烯丙基作为保护基在修饰寡核苷酸合成中的应用

研究了烯丙基作为核苷糖环羟基保护基在寡核苷酸及其类似物的合成中应用的可能性。烯丙基保护基可用PdCl2在温和条件下脱除,适合应用于对碱不稳定的寡核苷酸的合成。应用烯丙基保护基成功地合成了三胸苷二碳酸酯和二胸苷亚硫酸酯。     

含醛基及叠氮基氮杂糖中间体的合成

以D-甘露糖为原料,分别利用苄胺双取代和aza-Wittig反应,再经氧化和亲核取代反应,合成了带保护基的含叠氮基及醛基的五元及六元氮杂糖中间体,对相关反应条件、基团保护及反应机理等进行了探讨,并提供了一种选择性脱除三苯甲基保护基的方法.     

甘草查耳酮的分离、结构与全合成

从新疆产胀果甘草(Glycyrrhiza inflata But)中分得甘草查耳酮(1),C₂₁ H₂₂ O₄,熔点136～138℃,经光谱分析及碱裂解产物的分析与合成以及1的全合成证明为一新型查耳酮——2-甲氧基-4,4'-二羟基-5-α,α-二甲烯丙基查耳酮.碱裂解产物为对羟基苯乙酮与3-α,α-二甲烯丙基-4-羟基-6-甲氧基苯甲醛(2),C₁₃ H₁₆ O₃,熔点187～188℃.后者经甲基化、氢化与高锰酸钾氧化得3-α,α-二甲丙基-4,6-二甲氧基苯甲酸(3),C₁₄ H₂₀ O₄,熔点124～125℃.1,2,3的结构均经合成证明.2-甲氧基-4-羟基-苯甲醛与溴代异戊烯作用得异戊烯醚(4),再经Claisen 重排得2.2与对羟基苯乙酮缩合成1.探索了提高 Claisen 重排产率的较佳条件.     

电化学方法固定CO2用于2-羟基-2-(4-甲氧基苯基)-丙酸甲酯的合成

在一室型电解池中, 以饱和CO₂的N,N-二甲基甲酰胺(DMF)为溶液, Mg为牺牲阳极, 不锈钢、钛、铜、镍和银为工作电极, 通过电化学方法固定CO₂, 在恒电流电解的条件下研究了对甲氧基苯乙酮的电羧化反应, 得到了重要的有机合成中间体2-羟基-2-(4-甲氧基苯基)-丙酸甲酯. 电羧化产率受支持电解质种类、电极材料、电流密度、电解电量和反应温度等影响. 经过反应条件的优化, 目标产物在恒定电流密度为5.0 mA/cm²的条件下产率达到63%. 同时, 以玻碳电极-Pt丝螺旋电极-Ag/AgI/I^-为三电极体系, 研究了对甲氧基苯乙酮的电化学行为, 根据底物在通入CO₂前后循环伏安图的变化推测了对甲氧基苯乙酮的电羧化反应机理.     

Sc(OTf)3催化δ⁃腈基对亚甲基苯醌的1,6⁃共轭烯丙基化: 烯丙基二芳基乙腈类化合物的合成

将三氟甲烷磺酸钪[Sc(OTf)₃]用于催化δ-腈基-δ-芳基取代的对亚甲基苯醌与烯丙基硅烷的1,6-共轭加成反应, 快速制备了一系列含有四级碳中心的烯丙基取代二芳基乙腈类化合物. 该反应操作简单、 条件温和, 具有了良好的底物范围和官能团兼容性, 同时腈基和烯丙基可进行后期衍生化, 展示出良好的适用性.     

4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔的合成机理和电子结构的理论研究

采用密度泛函理论中的广义梯度近似(DFT/GGA)方法, 在PW91/DNP 水平上研究了4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔在PdCl₂(PPh₃)₂ 催化下的合成机理. 优化了反应过程中的反应物、中间体、过渡态和产物, 通过能量分析结果证实了中间体和过渡态的真实. 在同样的方法和精度研究了4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔在没有催化剂下的合成机理. 通过计算结果得到此反应在有PdCl₂(PPh₃)₂ 催化情况下的活化能小于没有催化剂情况下的活化能, 从而证明了PdCl₂(PPh₃)₂ 催化剂的催化活性. 采用密度泛函理论与周期性平板模型相结合的方法, 研究了产物P 在TiO₂(100)表面的吸附, 通过Mulliken charge 和前线轨道分析表明: 当P 吸附在TiO₂(100)表面时, P 向TiO₂(100)表面转移0.692 e 电荷, 前线轨道能隙变窄. 理论预测的结果与实验值吻合.     

