Potentiometric Membrane Electrode for Cr(III) Ion Based on a New Aryl Amide Bifunctional Bridging Ligand as a Neutral Carrier

A novel Cr(III) ion‐selective electrode is constructed by incorporating a new aryl amide bifunctional bridging ligand, 2,2′‐bis{[(2″‐benzylaminoformyl)phenxoyl]methyl}‐diethylether (BBPMD) as a neutral carrier into the PVC matrix. The proposed electrode, with optimum membrane composition, exhibits an excellent near‐Nernstian response for Cr³⁺ ion ranging from 2.8 × 10^?6 to 1.0 × 10^?1 mol/L with a detection limit of 8.6 × 10^?7 mol/L and a slope of 19.5 ± 0.2 mV/dec in pH 3.0 nitrate buffer solution at 25 °C. It has an appropriate response time, suitable reproducibility, and good selectivity towards Cr³⁺ ion. The operational pH range of the proposed electrode is 2.5–6.5. The response mechanism was discussed in view of UV‐vis spectroscopy and the A. C. impedance technique. The excellent analytical features of the proposed electrode could lead to its successful application as an indicator electrode in potentiometric titration of Cr³⁺ ion and in the direct determination of Cr³⁺ ion in tea leaves and coffee samples.     

Aluminum(III)‐selective PVC Membrane Electrode Based on Salicylaldehyde Salicyloyl Hydrazone

A highly selective PVC membrane electrode for Al³⁺ based on salicylaldehyde salicyloyl hydrazone as a neutral carrier has been prepared and studied. The sensor exhibits a good response for Al³⁺ over a linear range of 9.0 × 10^‐6 to 1.0 × 10^‐1 mol/L, with a Nernstian slope of 20.0 ± 0.2 mV/decade and detection limit of 7.0 × 10^‐6 mol/L. Selectivity coefficients determined by the method of separate solution indicate high selectivity for Al³⁺. The response mechanism was discussed in view of UV‐Vis spectroscopy technique and the A.C. impedance technique. It was used as an indicator electrode in potentiometric titration of Al3+ with EDTA and in the determination of Al³⁺ in real samples. The electrode has a relatively fast response time, long life time and satisfactory stability.     

Mercury‐modified Lignosulfonate‐stabilized Gold Nanoparticles as an Alternative Material for Anodic Stripping Voltammetry of Thallium

Lignosulfonate‐stabilized gold nanoparticles (AuNPs‐LS) were synthesized and subsequently used as a complexing agent for mercury ions. The obtained AuNPs‐LS/Hg²⁺ complex was characterized by means of various physicochemical techniques such as UV‐vis spectroscopy, transmission electron microscopy and cyclic voltammetry. Furthermore, the resulting complex was evaluated as an electrode modifier for the development of amperometric sensors. Upon sufficient negative potential, the bound mercury ions are reduced to form an amalgam with AuNPs‐LS. Thus, the performance of glassy carbon electrode (GCE) modified by AuNPs‐LS/Hg film was investigated as an electrochemical sensor in the determination of Tl⁺ ions in a 0.05 M EDTA at pH 4.5. The presence of the mercury containing film improves the analyte accumulation due to its ability to form a fused amalgam with thallium. The presented data indicate that the GCE/AuNPs‐LS/Hg modified electrode shows better performance toward Tl⁺ determination in comparison to bare GCE. The stripping anodic peak current of thallium was linear over its concentration range from 1.7⋅10⁻⁷ to 5.0⋅10⁻⁶ M. The detection limit (3σ) was estimated to be 1.4⋅10⁻⁷ M. The proposed method was successfully applied for the determination of thallium ions in real samples of soil derived from the area of the copper smelter near Głogów (Poland).     

