Theoretical insight into the solvent effect on the stoichiometric reduction of carbonyl compounds by ammonia borane and N-methyl amine borane

For the traditional reduction of ketones and aldehydes, NH₃BH₃ ( AB ) and N-methyl amine borane ( M _n AB ) have been effective reducing agents. However, the reaction process is indefinite and different mechanisms have been proposed; also the solvent effect, which is closely related to the mechanism, has not been considered seriously. Here we employ density functional theory to carry out a comprehensive study on the mechanism. The calculated free energy of the concerted double hydrogen transfer process is lower than the hydroboration mechanism by 4.7 kcal/mol, which indicates that reduction of carbonyl by AB is likely due to be the concerted double hydrogen transfer in both aprotic (tetrahydrofuran) and protic (MeOH) solvents. For the reduction by M _n AB , the corresponding free energies of all reactions are higher than those of AB . Meanwhile, the reduction of benzaldehyde by M _n AB (n = 1, 2) also favors a concerted double hydrogen transfer rather than hydroboration.     

Towards a rational design of ruthenium CO2 hydrogenation catalysts by Ab initio metadynamics

Complete reaction pathways relevant to CO2 hydrogenation by using a homogeneous ruthenium dihydride catalyst ([Ru(dmpe)2H2], dmpe=Me2PCH2CH2PMe2) have been investigated by ab initio metadynamics. This approach has allowed reaction intermediates to be identified and free-energy profiles to be calculated, which provide new insights into the experimentally observed reaction pathway. Our simulations indicate that CO2 insertion, which leads to the formation of formate complexes, proceeds by a concerted insertion mechanism. It is a rapid and direct process with a relatively low activation barrier, which is in agreement with experimental observations. Subsequent H2 insertion into the formate--Ru complex, which leads to the formation of formic acid, instead occurs via an intermediate [Ru(eta2-H2)] complex in which the molecular hydrogen coordinates to the ruthenium center and interacts weakly with the formate group. This step has been identified as the rate-limiting step. The reaction completes by hydrogen transfer from the [Ru(eta2-H2)] complex to the formate oxygen atom, which forms a dihydrogen-bonded Ru--HHO(CHO) complex. The activation energy for the H2 insertion step is lower for the trans isomer than for the cis isomer. A simple measure of the catalytic activity was proposed based on the structure of the transition state of the identified rate-limiting step. From this measure, the relationship between catalysts with different ligands and their experimental catalytic activities can be explained.     

Theoretical mechanism for selective catalysis of ruthenium complex catalyzed hydroboration of terminal alkynes to Z‐vinylboronates

Detailed mechanism of the hydroboration of terminal alkynes catalyzed by ruthenium complex was studied using density functional theory. The calculated results suggest that the reaction proceeds in two steps: alkyne rearrangement and catalyst regeneration. Vinylboronate products with E and Z configuration are formed in this reaction. Path A forming Z‐vinylboronate is the preferred pathway. Noncovalent interaction between B? H bond and Ru centre determines the preferred pathway of the reaction. The E_gap of HOMO‐LUMO for the reactant is lowered with the assistance of ruthenium–borane complex (Ru–Cat) formation. A hypothetical control model using 1, 2‐dimethyl acetylene (internal alkyne) and styrene (terminal alkene) as the reaction substrates was designed. The calculated results suggest that the activation barrier of the rate‐determining process is too high, which make the hydroboration reaction of styrene and 1, 2‐dimethyl acetylene (CH₃C‐CCH₃) hard to occur. The results uncover the selectivity of the ruthenium complex for hydroboration of terminal alkynes. © 2014 Wiley Periodicals, Inc.     

The Role of Free N‐Heterocyclic Carbene (NHC) in the Catalytic Dehydrogenation of Ammonia–Borane in the Nickel NHC System

Enders' N‐heterocyclic carbene (NHC) dehydrogenates ammonia–borane with a relatively low barrier, producing NH₂BH₂ and NHC–(H)₂. The nickel NHC catalyst present in the reaction media can activate the NHC–(H)₂ produced to regenerate the free NHC and release H₂. The release of free NHC enables further dehydrogenation of ammonia–borane.

     

Distal Weak Coordination of Acetamides in Ruthenium(II)‐Catalyzed C−H Activation Processes

C?H activations with challenging arylacetamides were accomplished by versatile ruthenium(II) biscarboxylate catalysis. The distal C?H functionalization offers ample scope—including twofold oxidative C?H functionalizations and alkyne hydroarylations—through facile base‐assisted internal electrophilic‐type substitution (BIES) C?H ruthenation by weak O‐coordination.     

