Verification and Biophysical Characterization of a New Three‐Color Förster Resonance‐Energy‐Transfer (FRET) System in DNA

We report on a new three‐color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin‐2(1H)‐one)‐derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A₁, and a Cy dye as A₂ (FRET=Förster resonance‐energy‐transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time‐resolved mode. The FRET system was established on double‐stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules.     

Modulation of FRET efficiency by donor-acceptor ratio in co-condensed fluorophore-silica nanoconjugates

Förster resonance energy transfer (FRET) in nanocomposites is an important step in many applications. In order to maximize the amount of energy transferred from donor, D, to an acceptor, A, it is essential to minimize self-quenching of the donor. In the present work, fluorescein (D) and rhodamine B (A) are covalently bound into silica nanoshells (C-dye-SNS) with varying D:A ratio where the amount of A has been held constant. The total number of dye molecules is varied from 24 to 140 per nanoshell keeping the number of A molecules at ~13 ​± ​2 molecules per particle. In these conditions, FRET is found to be governed by the D:A ratio. An energy transfer process associated with maximum efficiency of 77% with time constant of 130 ps has been observed in these nanoconjugates. Fast fluorescence decays for D and corresponding risetime for A are observed in the present systems, unlike in those with high concentration of D and A (~1000 molecules/nanoshell). Thus, the presently used dye concentrations are found to be more appropriate than the higher concentration used earlier.     

ROFRET: A Molecular‐Scale Fluorescent Probe Displaying Viscosity‐Enhanced Intramolecular Förster Energy Transfer

The fluorescent probe ROFRET contains a Bodipy molecular rotor connected through a short triazole‐based spacer to a fully alkylated Bodipy. Förster resonance energy transfer takes place from the rotor to the other Bodipy, and is enhanced to a limiting value as the viscosity of the solvent increases. Time‐resolved spectroscopy and steady‐state studies are consistent with both forward and reverse energy transfer, and delayed fluorescence.     

Investigation of the weak binding of a tetrahistidine‐tagged peptide to quantum dots by using capillary electrophoresis with fluorescence detection

Capillary electrophoresis with fluorescence detection was utilized to probe the self‐assembly between cyanine group dye labeled tetrahistidine containing peptide and CdSe/ZnS quantum dots, inside the capillary. Quantum dots and cyanine group dye labeled tetrahistidine containing peptide were injected into the capillary one after the other and allowed to self‐assemble. Their self‐assembly resulted into a measurable Förster resonance energy transfer signal between quantum dots and cyanine group dye labeled tetrahistidine containing peptide. The Förster resonance energy transfer signal increased upon increasing the cyanine group dye labeled tetrahistidine containing peptide/quantum dot molar ratio and reached a plateau at the 32/1 molar ratio. Additionally, the Förster resonance energy transfer signal was also affected by the increment of the interval time of injection and the sampling time. Online ligand exchange experiments were used to assess, the potential of a monovalent ligand of imidazole and a hexavalent ligand peptide, to displace surface bound cyanine group dye labeled peptide ligands from the quantum dots surface. Under optimal conditions, a linear relationship between the integrated peak areas and hexavalent ligand peptide was obtained at a hexavalent ligand concentration range of 0−0.5 mM. Therefore, the present assay has the potential to be applied in the online ligands detection.     

Capillary electrophoresis,a method for the determination of nucleic acid ligands covalently attached to quantum dots representing a donor of Förster resonance energy transfer

The synthesis and determination of the structure of a Förster resonance energy transfer probe intended for the detection of specific nucleic acid sequences are described here. The probe is based on the hybridization of oligonucleotide modified quantum dots with a fluorescently labeled nucleic acid sample resulting in changes of the fluorescence emission due to the energy transfer effect. The stoichiometry distribution of oligonucleotides conjugated to quantum dots was determined by capillary electrophoresis separation. The results indicate that one to four molecules of oligonucleotide are conjugated to the surface of a single nanoparticle. This conclusion is confirmed by the course of the dependence of Förster resonance energy transfer efficiency on the concentration of fluorescently labeled complementary single‐stranded nucleic acid, showing saturation. While the energy transfer efficiency of the probe hybridized with complementary nucleic acid strands was 30%, negligible efficiency was observed with a noncomplementary strand.     

High‐Contrast Red–Green–Blue Tricolor Fluorescence Switching in Bicomponent Molecular Film

Highly efficient red–green–blue (RGB) tricolor luminescence switching was demonstrated in a bicomponent solid film consisting of (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(4‐butoxyphenyl)acrylonitrile) (DBDCS) and (2Z,2′Z)‐3,3′‐(2,5‐bis(6‐(9H‐carbazol‐9‐yl)hexyloxy)‐1,4‐phenylene)bis(2‐(3,5‐bis(trifluoromethyl)phenyl)acrylonitrile) (m‐BHCDCS). Reversible RGB luminescence switching with a high ratiometric color contrast (λ_em=594, 527, 458 nm for red, green, and blue, respectively) was realized by different external stimuli such as heat, solvent vapor exposure, and mechanical force. It was shown that Förster resonance energy transfer in the bicomponent mixture could be efficiently switched on and off through supramolecular control.     

