The regulation mechanism of organic additives on the crystallization of inorganic crystal is fundamentally important in biomineralization. Experimentally, it was found that the amino acids glycine (Gly) and glutamic acid (Glu) could lead to the formation of rod- and plate-like hydroxyapatite (HAP) crystallites, respectively. The detailed adsorption behavior of Gly and Glu on HAP crystal faces was studied by molecular dynamics (MD) simulation. The specific adsorption sites and patterns of Gly and Glu on the (100) and (001) faces of HAP crystals were revealed at the atomic level. The amino acids adsorbed on the HAP (001) and (100) faces with their positive amino groups occupied vacant calcium sites, and their negative carboxylate groups occupied vacant P or OH sites precisely and formed an ordered adsorption layer. The atomic force microscopy pulling simulation and free energy calculation showed that Glu was much more difficult to depart from the HAP (001) face than that from the (100) face. This result indicated that Glu preferred to adsorb strongly onto the HAP (001) face, which resulted in the formation of plate-like HAP. However, Gly did not show any significantly preferential adsorption between these two HAP faces. Thus, the habits of HAP, rod-like crystallites, were not altered during the HAP crystallization in the presence of Gly. Combined with experimental results, our study demonstrated that the MD simulation of interfacial structures could improve our understanding of biological regulation in mineralization processes at the atomic level. 相似文献
The water behavior on (001) and (100) crystal faces of hydroxyapatite (HAP) were studied using molecular dynamics (MD) simulations.
The study showed that the water molecules between the HAP faces were under conditions of strong electrical field and high
pressure, and hence formed 2–3 well-organized water layers on the crystal surfaces. These structured water layers had ice-like
features. Compared with the crystallographic [100] direction of HAP, the polarity along the [001] direction was stronger,
which resulted in more structured water layers on the surface. The interaction of water molecules with the calcium and phosphate
sites at the HAP-water interface was also studied. The results indicated the multiple pathways of water adsorption onto the
HAP surfaces. This study revealed the formation and the detailed structure of water layers on HAP surfaces and suggested that
the interfacial water played an important role in stabilizing the HAP particles in aqueous solutions.
Translated from Chinese Journal of Inorganic Chemistry, 2006, 22(8): 1392–1400 (in Chinese) 相似文献
The chemistry of phosphoserine [Ser(P)] containing peptides and polypeptides was extensively investigated to explore a new biomineralization material science. The selective cleavage of the O,O′‐diphenyl phospho‐protecting groups of Ser(PO3Ph2) was examined using hydrogenolysis catalysts. Among the catalysts examined, only PtO2 in 50% trifluoroacetic acid (TFA)/AcOH successfully cleaved the protecting group of Ser(PO3Ph2) to give Ser(P). Based on these characteristic new findings, Ser(P)‐containing dipeptides such as Gly‐Ser(P), Ala‐Ser(P), Ser‐Ser(P), Asp‐Ser(P), Glu‐Ser(P), and Lys‐Ser(P), and tetrapeptide [Asp‐Ser(P)]2 were synthesized by a facile method. When we used the Ser(PO3Ph2) residues at the C terminals, the amino functional groups of amino acids and peptides can be coupled by the unsymmetric mixed anhydride using isobutyl chloroformate but cannot be by the symmetric anhydride method using dicyclohexylcarbodiimide. Neither unsymmetric mixed anhydride nor symmetric anhydride can be coupled with p‐nitrophenol at their C terminals. High‐molecular‐weight sequential polypeptides containing Ser(P) such as poly[Ser(P)‐Xaa] (Xaa: Gly, Ala, Ser, Lys, Asp, Glu) and poly[Gly‐Ser(P)‐Gly] were first synthesized by the polycondensation of the di‐ and tripeptide p‐nitrophenyl active esters, followed by the quantitative elimination of the diphenyl protecting groups by PtO2 in TFA/AcOH. The new strategy to synthesize Ser(P)‐containing peptides and model proteins may help the development of hybrid formulations of marine and biomimetic protein minerals.
