Microscale plasma-initiated patterning of electrospun polymer scaffolds

Microscale plasma-initiated patterning (μPIP) is a novel micropatterning technique used to create biomolecular micropatterns on polymer surfaces. The patterning method uses a polydimethylsiloxane (PDMS) stamp to selectively protect regions of an underlying substrate from oxygen plasma treatment resulting in hydrophobic and hydrophilic regions. Preferential adsorption of the biomolecules onto either the plasma-exposed (hydrophilic) or plasma-protected (hydrophobic) regions leads to the biomolecular micropatterns. In the current work, laminin-1 was applied to an electrospun polyamide nanofibrillar matrix following plasma treatment. Radial glial clones (neural precursors) selectively adhered to these patterned matrices following the contours of proteins on the surface. This work demonstrates that textured surfaces, such as nanofibrillar scaffolds, can be micropatterned to provide external chemical cues for cellular organization.     

Stable modification of PDMS surface properties by plasma polymerization: application to the formation of double emulsions in microfluidic systems

We describe a method based on plasma polymerization for the modification and control of the surface properties of poly(dimethylsiloxane) (PDMS) surfaces. By depositing plasma polymerized acrylic acid coatings on PDMS, we succeeded to fabricate stable (several days) hydrophilic and patterned hydrophobic/hydrophilic surfaces. We used this approach to generate direct and (for the first time in this material) double emulsions in PDMS microchannels.     

亲水膜的表面改性及在膜蒸馏中的应用

膜的微孔性和疏水性是水溶液膜蒸馏的两个基本条件,迄今人们均采用疏水性高分子材料制成疏水微孔膜用于膜蒸馏研究。本文采用辐照接枝聚合和等离子体表面聚合的方法,将亲水的醋酸纤维素微孔膜和硝酸纤维素微孔膜表面疏水化改性,成功地用于膜蒸馏研究,大大扩展了疏水微孔膜的材料来源。实验结果表明,亲水膜表面改性得到的疏水膜,其膜蒸馏性能不低于疏水材料制成的膜,尤其是等离子体聚合法可以实现多种特殊单体在多孔的材料表面聚合,成为制备高性能疏水微孔膜的有效手段,为膜蒸馏的深入发展和实用化创造了有利条件。     

Solid‐state bonding of silicone elastomer to glass by vacuum oxygen plasma,atmospheric plasma,and vacuum ultraviolet light treatment

We experimentally demonstrated that treating a silicone elastomer by a vacuum oxygen plasma, an atmospheric pressure plasma, and vacuum ultraviolet (VUV) radiation resulted in different surface modifications that gave different contact angles, contact angle aging, and bond strengths. The aim of this study was to assess whether high‐throughput surface modification techniques of atmospheric pressure plasma and VUV radiation have the potential to replace conventional oxygen plasma modification. Four silicone elastomers with different hardnesses were used as specimens. The surfaces of all four silicone elastomers were successfully modified from hydrophobic to hydrophilic and they were also bonded to glass surfaces by the three surface modification techniques, although considerable variations were observed in the surface hydrophobicity and the bonding properties. The results clearly reveal that atmospheric pressure plasma and VUV treatment have the potential to replace conventional oxygen plasma treatment. In particular, VUV irradiation produced the most hydrophilic surface that was preserved for a long time. Thus, VUV irradiation is the most promising technique for realizing high‐throughput surface modification and bonding of silicone elastomers. Copyright © 2012 John Wiley & Sons, Ltd.     

The stability of radio-frequency plasma-treated polydimethylsiloxane surfaces

Polydimethylsiloxane (PDMS) is a widely used material for manufacturing lab-on-chip devices. However, the hydrophobic nature of PDMS is a disadvantage in microfluidic systems. To transform the hydrophobic PDMS surface to hydrophilic, it was treated with radio-frequency (RF) air plasma at 150, 300, and 500 mTorr pressures for up to 30 min. Following the surface treatment, the PDMS specimens were stored in air, deionized water, or 0.14 M NaCl solution at 4 degrees C, 20 degrees C, and 70 degrees C. The change in the hydrophilicity (wettability) of the PDMS surfaces was followed by contact angle measurements and Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy as a function of time. As an effect of the RF plasma treatment, the contact angles measured on PDMS surfaces dropped from 113 +/- 4 degrees to 9 +/- 3 degrees . The chamber pressure and the treatment time had no or negligible effect on the results. However, the PDMS surface gradually lost its hydrophilic properties in time. The rate of this process is influenced by the difference in the dielectric constants of the PDMS and its ambient environment. It was the smallest at low temperatures in deionized water and largest at high temperatures in air. Apparently, the OH groups generated on the PDMS surface during the plasma treatment tended toward a more hydrophilic/less hydrophobic environment during the relaxation processes. The correlation between the FTIR-ATR spectral information and the contact angle data supports this interpretation.     