Light‐Harvesting Nanoparticle Probes for FRET‐Based Detection of Oligonucleotides with Single‐Molecule Sensitivity

Controlling the emission of bright luminescent nanoparticles by a single molecular recognition event remains a challenge in the design of ultrasensitive probes for biomolecules. Herein, we developed 20‐nm light‐harvesting nanoantenna particles, built of a tailor‐made hydrophobic charged polymer poly(ethyl methacrylate‐co‐methacrylic acid), encapsulating circa 1000 strongly coupled and highly emissive rhodamine dyes with their bulky counterion. Being 87‐fold brighter than quantum dots QDots 605 in single‐particle microscopy (with 550‐nm excitation), these DNA‐functionalized nanoparticles exhibit over 50 % total FRET efficiency to a single hybridized FRET acceptor, a highly photostable dye (ATTO665), leading to circa 250‐fold signal amplification. The obtained FRET nanoprobes enable single‐molecule detection of short DNA and RNA sequences, encoding a cancer marker (survivin), and imaging single hybridization events by an epi‐fluorescence microscope with ultralow excitation irradiance close to that of ambient sunlight.     

A capillary electrophoresis strategy to sensitively detect dynamic properties of coiled coil polypeptides

The self‐assembly behavior of polypeptides plays an essential role to form biological and functional macromolecules, which have attracted a lot of attention due to their excellent characters. Understanding the polypeptide self‐assembly systems and dynamic behaviors is fundamental to improve the potential of biomedical applications. In this work, coiled coil polypeptides PC₁₀ and PC₁₀P were designed and biosynthesized. PC₁₀ and PC₁₀P could form nanogels when the concentration of polypeptides was less than 2% (m/v). The dynamic behaviors of PC₁₀ and PC₁₀P were measured by Förster resonance energy transfer method based on a capillary electrophoresis system. The Förster resonance energy transfer efficiency of this system was 60.4%, and the distance of self‐assembled domains in the polypeptides was calculated as 6.14 nm, demonstrating that the exchange behavior occurred between two different polypeptides containing the same coiled coil region.     

Studies on synthesis and molecular dynamics simulation of dendrimers containing amino acids and peptides

A series of poly(ether-amide) dendrimers with amino acids and peptides as the peripheral functional groups was synthesized, and their structures were confirmed by nuclear magnetic resonance (NMR) and electrospray ionization-mass spectrometry (ESI-MS) spectrometry. Molecular dynamics simulation of the peptide dendrimers in solution was performed, indicating that, the prior conformations of the dendrimers were atom number dependent, i.e., with the increases of the atom number, the prior conformations were more spherical. Also, the amino acid α-C atom radial distribution indicated that, with larger peripheral groups, more back-folding of the dendrimers occurred. __________ Translated from Acta Chimica Sinica, 2007, 65(1): 21–26 [译自: 化学 通报]     

In‐capillary probing of quantum dots and fluorescent protein self‐assembly and displacement using Förster resonance energy transfer

Herein, a Förster resonance energy transfer system was designed, which consisted of CdSe/ZnS quantum dots donor and mCherry fluorescent protein acceptor. The quantum dots and the mCherry proteins were conjugated to permit Förster resonance energy transfer. Capillary electrophoresis with fluorescence detection was used for the analyses for the described system. The quantum dots and mCherry were sequentially injected into the capillary, while the real‐time fluorescence signal of donor and acceptor was simultaneously monitored by two channels with fixed wavelength detectors. An effective separation of complexes from free donor and acceptor was achieved. Results showed quantum dots and hexahistidine tagged mCherry had high affinity and the assembly was affected by His₆‐mCherry/quantum dot molar ratio. The kinetics of the self‐assembly was calculated using the Hill equation. The microscopic dissociation constant values for out of‐ and in‐capillary assays were 10.49 and 23.39 μM, respectively. The capillary electrophoresis with fluorescence detection that monitored ligands competition assay further delineated the different binding capacities of histidine containing peptide ligands for binding sites on quantum dots. This work demonstrated a novel approach for the improvement of Förster resonance energy transfer for higher efficiency, increased sensitivity, intuitionistic observation, and low sample requirements of the in‐capillary probing system.     