An approach to organic-inorganic interfacial structure at the atomic level is a great challenge in the studies of biomineralization. We demonstrate that atomic force microscopy (AFM) is powerful tool to discover the biomineral interface in detail. By using a model system of (100) hydroxyapatite (HAP) face and citrate, it reveals experimentally that only a side carboxylate and a surface calcium ion are involved in the binding effect during the citrate adsorption, which is against the previous understandings by using Langmuir adsorption and computer simulation. Furthermore, the adsorbed citrate molecules can use their free carboxylate and hydroxyl groups to be self-assembled on the HAP surface. AFM examination also finds that the presence of citrate molecules on the HAP crystal faces can enhance the adhesion force of the HAP surface. We suggest that the established AFM method can be used for a precise and direct understanding of biointerfaces at the atomic level. 相似文献
Mineral-associated proteins have been proposed to regulate many aspects of biomineralization, including the location, type, orientation, shape, and texture of crystals. To understand how proteins achieve this exquisite level of control, we are studying the interaction between the phosphoprotein osteopontin (OPN) and the biomineral calcium oxalate monohydrate (COM). In the present study, we have synthesized peptides corresponding to amino acids 220-235 of rat bone OPN (pSHEpSTEQSDAIDpSAEK), one of several highly phosphorylated, aspartic-, and glutamic acid-rich sequences found in the protein. To investigate the role of phosphorylation in interaction with crystals, peptides containing no (P0), one (P1), or all three (P3) phosphates were prepared. Using a novel combination of confocal microscopy and scanning electron microscopy, we show that these peptides adsorb preferentially to {100} faces of COM and inhibit growth of these faces in a phosphorylation-dependent manner. To characterize the mechanism of adsorption of OPN peptides to COM, we have performed the first atomic-scale molecular-dynamics simulation of a protein-crystal interaction. P3 adsorbs to the {100} face much more rapidly than P1, which in turn adsorbs more rapidly than P0. In all cases, aspartic and glutamic acid, not phosphoserine, are the amino acids in closest contact with the crystal surface. These studies have identified a COM face-specific adsorption motif in OPN and delineated separate roles for carboxylate and phosphate groups in inhibition of crystal growth by mineral-associated phosphoproteins. We propose that the formation of close-range, stable, and face-specific interactions is a key factor in the ability of phosphoproteins to regulate biomineralization processes. 相似文献
Defect sites on bone minerals play a critical role in bone remodeling processes. We investigated single crystal hydroxyapatite (100) surfaces bearing crystal defects under acidic dissolution conditions using real-time in situ atomic force microscopy. At defect sites, surface structure-dependent asymmetric hexagonal etch pits were formed, which dominated the overall dissolution rate. Meanwhile, dissolution from the flat terraces proceeded by stochastic formation of flat bottom etch pits. The resulting pit shapes were intrinsically dictated by the HAP crystal structure. Computational modeling also predicted different step energies associated with different facets of the asymmetric etch pits. Our microscopic observations of HAP dissolution are significant for understanding the effects of local surface structure on the bone mineral remodeling process and provide useful insights for the design of novel therapies for treating osteoporosis and dental caries. 相似文献
It is interesting to note that the demineralization of natural enamel does not happen as readily as that of the synthesized hydroxyapatite (HAP), although they share a similar chemical composition. We suggest that the hierarchical structure of enamel is an important factor in the preservation of the natural material against dissolution. The anisotropic demineralization of HAP is revealed experimentally, and this phenomenon is understood by the different interfacial structures of HAP-water at the atomic level. It is found that HAP {001} facets can be more resistant against dissolution than {100} under acidic conditions. Although {100} is the largest surface of the typical HAP crystal, it is {001}, the smallest habit face, that is chosen by the living organisms to build the outer surface of enamel by an oriented assembly of the rodlike crystals. We reveal that such a biological construction can confer on enamel protections against erosion, since {001} is relatively dissolution-insensitive. Thus, the spontaneous dissolution of enamel surface can be retarded in biological milieu by such a smart construction. The current study demonstrates the importance of hierarchical structures in the functional biomaterials. 相似文献