A Self‐assembled L‐Cysteine and Electrodeposited Gold Nanoparticles‐reduced Graphene Oxide Modified Electrode for Adsorptive Stripping Determination of Copper

Glassy carbon electrode (GCE) modified with L‐cysteine and gold nanoparticles‐reduced graphene oxide (AuNPs‐RGO) composite was fabricated as a novel electrochemical sensor for the determination of Cu²⁺. The AuNPs‐RGO composite was formed on GCE surface by electrodeposition. The L‐cysteine was decorated on AuNPs by self‐assembly. Physicochemical and electrochemical properties of L‐cysteine/AuNPs‐RGO/GCE were characterized by scanning electron microscopy, atomic force microscopy, energy dispersive spectroscopy, Raman spectroscopy, X‐ray diffraction, cyclic voltammetry and adsorptive stripping voltammetry. The results validated that the prepared electrode had many attractive features, such as large electroactive area, good electrical conductivity and high sensitivity. Experimental conditions, including electrodeposition cycle, self‐assembly time, electrolyte pH and preconcentration time were studied and optimized. Stripping signals obtained from L‐cysteine/AuNPs‐RGO/GCE exhibited good linear relationship with Cu²⁺ concentrations in the range from 2 to 60 μg L⁻¹, with a detection limit of 0.037 μg L⁻¹. Finally, the prepared electrode was applied for the determination of Cu²⁺ in soil samples, and the results were in agreement with those obtained by inductively coupled plasma mass spectrometry.     

Catalytic Adsorptive Stripping Voltammetry of Germanium(IV) in the Presence of Gallic Acid and Vanadium(IV)‐EDTA

A highly sensitive and selective catalytic adsorptive cathodic striping procedure for the determination of trace germanium is presented. The method is based on adsorptive accumulation of the Ge(IV)‐gallic acid (GA) complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species. The reduction current is enhanced catalytically by addition of vanadium(IV)‐EDTA. The optimal experimental conditions include the use of 0.03 mol/L HClO₄ (pH1.6), 6.0×10^?3 mol/L GA, 3.0×10^?3 mol/L V(IV), 4.0×10^?3 mol/L EDTA, an accumulation potential of ?0.10 V(vs. Ag/AgCl), an accumulation time of 120 s and a differential pulse potential scan mode. The peak current is proportional to the concentration of Ge(IV) over the range of 3.0×10^?11 to 1.0×10^?8 mol/L and the detection limit is 2×10^?11 mol/L for a 120 s adsorption time. The relative standard deviation at 5.0×10^?10 mol/L level is 3.1%. No serious interferences were found. The method was applied to the determination of germanium in ore, mineral water and vegetable samples with satisfactory results.     

A Sensitive Fluorescence Quenching Method for the Determination of Iron( Ⅱ） with 1,10-Phenanthroline

A sensitive and selective fluorescence quenching method for the determination of Fe²⁺ with 1,10‐phenanthroline was developed. The fluorescence intensity of 1,10‐phenanthroline at λ_ex of 266 run and λ_em of 365 nm was constant in the range of pH 4.0 to 10.0 and decreased linearly upon addition of Fe²⁺ to its solution. This decrease was mainly due to a static quenching effect caused by the formation of a non‐fluorescent complex of Fe²⁺ with 1, 10‐phenanthroline. The total amount of iron was determined by using hydroxylamine hydrochloride to reduce Fe³⁺ to Fe²⁺. The linear range was from 5.0 × 10–⁷ to 2.0 × 10–⁵ mol/L with a detection limit of 2.4 × 10–⁸ mol/L at 3s?. The quenching constant of Fe²⁺ to 1,10‐phenanthroline was calculated to be (5.70 × 0.05) × 10⁴ L/mol at 25 °C. Effects of foreign ions on the determination of Fe²⁺ were investigated. The results of the new method for the determination of iron in tap water and natural water samples were in good agreement with those obtained by graphite atomic absorption spectrometry.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

A Metal‐Free Approach Based on Graphene Oxide‐Modified Electrode for Monitoring the Photoelectrocatalytic Degradation of EDTA

A novel voltammetric method for the sensitive determination of ethylenediaminetetraacetic acid (EDTA) was developed based on a graphene oxide (GO) modified electrode. In acetate buffer solution, GO showed a voltammetric response composed of a sharp anodic peak and a weak cathodic peak. When EDTA was present in the solution, the voltammetric response of GO was suppressed. Under optimum conditions, the response of the GO‐modified electrode was inversely proportional to the concentration of EDTA from 6.0×10^?7 to 1.0×10^?4 mol/L. Using such a GO‐based voltammetry, the effective photoelectrocatalytic degradation of EDTA over a TiO₂ film electrode was evaluated and some influencing factors were investigated.     

