior. HyperMacs showed little evidence for relaxation by reptation and the rheological behavior agreed well with the Cayley tree model for hierarchical relaxation in tube models of branched polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2762–2769, 2007     

In Situ Generation of Fullerene from a Poly(fullerene)

This article appraises the thermal, photo‐ and photo‐oxidative stability of poly(fullerene)‐alt‐[bismethylbenzene)]s (PFBMBs) prepared by the atom transfer radical addition polymerization (ATRAP) with particular attention paid to their use as additives in organic photovoltaic devices. PFBMBs are of interest due to their well‐defined structures based on alternating, main‐chain, fullerene‐methylene links. This work shows by way of a wide range of characterization techniques and a small library of PFBMBs with varying side chains, however, that PFBMBs are relatively unstable. Given that prior work has shown that other main‐chain fullerene polymers, such as poly(pyrrolidinofullerene)s, are inherently stable, we suggest a degradation mechanism specific to the fullerene‐methylene links of PFBMBs, which explains their unusual behavior. This work suggests that polymers based on fullerene each have their own specific stabilities and qualities and that PFBMBs might be of more use in purposes other than OPVs where in situ delivery of fullerene is required, for example, in medical applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1434–1452     

Combination of nitroxide‐mediated polymerization and SET‐LRP for the synthesis of high molar mass branched and star‐branched poly(n‐butyl acrylate) characterized by size exclusion chromatography and rheology

Branched and star‐branched polymers were successfully synthesized by the combination of two successive controlled radical polymerization methods. A series of linear and star poly(n‐butyl acrylate)‐co‐poly(2‐(2‐bromoisobutyryloxy) ethyl acrylate) statistical copolymers, P(nBA‐co‐BIEA)_x, were first synthesized by nitroxide‐mediated polymerization (NMP at T > 100 °C). The subsequent polymerization of n‐butyl acrylate by single electron transfer‐living radical polymerization (SET‐LRP at T = 25 °C), initiated from the brominated sites of the P(nBA‐co‐BIEA)_x copolymer, produced branched or star‐branched poly(n‐butyl acrylate) (PnBA). Both types of polymerizations (NMP and SET‐LRP) exhibited features of a controlled polymerization with linear evolutions of logarithmic conversion versus time and number‐average molar masses versus conversion for final M_n superior to 80,000 g mol^?1. The branched and star‐branched architectures with high molar mass and low number of branches were fully characterized by size exclusion chromatography. The Mark–Houwink Sakurada relationship and the analysis of the contraction factor (g′ = ([η]_branched/[η]_linear)_M) confirmed the elaboration of complex PnBA. The zero‐shear viscosities of the linear, star‐shaped, branched, and star‐branched polymers were compared. The modeling of the rheological properties confirmed the synthesis of the branched architectures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mean‐Field Calculation of MZ for Randomly Branched Condensation Polymers

The mean‐field theory of Flory–Stockmayer for randomly branched polymers in the regime of strong chain overlap is extended to a calculation of M_Z via the recursive method of Miller and Macosko. The formalism includes condensation polymers, copolymers, chain stoppers, bifunctional diluents to control the chain length between branch points, multiple branching agents, and arbitrary stoichiometries. M_Z closely approximates the largest branched polymer in the system and is therefore a key parameter describing static scaling behavior near the gel point. Nonuniversal static scaling of M_Z is illustrated with examples from the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1415–1422     

Designing Branched Deoxybenzoin Polyesters as Polymeric Flame Retardants

AB₂ monomers present opportunities to conduct one‐pot syntheses of highly branched or “hyperbranched” polymers, which are known for their distinct physical and chemical properties relative to linear polymers. This paper describes the synthesis of a deoxybenzoin‐containing AB₂ monomer and its use in step‐growth polymerization to prepare branched aromatic polyesters. Highly soluble deoxybenzoin polymers were obtained with degrees of branching reaching 0.36 and estimated molecular weights approaching 20 kDa. The phenolic chain ends of the polymer allowed for post‐polymerization modification by silylation and esterification chemistry. TGA and microscale combustion calorimetry revealed these novel aromatic polyesters to possess the critically important characteristics of flame‐retardant polymers, such as high char yield and low heat release. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1765–1770     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Precise synthesis of well‐defined dendrimer‐like star‐branched polymers by iterative methodology based on living anionic polymerization