How to make the Cassie wetting state stable?

Wetting of rough hydrophilic and hydrophobic surfaces is discussed. The stability of the Cassie state, with air trapped in relief details under the droplet, is necessary for the design of true superhydrophobic surfaces. The potential barrier separating the Cassie state and the Wenzel state, for which the substrate is completely wetted, is calculated for both hydrophobic and hydrophilic surfaces. When the surface is hydrophobic, the multiscaled roughness of pillars constituting the surface increases the potential barrier separating the Cassie and Wenzel states. When water fills the hydrophilic pore, the energy gain due to the wetting of the pore hydrophilic wall is overcompensated by the energy increase because of the growth of the high-energetic liquid-air interface. The potential barrier separating the Cassie and Wenzel states is calculated for various topographies of surfaces. Structural features of reliefs favoring enhanced hydrophobicity are elucidated.     

Binding of salivary proteins and oral bacteria to hydrophobic and hydrophilic surfaces in vivo and in vitro

Chemical modifications of mineral surfaces were performed in order to gain insight into what surface properties are decisive of the accumulation of dental plaque. A non-charged, hydrophilic surface was made by two consecutive plasma polymerizations, firstly with allyl alcohol, secondly with acrylic acid, followed by adsorption of a poly(ethylene glycol)-poly(ethylene imine) adduct. A strongly hydrophobic surface was obtained by plasma polymerization of hexamethyldisiloxane. Ellipsometry was used to monitor protein interaction with the surfaces. The hydrophilic surface gave very little adsorption of both a model protein, IgG, and of saliva proteins. The hydrophobic surface, on the other hand, adsorbed high amounts of both types of proteins. In vitro adhesion of an oral bacterium,S. mutans, as well as in vivo studies, gave the opposite result, the hydrophobic surface giving less adhesion and less plaque accumulation than the hydrophilic surface. A tentative explanation of this behavior is that the saliva proteins that bind to the hydrophobic surface adsorb in an unnatural conformation which does not favor bacteria adherence.     

疏水性聚丙烯酸酯人工晶状体的低温等离子体改性

通过低温等离子体表面改性技术对疏水性聚丙烯酸酯人工晶状体进行表面改性, 并对改性前后材料的表面结构、形貌和光学性能进行了表征. 静态水接触角结果显示, 经过氨等离子体处理后的人工晶状体亲水性效果最好, 同时最佳的改性时间为120 s, 改性功率为150 W. XPS分析结果进一步证实, 经等离子体处理后, 在人工晶状体表面引入了极性基团. 原子显微镜观察结果显示, 改性后材料表面更加凹凸不平, 粗糙度显著增加而透光率变化很小, 但过大功率改性的样品透光率明显下降. 时效性测试结果表明, 人工晶状体在改性14 d后疏水性恢复趋于稳定.     

Cationic electrolyte adsorption layers on hydrophilic and hydrophobic surfaces

The capillary electrokinetics method (measurements of streaming potential and current in original and hydrophobized fused quartz capillaries with radii of 5–7 μm) is employed to study the formation of adsorption layers upon contact with solutions containing a cationic polyelectrolyte, poly(diallyldimethylammonium chloride). It is shown that polyelectrolyte adsorption causes the charge reversal of both hydrophilic and hydrophobic surfaces, with a smaller amount of the substance being adsorbed on the hydrophobic than on the hydrophilic surface. The adsorption on both surfaces increases with the polymer solution concentration. The cationic polyelectrolyte adsorption on the pure quartz surface occurs mainly due to the electrostatic attraction, while, in the case of the hydrophobic surface, the contribution of hydrophobic interactions increases. The study of the layer deformability shows that, on the hydrophilic surfaces, the layer ages and its structure depends on the polymer solution concentration. On the modified surface, the deformation of even freshly formed layers is slight, which suggests that a denser layer is formed on the hydrophobic surface. In contrast to the hydrophilic surface, the polyelectrolyte is partly desorbed from the hydrophobic surface.     