钯催化下杂芳基溴代物与偕二氟烯丙基硼试剂的交叉偶联反应

使用二叔丁基苯基膦预配位的氯化钯(P(t-Bu)₂Ph)₂·PdCl₂为催化剂,实现了钯催化下偕二氟烯丙基硼试剂与杂芳基溴代物的偶联反应.该方法不仅体系简单,反应效率高,区域选择性优秀,可以克量级制备产物,而且具有良好的官能团兼容性,适用于一系列不同类型的杂环底物,为合成偕二氟烯丙基杂芳烃化合物提供了一种高效方法.     

三苯甲基醚直接转化成丙酮化合物的反应

介绍了一种新的高效的由三苯甲基醚直接生成丙酮化合物的方法, 也就是使三氟乙酸条件下脱三苯甲基的反应和生成丙酮化合物的反应在一个反应瓶中同时进行, 使脱三苯甲基作用后生成的醇继续反应得到高产率的丙酮化合物. 这种方法对于分子中同时含有对酸敏感的其他官能团的三苯甲基醚分子的脱保护非常有用.     

5′-0-三苯甲基核苷衍生物的微波合成

以DMF为溶剂,二甲氨基吡啶为碱,微波辐射下核苷衍生物与三苯甲基氯反应合成了8种选择性羟基保护的5′-O-三苯甲基核苷衍生物,收率67%～87%,其结构经1H NMR和元素分析表征.     

新型含吡唑环的N-甲氧基氨基甲酸甲酯类化合物的设计、合成及生物活性

以苯(吡啶)乙/丙酮类化合物为原料, 经酯化、环化和缩合三步制得新型含吡唑环的N-甲氧基氨基甲酸甲酯类化合物3a~3r, 化合物及其中间体的化学结构经红外光谱、核磁共振谱及元素分析确认. 生物活性结果表明, 化合物3在400 mg/L下分别对水稻稻瘟病、黄瓜霜霉病和小麦白粉病具有很好的防治效果. 对水稻稻瘟病, R₁为甲基或甲氧基取代的苯基时活性最好; 对于黄瓜霜霉病和小麦白粉病, R₁为苯基或甲基取代苯基的化合物杀菌活性优于其它化合物, R₂为甲基的化合物杀菌活性优于R₂为氢的化合物.     

Synthesis of beta-P,N aminophosphines and coordination chemistry to Pd(II). X-ray structures of [PdCl2(Ph2PCH(Ph)NHPh-kappaP,kappaN)] and PdCl(eta3-C3H5)(Ph2PCH2CH(Ph)NHPh-kappaP)

The reaction of the C=N bond in PhCH=NPh with the carbanionic species Ph2PCH2-, leading to the N-phenyl beta-aminophosphine Ph2PCH2CH(Ph)NHPh, L1, is described. This molecule reacts with different organic electrophiles to afford related compounds Ph2PCH2CH(Ph)NPhX (X = SiMe3, L2; COPh, L4), [Ph2MePCH2CH(Ph)NHPh]+(I-), L3, and [Ph2PCH2CH(Ph)N(Ph)CO]2, L5, containing two amido and two phosphino functions. The coordination properties of L1, L2, and L4 have been studied in palladium chemistry. The X-ray structure of [PdCl2(Ph2PCH2CH(Ph)NHPh-kappaP,kappaN)] shows the bidentate coordination mode for the L1 ligand with equatorial C(Ph)-N(Ph) phenyl groups. [PdCl2(Ph2PCH2CH(Ph)NHPh-kappaP,kappaN)] crystallizes at 298 K in the space group P2(1)/n with cell parameters a = 10.689(2) A, b = 21.345(3) A, c = 12.282(2) A, beta = 90.294(12) degrees, Z = 4, D(calcd) = 1.526. The reaction between 2 equiv of L1 and [PdCl(eta3-C3H5)]2 affords the [PdCl(eta3-C3H5)(Ph2PCH2CH(Ph)NHPh-kappaP)] complex in which an unexpected N-H.Cl intramolecular interaction has been observed by an X-ray diffraction analysis. [PdCl(eta3-C3H5)(Ph2PCH2CH(Ph)NHPh-kappaP)] crystallizes at 298 K in the monoclinic space group Cc with cell parameters a = 10.912(1) A, b = 17.194(2) A, c = 14.169(2) A, beta = 100.651(9) degrees, Z = 4, D(calcd) = 1.435. Neutral and cationic alkyl or allyl palladium chloride complexes containing L1 are also reported as well as a neutral allyl palladium chloride complex containing L4. Variable-temperature 31P[1H] NMR studies on the allyl complexes show that the eta3/eta1 allyl interconversion is enhanced by a positive charge and also by a N-H.Cl intramolecular interaction.     