Dendrimer‐like star‐branched polymers recently developed as a new class of hyperbranched polymers, which resemble well‐known dendrimers in branched architecture, but comprise polymer chains between junctions, are reviewed in this highlight article. In particular, we focus on the precise synthesis of various dendrimer‐like star‐branched polymers and block copolymers by the recently developed methodology based on iterative divergent approach using living anionic polymers and 1,1‐bis(3‐tert‐butyldimethylsilyloxymethylphenyl)ethylene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6659–6687, 2006     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Synthesis of Branched Polymer Architectures from Molecular Weight and Branching Distributions for Radical Polymerisation with Long‐Chain Branching,Accounting for Topology‐Controlled Random Scission

Branched polymers like LDPE are known to possess a wide range of architectures. In this paper a modelling approach is developed, describing the relation between architectures, chemistry and reactor conditions with the general objective of improving characterisation and controlling visco‐elastic properties. More specifically, the particular scission kinetics of branched molecules as strongly contrasting with linear scission is described. A new method to synthesise branched architectures is developed as an alternative to full Monte Carlo (MC) sampling. It employs MC sampling for coupling of primary polymers only. Graph theory is used as an efficient storage method containing all topological information of individual molecules. The algorithm synthesises molecules for any given combination of chain length (n) and number of branches (N). The explicit and detailed knowledge of branched architectures allows finding the correct topological scission kinetics. Distributions of fragment lengths and numbers of branches on fragments after scission are obtained, showing a preference for short and long fragments. Approximate functions describing this have been implemented in another model, predicting molecular weight (MWD) and degree of branching (DBD) distributions using a Galerkin finite element method. Topological scission is seen to give MWD broadening and a higher branching density for long chains. Distributions of longest end‐to‐end distances could be computed for all architectural alternatives for given n, N. In conclusion, it is demonstrated that this method yields distributions of architectures consistent with MWD/DBD for radical polymerisation with long‐chain branching and random scission.     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Star‐shaped siloxane polymers with various cyclic cores: Synthesis and properties

Six new star‐shaped polydimethylsiloxane (PDMS) with various cyclic siloxane cores were synthesized by the “grafting onto” method. The polymers obtained feature low dispersity and well‐defined structures. Two of them, Q ₈ ‐PDMS and D ₁₂ ‐PDMS , have a three‐dimensional spatial structure traditional for star‐shaped polymers where the arms are arranged in all directions from the branching center. The other four polymers, D ₄ ‐PDMS – D ₈ ‐PDMS , have quite a different spatial geometry (cis‐structure) where all the PDMS‐arms are arranged on one side of the branching center plane. Such star‐shaped structures were not reported before. The structures and purity of the polymers obtained were confirmed using a set of physicochemical methods of analysis. The effect of the macromolecule structure on the properties of the target polymers was identified. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Recent progress on cyclic polymers: Synthesis,bioproperties, and biomedical applications

Polymer topologies exert a significant effect on its properties, and polymer nanostructures with advanced architectures, such as cyclic polymers, star‐shaped polymers, and hyperbranched polymers, are a promising class of materials with advantages over conventional linear counterparts. Cyclic polymers, due to the lack of polymer chain ends, have displayed intriguing physical and chemical properties. Such uniqueness has drawn considerable attention over the past decade. The current review focuses on the recent progress in the design and development of cyclic polymer with an emphasis on its synthesis and bio‐related properties and applications. Two primary synthetic strategies towards cyclic polymers, that is, ring‐expansion polymerization and ring‐closure reaction are summarized. The bioproperties and biomedical applications of cyclic polymers are then highlighted. In the end, the future directions of this rapidly developing research field are discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1447–1458     

