Computational NMR coupling constants: Shifting and scaling factors for evaluating 1JCH

Optimized shifting and/or scaling factors for calculating one‐bond carbon–hydrogen spin–spin coupling constants have been determined for 35 combinations of representative functionals (PBE, B3LYP, B3P86, B97‐2 and M06‐L) and basis sets (TZVP, HIII‐su3, EPR‐III, aug‐cc‐pVTZ‐J, ccJ‐pVDZ, ccJ‐pVTZ, ccJ‐pVQZ, pcJ‐2 and pcJ‐3) using 68 organic molecular systems with 88 ¹J_CH couplings including different types of hybridized carbon atoms. Density functional theory assessment for the determination of ¹J_CH coupling constants is examined, comparing the computed and experimental values. The use of shifting constants for obtaining the calculated coupling improves substantially the results, and most models become qualitatively similar. Thus, for the whole set of couplings and for all approaches excluding those using the M06 functional, the root‐mean‐square deviations lie between 4.7 and 16.4 Hz and are reduced to 4–6.5 Hz when shifting constants are considered. Alternatively, when a specific rovibrational contribution of 5 Hz is subtracted from the experimental values, good results are obtained with PBE, B3P86 and B97‐2 functionals in combination with HIII‐su3, aug‐cc‐pVTZ‐J and pcJ‐2 basis sets. Copyright © 2013 John Wiley & Sons, Ltd.     

The ORP basis set designed for optical rotation calculations

Details of generation of the optical rotation prediction (ORP) basis set developed for accurate optical rotation (OR) calculations are presented. Specific rotation calculations carried out at the density functional theory (DFT) level for model chiral methane molecule, fluorooxirane, methyloxirane, and dimethylmethylenecyclopropane reveal that the ORP set outperforms larger basis sets, among them the aug‐cc‐pVTZ basis set of Dunning (J. Chem. Phys. 1989, 90, 1007) and the aug‐pc‐2 basis set of Jensen (J. Chem. Phys. 2002, 117, 9234; J. Chem. Theory Comput. 2008, 4, 719). It is shown to be an attractive choice also in the case of larger systems, namely norbornanone, β‐pinene, trans‐pinane, and nopinone. The ORP basis set is further used in OR calculations for 24 other systems, and the results are compared to the aug‐cc‐pVDZ values. Whenever large discrepancies of results are observed, the ORP values are in an excellent agreement with the aug‐cc‐pVTZ results. The ORP basis set enables accurate specific rotation calculations at a reduced cost and thus can be recommended for routine DFT OR calculations, also for large and conformationally flexible molecules. © 2013 Wiley Periodicals, Inc.     

Nonempirical calculations of the one‐bond 29Si–13C spin–spin coupling constants taking into account relativistic and solvent corrections

The computational study of the one‐bond ²⁹Si–¹³C spin–spin coupling constants has been performed at the second‐order polarization propagator approximation (SOPPA) level in the series of 60 diverse silanes with a special focus on the main factors affecting the accuracy of the calculation including the level of theory, the quality of the basis set, and the contribution of solvent and relativistic effects. Among three SOPPA‐based methods, SOPPA(MP2), SOPPA(CC2), and SOPPA(CCSD), the best result was achieved with SOPPA(CCSD) when used in combination with Sauer's basis set aug‐cc‐pVTZ‐J characterized by the mean absolute error of calculated coupling constants against the experiment of ca 2 Hz in the range of ca 200 Hz. The SOPPA(CCSD)/aug‐cc‐pVTZ‐J method is recommended as the most accurate and effective computational scheme for the calculation of ¹J(Si,C). The slightly less accurate but essentially more economical SOPPA(MP2)/aug‐cc‐pVTZ‐J and/or SOPPA(CC2)/aug‐cc‐pVTZ‐J methods are recommended for larger molecular systems. It was shown that solvent and relativistic corrections do not play a major role in the computation of the total values of ¹J(Si,C); however, taking them into account noticeably improves agreement with the experiment. The rovibrational corrections are estimated to be of about 1 Hz or 1–1.5% of the total value of ¹J(Si,C). Copyright © 2014 John Wiley & Sons, Ltd.     

