Removal of Small Particles from a Porous Material by Ultrasonic Irradiation

A study has been made of the removal of small particles from a porous material by means of ultrasonic irradiation. To that purpose a microscopic theoretical model has been developed to calculate the force of a traveling acoustic wave on a spherical particle attached to the wall of a smooth, cylindrical pore inside the porous material. This force was compared with the adhesion force between a small particle and a pore wall. From the comparison between the two forces the conditions were found, at which particles are detached from pore walls and removed from the porous material. The transformation of the results gained from the microscopic model to macroscopic property (permeability) of the porous material was made by means of the Kozeny relation. The aim is to be able to understand and predict qualitatively the influence of relevant parameters on the ultrasonic cleaning process. Predictions made with the theoretical model were compared with data from experiments carried out with ultrasound to remove particles from Berea sandstone. The agreement is reasonable.     

空心材料导热性能预测研究

本文建立了一种预测空心材料导热性的方法。研究了空心材料的导热性。用柱形空心材料分析了体分比和孔洞的排列方式对整体材料导热性的影响，用圆柱形、方柱形空心材料和含裂纹材料，分析了空心形状对材料导热性的影响。同他人的实验结果和某些现有的理论模型比较表明，本文方法是有效的。本文的结果能够很好地解释实验结果。     

Rearrangement of fine particles in porous media causing reduction of permeability and formation of preferred pathways of flow: Experimental findings and a conceptual model

The rearrangement of matrix configuration due to the redistribution of clay particles was studied by introducing different suspensions into porous media. Clay (kaolinite) with low CEC (cation exchange capacity) and small flocs of high CEC clay (smectite) accumulated in regions of slow flow. In some experiments this was followed by rapid accumulation in regions of high velocity, impairing flow to a considerable degree. Clay with high CEC formed more voluminous structures which could bridge over a passage and impair the flow.In either case, whether small or large units of clay are involved, the final flow occurred mainly through open, preferred pathways. Such processes of redistribution and appearance of flow pathways may occur in subsurface porous media aquifers where forced gradients exist (e.g. in aquifers near the perforation of pumping wells and in places where large quantity of water are naturally or artificially recharged and in producing gas and oil fields).     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

Mathematical model of two-phase fluid nonlinear flow in low-permeability porous media with applications

IntroductionItisasuccessfulexampleinadevelopmentstoryofscienceandtechnologyformechanicsoffluidsinporousmediatocombinewithengineeringtechnology .Fieldsinfluencedbythemechanicsinvolveddevelopmentofoil_gasandgroundwaterresources,controlonseawaterintrusionandsubsidenceandgeologichazards,geotechnicalengineeringandbioengineering ,andairlineindustry[1～ 7].Aproblemonnonlinearflowinlow_permeabilityporousmediaisbutonlyabasiconeindifferentkindsofengineeringfields,butalsooneoffrontlineresearchfieldsofmod…     

关于渗流中流线不封闭的特性和条件

本文对于流体在多孔介质中流动的特性进行理论研究和数值计算，提出两个关于渗流中流线不封闭的特性和条件，得到了在一般工程实际情况中的多孔介质区域内部不存在封闭流线的结论。本文以突变截面圆管中不可压缩渗流为算例，利用半人工瞬变方法进行数值计算，得到流体在充满多孔介质的突扩截面圆管和突缩截面圆管中流动时关于速度分布和压力分布的结果。由此表明，在突变截面附近的渗流区域中不存在回流和分离流，也不存在封闭的流线。渗流的这些流动特性不同于在无多孔介质的空间区域中的流动特性。     

Material point method of modelling and simulation of reacting flow of oxygen

Aerospace vehicles are continually being designed to sustain flight at higher speeds and higher altitudes than previously attainable. At hypersonic speeds, gases within a flow begin to chemically react and the fluid's physical properties are modified. It is desirable to model these effects within the Material Point Method (MPM). The MPM is a combined Eulerian–Lagrangian particle-based solver that calculates the physical properties of individual particles and uses a background grid for information storage and exchange. This study introduces chemically reacting flow modelling within the MPM numerical algorithm and illustrates a simple application using the AeroElastic Material Point Method (AEMPM) code. The governing equations of reacting flows are introduced and their direct application within an MPM code is discussed. A flow of 100% oxygen is illustrated and the results are compared with independently developed computational non-equilibrium algorithms. Observed trends agree well with results from an independently developed source.     

Simulation of micellar-polymericwater-flooding in a system of wells

A mathematical model of the time-dependent two-dimensional flow of a two-phase multicomponent incompressible fluid through a porous medium is proposed for the micellar-polymeric flooding of oil reservoirs. The oil displacement process is investigated numerically using an implicit first-order-accurate upwind scheme with integration over the nonlinearity on a uniform grid under the assumption of plane-radial motion in the neighborhood of the wells. The influence of the nonuniform permeability of the porous medium on the efficiency of the proposed method of improving oil recovery is analyzed using a five-point slug injection scheme.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 124–132. Original Russian Text Copyright © 2004 by Inogamov and Khabeev.     