Adsorptive Voltammetric Measurement of Trace Level of Iron(III) with 4–(2–Pyridylazo) Resorcin

Abstract

The polarographic behavior of the complex of iron–4– (2–pyridylazo) resorcin(PAR) was studied. In HAc– NaAc– EDTA buffer solution, the complex can be adsorped on a hanging mercury drop electrode giving a sensitive adsorptive complex reduction peak with a peak potential at -0.36V(vs. SCE). Optimum experimental conditions were found by the use of 0.08mol/L HAc, 0.06mol/L NaAc, 5.0 × 10^?3mol/L EDTA and 1.0 × 10^?5mol/L PAR. With preconcentration for 60s, the derivative peak height of the complex compound is linearly proportional to the concentration for Fe in the range from 1.0 × 10^?9mol/L to 1.0 × 10^?7mol/L. For a 2–min pre–concentration time, the detection limit found was 2.0 × 10^?10mol/L. This method has high sensitivity and selectivity. It has been applied to the determination of trace iron in food and water samples without any pre–separation step.     

Rare earth complexes chemiluminescence catalyzed by gold nanoparticles for fast sensing of Tb3+ and Eu3+

Developing multiplex sensing technique is of great significance for fast sample analysis. However, the broad emissions of most chemiluminescence(CL) luminophores make the multiplex CL analysis be difficult. In this work, a simple and sensitive CL analytical method has been developed for the simultaneous determination of Tb³⁺and Eu³⁺thanking to their narrow band emission. The technique was based on a mixed CL system of periodate(IO₄^-)-hydrogen peroxide(...     

Studies on Synthesis of a Cycloheptapeptide and Effects of Different Metal Ions on the Cyclization

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｉｃｐｅｐｔｉｄｅｓ ,ｗｈｉｃｈａｒｅｃｏｎｓｔｒａｉｎｅｄｃｏｎｆｏｒｍａ ｔｉｏｎａｌｌｙａｎｄｍｏｒｅｒｅｓｉｓｔａｎｔｔｏｐｒｏｔｅａｓｅｄｉｇｅｓｔｉｏｎｓｔｈａｎｔｈｅｉｒｌｉｎｅａｒｐｒｅｃｕｒｓｏｒｓ ,ｈａｖｅｂｅｅｎｏｆｇｒｅａｔｉｎｔｅｒｅｓｔａｓｓｙｎｔｈｅｔｉｃｔａｒｇｅｔｓｂｏｔｈａｓｐｏｔｅｎｔｉａｌｄｒｕｇｌｅａｄｓａｎｄａｓｍｏｄｅｌｓｆｏｒｃｏｎ ｆｏｒｍａｔｉｏｎａｌａｎａｌｙｓｉｓ .1 4 Ｃｕｒｒｅｎｔｍｅｔｈｏｄｓｆｏｒｓｙｎｔ…     

Ratiometric Fluorescent Chemosensor for Selective Detection Cr3+ based on Carbazole and Benzimidazole

A novel Cr³⁺‐selective ratiometric fluorescent chemosensor 1‐substitued‐2‐carbazoleylbenzoimidazole ( L ) based on benzimidazole and carbazole was synthesized and characterized by nuclear magnetic resonance (¹H/¹³C NMR), Fourier transform infrared spectrometry (FTIR), and mass spectroscopy. L could selectively detect Cr³⁺ over other metal ions by UV–vis absorption and fluorescence emission spectroscopic methods in CH₃CN. L showed ratiometric fluorescent recognition of Cr³⁺; the fluorescent responses could be observed by naked eye under a UV lamp. The binding stoichiometry ratio of the L –Cr³⁺ complex was found to be 1:1 according to Job’s plot and MALDI‐TOF MS analysis. The results of DFT calculation supported this conclusion.     