Highly Accurate CCSD(T) and DFT–SAPT Stabilization Energies of H‐Bonded and Stacked Structures of the Uracil Dimer

The CCSD(T) interaction energies for the H‐bonded and stacked structures of the uracil dimer are determined at the aug‐cc‐pVDZ and aug‐cc‐pVTZ levels. On the basis of these calculations we can construct the CCSD(T) interaction energies at the complete basis set (CBS) limit. The most accurate energies, based either on direct extrapolation of the CCSD(T) correlation energies obtained with the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets or on the sum of extrapolated MP2 interaction energies (from aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets) and extrapolated ΔCCSD(T) correction terms [difference between CCSD(T) and MP2 interaction energies] differ only slightly, which demonstrates the reliability and robustness of both techniques. The latter values, which represent new standards for the H‐bonding and stacking structures of the uracil dimer, differ from the previously published data for the S22 set by a small amount. This suggests that interaction energies of the S22 set are generated with chemical accuracy. The most accurate CCSD(T)/CBS interaction energies are compared with interaction energies obtained from various computational procedures, namely the SCS–MP2 (SCS: spin‐component‐scaled), SCS(MI)–MP2 (MI: molecular interaction), MP3, dispersion‐augmented DFT (DFT–D), M06–2X, and DFT–SAPT (SAPT: symmetry‐adapted perturbation theory) methods. Among these techniques, the best results are obtained with the SCS(MI)–MP2 method. Remarkably good binding energies are also obtained with the DFT–SAPT method. Both DFT techniques tested yield similarly good interaction energies. The large magnitude of the stacking energy for the uracil dimer, compared to that of the benzene dimer, is explained by attractive electrostatic interactions present in the stacked uracil dimer. These interactions force both subsystems to approach each other and the dispersion energy benefits from a shorter intersystem separation.     

A Theoretical Study of the Kinetics of the Hydrogen Atom Abstraction Reactions from Cyclopropane by H,O (3P), and Cl (2P3/2) Atoms and OH Radicals

The rate constants of the H‐abstraction reactions from cyclopropane by H, O (³P), Cl (²P_3/2), and OH radicals have been calculated over the temperature range of 250?2500 K using two different levels of theory. Calculations of optimized geometrical parameters and vibrational frequencies are performed using the MP2 method combined with the cc‐pVTZ basis set and the 6–311++G(d,p) basis set. Single‐point energy calculations have been carried out with the highly correlated ab initio coupled cluster method in the space of single, double, and triple (perturbatively) electron excitations CCSD(T) using either the cc‐pVTZ, aug‐cc‐pVTZ, and aug‐cc‐pVQZ basis sets or the 6–311++G(3df,3pd) basis set. The CCSD(T) calculated potential energies have been extrapolated to the complete basis limit (CBS) limit. The Full Configuration Interaction (FCI) energies have been also estimated using the continued‐fraction approximation as proposed by Goodson (J. Chem. Phys., 2002, 116, 6948–6956). Canonical transition‐state theory combined with an Eckart tunneling correction has been used to predict the rate constants as a function of temperature using two kinetic models (direct abstraction or complex mechanism) at two levels of theory (CCSD(T)‐cf/CBS//MP2/cc‐pVTZ and CCSD(T)‐cf/6–311++G(3df,3pd)//MP2/6–311++G(d,p)). The calculated kinetic parameters are in reasonable agreement with their literature counterparts for all reactions. In the light of these trends, the use of the Pople‐style basis sets for studying the reactivity of other systems such as larger cycloalkanes or halogenated cycloalkanes is recommended because the 6–311++G(3df,3pd) basis set is less time consuming than the aug‐cc‐pVQZ basis set. Based on our calculations performed at the CCSD(T)‐cf/CBS//MP2/cc‐pVTZ level of theory, the standard enthalpy of formation at 298 K for the cyclopropyl radical has been reassessed and its value is (290.5 ± 1.6) kJ mol^?1.     

Ab initio calculations of the Ar–ethane intermolecular potential energy surface using bond function basis sets