特殊浸润性表面的液滴凝结

以铝片为基底, 经电化学腐蚀和沸水处理制备了多级微纳米结构; 通过气相沉积和涂油分别制备了超疏水表面、 疏水超润滑(slippery)表面和亲水slippery表面; 探究了表面不同的特殊浸润性(超亲水、 超疏水、 疏水slippery和亲水slippery)对液滴凝结的影响. 结果表明, 超亲水表面的液滴凝结属于膜状冷凝, 超疏水表面和slippery表面的液滴凝结均属于滴状冷凝. 超疏水表面液滴合并时, 合并的液滴会不定向弹离表面. 疏水slippery表面和亲水slippery表面由于表面浸润性的不同导致液滴成核密度和液滴合并的差异, 亲水slippery表面凝结液滴的最大体积远大于疏水slippery表面凝结液滴的最大体积. 4种表面的雾气收集效率由大到小依次为亲水slippery表面>疏水slippery表面>超亲水表面>超疏水表面.     

Assembly of nanoparticles at the contact line of a drying droplet under the influence of a dipped tip

The manipulation of colloidal nanoparticles (NPs) in a drying droplet has critical importance not only for several industrial applications but also their assembly into patterns on surfaces. The influence of a tip with hydrophilic or hydrophobic surfaces dipped into a drying droplet on hydrophilic or hydrophobic surfaces on the behavior of 98 nm latex NPs was investigated. The formation of concentric rings on hydrophilic glass surfaces regardless of the surface chemistry of the dipped tip was observed. On the other hand, no pattern formation on hydrophobic surfaces was observed with the insertion of the tip. With a hydrophilic tip, the concentric rings were formed due to stick-slip motion of the solvent contact line resulting from competition between pinning and capillary forces while the capillary effect was not effective until the surface of the tip was changed by adherent NPs making the tip surface available for water adherence with a hydrophobic tip, which results in the pulling of droplet towards the tip. It is also found that the tip thickness and suspension concentration significantly influences the formation of concentric rings on surfaces. This simple procedure can be used to influence the distribution or assembly of NPs in the droplet area.     

The adsorption of lysozymes: A model system

Hen egg white lysozyme was adsorbed onto clean borosilicate glass and n-pentyl silane-treated glass surfaces. Both modified (reductively methylated) and native lysozyme were studied. Variable angle X-ray photoelectron spectroscopy (VA-XPS) suggested differences in the nature of the adsorbed layer depending on substrate properties, as well as on degree of methylation of the protein. Adsorbed film thickness (as measured in the dehydrated state by XPS) ranged from 14 Å on hydrophilic glass to 25 Å on the hydrophobic surface. Degree of surface coverage ranged from 45% on the hydrophobic to 69% on the hydrophilic surface. The results suggest that lysozyme unfolds to a greater extent and covers more surface on the hydrophilic glass, possibly due to strong electrostatic interactions at the pH 7.4 conditions used in the study. An analysis of the surface structure of native hen lysozyme by molecular graphics has also been performed, suggesting that adsorption on hydrophobic surfaces should occur via the hydrophobic patch opposite the enzyme active site cleft. A comparison with human lysozyme has also been made using total internal reflection fluorescence (TIRF) spectroscopy to measure protein adsorption on model surfaces. The two proteins have significantly different interfacial properties.     

Switching and structuring of binary reactive polymer brush layers

Switchable binary polymer brushes grafted to Si-wafers were prepared from hydrophilic and hydrophobic polymer components. When exposed to solvents, either the hydrophobic or the hydrophilic component extends in to the liquid phase, depending on the polarity of the solvent. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was made photocrosslinkable in that a polystyrene copolymer containing a photodimerizing chromophore was used. In this system surfaces differing in water contact angle between 60° and 100° can be produced by variation of the solvent. The chromophore was phenylindene, which forms crosslinks upon direct UV-irradiation. Therefore, the polystyrene component can be fixed in the extended or collapsed state. It will be shown that by irradiation through an appropriate mask, surfaces can be structured and the structures fixed. In both the systems structural patterns differing in surface properties were produced and fixed photochemically.     