Determination of Genistein by Flow‐injection Chemiluminescence Method Based on Ferricyanide Oxidation Sensitized by Rhodamine 6G

A novel flow injection chemiluminescence (FI‐CL) method for the determination of genistein was described. The method was based on the reaction between genistein and potassium ferricyanide in alkaline solution to give weak CL signal, which was dramatically enhanced by rhodamine 6G (Rh G). The CL emission allowed quantitation of genistein concentration in the range 1.0 × 10^?7–4.0 × 10^?5 mol/L with a detection limit (3σ) of 4.2 × 10^?8 mol/L. The relative standard deviation for 11 parallel measurements of 5.0 × 10^?7 mol/L, 4.0 × 10^?6 mol/L and 1.0 × 10^?5 mol/L genistein were 2.59%, 2.40% and 1.48%, respectively. The experimental conditions for the CL reaction were optimized and the possible reaction mechanism was discussed. The method was applied to the determination of genistein in biological fluids.     

Chemiluminescent Logic Gates Based on Functionalized Gold Nanoparticles/Graphene Oxide Nanocomposites

Label‐free logic gates (AND, OR, and INHIBIT) based on chemiluminescence (CL) as new optical readout signal have been developed by taking advantage of the unique CL activity of luminol‐ and lucigenin‐functionalized gold nanoparticles/graphene oxide (luminol‐lucigenin/AuNPs/GO) nanocomposites. It was found that Fe²⁺ ions could induce the CL emission of luminol‐lucigenin/AuNPs/GO nanocomposites in alkaline solution. On this basis, by using Fe²⁺ ions and NaOH as the inputs and the CL signal as the output, an AND logic gate was fabricated. When the initial reaction system contained luminol‐lucigenin/AuNPs/GO nanocomposites and NaOH, either Fe²⁺ ions or Ag⁺ ions could react with the luminol‐lucigenin/AuNPs/GO nanocomposites to produce a strong CL emission. This result was used to design an OR logic gate using Fe²⁺ ions and Ag⁺ ions as the inputs and CL signal as the output. Moreover, two INHIBIT logic gates for Fe²⁺ and Ag⁺ were also developed using by NaClO and L ‐cysteine as their CL inhibitors, respectively. Furthermore, the proposed logic gates were successfully used to detect Fe²⁺, Ag⁺, and L ‐cysteine, respectively. The developed logic gates may find future applications in sensing, clinical diagnostics, and environmental monitoring.     

Transport of Tb3+in Dispersion Supported Liquid Membrane System with Carrier P507

The Tb³⁺ transport in dispersion supported liquid membrane (DSLM) consisting of polyvinylidene fluoride membrane (PVDF) as the liquid membrane support and dispersion solution including HCl solution as the stripping solution and 2‐ethyl hexyl phosphonic acid‐mono‐2‐ethyl hexyl ester (P507) dissolved in kerosene as the membrane solution, has been studied. The effects of pH value, initial concentration of Tb³⁺ and different ionic strength in the feed phase, volume ratio of membrane solution and stripping solution, concentration of HCl solution, concentration of carrier, different stripping agents in the dispersion phase on transport of Tb³⁺ has also been investigated, respectively. As a result, the optimum transport conditon of Tb³⁺ was that concentration of HCl solution was 4.0 mol/L, concentration of P507 was 0.10 mol/L, and volume ratio of membrane solution and stripping solution was 1.0 in the dispersion phase, and pH value was 5.2 in the feed phase. Ionic strength had no obvious effect on transport of Tb³⁺. Under the optimum condition studied, when initial concentration of Tb³⁺ was 1.0×10^?4 mol/L, the transport rate of Tb³⁺ was up to 95.2% during the transport time of 95 min. The kinetic equation was developed in terms of the law of mass diffusion and the theory of interface chemistry. The results were in good agreement with the literature data.     

Upconversion nanoparticle-based fluorescence resonance energy transfer assay for Cr(III) ions in urine

A novel assay of chromium(III) ion based on upconversion fluorescence resonance energy transfer was designed and established. Lysine-capped NaYF₄:Yb/Er upconversion nanoparticles (UCNPs) and dimercaptosuccinic acid-capped gold nanoparticles (AuNPs) were used as the energy donor and acceptor, respectively. They were bound together via electrostatic interaction, resulting in the quenching of the fluorescence of UCNPs by AuNPs. Chromium(III) ions can specifically and strongly interact with dimercaptosuccinic acid that was modified on the surface of AuNPs, leading to the separation of AuNPs from UCNPs and the recovery of fluorescence of UCNPs. The fluorescence recovery of UCNPs showed a good linear response to Cr³⁺ concentration in the range of 2–500 nM with a detection limit of 0.8 nM. This method was further applied to determine the levels of Cr³⁺ in urine. Compared with other fluorescence methods, current method displayed very high sensitivity and signal-to-noise ratio because of the excitation of near-infrared that can eliminate autofluorescence, providing a promising examination of biological samples for the diagnostic purposes.     