The intermolecular potential energy surface (PES) of argon with ethane has been studied by ab initio calculations at the levels of second‐order Møller–Plesset perturbation (MP2) theory and coupled‐cluster theory with single, double, and noniterative triple configurations (CCSD(T)) using a series of augmented correlation‐consistent basis sets. Two sets of bond functions, bf1 (3s3p2d) and bf2 (6s6p4d2f), have been added to the basis sets to show a dramatic and systematic improvement in the convergence of the entire PES. The PES of Ar–ethane is characterized by a global minimum at a near T‐shaped configuration with a well depth of 0.611 kcal mol^?1, a second minimum at a collinear configuration with a well depth of 0.456 kcal mol^?1, and a saddle point connecting the two minima. It is shown that an augmented correlation‐consistent basis set with a set of bond functions, either bf1 or bf2, can effectively produce results equivalent to the next larger augmented correlation‐consistent basis set, that is, aug‐cc‐pVDZ‐bf1 ≈ aug‐cc‐pVTZ, aug‐cc‐pVTZ‐bf1 ≈ aug‐cc‐pVQZ. Very importantly, the use of bond functions improves the PES globally, resulting accurate potential anisotropy. Finally, MP2 method is inadequate for accurate calculations, because it gives a potentially overestimated well depth and, more seriously, a poor potential anisotropy. © 2012 Wiley Periodicals, Inc.     

Improving on equilibrium isotropic nuclear shielding constants

Isotropic nuclear shielding constants at the equilibrium molecular structure σ_eq and zero‐point vibrational corrections (ZPVCs) to σ_eq are evaluated using the B3LYP/aug‐cc‐pVTZ level of theory, as well as the KT2/aug‐cc‐pVTZ level of theory. Various scaling factors and systematic corrections are obtained by linear regression to experimental shielding constants. Comparisons of the scaled and systematically corrected equilibrium and vibrationally averaged shielding constants reveal that, at the 99% confidence level, the ZPVCs via second‐order perturbation theory do not improve the agreement of B3LYP/aug‐cc‐pVTZ and KT2/aug‐cc‐pVTZ calculated shielding constants with experiment. This holds true when the same analysis is applied to CCSD(T)/aug‐cc‐pCV[TQ]Z calculated σ_eq of Teale et al. [Journal of Chemical Physics 2013, 138, 024111]. In addition, at the 99% confidence level, B3LYP/aug‐cc‐pVTZ and KT2/aug‐cc‐pVTZ scaled and systematically corrected shielding constants are found to be statistically no different from CCSD(T)/aug‐cc‐pCV[TQ]Z calculated σ_eq. The use of scaling factors and systematic corrections could thus provide a cheaper but yet reasonably accurate alternative for the study of nuclear shielding constants of larger systems.     

Computational thermochemistry of glycolaldehyde

We use a variant of the focal point analysis to refine estimates of the relative energies of the four low‐energy torsional conformers of glycolaldehyde. The most stable form is the cis‐cis structure which enjoys a degree of H‐bonding from hydroxyl H to carbonyl O; here dihedral angles τ₁ (O?C? C? O) and τ₂ (C? C? O? H) both are zero. We optimized structures in both CCSD(T)/aug‐cc‐pVDZ and aug‐cc‐pVTZ; the structures agree within 0.01 Å for bond lengths and 1.0 degrees for valence angles, but the larger basis brings the rotational constants closer to experimental values. According to our extrapolation of CCSD(T) energies evaluated in basis sets ranging to aug‐cc‐pVQZ the trans‐trans form (180°, 180°) has a relative energy of 12.6 kJ/mol. The trans‐gauche conformer (160°, ±75°) is situated at 13.9 kJ/mol and the cis‐trans form (0°, 180°) at 18.9 kJ/mol. Values are corrected for zero point vibrational energy by MP2/aug‐cc‐pVTZ frequencies. Modeling the vibrational spectra is best accomplished by MP2/aug‐cc‐pVTZ with anharmonic corrections. We compute the Watsonian parameters that define the theoretical vibrational‐rotational spectra for the four stable conformers, to assist the search for these species in the interstellar medium. Six transition states are located by G4 and CBS‐QB3 methods as well as extrapolation using energies for structures optimized in CCSD(T)/aug‐cc‐pVDZ structures. We use two isodesmic reactions with two well‐established thermochemical computational schemes G4 and CBS‐QB3 to estimate energy enthalpy and Gibbs energy of formation as well as the entropy of the gas phase system. Our extrapolated electronic energies of species appearing in the isodesmic reactions produce independent values of thermodynamic quantities consistent with G4 and CBS‐QB3. © 2013 Wiley Periodicals, Inc.     