Cleaning Away the Oleic Acid Contaminant from Glass Surface by Negative Glow Plasma

Glass surfaces are contaminated by exposure to overheated oleic acid vapor and then cleaned by low-pressure plasma of a dc glow discharge in either air or argon. In this study, the oleic acid is used as model for hydrophobic organic contaminant and glass as a model for inorganic hydrophilic substrate. The processes of contamination and plasma cleaning are studied by atomic force microscopy (AFM), which revealed formation of oleic acid nanodroplets during contamination and, then, their removal during a few minutes of plasma cleaning. Water contact angle measurements show a much faster effect of plasma cleaning treatment, the contaminated surface changing from slightly hydrophobic to superhydrophilic in less than 30 s. This effect can be attributed to oxidation and hydroxylation of the oleic acid, as indicated by infrared absorption measurements. Also, the AFM indentation of the oleic acid nanodroplets after short plasma treatment indicates solidification of the remnant contaminant material.     

Simple and robust approach for passivating and functionalizing surfaces for use in complex media

Pluronic is a popular triblock copolymer used as a surfactant to introduce hydrophilic coatings onto many different types of material surfaces, from engineering to biomedical applications. Unfortunately, this is limited in its ability to resist fouling from complex media (i.e., blood) and leaves the surface hard for further modification. Herein, we report a simple, yet robust approach for passivating and functionalizing surfaces based on zwitterionic poly(carboxybetaine) (PCB) based triblock copolymer, which can be directly applied to surfaces to prevent nonspecific protein adsorption from undiluted blood plasma, and to provide additional functionalities needed for the attachment of biomolecules. Several hydrophobic surfaces including polydimethylsiloxane, silanized silica, and self-assembled monolayers are tested to demonstrate its applicability to a wide range of systems. This approach provides a robust, convenient, and effective surface modification method for real-world applications from simple surface passivation to specific targeting in complex media.     

Molecular packing of lysozyme,fibrinogen, and bovine serum albumin on hydrophilic and hydrophobic surfaces studied by infrared-visible sum frequency generation and fluorescence microscopy

Infrared-visible sum frequency generation (SFG) vibrational spectroscopy, in combination with fluorescence microscopy, was employed to investigate the surface structure of lysozyme, fibrinogen, and bovine serum albumin (BSA) adsorbed on hydrophilic silica and hydrophobic polystyrene as a function of protein concentration. Fluorescence microscopy shows that the relative amounts of protein adsorbed on hydrophilic and hydrophobic surfaces increase in proportion with the concentration of protein solutions. For a given bulk protein concentration, a larger amount of protein is adsorbed on hydrophobic polystyrene surfaces compared to hydrophilic silica surfaces. While lysozyme molecules adsorbed on silica surfaces yield relatively similar SFG spectra, regardless of the surface concentration, SFG spectra of fibrinogen and BSA adsorbed on silica surfaces exhibit concentration-dependent signal intensities and peak shapes. Quantitative SFG data analysis reveals that methyl groups in lysozyme adsorbed on hydrophilic surfaces show a concentration-independent orientation. However, methyl groups in BSA and fibrinogen become less tilted with respect to the surface normal with increasing protein concentration at the surface. On hydrophobic polystyrene surfaces, all proteins yield similar SFG spectra, which are different from those on hydrophilic surfaces. Although more protein molecules are present on hydrophobic surfaces, lower SFG signal intensity is observed, indicating that methyl groups in adsorbed proteins are more randomly oriented as compared to those on hydrophilic surfaces. SFG data also shows that the orientation and ordering of phenyl rings in the polystyrene surface is affected by protein adsorption, depending on the amount and type of proteins.     