L‐arabinitol‐based functional polyurethanes

Three new polymerizable diols, based on mono‐, di‐, and tri‐O‐allyl‐L ‐arabinitol derivatives, were prepared from L ‐arabinitol as versatile materials for the preparation of tailor‐made polyurethanes with varied degrees of functionalization. Their allyl functional groups can take part in thiol‐ene reactions, to obtain greatly diverse materials. This “click” reaction with 2‐mercaptoethanol was firstly studied on the highly hindered sugar precursor 2,3,4‐tri‐O‐allyl‐1,5‐di‐O‐trityl‐L ‐arabinitol, to apply it later to macromolecules. A polyurethane with multiple pendant allyl groups was synthesized by polyaddition reaction of 2,3,4‐tri‐O‐allyl‐L ‐arabinitol with 1,6‐hexamethylene diisocyanate, and then functionalized by thiol‐ene reaction. The coupling reaction took place in every allyl group, as confirmed by standard techniques. The thermal stability of the novel polyurethanes was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). This strategy provides a simple and versatile platform for the design of new materials whose functionality can be easily modified. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tandem intramolecular silylformylation and silicon-assisted cross-coupling reactions. synthesis of geometrically defined alpha,beta-unsaturated aldehydes

The palladium- and copper-catalyzed cross-coupling reactions of cyclic silyl ethers with aryl iodides are reported. Silyl ethers 3 were readily prepared by intramolecular silylformylation of homopropargyl silyl ethers 2 under a carbon monoxide atmosphere. The reaction of cyclic silyl ethers 3with various aryl iodides 7 in the presence of [(allyl)PdCl](2), CuI, a hydrosilane, and KF.2H(2)O in DMF at room temperature provided the alpha,beta-unsaturated aldehyde coupling products 8 in high yields. The need for copper in this process suggested that transmetalation from silicon to copper is an important step in the mechanism. Although siloxane 3 and the product 8 are not stable under basic conditions, KF.2H(2)O provided the appropriate balance of reactivity toward silicon and reduced basicity. The addition of a hydrosilane to [(allyl)PdCl](2) was needed to reduce the palladium(II) to the active palladium(0) form.     

Using a tripod as a chiral chelating ligand: chemical exchange between equivalent molecular structures in palladium catalysis with 1,1,1-tris(oxazolinyl)ethane ("trisox")