Prediction of water's isotropic nuclear shieldings and indirect nuclear spin–spin coupling constants (SSCCs) using correlation‐consistent and polarization‐consistent basis sets in the Kohn–Sham basis set limit

Density functional theory (DFT) was used to estimate water's isotropic nuclear shieldings and indirect nuclear spin–spin coupling constants (SSCCs) in the Kohn–Sham (KS) complete basis set (CBS) limit. Correlation‐consistent cc‐pVxZ and cc‐pCVxZ (x = D, T, Q, 5, and 6), and their modified versions (ccJ‐pVxZ, unc‐ccJ‐pVxZ, and aug‐cc‐pVTZ‐J) and polarization‐consistent pc‐n and pcJ‐n (n = 0, 1, 2, 3, and 4) basis sets were used, and the results fitted with a simple mathematical formula. The performance of over 20 studied density functionals was assessed from comparison with the experiment. The agreement between the CBS DFT‐predicted isotropic shieldings, spin–spin values, and the experimental values was good and similar for the modified correlation‐consistent and polarization‐consistent basis sets. The BHandH method predicted the most accurate ¹H, ¹⁷O isotropic shieldings and ¹J(OH) coupling constant (deviations from experiment of about ? 0.2 and ? 1 ppm and 0.6 Hz, respectively). The performance of BHandH for predicting water isotropic shieldings and ¹J(OH) is similar to the more advanced methods, second‐order polarization propagator approximation (SOPPA) and SOPPA(CCSD), in the basis set limit. Copyright © 2008 John Wiley & Sons, Ltd.     

DSD‐PBEP86‐NL and DOD‐PBEP86‐NL functionals for noncovalent interactions: Basis set effects and tentative applications to large noncovalent systems

Basis set effects on the DSD‐PBEP86‐NL and DOD‐PBEP86‐NL functionals for noncovalent interactions have been extensively studied in this work. The cc‐pVXZ (X = D, T, Q, 5, 6) and augmented aug‐cc‐pVXZ (X = D, T, Q) basis sets are systematically tested without counterpoise (CP) corrections against the well‐known S66 database. Additionally, the basis sets of def2‐TZVPP and def2‐TZVPPD are also examined. Based on our computations, the performances of the aug‐cc‐pVQZ, cc‐pV5Z, and cc‐pV6Z basis sets are very approximate to those obtained with the def2‐QZVP basis set for both the DSD‐PBEP86‐NL and DOD‐PBEP86‐NL functionals. Note that the short‐range attenuation parameters for these two functionals were directly optimized using the def2‐QZVP basis set without CP corrections against the S66 database. Generally speaking, the cc‐pVXZ (X = D, T, Q), aug‐cc‐pVXZ (X = D, T, Q), def2‐TZVPP, and def2‐TZVPPD basis sets favor half CP correction for these two functionals. Nevertheless, the aug‐cc‐pVQZ basis set already performs well without any CP correction, especially for the DOD‐PBEP86‐NL functional. With respect to accuracy and computational cost, the cc‐pVTZ and def2‐TZVPP basis sets with half CP corrections are recommended for these two functionals to evaluate interaction energies of large noncovalent complexes.     

New global potential energy surface of the MgH2 system and dynamics studies of the reaction H + MgH → Mg + H2

A new global potential energy surface for the ground state of MgH₂ was constructed using the permutation invariant polynomial neural network method. About 70 000 ab initio energy points were calculated via the multi‐reference configuration interaction method method with aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets, and these points were used to construct the potential energy surface (PES). To avoid basis set superposition error, the basis set was extrapolated to the complete basis set limit using the two point energy extrapolation formula. The root mean square error of the present PES is only 8.85 meV. Initial state (v = 0, j = 0) dynamics studies were performed using the time‐dependent wave packet method with a second‐order split operator for the total angular momentum J up to a value of 50. Furthermore, the reaction probability, integral cross section, and thermal rate constant are reported and compared with available theoretical studies.     

F2 dimer: Improved intermolecular potential energy surface using ab initio calculations

A computational study on the intermolecular potential energy of 44 different orientations of F₂ dimers is presented. Basis set superposition error (BSSE) corrected potential energy surface is calculated using the supermolecular approach at CCSD(T) and QCISD(T) levels of theory. The interaction energies obtained using the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets are extrapolated to the complete basis set limit using the latest extrapolation scheme. The basis set effect is checked and it is found that the extrapolated intermolecular energies provide the best compromise between the accuracy and computational cost. Among 1320 energy points of F₂–F₂ system covering more relative orientations, the most stable structure of the dimers was obtained with a well depth of ?146.62 cm^?1 that related to cross configuration, and the most unstable structure is related to linear orientation with a well depth of ?52.63 cm^?1. The calculated second virial coefficients are in good agreement with experimental data. The latest extrapolation scheme of the complete basis set limit at the CCSD(T) level of theory is used to determine the intermolecular potential energy surface of the F₂ dimer. Comparing the results obtained by the latest scheme with those by older schemes show that the new approach provides the best compromise between accuracy and computational cost.     