Hydrophilic surface modification of polydimetylsiloxane‐co‐2‐hydroxyethylmethacrylate (PDMS‐HEMA) by Silwet L‐77 (heptamethyltrisiloxane) surface treatment

Biomaterials and their host organism's quintessential place of interaction are the surfaces of materials, as transportation of liquids within microchannels requires hydrophilic surfaces. Modifying the hydrophobic surface of polydimethylsiloxane (PDMS) into a hydrophilic one which can be used in biomaterials remains a big challenge. Herein, PDMS‐hydroxyethylmethacrylate (HEMA) films were prepared by the condensation of PDMS using isophorone diisocyanate as a cross‐linker, followed by the incorporation of HEMA via radical copolymerization. The as‐prepared PDMS‐HEMA films were thereafter hydrophilized via physical treatment with heptamethyltrisiloxane. The surface properties of the obtained PDMS‐HEMA films were characterized in wettability, morphology, topography, swelling, mechanical properties, and protein adsorption. Compared to pristine PDMS‐HEMA as control, the surface wettability, roughness, and protein adsorption of the hydrophilized PDMS‐HEMA films were significantly improved while the films also exhibited excellent optical properties. However, the improvement of the swelling properties remains insignificant, indicating that the interior morphology was still based on the hydrophobic siloxane PDMS. The long‐term hydrophilicity was considered good as no significant hydrophobic recovery was noticeable in a period of 5 months after treatment.     

Lipase surface diffusion studied by fluorescence recovery after photobleaching

We have analyzed surface diffusion properties of a variant of Thermomyces lanuginosa lipase (TLL) on hydrophilic silica and silica methylated with dichlorodimethylsilane (DDS) or octadecyltrichlorosilane (OTS). For this study a novel method for analysis of diffusion on solid surfaces was developed. The method is based on fluorescence recovery after photobleaching using confocal microscopy. When a rectangular area of the sample was photobleached, fluorescence recovery could be analyzed as one-dimensional diffusion, resulting in simplified mathematical expressions for fitting the data. The method was initially tested by measuring bovine serum albumin diffusion on glass, which led to a diffusion coefficient in good correspondence to earlier reports. For the analysis of TLL diffusion, ellipsometry data of TLL adsorption were used to calibrate fluorescence intensity to surface density of lipase, enabling measurements of the diffusion coefficient at different surface densities. The average diffusion coefficient was calculated in two time intervals after adsorption. Mobile fraction and diffusion coefficient were lowest on the OTS surface, when extrapolated to infinite surface dilution. Moreover, the diffusion rate decreased with time on the hydrophobic surfaces. Our observations can be explained by the surface dependence on the distribution of orientations and conformations of adsorbed TLL, where the transition from the closed to the catalytically active open and more hydrophobic structure is important.     

Plasma stencilling methods for cell patterning

In this paper we describe plasma stencilling techniques for patterning 10 mammalian cell lines on hydrophobic and cell repellent poly(dimethylsiloxane) (PDMS), methylated glass and bacterial grade polystyrene surfaces. An air plasma produced with a Tesla generator operating at atmospheric pressure was used with microengineered stencils for patterned surface oxidation, selectively transforming the surface to a hydrophilic state to enable cell adhesion and growth. Plasma stencilling obviates the need for directly patterning cell adhesion molecules. Instead, during cell culture, adhesion proteins from the media assemble in a bioactive form on the hydrophilic regions. Critically, the removal of protein patterning prior to cell culture provides the option to also use PDMS–PDMS plasma bonding to incorporate cell patterns within microfluidic systems. Linear patterns were generated using PDMS microchannel stencils, and polyimide stencils with through holes were used for the production of cellular arrays. For the production of smaller cellular arrays, a novel microcapillary-based dielectric barrier discharge system was developed. A numerical method to characterise the cell patterns is also introduced and was used to demonstrate that plasma stencilling is highly effective, with complete patterns confined during long term cell culture (>10 days). In summary, plasma stencilling is simple, rapid, inexpensive, reproducible and a potentially universal cell line patterning capability.

The surface energy of hydrophilic and hydrophobic adsorbents

Water vapor adsorption and heats of water wetting are studied for hydrophilic quartz, hydrophobic-hydrophilic talc, and hydrophobized Silochrom samples. Water contact angles on the materials under examination are found. The surface thermodynamic parameters of the sorbents are calculated from the data obtained. It is shown that boundary water layers on hydrophilic quartz surface are ordered to a higher extent, while those on hydrophobic basal surfaces of talc particles and hydrophobic surfaces of modified Silochrom samples are ordered to a lower extent relative to liquid water. An empirical equation relating the surface pressure of water films adsorbed on hydrophilic high-energy surfaces with the surface free energy of the latter is proposed. The values of surface free energy are estimated from this equation for a number of important hydrophilic adsorbents.