Sensitive and Simple Electrochemical Detection of Lead(II) with Carbon Ionic Liquid Electrode

In this paper a carbon ionic liquid electrode (CILE) was fabricated by using ionic liquid 1‐ethyl‐3‐methylimidazolium ethylsulphate ([EMIM]EtOSO₃) as the modifier and further used as the working electrode for the sensitive anodic stripping voltammetric detection of Pb²⁺. The characteristics of the CILE were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In pH 4.5 NaAc‐HAc buffer Pb²⁺ was accumulated on the surface of CILE due to the extraction effect of IL and reduced at a negative potential (‐1.20 V). Then the reduced Pb was oxidized by differential pulse anodic stripping voltammetry with an obvious stripping peak appeared at ?0.67 V. Under the optimal conditions Pb²⁺ could be detected in the concentration range from 1.0 × 10^?8 mol/L to 1.0 × 10^?6 mol/L with the linear regression equation as I_p(μA) = ?0.103 C (μmol/L) + 0.0376 (γ = 0.999) and the detection limit as 3.0 × l0^?9 mol/L (3σ). Interferences from other metal ions were investigated and Cd²⁺ could be simultaneously detected in the mixture solution. The proposed method was further applied to the trace levels of Pb²⁺ detection in water samples with satisfactory results.     

A Novel Fluorescent Reagent for Analysis of Hydrogen Peroxide

IntroductionTheoxidationofmanyclinicalsubstancesinbodyfluidsproducesaquantityofhydrogenperoxide ,sothedetermina tionoftracehydrogenperoxideisofconsiderableimportanceinclinicalchemistry .1Further,themonitoringofhydrogenperoxideisalsonecessarytoenvironmentalsciencesinceitisakeyspeciesinthereactionsofthetroposphere,beingin volvedinimportantreactionssuchasthecatalyzedoruncat alyzedaqueousphaseoxidationofSO2 andtheultraviolet en hancedaqueousphaseoxidationoforganicspecies.2 Uptonow ,variousmethods…     

Simultaneous determination of methylephedrine and pseudoephedrine in human urine by CE with electrochemiluminescence detection and its application to pharmacokeinetics

A novel method for the determination of ephedra alkaloids (methylephedrine and pseudoephedrine) was developed by electrophoresis capillary (CE) separation and electrochemiluminesence detection (ECL). The use of ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate, BMIMBF₄) improved the detection sensitivity markedly. The conditions for CE separation, ECL detection and effect of ionic liquid were investigated in detail. The two ephedra alkaloids with very similar structures were well separated and detected under the optimum conditions. The limits of detection (signal‐to‐noise ratio = 3) in standard solution were 1.8 × 10^–8 mol/L for methylephedrine (ME) and 9.2 × 10^–9 mol/L for pseudoephedrine (PSE). The limits of quantitation (signal‐to‐noise ratio = 10) in human urine samples were 2.6 × 10^?7 mol/L for ME and 3.6 × 10^–7 mol/L for PSE. The recoveries of two alkaloids at three different concentration levels in human urine samples were between 81.7 and 105.0%. The proposed method was successfully applied to the determination of ME and PSE in human urine and the monitoring of pharmacokinetics for PSE. The proposed method has potential in therapeutic drug monitoring and clinical analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

皖南尖吻蝮蛇毒糖甙水解酶(NADase)的荧光光谱研究

本文用荧光光谱法研究了皖南尖吻蝮蛇毒糖苷水解酶(NADase)的性质。在pH<6时，pH对NADase的荧光强度影响较大，而在pH>6，pH对NADase的荧光强度几乎没有什么影响，Cu²⁺的加入可引起NADase的内源荧光强度的降低，通过荧光滴定测得Cu²⁺与NADase结合常数K_EM为5.3×10³(mol/L)^-1。I^-对NADase发光的淬灭作用很小，I