Numerical Simulation of Thermal and Concentration Natural Convection in a Porous Cavity in the Presence of an Opposing Flow

Two-dimensional steady-state thermal concentration convection in a rectangular porous cavity is simulated numerically. The temperature and concentration gradients are horizontal and the buoyancy forces act either in the same or in opposite directions. The flow through the porous medium is described by the Darcy-Brinkman or Forchheimer equations. The SIMPLER numerical algorithm based on the finite volume approach is used for solving the problem in the velocity-pressure variables.Numerous series of calculations were carried out over the range Ra _t =3·10⁶ and 3·10⁷, 10^-6 < Da < 1, 1 < N < 20, Le=10 and 100, where Ra, Da, Le, and N are the Rayleigh, Darcy, and Lewis numbers and the buoyancy ratio, respectively. It is shown that the main effect of the presence of the porous medium is to reduce the heat and mass transfer and attenuate the flow field with decrease in permeability. For a certain combination of the Ra, Le, and N numbers the flow has a multicellular structure. The mean Nusselt and Sherwood numbers are presented as functions of the governing parameters.     

非稳态分数阶Oldroyd-B流体绕楔形体流动研究

研究了非稳态分数阶Oldroyd-B流体在多孔介质中通过楔形拉伸板的驻点流动问题。基于分数阶Oldroyd-B流体的本构模型建立了动量方程,并在其中引入了浮升力和驻点流动特征。此外,考虑了具有热松弛延迟时间的修正的分数阶Fourier定律,并将其应用于能量方程和对流换热边界条件。接着,采用与L1算法相结合的有限差分法求解控制偏微分方程。最后,分析了相关物理参数对流动的影响。结果表明,随着楔角参数的增加,流体受到的浮升力增大,导致速度加快;达西数越大,介质的孔隙度变大,流体的流动越快;此外,温度分布先略有上升后明显下降,这表明Oldroyd-B流体具有热延迟特性。     

Modeling of the hydrodynamics of a facility for removing mechanical impurities from oil

The separation of a viscous fluid flow by means of a device operating on the centrifugal principle was modeled. Parameters of the device with a specified separation size were obtained in a series of numerical experiments. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 4, pp. 108–112, July–August, 2008.     

土体颗粒物流动物质点法模拟的弹塑性和非牛顿流体本构模型比较研究

土体颗粒物流动是一种典型的大变形破坏,具有非牛顿流体的流动特征。准确模拟土体颗粒物的流动及冲击过程,对滑坡和泥石流等地质灾害的防治具有重要意义。物质点法是一种无网格粒子类方法,已在各类大变形问题中得到了广泛应用。以往土体颗粒物流动的模拟,通常采用弹塑性本构模型,但缺乏对非牛顿本构模型的模拟分析。本文引入非牛顿本构模型的模拟分析,旨在为土体颗粒物流动模拟提供一种新的方法与思路。非牛顿本构模型的模拟分析是将非牛顿广义Cross模型引入三维物质点法,通过人工阻尼力模拟颗粒间的摩擦力,对土体颗粒物的坍塌、沿斜面滑动以及冲击障碍物等问题进行了动态模拟,研究了其运动全过程,并与弹塑性本构模型的模拟结果进行了对比验证。结果表明,基于非牛顿流体本构模型的物质点法可以较好地模拟土体颗粒物加速、减速到再次稳定的流动全过程及其对障碍物的冲击效应。     

Stability of triple diffusive convection in a viscoelastic fluid-saturated porous layer

The triple diffusive convection in an Oldroyd-B fluid-saturated porous layer is investigated by performing linear and weakly nonlinear stability analyses. The condition for the onset of stationary and oscillatory is derived analytically. Contrary to the observed phenomenon in Newtonian fluids, the presence of viscoelasticity of the fluid is to degenerate the quasiperiodic bifurcation from the steady quiescent state. Under certain conditions, it is found that disconnected closed convex oscillatory neutral curves occur, indicating the requirement of three critical values of the thermal Darcy-Rayleigh number to identify the linear instability criteria instead of the usual single value, which is a novel result enunciated from the present study for an Oldroyd-B fluid saturating a porous medium. The similarities and differences of linear instability characteristics of Oldroyd-B, Maxwell, and Newtonian fluids are also highlighted. The stability of oscillatory finite amplitude convection is discussed by deriving a cubic Landau equation, and the convective heat and mass transfer are analyzed for different values of physical parameters.     

Apparent viscosity of a mixture of a Newtonian fluid and interacting particles

We investigate the behavior of fluid–particle mixtures subject to shear stress, by mean of direct simulation. This approach is meant to give some hints to explain the influence of interacting red cells on the global behavior of the blood. We concentrate on the apparent viscosity, which we define as a macroscopic quantity which characterizes the resistance of a mixture against externally imposed shear motion. Our main purpose is to explain the non-monotonous variations of this apparent viscosity when a mixture of fluid and interacting particles is submitted to shear stress during a certain time interval. Our analysis of these variations is based on preliminary theoretical remarks, and some computations for some well-chosen static configurations. To cite this article: A. Lefebvre, B. Maury, C. R. Mecanique 333 (2005).