Conventional strain energies of azetidine and phosphetane: Can density functional theory yield reliable results?

The conventional strain energies for azetidine and phosphetane are determined within the isodesmic, homodesmotic, and hyperhomodesmotic models. Optimum equilibrium geometries, harmonic vibrational frequencies, and corresponding electronic energies and zero‐point vibrational energies are computed for all pertinent molecular systems using self‐consistent field theory, second‐order perturbation theory, and density functional theory and using the correlation consistent basis sets cc‐pVDZ, cc‐pVTZ, and cc‐pVQZ. Single point fourth‐order perturbation theory, CCSD, and CCSD(T) calculations using the cc‐pVTZ and the cc‐pVQZ basis sets are computed using the MP2/cc‐pVTZ and MP2/cc‐pVQZ optimized geometries, respectively, to ascertain the contribution of higher order correlation effects and to determine if the quadruple‐zeta valence basis set is needed when higher order correlation is included. In the density functional theory study, eight different functionals are used including B3LYP, wB97XD, and M06‐2X to determine if any functional can yield results similar to those obtained at the CCSD(T) level. © 2012 Wiley Periodicals, Inc.     

Comparison of ground and excited state polarizabilities of thiophene,cyclopentadiene, and fulvene oligomers and their cyano substituted derivatives—Ab initio study

Ab Initio study of the ground and excited state polarizabilities of thiophene, fulvene, and cyclopentadiene based conducting oligomers and their cyano derivatives have been performed using the restricted Hartree–Fock (RHF) and the configuration interaction singles (CIS) approaches, respectively, with 3‐21G* basis set. For comparison purposes, for some small oligomers (monomers and dimers), higher basis sets (6‐31G*, 6‐31+G*, aug‐cc‐pVTZ) were also employed in the computations of polarizabilities. The trends in polarizability as a function of oligomer length were investigated. For all systems, the RHF polarizability increases as n^1.2–1.3 as n gets larger and the CIS polarizability increases as n^1.4–1.6 for n less than seven or eight rings and then increases approximately linearly with n for larger n. For the thiophene based systems the dependence of the polarizability on bond length alternation (BLA) along the backbone of the oligomers was also investigated using the RHF, density functional (DFT), and CIS theories (with 3‐21G* basis set). For thiophene dimer, we also performed RHF/aug‐cc‐pVTZ calculations of polarizabilities versus BLA. We found that the polarizability is largest when BLA is near zero (for both ground and excited states), which correlates with the lowest excitation energy. Comparison with experimental results has been made where possible. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1983–1995, 2007     

Accurate calculations of dynamic first hyperpolarizability: Construction of physically justified slater‐type basis sets

An efficient procedure for construction of physically rationalized Slater‐type basis sets for calculations of dynamic hyperpolarizability is proposed. Their performance is evaluated for the DFT level calculations for model molecules, carried out with a series of functionals. Advantages of new basis sets over standard d‐aug‐cc‐pVTZ and recently developed LPOL‐(FL,FS) Gaussian‐type basis sets are discussed. © 2014 Wiley Periodicals, Inc.     

IR Low‐Temperature Matrix and ab Initio Study on β‐Alanine Conformers

For the first time the argon‐matrix low‐temperature FTIR spectra of β‐alanine are recorded. They reveal a quite complicated spectral pattern which suggests the presence of several β‐alanine conformers in the matrix. To interpret the spectra, the eighteen β‐alanine conformers, stable in the gas phase, are estimated at the B3LYP and MP2 levels combined with the aug‐cc‐pVDZ. Ten low‐energy structures are reoptimized at the QCISD/aug‐cc‐pVDZ and B3LYP and MP2 levels by using the aug‐cc‐pVTZ basis sets. Assignment of the experimental spectra is undertaken on the basis of the calculated B3LYP/aug‐cc‐pVDZ anharmonic IR frequencies as well as careful estimation of the conformer population. The presence of at least three β‐alanine conformers is demonstrated. The detailed analysis of IR spectra points to the possible presence of five additional β‐alanine conformers.     