Polyaspartic acid (PAA) and phosphophoryn (PPn) have been suggested to adsorb specifically on the (100) and (010) faces, respectively, of octacalcium phosphate (Ca4H(PO4)3 · 2.5H2O, OCP). In this study, the extent of adsorption and influence of these molecules on OCP crystal growth has been investigated. For kinetic studies, protein effects on crystal growth were examined in solutions sustained at a constant level of supersaturation at pH 6.00 and ionic strength of 0.08 mol l−1. The maximum adsorbed mol surface concentration for PPn was 100-fold less than that for PAA. Inhibitory effects interpreted in terms of mol surface coverage showed PPn to retard OCP growth more effectively than PAA. However, when considering percentage of crystal face covered by protein, PAA and PPn showed similar maximum adsorption concentrations onto the (100) and (010) crystal faces, respectively. PAA inhibited OCP growth by 20% when only 1% of the (100) face (1% total crystal area) was covered. PPn had to reach over 200% (010) face coverage (or 28% total crystal area) before a similar level of crystal growth inhibition was obtained. This difference in inhibitory effect may be the result of a more effective β-strand conformation of the shorter PAA molecule or may indicate that growth at the (100) face is rate controlling and, therefore, less than 1% coverage of this face is needed before a significant decrease in rate is observed. 相似文献
Hydrogels have been thought to be the material which can provide appealing replacements of biological organisms. Pores of hydrogels synthesized from lyotropic liquid crystalline (LLC) templates were smaller in size and more uniform than those of traditional hydrogels. LLC poly‐acrylamide (PAAm) hydrogels were used as the growth media of CaCO3. After copolymerized with acrylic acid and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS), LLC hydrogels were modified with COOH and SO3H, respectively. The effect of functional groups on the biomimetic mineralization of CaCO3 was studied. Most of crystals from traditional hydrogels are rhombohedral and could not form aggregates. Only a few could aggregate and have a particular morphology with irregular orientation of subcrystal. Compared with crystals separated from traditional hydrogels, crystals growing in the LLC hydrogels were much more regulated and could form aggregates with particular morphology and regular orientation, that is, face (104) of rhombohedral subcrystals parallel to the surface of the macrocrystals. Modification of COOH and SO3H groups made CaCO3 subcrystal align more tightly. COOH had minor influences on the crystal orientation and small modification to the aggregate morphology. SO3H groups could change the crystal orientation and morphology effectively. The aggregates are pseudo‐spherical and the face perpendicularity to the face (104) parallels to the surface of the aggregates. 相似文献
The crystal structures of pseudophomins A and B, with primary structures β‐hydroxydecanoyl–l ‐Leu–d ‐Glu–d ‐allo‐Thr–d ‐Ile–d ‐Leu–d ‐Ser–l ‐Leu–d ‐Ser–l ‐Ile monohydrate, C55H97N9O16·H2O, and β‐hydroxydodecanoyl–l ‐Leu–d ‐Glu–d ‐allo‐Thr–d ‐Ile–d ‐Leu–d ‐Ser–l ‐Leu–d ‐Ser–l ‐Ile monohydrate, C57H101N9O16·H2O, new cyclic lipodepsipeptides isolated from Pseudomonas fluorescens strain BRG100, have been solved. The absolute configuration of pseudophomin A has been determined from anomalous dispersion and the stereochemistry of the β‐hydroxy acid group is R. 相似文献
The biological mediation of mineral formation (biomineralization) is realized through diverse organic macromolecules that guide this process in a spatial and temporal manner. Although the role of these molecules in biomineralization is being gradually revealed, the molecular basis of their regulatory function is still poorly understood. In this study, the incorporation and distribution of the model intrinsically disordered starmaker-like (Stm-l) protein, which is active in fish otoliths biomineralization, within calcium carbonate crystals, is revealed. Stm-l promotes crystal nucleation and anisotropic tailoring of crystal morphology. Intracrystalline incorporation of Stm-l protein unexpectedly results in shrinkage (and not expansion, as commonly described in biomineral and bioinspired crystals) of the crystal lattice volume, which is described herein, for the first time, for bioinspired mineralization. A ring pattern was observed in crystals grown for 48 h; this was composed of a protein-enriched region flanked by protein-depleted regions. It can be explained as a result of the Ostwald-like ripening process and intrinsic properties of Stm-l, and bears some analogy to the daily growth layers of the otolith. 相似文献
The electrochemical piezoelectric quartz crystal impedance (EQCI), a combined technique of piezoelectric quartz crystal impedance (PQCI), electrochemical impedance (EI), and Fourier transform infrared spectroscopy-attenuated total internal reflectance spectroscopy (FTIR-ATR) were used to in situ study the adsorption process of fibrinogen onto the surface of biomaterials—TiO2 and hydroxyapatite (Ca5(PO4)3OH, HAP). The equivalent circuit parameters, the resonance frequencies and the half peak width of the conductance spectrum of the two biomaterial-modified piezoelectric quartz crystal (PQC) resonances as well as the FTIR-ATR spectra of fibrinogen during fibrinogen adsorption on TiO2 and HAP particles modified electrode surface were obtained. The adsorption kinetics and mechanism of fibrinogen were investigated and discussed as well. The results suggested that two consecutive steps occurred during the adsorption of fibrinogen onto TiO2 and hydroxyapatite (HAP) surface. The fibrinogen molecules were firstly adsorbed onto the surface, and then the rearrangement of adsorbed fibrinogen or multi-layered adsorption occurred. The FTIR-ATR spectroscopy investigations showed that the secondary structure of fibrinogen molecules was altered during the adsorption and the adsorption kinetics of fibrinogen related with the variety of biomaterials. These experimental results suggest a way for enriching biological analytical science and developing new applications of analytical techniques, such as PQCI, EI, and FTIR-ATR. 相似文献