Synthesis of Site‐Specific Dye‐Labeled Polymer via Atom Transfer Radical Polymerization (ATRP) for Quantitative Characterization of the Well‐Defined Interchain Distance

Novel difunctional initiators that incorporate Förster/fluorescence resonance energy transfer (FRET) pairs are generated to carry out atom transfer radical polymerization of styrene, methyl methacrylate, and n‐butyl methacrylate monomers by an efficient manner. Based on the chemical structures of the initiators, the locations of the fluorophore moiety are dictated to be in the center of the chain with accurately quantified chain functionality (>90% labeling ratio). The site‐specific integration of FRET dyes into separate polymer chain centers allows for characterization of the well‐defined interchain distance quantitatively based on the response between these fluorescent probes. The reliability of this technique is verified in bulk state, which is in well agreement with the theoretical ones. This well‐defined FRET system is expected to be a promising candidate to provide a distinct physical image at a microscopic level regarding scaling chain dimension, chain interpenetration, and polymer compatibility.

     

Exploring protein structure and dynamics under denaturing conditions by single-molecule FRET analysis

Proteins are highly complex biopolymers, exhibiting a substantial degree of structural variability in their properly folded, native state. In the presence of denaturants, this heterogeneity is greatly enhanced, and fluctuations take place among vast numbers of folded and unfolded conformations via many different pathways. To better understand protein folding it is necessary to explore the structural and energetic properties of the folded and unfolded polypeptide chain, as well as the trajectories along which the chain navigates through its multi-dimensional conformational energy landscape. In recent years, single-molecule fluorescence spectroscopy has been established as a powerful tool in this research area, as it allows one to monitor the structure and dynamics of individual polypeptide chains in real time with atomic scale resolution using F?rster resonance energy transfer (FRET). Consequently, time trajectories of folding transitions can be directly observed, including transient intermediates that may exist along these pathways. Here we illustrate the power of single-molecule fluorescence with our recent work on the structure and dynamics of the small enzyme RNase H in the presence of the chemical denaturant guanidinium chloride (GdmCl). For FRET analysis, a pair of fluorescent dyes was attached to the enzyme at specific locations. In order to observe conformational changes of individual protein molecules for up to several hundred seconds, the proteins were immobilized on nanostructured, polymer coated glass surfaces specially developed to have negligible interactions with folded and unfolded proteins. The single-molecule FRET analysis gave insight into structural changes of the unfolded polypeptide chain in response to varying the denaturant concentration, and the time traces revealed stepwise transitions in the FRET levels, reflecting conformational dynamics. Barriers in the free energy landscape of RNase H were estimated from the kinetics of the transitions.     

Capillary electrophoretic studies on displacement and proteolytic cleavage of surface bound oligohistidine peptide on quantum dots

Subtle changes in the chemical structure or the composition of surface bound ligands on quantum dots (QDs) remain difficult to detect. Here we describe a facile setup for fluorescence detection coupled capillary electrophoresis (CE-FL) and its application in monitoring ligand displacement on QDs through metal-affinity driven assembly. We also describe the use of CE-FL to monitor amide bond cleavage by a specific protease, based on Förster resonance energy transfer (FRET) between Cy5 and QDs spaced by a hexahistidine peptide (H6–Cy5). CE-FL allowed separation of unbound QDs and ligand bound QDs and also revealed an ordered assembly of H6–Cy5 on QDs. In a ligand displacement experiment, unlabeled hexahistidine peptide gradually displaced surface bound H6–Cy5 until finally reaching equilibrium. The displacement intermediates were clearly separated on CE-FL. Proteolytic cleavage of surface bound H6–Cy5 by thrombin was monitored by CE-FL through mobility shift, peak broadening, and FRET changes. Enzymatic parameters thus obtained were comparable with those measured by fluorescence spectroscopy.     

Synthesis and Spectroscopic Characterization of Fluorophore‐Labeled Oligospiroketal Rods

Fluorescence probes consisting of well‐established fluorophores in combination with rigid molecular rods based on spirane‐type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3‐dipolar cycloaddition between alkynes and azides (‘click’ reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA‐ or protein‐based concepts), nevertheless rigid spacer constructs, e.g., for FRET‐based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H₂O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single‐molecule fluorescence experiments with respect to i) specific rod? dye and ii) dye? dye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.     

Molecular dynamics simulation of complex multiphase flow on a computer cluster with GPUs

Compute Unified Device Architecture (CUDA) was used to design and implement molecular dynamics (MD) simulations on graphics processing units (GPU). With an NVIDIA Tesla C870, a 20–60 fold speedup over that of one core of the Intel Xeon 5430 CPU was achieved, reaching up to 150 Gflops. MD simulation of cavity flow and particle-bubble interaction in liquid was implemented on multiple GPUs using a message passing interface (MPI). Up to 200 GPUs were tested on a special network topology, which achieves good scalability. The capability of GPU clusters for large-scale molecular dynamics simulation of meso-scale flow behavior was, therefore, uncovered. Supported by the National Natural Science Foundation of China (Grant Nos. 20336040, 20221603 and 20490201), and the Chinese Academy of Sciences (Grant No. Kgcxz-yw-124)     