Ab Initio and Quantum Chemical Topology studies on the isomerization of HONO to HNO2. Effect of the basis set in QCT

The article focus on the isomerization of nitrous acid HONO to hydrogen nitryl HNO₂. Density functional (B3LYP) and MP2 methods, and a wide variety of basis sets, have been chosen to investigate the mechanism of this reaction. The results clearly show that there are two possible paths: 1) Uncatalysed isomerisation, trans‐HONO → HNO₂, involving 1,2‐hydrogen shift and characterized by a large energetic barrier 49.7 ÷ 58.9 kcal/mol, 2) Catalysed double hydrogen transfer process, trans‐HONO + cis‐HONO → HNO₂ + cis‐HONO, which displays a significantly lower energetic barrier in a range of 11.6 ÷ 18.9 kcal/mol. Topological analysis of the Electron Localization Function (ELF) shows that the hydrogen transfer for both studied reactions takes place through the formation of a ‘dressed’ proton along the reaction path. 1 Use of a wide variety of basis sets demonstrates a clear basis set dependence on the ELF topology of HNO₂. Less saturated basis sets yield two lone pair basins, V₁(N), V₂(N), whereas more saturated ones (for example aug‐cc‐pVTZ and aug‐cc‐pVQZ) do not indicate a lone pair on the nitrogen atom. Topological analysis of the Electron Localizability Indication (ELI‐D) at the CASSCF (12,10) confirms these findings, showing the existence of the lone pair basins but with decreasing populations as the basis set becomes more saturated (0.35e for the cc‐pVDZ basis set to 0.06e for the aug‐cc‐pVTZ). This confirms that the choice of basis set not only can influence the value of the electron population at the particular atom, but can also lead to different ELF topology. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Structural trends of 77Se?1H spin–spin coupling constants and conformational behavior of 2‐substituted selenophenes

Experimental measurements and second‐order polarization propagator approach (SOPPA) calculations of ⁷⁷Se? ¹H spin–spin coupling constants together with theoretical energy‐based conformational analysis in the series of 2‐substituted selenophenes have been carried out. A new basis set optimized for the calculation of ⁷⁷Se? ¹H spin–spin coupling constants has been introduced by extending the aug‐cc‐pVTZ‐J basis for selenium. Most of the spin–spin coupling constants under study, especially vicinal ⁷⁷Se? ¹H couplings, demonstrated a remarkable stereochemical behavior with respect to the internal rotation of the substituent in the 2‐position of the selenophene ring, which is of major importance in the stereochemical studies of the related organoselenium compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantum‐chemistry based calibration of the alkali metal cation series (Li+Cs+) for large‐scale polarizable molecular mechanics/dynamics simulations

The alkali metal cations in the series Li⁺? Cs⁺ act as major partners in a diversity of biological processes and in bioinorganic chemistry. In this article, we present the results of their calibration in the context of the SIBFA polarizable molecular mechanics/dynamics procedure. It relies on quantum‐chemistry (QC) energy‐decomposition analyses of their monoligated complexes with representative O? , N? , S? , and Se? ligands, performed with the aug‐cc‐pVTZ(‐f) basis set at the Hartree–Fock level. Close agreement with QC is obtained for each individual contribution, even though the calibration involves only a limited set of cation‐specific parameters. This agreement is preserved in tests on polyligated complexes with four and six O? ligands, water and formamide, indicating the transferability of the procedure. Preliminary extensions to density functional theory calculations are reported.     

Compatibility of correlation‐consistent basis sets with a hybrid Hartree–Fock/density functional method

The present study examines the feasibility of combining the correlation‐consistent basis sets developed by Dunning and coworkers with the hybrid Hartree–Fock/density functional method B3LYP. Furthermore, extrapolation to the complete basis set (CBS) limit minimizes errors due to the presence of an incomplete basis set and can act as a rigorous test of the limitations of the B3LYP method. Equilibrium geometries, energies, and harmonic vibrational frequencies were determined for a series of well‐studied, yet computationally challenging, small inorganics and their respective ions. The results were then extrapolated to the CBS limit, where applicable, and compared to experiment. It was found that a union between the hybrid Hartree–Fock/density functional B3LYP method and Dunning's augmented correlation‐consistent basis sets gave results that were comparable to molecular orbital methods that explicitly account for electron correlation. Furthermore, the minimum basis set necessary to attain reasonable results for the systems studied was aug‐cc‐pVTZ. Upgrading to the aug‐cc‐pVQZ level and subsequent extrapolation to the CBS limit further improved the overall agreement with the experiment. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 207–216, 1999