Oxygen adsorption characteristics on hybrid carbon and boron‐nitride nanotubes

In this work, first‐principles density functional theory (DFT) is used to predict oxygen adsorption on two types of hybrid carbon and boron‐nitride nanotubes (CBNNTs), zigzag (8,0), and armchair (6,6). Although the chemisorption of O₂ on CBNNT(6,6) is calculated to be a thermodynamically unfavorable process, the binding of O₂ on CBNNT(8,0) is found to be an exothermic process and can form both chemisorbed and physisorbed complexes. The CBNNT(8,0) has very different O₂ adsorption properties compared with pristine carbon nanotubes (CNTs) and boron‐nitride nanotube (BNNTs). For example, O₂ chemisorption is significantly enhanced on CBNNTs, and O₂ physisorption complexes also show stronger binding, as compared to pristine CNTs or BNNTs. Furthermore, it is found that the O₂ adsorption is able to increase the conductivity of CBNNTs. Overall, these properties suggest that the CBNNT hybrid nanotubes may be useful as a gas sensor or as a catalyst for the oxygen reduction reaction. © 2014 Wiley Periodicals, Inc.     

Tuning the Excited State of Photoactive Building Blocks for Metal‐Templated Self‐Assembly

The reaction of 2,2′:4,4′′:4′,4′′′‐quaterpyridyl (qtpy), with d⁶ ruthenium(II) (Ru^II), and rhenium(I) (Re^I) metal centers has been investigated. The pendant pyridyl groups on the products have also been methylated to produce a second series of complexes containing coordinated Meqtpy²⁺. The absorption spectra of the complexes are dominated by intraligand and charge‐transfer bands. The ruthenium(II) complexes display broad unstructured luminescence consistent with emission from a Ru(d)→diimine(π*) manifold in acetonitrile solutions. In aqueous solutions, their emissions are weaker and the lifetimes are shorter. This effect is particularly acute for complexes incorporating coordinated dipyridylpyrazine, dppz, ligands. Although the emission of the ruthenium(II) complexes containing Meqtpy²⁺ is generally shorter than their qtpy analogs, it is notable that solvent‐dependent effects are much less intense. The rhenium(I) complexes also display broad unstructured luminescence but, compared with the ruthenium(II) systems, they have a relatively short lifetime in acetonitrile. Electrochemical studies reveal that all of the Ru^II complexes display chemically reversible metal‐based oxidations. Re^I complexes only display irreversible metal‐based oxidations. In most cases, the reduction processes were not fully chemically reversible. The electrochemical and optical studies reveal that the nature of the lowest excited state of these complexes—particularly, the systems incorporating dppz—is highly dependent on the nature of the coordinated ligands. Calculations indicate that, although the excited state of most of the complexes is centered on the qtpy or Meqtpy²⁺ ligands, the excited state of the complexes containing dppz ligands is switched away from the dppz by qtpy methylation. A crystallographic study on one of the dicationic ruthenium(II) structures reveals that it forms an inclusion complex with benzene.     

Cu(II)‐promoted cyclization of hydrazonophthalazine to triazolophthalazine; Synthesis and structure diversity of six novel Cu(II)‐triazolophthalazine complexes

A novel route for the synthesis of Cu(II)‐triazolophthalazine complexes using the Cu(II)‐promoted cyclization dehydrogenation reactions of hydrazonophthalazines under reflux was presented. Two hydrazonophthalazines were cyclized to the corresponding triazolophthalazine ligands, 3‐pyridin‐2‐yl‐3,10b‐dihydro‐[1,2,4]triazolo[3,4‐a]phthalazine ( TPP ) and 3‐(3,10b‐dihydro‐[1,2,4]triazolo[3,4‐a]phthalazin‐3‐yl)‐benzoic acid ( TP3COOH ), followed by in situ complexation with Cu(II) yielding six novel Cu(II)‐triazolophthalazine complexes depending on the reaction conditions. The molecular and supramolecular structures of the Cu(II)‐triazolophthalazine complexes were discussed. The metal sites have rectangular pyramidal geometry in the [Cu(TPP)Cl₂]₂; 1 and [Cu(TP3COOEt)Cl₂(H₂O)]₂; 4 dinuclear complexes, distorted square planar in [Cu(TP3COOMe)₂Cl₂]; 3 , [Cu(TP3COOH)₂Cl₂]; 5 and [Cu(TP3COOH)₂Cl₂]·H₂O; 6 and a distorted octahedral in [Cu(TPP)(H₂O)₂(NO₃)₂]; 2 . Hirshfeld analysis showed that the O…H, C…H, Cl…H (except TP3COOH and 2 ), N…H and π‐π stacking interactions are the most important intermolecular contacts. The π‐π stacking interactions are the maximum for TP3COOH and complex 6 with net C…C/C…N contacts of 19.4% and 15.4%, respectively. The orbital–orbital interaction energies of the Cu‐N/Cu‐Cl bonds correlated inversely with the corresponding Cu‐N/Cu‐Cl distances, respectively. The charge transfer processes between Cu(II) and ligand groups were also discussed. The charge densities of the Cu(II) centers are reduced to 0.663–0.995 e due to the interactions with the ligand groups coordinating it.     

