Accurate ab initio potential energy surface and vibration‐rotation energy levels of hydrogen peroxide

The accurate ground‐state potential energy surface of hydrogen peroxide, H₂O₂, has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent basis sets up to septuple‐zeta quality. Results obtained with the conventional and explicitly correlated coupled‐cluster methods were compared. The core–electron correlation, scalar relativistic, and higher‐order valence–electron correlation effects were taken into account. The adiabatic effects were also discussed. The vibration–rotation energy levels of the H₂O₂, D₂O₂, and HOOD isotopologues were predicted, and the experimental vibrational fundamental wavenumbers were reproduced to 1 cm^?1 (“spectroscopic”) accuracy. © 2012 Wiley Periodicals, Inc.     

H+NH3反应势能面的量子化学研究

本文采用UCCSD(T)/aug-cc-pVTZ方法研究了H NH3反应势能面,获得了夺氢反应和交换反应过渡态的的几何结构和振动频率。夺氢反应的过渡态具有Cs对称性,其能垒为61.92 kJ/mol。交换反应的过渡态具有C3v对称性,其能垒为39.69 kJ/mol。H NH3发生形成Td对称性的反应中间体NH4里德堡自由基。与夺氢反应相比,交换反应具有更低的反应能垒,并且NH4自由基在反应中可形成长寿命的共振态,和夺氢反应形成竞争关系,因此在H NH3反应的量子动力学研究中必须同时考虑这两类反应。本文还采用更大的基组aug-cc-pVQZ和aug-cc-pV5Z研究了势能面对基组的收敛行为。     

自动化势能面搜索方法新进展

本文简要介绍了势能面搜索的两个主要问题,即过渡态搜索和全局势能面搜索,并针对这两个问题介绍了本研究组最近发展的3种方法,即限制最小化双子算法、偏置势函数辅助限制性最小化双子算法以及势能面随机行走方法．这3种方法均只需计算一阶梯度,能够用于快速自动化的搜索过渡态以及势能面．通过几个典型例子分别说明了3种方法的特点及优势．     

A fully ab initio potential energy surface for ClH2 reactive system

An ab initio analytical potential energy surface called BW3 for the ClH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCl, and the endothermicity of the Cl + H2 abstraction reaction. For the Cl + H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H + ClH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.     

A fully ab initio potential energy surface for C1H_2 reactive system

An ab initio analytical potential energy surface called BW3 for the CIH2 reactive system is presented. The fit of this surface is based on about 1 200 ab initio energy points, computed with multi-reference configuration interaction(MRCI) and scaling external correlation (SEC) method and a very large basis set. The precision in the fit is very high. The BW3 surface could reproduce correctly the dissociation energy of H2 and HCI, and the endothermicity of the Cl H2 abstraction reaction. For the Cl H2 abstraction reaction, the saddle point of BW3 lies in collinear geometries, and the barrier height is 32.84 kJ/mol; for the H CIH exchange reaction, the barrier of BW3 is also linear, with a height of 77.40 kJ/mol.     

Exploring the potential energy surface of retinal, a comparison of the performance of different methods

The ground state structure of retinal has been investigated. We found that DFT and CASSCF produce different results for the bond length alternation in a model system of retinal. Quantum mechanics/molecular mechanics calculations including the closest surrounding amino acids have been performed, using DFT and CASSCF to calculate the structure of retinal in the protein cavity. The planarity of the retinal molecule is affected by the surrounding protein. DFT and CASSCF produce different twist angles. The difference between CASSCF and DFT appears to be related to the positively charged nitrogen of the Schiff base, which leads to different pi-bond orders produced by the two methods.     

Benchmarking PES-Learn's machine learning models predicting accurate potential energy surface for quantum scattering

Machine learning (ML) models, neural networks, and Gaussian processes have been used to predict the potential energy surface taking C₂-He (both static and dynamic scenario) and NCCN-He collision systems. The surface is restricted to ∽125 points where traditional spline becomes inefficacious. Quantum dynamics is performed by solving close-coupling equation to compute cross sections benchmarking the performance of the ML models. The current study forms a basis for any future investigation of larger molecules where conventional fitting fails due to sparser ab initio points and cuts down the computational time without compromising on the quality of the surface.     

