动物尿液中盐酸克伦特罗的分子印迹固相萃取-气相色谱-质谱法研究

采用分子印迹聚合物(MIP)固相萃取小柱提取、净化并富集猪尿液中的盐酸克伦特罗分子,用N,O-双三甲基硅基三氟乙酰胺(BSTFA)衍生化,毛细管气相色谱-质谱联用(选择离子模式,选择离子为277、262、243和86)对衍生物分析。优化了MIP固相萃取柱的淋洗条件,考察了MIP固相萃取柱的净化效果和消除基体干扰能力,建立了对动物尿液中盐酸克伦特罗的定性、定量分析的方法。在优化条件下,本法检出限(LOD)为0.51μg/L,定量限(LOQ)为1.00μg/L;不同盐酸克伦特罗加入量的回收率为71.0%~89.3%;相对标准偏差为3.2%~9.7%。将该方法与农业行业标准方法比较,结果吻合较好。但该方法灵敏度和精密度高,操作更为简单、快捷。     

Molecularly Imprinted Polymer Thin Film Based Surface Plasmon Resonance Sensor to Detect Hemoglobin

Molecularly imprinted polymer（MIP） films for hemoglobin detection were prepared onto the Au/Cr coated surface plasmon resonance（SPR） sensor chips by the in situ electropolymerization of 3-aminophenylboronic acid（3-APBA）.The formation of the films and rebinding processes of hemoglobin were monitored by in situ electrochemical-SPR（EC-SPR） spectroscopy,with allowed real-time observation of the simultaneous changes in electrochemical and optical properties of the films.Scanning electron microscopy（SEM） and atomic force microscopy（AFM）were used to characterize the surface morphologies of the MIP films.The effects of pH,ion strength,different metal ions on rebinding Hb,the specific binding and the selective recognition were investigated.The results obtained with the molecular imprinted SPR chips indicate a good adsorption of Hb in a range of 0.0005-5 mg/mL in 0.05 mol/L sodium phosphate buffer at pH=7.0.A linear calibration curve（R2=0.94） of the SPR sensor for Hb detection was obtained in a range of 0.05-5 mg/mL.The detection limit for hemoglobin by this method was 0.000435 mg/mL（S/N=3）.Interference studies indicate that the MIP films have a good selectivity compared with the referenced proteins.The stability of the sensor was also established.Results indicate that the SPR sensor chip keeps 87.6％ of its original response after 14 d of storage under dry and ambient conditions.     

罗丹明B分子印迹固相萃取小柱的研制及应用

研制一种对罗丹明B具有特异性识别性能的分子印迹固相萃取小柱。用沉淀聚合法制备罗丹明B分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其性能,并对市售辣椒样品中的罗丹明B进行测量。罗丹明B模板聚合物的吸附能力明显优于空白聚合物;印迹固相萃取小柱对罗丹明B标准溶液(0.05 mmol/L)一次性萃取率为98.24%,实际样品测量的回收率为90.0%~95.0%,测定结果的相对标准偏差为0.9%~1.7%(n=3)。罗丹明B分子印迹固相萃取小柱选择性好、萃取率高,可应用于食品、化妆品检测等相关领域。     

Newly Combined Method of Molecularly Imprinted Solid-Phase Extraction with ELISA for Rapid Detection of Clenbuterol in Animal-Tissue Samples

Abstract

A new method using molecularly imprinted polymers (MIPs) as specific adsorbent materials coupled with ELISA analysis is being reported for the first time for the detection of clenbuterol (CLB) residue in the pig muscles. After optimization of the posttreatments, the total amount of template bleeding in the CLB MIPs was decreased to only 3.0 ng CLB/60 mg MIPs, which is 10 times lower than that of the previous report. Moreover, compared to the methods of C18-ELISA and single ELISA, the combined molecularly imprinted solid-phase extraction (MISPE)–ELISA exhibited high precision and robust accuracy for CLB at all three spiked levels of 0.5, 5.0, and 10.0 ng g^?1.     