Arborescent polypeptides from γ‐benzyl l‐glutamic acid

The synthesis of arborescent polymers with poly(γ‐benzyl L‐glutamate) (PBG) side chains was achieved through successive grafting reactions. The linear PBG building blocks were produced by the ring‐opening polymerization of γ‐benzyl L‐glutamic acid N‐carboxyanhydride initiated with n‐hexylamine. The polymerization conditions were optimized to minimize the loss of amino chain termini in the reaction. Acidolysis of a fraction of the benzyl groups on a linear PBG substrate and coupling with linear PBG using a carbodiimide/hydroxybenzotriazole promoter system yielded a comb‐branched or generation zero (G0) arborescent PBG. Further partial deprotection and grafting cycles led to arborescent PBG of generations G1 to G3. The solvent used in the coupling reaction had a dramatic influence on the yield of graft polymers of generations G1 and above, dimethylsulfoxide being preferable to N,N‐dimethylformamide. This grafting onto scheme yielded well‐defined (M_w/M_n ≤ 1.06), high molecular weight arborescent PBG in a few reaction cycles, with number‐average molecular weights and branching functionalities reaching over 10⁶ and 290, respectively, for the G3 polymer. α‐Helix to coiled conformation transitions were observed from N,N‐dimethylformamide to dimethyl sulfoxide solutions, even for the highly branched polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5270–5279     

Antimicrobial anilinium polymers: The properties of poly(N,N‐dimethylaminophenylene methacrylamide) in solution and as coatings

Antimicrobial polymers have been widely reported to exert strong biocidal effects against bacteria. In contrast with antimicrobial polymers with aliphatic ammonium groups, polymers with anilinium groups have been rarely studied and applied as biocidal materials. In this study, a representative polymer with aniline side functional groups, poly(N,N‐dimethylaminophenylene methacrylamide) (PDMAPMA), was explored as a novel antimicrobial polymer. PDMAPMA was synthesized and its physicochemical properties evaluated. The methyl iodide‐quaternized polymer was tested against the Gram‐positive Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of 16–32 and 64–128 μg mL^?1, respectively. Against the Gram‐negative Escherichia coli, the MIC and MBC were both 64–128 μg mL^?1. To broaden the range of applications, PDMAPMA was coated on substrates via crosslinking to endow the surface with contact‐kill functionality. The effect of charge density of the coatings on the antimicrobial behavior was then investigated, and stronger biocidal performance was observed for films with higher charge density. This study of the biocidal behavior of PDMAPMA both in solution and as coatings is expected to broaden the application of polymers containing aniline side groups and provide more information on the antimicrobial behavior of such materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1908–1921     

Studies on equilibrium structures of complex polymers in condensed systems

The thermodynamic‐equilibrium structures of four copolymers with different chain architectures are compared. They are AB diblock, BAB triblock, and ABC triblock copolymers and AB₂ star‐branched graft copolymers. Their morphological transitions meaningfully differ from one another, reflecting the difference in chain architecture. Two‐component polymers barely form bicontinuous structures; however, symmetric ABC triblock copolymers easily form tricontinuous structures composed of two surfaces parallel to a Gyroid minimal surface. All four ABC equilibrium structures have a superlattice structure. Block polymer chains in microphase‐separated bulk are elongated in the longitudinal direction in lamellar microphases. Although the deformation manner of the chains restricted in microphases depends on the chain architectures, the volumes of the deformed coils are always the same as those of the unperturbed chains regardless of their architectures. The measured polystyrene/poly(2‐vinylpyridine) interfacial thickness is fairly thin, but the observed value is much thicker than the theoretically predicted one. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1645–1655, 2000