Exploring potential energy surfaces for chemical reactions: an overview of some practical methods

Potential energy surfaces form a central concept in the application of electronic structure methods to the study of molecular structures, properties, and reactivities. Recent advances in tools for exploring potential energy surfaces are surveyed. Methods for geometry optimization of equilibrium structures, searching for transition states, following reaction paths and ab initio molecular dynamics are discussed. For geometry optimization, topics include methods for large molecules, QM/MM calculations, and simultaneous optimization of the wave function and the geometry. Path optimization methods and dynamics based techniques for transition state searching and reaction path following are outlined. Developments in the calculation of ab initio classical trajectories in the Born-Oppenheimer and Car-Parrinello approaches are described.     

An analytic potential energy function for the amide–amide and amide–water intermolecular hydrogen bonds in peptides

An analytic potential energy function is proposed and applied to evaluate the amide–amide and amide–water hydrogen‐bonding interaction energies in peptides. The parameters in the analytic function are derived from fitting to the potential energy curves of 10 hydrogen‐bonded training dimers. The analytic potential energy function is then employed to calculate the N? H…O?C, C? H…O?C, N? H…OH₂, and C?O…HOH hydrogen‐bonding interaction energies in amide–amide and amide–water dimers containing N‐methylacetamide, acetamide, glycine dipeptide, alanine dipeptide, N‐methylformamide, N‐methylpropanamide, N‐ethylacetamide and/or water molecules. The potential energy curves of these systems are therefore obtained, including the equilibrium hydrogen bond distances R(O…H) and the hydrogen‐bonding energies. The function is also applied to calculate the binding energies in models of β‐sheets. The calculation results show that the potential energy curves obtained from the analytic function are in good agreement with those obtained from MP2/6‐31+G** calculations by including the BSSE correction, which demonstrate that the analytic function proposed in this work can be used to predict the hydrogen‐bonding interaction energies in peptides quickly and accurately. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009     

HSCCS自由基势能面的理论研究

在CCSD(T)/6-311G(d,f)//MP2/6-311G(d,f) ZPE水平下,计算得到含有8个异构体和11个过渡态的HSCCS自由基体系势能面,讨论了异构体的结构与稳定性及异构体之间的异构化过程.结果表明异构体m1的能量最低,除m1以外,异构体m2和m3的能量也比较低,在MP2水平上,过渡态TS1的能量比异构体m2仅高3.9kJ/mol,而在CCSD(T)水平上,TS1的能量比m2低14.6 kJ/mol,这说明异构体m2可以迅速转化为能量更低的m1.异构体m3的能量比异构体m1高49.99 kJ/mol,可以推断,在合适的实验条件下可以观测到异构体m1.     

An accurate three-dimensional potential energy surface for the He-Na_2 complex

An accurate three-dimensional potential energy surface(PES) for the He-Na2 van der Waals comple was calculated at the coupled cluster singles-and-doubles with noniterative inclusion of connecte triple(CCSD(T)) level of theory.A mixed basis set,aug-cc-pVQZ for the He atom and cc-pCVQZ for th sodium atom,and an additional(3s3p2d1f) set of midbond functions were used.The computed inte action energies in 819 configurations were fitted to a 96-parameter analytic potential model by leas squares fitting.The PES has two shallow wells corresponding to the T-shaped structure and the linea configuration,which are located at 12.5a0 and 14 a0 with depths of 1.769 and 1.684 cm-1,respectivel The whole potential energy surface exhibits weak anisotropy.Based on the fitted PES,state-to-stat differential cross sections were calculated.     

The surface potential of solvent and the intraphase pre-existing potential

Using own and literature data, the differences of real solvation energy for ferricenium and ferrocene in six solvents are found. These quantities are confronted with the calculated difference of the dielectric response energies plus nonelectrostatic energies for the redox couple. Such a comparison allows determining the sum of the surface and intraphase potentials. The comparison of these sums with the experimental values of the surface potential differences obtained by the measuring of Volta potentials allowed determining the differences of pre-existing intraphase potentials formed by solvent molecules on the ferrocene molecule. Thus, the intraphase potentials are evaluated for the first time, using an approach not based on the molecular-dynamic modeling. Using some approximations, the surface potentials of the studied solvents are found.     

Accurate potential energy surfaces for hydrogen abstraction reactions: A benchmark study on the XYG3 doubly hybrid density functional

The potential energy surface (PES) for the H + CH₄ system has been constructed with the recently developed XYG3 doubly hybrid functional, while those with the standard B3LYP hybrid functional, and the Møller–Plesset perturbation theory up to the second order (MP2) are also presented for comparison. Quantum dynamics studies demonstrated that satisfactory results on the reaction probabilities and the rate coefficients can be obtained on top of the XYG3‐PES, as compared to the results based on the highly accurate, yet expensive, CCSD(T)‐PES (Li et al., J. Chem. Phys. 2015, 142, 204302). Further investigation suggested that the XYG3 functional is useful in providing accurate rate coefficients for some larger systems involving H atom abstractions. © 2017 Wiley Periodicals, Inc.     