Enhancement of the Modulation Response of Quantum-Dot-Based Down-Converted Light through Surface Plasmon Coupling

In this paper, we first elaborate on the effects of surface plasmon (SP) coupling on the modulation responses of the emission of a light-emitting diode (LED) and its down-converted lights through colloidal quantum dots (QDs). The results of our past efforts for this subject are briefly discussed. The discussions lay the foundation for the presentation of the new experimental data of such down-converted lights in this paper. In particular, the enhancement of the modulation bandwidth (MB) of a QD-based converted light through SP coupling is demonstrated. By linking green-emitting QDs (GQDs) and/or red-emitting QDs (RQDs) with synthesized Ag nano-plates via surface modifications and placing them on a blue-emitting LED, the MBs of the converted green and red emissions are significantly increased through the induced SP coupling of the Ag nano-plates. When both GQD and RQD exist and are closely spaced in a sample, the energy transfer processes of emission-reabsorption and Förster resonance energy transfer from GQD into RQD occur, leading to the increase (decrease) in the MB of green (red) light. With SP coupling, the MB of a mixed light is significantly enhanced.     

Molecular dynamics simulations of cyclosporin A: The crystal structure and dynamic modelling of a structure in apolar solution based on NMR data

Summary The conformation of the immunosuppressive drug cyclosporin A (CPA), both in apolar solution and in crystalline state, has been studied by computer simulation techniques. Three molecular dynamics (MD) simulations have been performed: one modelling the crystal structure and two modelling the structure in apolar solution, using a restrained MD approach in which data from nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy are taken into account. The simulation of the crystalline state (MDC) concerns a system of 4 unit cells containing 16 cyclosporin A molecules and 22 water molecules, which is simulated using crystalline periodic boundary conditions. The simulations modelling the apolar solvent conformation (MDS) concern one isolated cyclosporin A molecule. In these simulations an extra term in the interatomic potential function is used, which forces the molecule to satisfy a set of 57 atom-atom distance constraints originating from nuclear Overhauser effects (NOEs) obtained from NMR spectroscopy and one distance constraint deduced from IR spectroscopy.From a comparison of the results of the crystal simulation to those of the X-ray experiment in terms of structure, atomic fluctuations, hydrogen bond pattern, etc., it is concluded that the force field that is used yields an adequate representation of crystalline cyclosporin A. Secondly, it is shown that the dynamic modelling technique that is used to obtain a structure in a polar solution from NMR distance information works well. Starting from initial conformations which have a root mean square difference of 0.14 nm both distance restrained MD simulations converge to the same final solution structure. A comparison of the crystal structure of cyclosporin A and the one in apolar solution shows that there are significant differences. The overall difference in atomic positions is 0.09 nm for the C_x atoms and 0.17 nm for all atoms. In apolar solution, the molecule is slightly more bent and the side chains of 1 MeBmt and 10 MeLeu adopt a different conformation.Abbreviations MeBmt (4R)-4[(E)-2-butenyl]-4-methyl-l-Threonine - MD Molecular dynamics - EM Energy minimization - MDC Molecular dynamics simulation of the crystal - MDS1 Restrained molecular dynamics simulation to obtain the structure in solution starting from the crystal structure - MDS2 Like MDS1, but starting from the SMS structure - SMS Proposed structure in solution, obtained by model building - XRAY An X-ray structure - CPA Cyclosporin A - NMR Nuclear magnetic resonance spectroscopy - NOE Nuclear Overhauser enhancement - MDS1 Mean simulated structure obtained by averaging over the time period 20–40 ps of the MDS1 simulation - MDS2 Mean simulated structure obtained by averaging over the time period 10–30 ps of the MDS2 simulation - Mean simulated structure obtained by averaging over the time period 7–15 ps and over the 16 asymmetric units in the computational box of the MDC simulation.     

基于分子动力学模拟的表面活性剂力场界面的构建及分析

以计算机模拟真实环境,根据分子动力学模拟原理以及相关应用,提出了使用分子优化软件,将分割后的分子片段在ATB网站上进行最终优化及拓扑文件的整合,并对抗盐性进行了试验验证,用在构建的界面中研究表面活性剂的活动轨迹以及离子对于此类表面活性剂的影响。在模拟过程中加入同一含量的Mg2+、Ca2+,考察这两种新型甜菜碱型两性离子表面活性剂在油水界面的密度分布及活动行为,从而研究表面活性剂结构和抗盐性之间的关系。研究结果表明,钙离子对NONA-CH3型甜菜碱界面行为的影响更为显著,它的抗盐性顺序为Na+Mg2+Ca2+;在相同外界条件下,NONA-CH2CH3的抗盐性能更优异。