Prediction of the properties and thermodynamics of formation for energetic nitrogen‐rich salts composed of triaminoguanidinium cation and 5‐nitroiminotetrazolate‐based anions

Density functional theory and volume‐based thermodynamics calculations were performed to study the effects of different substituents and linkages on the densities, heats of formation (HOFs), energetic properties, and thermodynamics of formation for a series of energetic nitrogen‐rich salts composed of triaminoguanidinium cation and 5‐nitroiminotetrazolate anions. The results show that the ? NO₂, ? NF₂, or ? N₃ group is an effective substituent for increasing the densities of the 5‐nitroiminotetrazolate salts, whereas the effects of the bridge groups on the density are coupled with those of the substituents. The substitution of the group ? NH₂, ? NO₂, ? NF₂, ? N₃, or the nitrogen bridge is helpful for increasing the HOFs of the salts. The calculated energetic properties indicate that the ? NO₂, ? NF₂, ? N₃, or ? N?N? group is an effective structural unit for improving the detonation performance for salts. The thermodynamics of formation of the salts show that all the salts may be synthesized easily by the proposed reactions. The structure‐property relationships provide basic information for the molecular design of novel high‐energy salts. © 2012 Wiley Periodicals, Inc.     

Gradient‐driven molecule construction: An inverse approach applied to the design of small‐molecule fixating catalysts

Rational design of molecules and materials usually requires extensive screening of molecular structures for the desired property. The inverse approach to deduce a structure for a predefined property would be highly desirable, but is, unfortunately, not well defined. However, feasible strategies for such an inverse design process may be successfully developed for specific purposes. We discuss options for calculating “jacket” potentials that fulfill a predefined target requirement—a concept that we recently introduced (Weymuth and Reiher, MRS Proceedings 2013, 1524, DOI:10.1557/opl.2012.1764). We consider the case of small‐molecule activating transition metal catalysts. As a target requirement we choose the vanishing geometry gradients on all atoms of a subsystem consisting of a metal center binding the small molecule to be activated. The jacket potential can be represented within a full quantum model or by a sequence of approximations of which a field of electrostatic point charges is the simplest. In a second step, the jacket potential needs to be replaced by a chemically viable chelate‐ligand structure for which the geometry gradients on all of its atoms are also required to vanish. To analyze the feasibility of this approach, we dissect a known dinitrogen‐fixating catalyst to study possible design strategies that must eventually produce the known catalyst. © 2014 Wiley Periodicals, Inc.     

An Efficient N‐Heterocyclic Carbene‐Ruthenium Complex: Application Towards the Synthesis of Polyesters and Polyamides

The ruthenium benzimidazolylidene‐based N‐heterocyclic carbene (NHC) complex 4 catalyzes the direct dehydrogenative condensation of primary alcohols into esters and primary alcohols in the presence of amines to the corresponding amides in high yields. This efficient new catalytic system shows a high selectivity towards the conversion of diols to polyesters and of a mixture of diols and diamines to polyamides. The only side product formed in this reaction is molecular hydrogen. Remarkable is the conversion of hydroxytelechelic polytetrahydrofuran ( = 1000 g mol⁻¹)—a polydispers starting material—into a hydrolytically degradable polyether with ester linkages ( = 32 600 g mol⁻¹) and, in the presence of aliphatic diamines, into a polyether with amide linkages in the back bone ( = 16 000 g mol⁻¹).

     

Copolymerization of carbon dioxide and propylene oxide by several metallosalen‐based bifunctional catalysts

A series of new metallosalen‐based bifunctional catalysts with Co(III), Cr(III), Fe(III), Mn(III), and Ni(III) were synthesized for the first time, and a detailed study on the mechanism of the copolymerization of CO₂ and propylene oxide (PO) was performed. Meanwhile, the impact factors of the reaction conditions (metal cations, temperature, CO₂ pressure, and reaction time) on catalytic activity and selectivity were investigated. The results indicated that, with the increase of temperature, both the catalyst efficiency and the molecular weight of the copolymer decrease for all the five complexes. The salen‐Co(III) complex demonstrated higher activity under mild conditions: reaction temperature at 30 °C, copolymerization time of 24 hr, and 2 MPa of CO₂ pressure. The DSC curve indicated that the PPC by the salen‐Co(III) complex has the highest T_g of 46.19 °C. DTGA curves demonstrated that there were two thermal degradation peaks: the first is for the ester bond, and the second is for the C C bond.     