Ab initio potential energy surface and vibration‐rotation energy levels of sulfur dioxide

An accurate potential energy surface of sulfur dioxide, SO₂, in its ground electronic state has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent basis sets up to septuple‐zeta quality. The results obtained with the conventional and explicitly correlated coupled‐cluster methods are compared. The role of the core–electron correlation, higher‐order valence–electron correlation, scalar relativistic, and adiabatic effects in determining the structure and dynamics of the SO₂ molecule is discussed. The vibration‐rotation energy levels of the ³²SO₂ and ³⁴SO₂ isotopologues were predicted using a variational approach. It was shown that the inclusion of the aforementioned effects was mandatory to attain the “spectroscopic” accuracy. © 2017 Wiley Periodicals, Inc.     

An ab initio potential energy surface and vibrational energy levels of ZnH2

A three‐dimensional potential energy surface of the electronic ground state of ZnH₂ (${X}^1\sum _g^ +$ ) molecule is constructed from more than 7500 ab initio points calculated at the internally contracted multireference configuration interaction with the Davidson correction (icMRCI+Q) level employing large basis sets. The calculated relative energies of various dissociation reactions are in good agreement with the previous theoretical/experimental values. Low‐lying vibrational energy levels of ZnH₂, ZnD₂, and HZnD are calculated on the three‐dimensional potential energy surface using the Lanczos algorithm, and found to be in good agreement with the available experimental band origins and the previous theoretical values. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

HS和HOO抽氢反应机理的研究

在B3LYP/6-311+G(3df,2p)水平上对HS和HOO反应中的所有物种进行了几何构型优化和频率计算,采用QCISD(T)/6-311+G(3df,2p)方法获得了各物种的单点能,构建了HS和HOO反应在单、三重态势能剖面.结果表明,HS与HOO反应体系中存在2种不同的抽氢通道,在单、三重态势能面上生成的产物分别为[1P1(H2O2+1S),1P2(H2S+1 O2)]和[3P1(H2O2+3S),3P2(H2S+3O2)].标题反应主要发生在三重态势能面上,优势通道[R→3 TS2→3P2(H2S+3O2)]的活化能为9.99kJ·mol-1.此结果对认识大气硫迁移转变规律具有实际意义.     

自由基HO2与C2H2反应势能面的理论研究

应用量子化学从头计算和密度泛函理论(DFT)对HO2+C2H2反应体系的反应机理进行了研究.在B3LYP/6-311G**和CCSD(T)/6-311G**水平上计算了HO2+ C2H2反应的二重态反应势能面.计算结果表明,主要反应方式为自由基HO2的H原子和C2H2分子中的C原子结合,经过一系列异构化,最后分解得到主要产物P1 (CH2O+ HCO).此反应是放热反应,化学反应热为-321.99 kJ·mol-1.次要产物为P2 (CO2 +CH3),也是放热反应.     

New out-of-plane angle and bond angle internal coordinates and related potential energy functions for molecular mechanics and dynamics simulations

With currently used definitions of out-of-plane angle and bond angle internal coordinates, Cartesian derivatives have singularities, at ±π/2 in the former case and π in the latter. If either of these occur during molecular mechanics or dynamics simulations, the forces are not well defined. To avoid such difficulties, we provide new out-of-plane and bond angle coordinates and associated potential energy functions that inherently avoid these singularities. The application of these coordinates is illustrated by ab initio calculations on ammonia, water, and carbon dioxide. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1067–1084, 1999     

Ab initio potential energy surface and vibration‐rotation energy levels of beryllium monohydroxide

The accurate potential energy surface of beryllium monohydroxide, BeOH, in its ground electronic state has been determined from ab initio calculations using the coupled‐cluster approach in conjunction with the correlation‐consistent core‐valence basis sets up to septuple‐zeta quality. The higher‐order electron correlation, scalar relativistic, and adiabatic effects were taken into account. The BeOH molecule was confirmed to be bent at equilibrium, with the BeOH angle of 141.2° and the barrier to linearity of 129 cm⁻¹. The vibration‐rotation energy levels of the BeOH and BeOD isotopologues were predicted using a variational approach and compared with recent experimental data. The results can be useful in a further analysis of high‐resolution vibration‐rotation spectra of these interesting species. © 2016 Wiley Periodicals, Inc.