For biomineralization processes, the interaction of the surface of calcite crystals with organic molecules is of particular importance. Especially, biologically controlled biomineralization as in exoskeletons of mollusks and echinoderms, e.g., sea urchin with single-crystal-like spines and shells,1-3 requires molecular control of seed formation and growth process. So far, experiments showing the obvious influence of organic molecules on the morphology and habit of calcite crystals have demonstrated the molecular dimension of the interaction.4-7 Details of the kinetics of growth and dissolution of mineral surfaces influenced by additives are available,8,9 but other experimental data about the structure of the organic/inorganic interface on the atomic scale are rare. On the other hand, complicated organic macromolecules which are involved in biomineralization are numerous, with only a small fraction solved in structure and function so far.10-13 Therefore, model systems have to be designed to provide a basic understanding for the interaction process.14 Using grazing incidence X-ray diffraction combined with molecular modeling techniques, we show that glycine molecules order periodically on the calcite (104) face in competition with the solvent water when exposed to an aqueous solution of the most simple amino acid. In contrast to the general concept of the charge-matching fit of organic molecules on mineral surfaces,4,14 glycine is not attached to the calcite surface directly but substitutes for water molecules in the second hydration layer. 相似文献
研究生物矿化过程及生物矿物的形成机制具有重要的科学意义,这方面的研究不仅有助于我们认识自然,而且还可以指导体外仿生合成具有分级结构的功能性复合材料.原子力显微镜(atomic force microscope,AFM)是微米、纳米尺度上实时观测矿物成核或生长的强有力工具.本文综述了原子力显微镜法研究方解石(104)面生... 相似文献
A key feature of biomineralization processes is that they take place within confined volumes, in which the local environment can have significant effects on mineral formation. Herein, we investigate the influence of confinement on the formation mechanism and structure of calcium phosphate (CaP). This is of particular relevance to the formation of dentine and bone, structures of which are based on highly mineralized collagen fibrils. CaP was precipitated within 25–300 nm diameter, cylindrical pores of track etched and anodised alumina membranes under physiological conditions, in which this system enables systematic study of the effects of the pore size in the absence of a structural match between the matrix and the growing crystals. Our results show that the main products were polycrystalline hydroxapatite (HAP) rods, together with some single crystal octacalcium phosphate (OCP) rods. Notably, we demonstrate that these were generated though an intermediate amorphous calcium phosphate (ACP) phase, and that ACP is significantly stabilised in confinement. This effect may have significance to the mineralization of bone, which can occur through a transient ACP phase. We also show that orientation of the HAP comparable, or even superior to that seen in bone can be achieved through confinement effects alone. Although this simple experimental system cannot be considered, a direct mimic of the in vivo formation of ultrathin HAP platelets within collagen fibrils, our results show that the effects of physical confinement should not be neglected when considering the mechanisms of formation of structures, such as bones and teeth. 相似文献
Ultralong hydroxyapatite (HAP) nanowires are promising for various biomedical applications owing to their chemical similarity to the inorganic constituent of bone, high biocompatibility, good flexibility, excellent mechanical properties, etc. However, it is still challenging to control the formation of ultralong HAP nanowires because of the presence of free PO43− ions in the reaction system containing the inorganic phosphate source. In addition, it takes a long period of time (usually tens of hours) for the synthetic process of ultralong HAP nanowires. Herein, for the first time, we have developed an eco-friendly calcium oleate precursor microwave hydrothermal method using biocompatible adenosine 5′-triphosphate (ATP) as a bio-phosphorus source and water as the only solvent for the rapid synthesis of ultralong HAP nanowires. The controllable hydrolysis of ATP can avoid the premature formation of calcium phosphate nuclei and uncontrollable crystal growth. Microwave heating can significantly shorten the synthetic time from tens of hours required by the traditional heating to 1 h, thus achieving high efficiency, energy saving and low cost. The as-prepared ultralong HAP nanowires with high flexibility have lengths of several hundred micrometers and diameters of 10~20 nm, and they usually self-assemble into nanowire bundles along their longitudinal direction. The as-prepared ultralong HAP nanowire/chitosan porous scaffold has excellent bioactivity, good biodegradation and cytocompatibility owing to the bioactive adenosine adsorbed on the surface of ultralong HAP nanowires. It is expected that ultralong HAP nanowires will be promising for various applications in the biomedical fields, such as bone defect repair, skin wound healing, and as a drug nanocarrier. 相似文献