分子印迹电位型传感器快速检测猪尿液中的克伦特罗

以盐酸克伦特罗为模板分子,采用沉淀聚合法合成了克伦特罗的分子印迹聚合物,并以其为离子载体,制得分子印迹聚合物膜克伦特罗离子选择性电极。在最优实验条件下,电极对克伦特罗阳离子的检出限可达7.0×10-8mol/L,线性范围为1.0×10-7～1.0×10-4mol/L,能斯特斜率为55.7 mV/decade。此电极具有优越的选择性、快速的响应时间以及良好的稳定性;已成功应用于实际猪尿样品中克伦特罗的测定,加标回收率为98%～107%,检测时间小于3 min。     

表面接枝法制备睾酮素分子印迹表面等离子体共振传感器

构建了一种选择性检测睾酮素的分子印迹表面等离子体共振( Surface plasmon resonance, SPR)传感器。采用紫外光引发表面接枝技术,在固定引发转移终止剂的SPR芯片表面制备了以睾酮素为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂的分子印迹膜( Molecularly imprinted film, MIF)。利用SPR在目标共振角处现场监测使MIF聚合成膜过程更易控。偏振调制-红外反射吸收光谱表征证明MIF接枝成功。原子力显微镜结果显示,MIF 表面均匀散布着纳米尺寸的孔穴。利用 SPR 对2.5×10-16~2.5×10-6 mol/L睾酮素进行吸附检测,检出限低至2.5×10-16 mol/L,对低浓度和高浓度的睾酮素吸附分段进行线性拟合,得到拟合线性方程分别为y=19.69+1.21x(R2=0.9913)和y=11.5+0.45x(R2=0.9895);睾酮素类似物雌二醇、雌三醇和黄体酮的吸附实验结果显示,此印迹膜对模板分子有很好的选择性;5次重复洗脱吸附后,MIF仍保持较好的传感性能,说明此传感器具有较高的稳定性和重复利用性;在人工尿液样品中测得的睾酮素回收率为85.2%~92.8%,说明此传感器可以用于实际样品测定。     

扑热息痛分子印迹聚合物应用于固相萃取的研究

以扑热息痛为印迹分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂合成了棒状的印迹聚合物;把其装于自制的固相萃取柱中,研究了以乙腈和水为溶剂时扑热息痛在柱上的保留行为;通过优化清洗、洗脱条件,使扑热息痛和与其具有相似结构的非那西丁、对叔丁基苯酚在柱上得到了很好的分离;同时也测定了治疗感冒的药物海王银得菲中扑热息痛的含量,其回收率可达94．3％．     

Dummy Fragment Template Molecularly Imprinted Polymers for the Selective Solid-phase Extraction of Gonyautoxins from Seawater

A multitemplate molecularly imprinted polymer was synthesized using fragments similar to gonyautoxins 1 and 4 including 2,4,6-triaminopyrimidine, 4-hydroxy-2-butanone, and imidazole as dummy templates by bulk polymerization. Scanning electron microscopy and infrared spectroscopy showed a porous structure and the formation of organic groups in the imprinting process of the polymer. One millilitre of 0.1?mol?L^?1 acetic acid and 1?mL of 95% methanol were the optimized washing and eluting solutions during the molecularly imprinted solid-phase extraction. The adsorption capacity of the multitemplate molecularly imprinted polymer was lower than for the monotemplate molecularly imprinted polymer prepared in a previous study in seawater in which Alexandrium tamarense and Alexandrium minutum were cultivated. This result may due to the inappropriate combination of the dummy template fragments in the synthesis resulting in the unfitness of the imprinting sites for gonyautoxins 1 and 4. In general, it is inappropriate to use fragments with the similar parts to the analyte as the dummy templates. However, this work indicated the optimal molecularly imprinted polymer for the selective extraction of gonyautoxins 1 and 4.     

罗丹明B分子印迹聚合物微球的合成及其在固相萃取中的应用

以罗丹明B为模板分子,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了罗丹明B分子印迹聚合物(MIP)微球,并用扫描电子显微镜表征。 采用紫外分光光度法测定了印迹分子罗丹明B与功能单体丙烯酰胺二者之间的结合常数(K=5.303×103 (mol/L)-1)和化学计量比(n=1)。 考察了沉淀剂的种类和用量对聚合物微球的影响。 将分子印迹聚合物微球应用于固相萃取材料自制固相萃取柱,从加标罗丹明B的红椒粉中萃取罗丹明B。 本文优化了固相萃取条件,高效液相色谱检测表明,在一定的萃取条件下,分子印迹聚合物对加标量为0.479 mg/kg的辣椒中罗丹明B的萃取加标回收率可达91.7％～103.5%。     