Threefold symmetrical chiral podands may simplify the stereochemistry of key catalytic intermediates for cases in which they only act as bidentate ligands. This applies to systems in which chemical exchange between the different kappa2-coordinated forms takes place and in which the non-coordinated sidearm may play a direct or indirect role at some earlier or later stage in the catalytic cycle. Palladium(II)-catalysed allylic substitutions provide appropriate test reactions along these lines. A series of neutral dichloropalladium(II) complexes, [PdCl2(iPr-trisox)] (1a), [PdCl2(Ph-trisox)] (1b), [PdCl2(Bn-trisox)] (1c) and [PdCl2(Ind-trisox)] (1d) (trisox=1,1,1-tris(oxazolinyl)ethane) were synthesised by reaction of the respective trisox derivative with [PdCl2(PhCN)2] and characterised inter alia by 15N NMR spectroscopy. Direct detection of the heteronuclei without isotope enrichment and with "normal" sample concentrations was achieved with the aid of a cryogenically cooled NMR probe on a 600 MHz NMR spectrometer. Whereas the 15N nuclei of the coordinated oxazoline rings resonate at delta=160-167 ppm and appear as two singlets due to their diastereotopicity, the signal assigned to the dangling oxazoline "arm" is observed at delta=238-240 ppm. Variable-temperature NMR studies along with a systematic series of magnetisation transfer experiments established exchange between ligating and non-ligating oxazoline rings. Reaction of [Pd(allyl)(cod)]BF4 (cod=cyclooctadiene) with Ph-trisox in CH(2)Cl(2) gave the corresponding allyl complex 2, for which fast exchange between the three oxazoline heterocycles as well as between the exo and endo diastereomers was observed along with a very slow eta3-eta1-eta3 process of the allyl fragment (magnetisation transfer). Palladium(0) complexes were prepared by reaction of trisox derivatives or sidearm-functionalised BOX (BOX=bis(oxazolinyl)dimethylmethane) ligands with [Pd(nbd)(alkene)] (nbd=norbornadiene, alkene=maleic anhydride or tetracyanoethylene). X-ray diffraction studies of the iPr-trisox and Ph-trisox complexes (3a and 3b) established Y-shaped trigonal planar coordination geometries with the trisox ligand coordinated in a bidentate fashion, whilst the pi-coordinated maleic anhydride ligand adopts one of the two possible diastereotopic orientations. As the catalytic test reaction, the allylic alkylation of 1,3-diphenylprop-2-enyl acetate substrate with dimethyl malonate as nucleophile (in the presence of N,O-bis(trimethylsilyl)acetamide) was investigated for the trisox derivatives, their BOX analogues, and a series of less symmetric "sidearm" functionalised bisoxazolines. The trisoxazoline-based catalysts generally induce a better enantioselectivity compared to their bisoxazoline analogues and display significant reduction of the induction period as well as rate enhancement.     

Palladium-catalyzed amination of allyl alcohols

An efficient catalytic amination of aryl-substituted allylic alcohols has been developed. The complex [(η(3)-allyl)PdCl](2) modified by a bis phosphine ligand, L, has been used as catalyst in the reaction that afforded a wide range of allyl amines in good to excellent yield under mild conditions.     

高聚物负载型双金属催化剂催化氢转移有机卤化物脱卤

 以甲酸钠为氢转移试剂,以聚乙烯基吡咯烷酮负载PdCl2和其它金属盐制成双金属催化剂PVP－PdCl2－MXn,用于催化有机卤化物脱卤．与负载型单金属催化剂PVP－PdCl2相比,PVP－PdCl2－CdCl2和PVP－PdCl2－HgCl2对氯代芳烃脱氯有高得多的催化活性和脱氯选择性,且偶联副产物显著减少;以对氯苯胺为底物时,双金属催化下的反应时间缩短为单金属催化下的1／8,而脱氯产物收率提高25倍;底物为对氯甲苯时,双金属催化下的偶联副产物仅为单金属催化下的1／390．用IR和TEM技术对PVP负载型金属催化剂进行了表征,并讨论了双金属协同脱卤作用．     

Synthesis of networked polymers by crosslinking reactions of polybenzoxazine bearing allyl group in the side chain

A polybenzoxazine bearing allyl group in the side chain was synthesized by the ring‐opening polymerization of N‐allyl‐benzoxazine and was crosslinked by the two different processes, (1) thermally induced oligomerization of the allyl side chains and (2) radical addition of dithiol (thiol‐ene reaction) to the allyl side chains. The former process was promoted by adding 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane as a radical source, leading to the improved yield of the networked polymer isolated as acetone‐insoluble fraction. The thiol‐ene reaction with using 1,6‐hexanedithiol was also an efficient method for crosslinking the polybenzoxazine. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of a novel uridine analogue and its use in attempts to form new cyclonucleosides using ring-closing metathesis

One novel nucleoside analogue having a hex-5-enyl group and an allyl group in the 5′-C and 3-N position was synthesized regio- and diastereoselectively from d-glucose in twelve steps. In order to reach a particular conformation of nucleosides the nucleoside formation of restricted cyclonucleoside analogues was studied via Ring-Closing Metathesis.     

Highly stereoselective synthesis of (Z)-1,2-dihaloalkenes by a Pd-catalyzed hydrohalogenation of alkynyl halides

An unprecedented Pd-catalyzed hydrohalogenation of alkynyl halides for the regio- and stereoselective synthesis of (Z)-1,2-dihaloalkenes has been realized using [(allyl)PdCl](2) as the catalyst and cis,cis-1,5-cyclooctadiene as the ligand. The advantages of this protocol are well illustrated by the assembly of trisubstituted (Z)-enynes and multifunctional benzenes via iterative cross-coupling reactions or tandem Diels-Alder-aromatization reactions, respectively.