Theoretical studies on the formation mechanism and explosive performance of nitro‐substituted 1,3,5‐triazines

To develop new highly energetic materials, we have considered the design of molecules with high nitrogen content. Possible candidates include 1,3,5‐triazine derivatives. In this work, we studied potential synthetic routes for melamine using the MP2/6‐31+G(d,p)//B3LYP/6‐31G(d) level of theory. The mechanisms studied here are stepwise mechanism beginning with the dimerization of cyanamide and one‐step termolecular mechanism. The same type of mechanism is also applied to nitro‐substituted 1,3,5‐triazines. Values for the heat of formation in the solid phase were predicted from density functional theory calculations. Densities were estimated from a regression equation obtained by molecular surface electrostatic potentials. The Cheetah program was used to study the explosive performance of these compounds. In this study, we found that the explosive properties of 2‐amino‐4, 6‐dinitro‐1, 3,5‐triazine (ADNTA), and 2,4,6‐trinitro‐1,3,5‐triazine (TNTA) are similar to those of RDX and HMX, respectively. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Synthesis of fluoro‐substituted silole‐containing conjugated materials

2,5‐Dihydroxyboryl‐1,1‐dimethyl‐3,4‐bis(3‐fluorophenyl)‐silole ( 2a ) was prepared in 40% overall yield by reaction between 3‐fluorophenyl‐acetylene and dichlorodimethylsilane to yield bis[2(3‐fluorophenyl)ethynyl]dimethylsilane ( 1a ), which subsequently undergoes a reductive cyclization reaction using an excess of lithium naphthalenide. The fluoro substituted silole was applied as a co‐monomer in the Suzuki polycondensation reaction with 2,7‐dibromo‐9,9‐dioctyl‐fluorene. An oligomer ( 3a ) with a degree of polymerization of 6 was prepared and compared with an oligomer without fluoro substitution on the silole ( 3b ), with a degree of polymerization of 4. The new oligomers were spin coated onto glass slides and showed weak green photoluminescence (PL) in the solid state. Cyclic voltammetry, visible absorption spectroscopy, and density functional theory calculations showed that the fluoro substituents were sufficiently electron withdrawing to lower both the highest occupied molecular orbital and the lowest unoccupied molecular orbital in the oligomer. Two further alternating co‐oligomers were prepared from 2,5‐dihydroxyboryl‐1,1‐dimethyl‐3,4‐bis(phenyl)‐silole ( 2b ) and 1,3‐dibromo‐5‐fluoro‐benzene ( 4a ) or 1,3‐dibromobenzene ( 4b ). These oligomers both had degrees of polymerization of 8 and showed green PL in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5116–5125, 2009     

Pincer and diamine Ru and Os diphosphane complexes as efficient catalysts for the dehydrogenation of alcohols to ketones

The ruthenium and osmium complexes [MCl₂(diphosphane)(L)] (M=Ru, Os; L=bidentate amino ligand) and [MCl(CNN)(dppb)] (CNN=pincer ligand; dppb=1,4‐bis‐ (diphenylphosphino)butane), containing the N–H moiety, have been found to catalyze the acceptorless dehydrogenation of alcohols in tBuOH and in the presence of KOtBu. The compounds trans‐[MCl₂(dppf)(en)] (M=Ru 7 , Os 13 ; dppf=1,1′‐bis(diphenylphosphino)ferrocene; en=ethylenediamine) display very high activity and different substrates, including cyclic and linear alcohols, are efficiently oxidized to ketones by using 0.8–0.04 mol % of catalyst. The effect of the base and the comparison of the catalytic activity of the Ru versus Os complexes are reported. The ruthenium complex 7 generally leads to a faster conversion into ketones with respect to the osmium complex 13 , which displays better activity in the dehydrogenation of 5‐en‐3β‐hydroxy steroids. The synthesis of new Ru and Os complexes [MCl₂(PP)(L)] (PP=dppb, dppf; L=(±)‐trans‐1,2‐diaminocyclohexane, 2‐(aminomethyl)pyridine, and 2‐aminoethanol) of trans and cis configuration is also reported.