羟丙哌嗪分子印迹的固相萃取

以L-羟丙哌嗪为模板分子, α-甲基丙烯酸为功能单体, 三羟甲基丙烷三甲基丙烯酸酯为交联剂, 合成了羟丙哌嗪分子印迹聚合物, 利用该聚合物进行羟丙哌嗪固相萃取应用研究. 实验证明, 所合成的分子印迹聚合物具有良好的识别萃取模板分子羟丙哌嗪的能力, 能够用于羟丙哌嗪的富集浓缩, 而空白聚合物却不具备这样的特性. 考察了模板分子与其结构类似物苄基哌嗪、N-异丙基哌嗪和乙氧基羰基哌嗪的固相萃取分离情况, 研究表明, 虽然其中的苄基哌嗪在印迹材料上具有最强的保留, 但是通过先后使用不同的洗脱溶液实现了模板分子与苄基哌嗪的选择性分离.探讨了印迹识别机理,并用PM3 半经验计算机模拟方法进行了辅助分析验证.     

Synthesis and Solid Phase Extraction Performance Study of NNAL-specific Molecularly Imprinted Polymers Using Dummy Templates

Dummy molecularly imprinted polymers (DMIPs) for 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-(acetymethylamino)-1-(3-pyridyl)-butanol, 4-(methylamino)-1-(3-pyridyl)-1-butanol, and 1-(3-pyridyl)-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec-tron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). Interactionsbetween NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni-trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by4-(acetymethylamino)-1-(3-pyridyl)-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction (DMISPE) was developed for the determination of the analyte using the hit polymer as the sorbing material. Underoptimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.     

Molecularly Imprinted Polymer Film Grafted from Porous Silica for Selective Recognition of Testosterone

Abstract

A type of testosterone‐imprinted polymer film grafted from porous silica was prepared by covalently binding azo‐initiators and then photo‐grafting. Elemental analysis and infrared (IR) spectroscopy attested the polymer formation. The material could be polymerized within 10–60 min with reproducible grafting kinetics, controllable film thickness, and obviously specific recognition ability to testosterone with the imprinting factor of 1.52. Due to its uniform size, spherical shape, controllable film thickness, and accessible sites near or at the surface, this polymer could serve as a sensing element, solid‐phase extraction material, or chromatographic stationary phase to selectively recognize or separate testosterone.     

热聚合制备分子印迹膜的表面等离子体共振现场监测方法

本研究组设计了SPR现场监测MIFs热聚合成膜过程的装置, 并对所制备MIFs的吸附特性进行了检测.     

克百威分子印迹固相萃取微球的制备及性能

以偶氮二异丁腈为引发剂,2~3μm的聚苯乙烯微球为种球,克百威为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀法制备粒径均一的克百威分子印迹聚合物微球(MIPMs)。通过扫描电镜(SEM)、吸附平衡实验和竞争吸附实验分析了克百威MIPMs的形貌及其对克百威的结合特性及吸附选择性,并比较了克百威分子印迹固相萃取柱(MISPE)与C18固相萃取柱(C18SPE)富集水中克百威的效果。结果表明:合成的MIPMs粒径约10μm,表面呈蜂窝状;在90min内可达到饱和吸附,最大吸附量为25.94mg/g;在克百威、灭多威和三羟基克百威共存的条件下,克百威MIPMs可实现对克百威的专一性吸附;与C18SPE相比,克百威MISPE重复使用6次后加标回收率仍在85%以上,可用于水体中痕量克百威的检测。     

Molecularly Imprinted Polymer for Solid‐Phase Extraction of Ecteinascidin 743 from Sea Squirt

Ecteinascidin 743 from sea squirt is one of the most original anti‐tumoral activity compounds, as proven by the Natural Cancer Institute. Ecteinascidin 743 could be obtained with traditional liquid extraction, but it should be purified and separated from the extract. A molecularly imprinted solid‐phase extraction procedure was developed for the selective separation. Ecteinascidin 743 was used as the template and the polymer was synthesized in a methanol environment. Water and n‐hexane as the washing solvents can eliminate most of the interference. Good linearity and low relative standard deviations (less than 4.39%) justify its continuing development.     

