共查询到20条相似文献,搜索用时 359 毫秒
1.
分布布喇格反射镜的反射特性 总被引:2,自引:1,他引:1
采用等效法布里珀罗(FP)腔方法对分布布喇格反射镜(DBR)的特性进行了研究,计算并讨论了上下两层DBR结构非对称模型反射率的变化.设计了DBR反射镜的反射谱中心波长为850nm的结构.随着DBR周期数的增加,腔反射率峰值逐渐增加.上下两层DBR反射镜的厚度由反射率和中心波长决定.实验表明,下DBR的周期数为30对左右,上DBR的周期数为20对左右,易实现激光输出.非对称的双层DBR的反射特性表明理论计算与实验结果基本一致. 相似文献
2.
3.
Kalluri D.K. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1988,16(1):11-16
The reflection by a suddenly created plasma half-space of a time-harmonic plane electromagnetic wave propagating in free space is considered. The problem involves a temporal discontinuity, a spatial discontinuity, and a dispersive medium. The steady-state solution is obtained by considering the basic features of the scattering processes due to each of the discontinuities in terms of analogous transmission-line models. The electric field of the reflected wave consists of two components. One component (called component A) is of the same frequency as the incident wave frequency and is due to the spatial discontinuity. The other component (called component B) is of a different frequency and arises because of the temporal discontinuity. The B component is damped out even if the plasma is only slightly lossy. The damping rate of the B component is calculated. The transient solution is obtained through the use of Laplace transforms. The solution is given in terms of Bessel-like functions. The limiting value of this solution is shown to agree with the steady-state solution. Numerical results illustrating the transient effects are for two typical cases 相似文献
4.
设计了MV级小型重复频率Marx发生器,简化了发生器充放电回路,减小了能量损失;分析了隔离电感变化时对发生器输出脉冲电压波形的影响,减小了隔离电感体积,提高了隔离有效性;优化了开关腔体结构,实现了间距连续可调,且受外围结构的变化或振动影响,13个开关间隙置于同一垂线上,火花放电时产生的紫外线或射线相互照射,加速了开关导通,减小了Marx发生器输出电压抖动。塑壳电容降压使用,提高了发生器的可靠性;通过Pspice模拟和三维静电场分析,实现了发生器小型化,整个Marx发生器放置在一个密封纯净SF6气体的金属圆筒内,体积小于0.25m3。优化设计和实验研究,发生器在高阻负载上输出峰值1.02MV、前沿约30ns的高压脉冲,发生器储能290J,电压幅度抖动约10%,前沿抖动小于10ns,可实现重复频率20Hz稳定运行。 相似文献
5.
6.
曳引机的驱动控制系统是垂直升降电梯的关键设备,对电梯性能具有重要影响,具有较大的研究价值。对一种基于多模态PID控制的永磁同步曳引机电梯驱动控制系统进行了研究。给出了曳引机驱动控制系统的总体设计方案,将系统分为主控模块、驱动模块和信号采集模块进行设计并介绍了各模块硬件电路的设计。针对曳引机控制采用了电流、速度双闭环控制算法,给出了主控制器DSP的软件流程设计,并对速度环采用的多模态PID控制算法进行了研究。在电梯公司的试验塔对设计的驱动控制系统进行现场调试,调试结果表明电梯在高、中、低速下都能够良好地跟踪给定的S型速度曲线,且超调量较小,稳态误差较小,可以满足电梯控制的性能指标要求。 相似文献
7.
8.
A. N. Chernikov V. N. Trofimov 《Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques》2014,8(5):956-960
A helium-3 adsorption refrigerator cooled with a pulse-tube cryocooler is developed. The refrigerator has two stages of adsorption pumping. The first stage is designed for the condensing and pumping of helium-4, whose cooling capacity is used for the condensation of helium-3. The second stage is designed for pumping helium-3. The final temperature reached by the refrigerator is 0.305 K. This temperature is retained for at least 24 h. The time required for helium recondensation and the obtainment of low temperature is 1.5 h. The cryostat is a self-contained instrument, as it contains no external gas-supply pipelines and the working gas is stored directly within the working volume of the refrigerator. The work is performed in the Frank Laboratory of Neutron Physics of the Joint Institute for Nuclear Research. 相似文献
9.
10.
根据Stevenson等效电路法设计了两个X波段低副瓣波导缝隙阵列天线。通过建立多个缝隙时的谐振长度提取模型,计算了存在缝隙间互耦时的谐振长度。两个阵列天线测试结果和仿真结果吻合良好,线阵中心频率实测增益为17.83dB,其仿真结果为18.2dB,实测副瓣为-28.12dB,其仿真结果为-29.97dB;平面阵列中心频率实测增益为27dB,其仿真结果为27.9dB,实测H面副瓣为-27.2dB,其仿真结果为-29.9dB,实测E面副瓣为-22dB,其仿真结果为-22dB。 相似文献
11.