对硝基苯酚分子印迹聚合物最佳功能单体的筛选及其水样固相萃取中的应用

以对硝基苯酚(4-NP)为对象,采用非印迹聚合物(NIP)库筛选法选出乙烯基咪唑为最佳功能单体,通过实验选出乙腈为最合适的聚合溶剂、三甲氧基丙基三甲基丙烯酸酯(TRIM)为交联剂制备分子印迹聚合物。对固相萃取进行了优化,用pH=2.5的磷酸盐缓冲溶液上样、体积比为45∶55的乙腈和磷酸盐缓冲溶液淋洗、甲醇洗脱条件下,聚合物具有最佳印迹效果。4-NP分子印迹聚合物的表观吸附量达到5.8 mg/g。该印迹聚合物对4-NP及其结构类似物苯酚和对氯苯酚的萃取回收率分别为96.0%、78.8%和77.8%,表明具有较高的选择性,还成功地用于自来水样品中4-NP的固相萃取,回收率达到93.1%。由此可得该方法快速、有效,可用于分子印迹聚合物优化制备。     

Determination of Chloramphenicol Residues in Foods by ELISA and LC-MS/MS Coupled with Molecularly Imprinted Solid Phase Extraction

The combination of molecularly imprinted solid-phase extraction (MISPE) with ELISA and LC-MS/MS was developed for the detection of chloramphenicol (CAP) in honey samples. Significant recoveries of 99.1 ± 7.1 and 98.8 ± 8.2% were obtained for intra- and inter-assay determination by ELISA determination, respectively. The limit of detection of CAP was 0.034 μg kg^?1 and the limit of quantification was 0.046 μg kg^?1. Determination and validation of CAP by using LC-MS/MS were performed following the same extraction and purification process as for the ELISA. The results demonstrated that the CAP samples purified by using MISPE were simultaneously applicable to analysis by ELISA and LC-MS/MS.     

分子印迹固相萃取/高效液相色谱法测定猪肝中盐酸克伦特罗的方法研究

建立了分子印迹固相萃取/高效液相色谱法测定猪肝中盐酸克伦特罗残留量的方法。以ASB C18色谱柱(250 mm×4.60 mm,5μm)分离,流动相为甲醇-水(45∶55,p H 3.0),紫外检测波长243 nm,进样量10μL,流速0.6 m L/min,柱温30℃。分子印迹固相萃取条件为:上样溶剂为双蒸水,上样流速为0.6 m L/min;洗脱剂为1%三氟乙酸的甲醇溶液。上述优化条件下,该方法在0.432~4.32μg/m L范围内线性关系良好,相关系数(r)为0.999 0。加标回收率为84.7%~92.0%,相对标准偏差(RSD)为1.5%~1.8%。方法的准确度和精密度满足残留分析的要求。     

一种高选择性固相萃取吸附剂--分子印迹聚合物

固相萃取是对样品富集、分离的一种有效方法,因而得到广泛应用.分子印迹是近些年发展起来的新技术,由于分子印迹聚合物具有高的选择性,被应用于环境、药物、生物、食品等样品的分析.本文介绍了固相萃取和分子印迹技术的原理以及两者结合用于固相萃取的过程,对近10年来国内外分子印迹聚合物应用于固相萃取的研究工作进行了总结和评述,并对其将来的发展进行了展望.     

间接抑制免疫分析法测定水溶液中痕量磺胺甲噁唑

将分子印迹技术与表面等离子体共振技术联用,建立了一种新型间接抑制免疫分析法,并用于磺胺甲唑的测定.采用管内原位聚合的方法,在长30 cm,内径0.25 mm的毛细管内制备了磺胺甲唑印迹聚合物涂层.涂层厚度由扫描电子显微镜测得为198 nm.在BIAcore 3000生物传感器上自动进行检测.涂层毛细管用于免疫检测前的在线固相萃取和预富集.磺胺甲唑单克隆抗体被富集的磺胺甲唑抑制,抑制信号与磺胺甲唑的浓度成正比.在优化的实验条件下,方法的线性范围为0.04～10.0 μg/L; 检出限为0.01 μg/L.本方法可直接用于实际样品的检测,回收率好,灵敏度高,操作简便,自动化程度高.