由于SU-8光刻胶的内应力将会影响高深宽比结构的全金属光栅的制作质量,本文针对近年来SU-8光刻胶应力测量困难的情况,提出了一种基于激光剪切散斑干涉技术的SU-8光刻胶应变分布测量的新方法。该方法通过对被测胶体加载前后两幅干涉图像的处理,直接得到被测胶体结构的全场应变分布情况,由胶体的应变变形数据即可反映出内应力的变化和分布趋势。同时使用ANSYS有限元分析软件对同一被测胶体进行应变仿真模拟研究,获得胶体结构的变形场仿真数据。组建了实验系统,进行了实验验证,结果表明:实际测量变形量约为1.189μm,仿真的最大变形量为1.088μm,测量误差在允许范围内,且测量的形变趋势与仿真模拟结果相一致,表明激光剪切散斑干涉技术可应用于SU-8光刻胶的应变分布全场无损检测。 相似文献
12.
提出了活化法测量DD中子产额的实验方法,该方法可提高DD中子产额测量的精度。方法基于铟同位素115In与DD中子的非弹性散射反应,活化反应释放的射线被HPGe探测器记录,根据活化系统标定灵敏度推算出中子产额。分析了探测器记录的活化射线数与中子产额间的关系。介绍了一套活化测量的系统设计。通过蒙特卡罗方法模拟了活化样品出射的射线数与样品厚度的关系,模拟结果表明:样品厚度取为1 cm可兼顾活化效率和测量精度。在加速器上对铟活化样品进行了标定实验,实验结果表明:在聚变中子产额大于2109的实验中可使用铟活化诊断方法,中子产额测量的相对标准误差在10%以内。随着聚变中子产额的不断提高,铟活化测量中子产额的精度可进一步提高。 相似文献
13.
14.
The problem of stability of a self-gravitating, infinite homogeneous gas in the presence of magnetic field is investigated. The medium is assumed electrically and thermally conducting. The effect of porosity, electrical conductivity, thermal conductivity and Hall current is investigated on the self-gravitating plasma flowing through porous medium. The relevant linearized equations of the problem are stated and dispersion relation is obtained. The effect of Hall current on the condition of the instability of the system is examined for both longitudinal and transverse mode of propagation and found that in longitudinal propagation Hall effect does not change the condition of instability but modifies the Alfvén wave mode. The stability of the system is discussed by applying Routh-Hurwitz criterion and it is found that Jeans criterion determines the stability of the system. Thermal conductivity and porosity have a destabilizing influence on the medium. The general condition for instability of the system is also derived. 相似文献
15.
电子光学系统是行波管的核心部件之一,在太赫兹频段,电子束通道很小,导致高电流密度电子束的传输非常困难。基于220 GHz折叠波导行波管慢波结构设计所需束流参数,根据理论分析和电磁仿真软件,设计了一款采用均匀永磁聚焦对电子束进行约束的电子光学系统。仿真结果显示,当电子束通道直径0.3 mm、长度31 mm时,在阴阳极压差20 kV的条件下阴极发射电流141 mA,电子流通率100%。根据设计结果封接了流通管,实验结果显示,当阴阳极压差20 kV时,阴极发射电流138.5 mA,收集极电流125.5 mA,电子流通率91%。 相似文献
16.
17.
18.
针对形位不确定回转壳体内表面的测量及重构问题,提出了一种准在线纵截线测量与曲面重构方法.通过粗、精测量相结合的实现过程,首先根据技术文件提取回转壳体的基本信息,并针对内表面存在的不确定性,建立一种模糊调节规则,对回转壳体内表面的形位进行预测,实时调整激光测量的角度与位置,完成测量.搭建激光测试试验平台,开发了模块化的测试平台软件系统.采用所提方法对回转壳体内表面进行测量试验研究,得到待测回转壳体内表面的三维数据,并进一步根据回转曲面二次加工的要求对曲面的重构方法进行分析,重构回转壳体内壁的三维曲面实体模型.试验结果表明,曲面模型的相对误差绝对值平均值小于0.024%. 相似文献
19.
20.
介绍了一台大型垂直极化有界波模拟装置所用中间储能电容器(简称中储电容器)的设计过程和实验结果。电容器采用基于元件和组件的模块化设计,呈锥台状结构,支撑壳体为真空工艺玻璃钢材料。电容器容值由模拟装置等效的二级脉冲压缩回路决定,取值为1.8 nF。电容器内部绝缘介质为十二烷基苯,外部绝缘介质为45#变压器油,设计耐压3 MV,其绝缘长度主要由元件的体绝缘特性决定。采用三维电磁仿真软件估算中储电容器与中储开关构成回路的电感为659 nH,接近于实测数据623 nH。电容器上脉冲电压的测量通过对电容器电流进行积分来获取,而电流的采集采用封装在SF6气体中的3个膜电阻并联后所构成测量模块实现。实际运行数据表明,中储电容器容值达到设计值,测量探头标定系数稳定,在工作电压3.1 MV条件下未发生绝缘问题。 相似文献