Complexation of DNA with cationic surfactants as studied by small-angle X-ray scattering

The phase behaviors of the complex formed by didodecyldimethylammonium bromide(DDAB)and cetyltrimethylammonium bromide(CTAB)interacting with three different types of DNAs,salmon testes DNA(~2000 bp),21-bp double-stranded oligonucleotides(oligo-ds DNA),and 21-nt single-stranded oligonucleotides(oligo-ss DNA)were studied by synchrotron small-angle X-ray scattering.It was found that the DNA length and flexibility,together with the positive/negative charge ratio,determined the final structure.At higher charge ratios,the DNA length exhibited negligible effect.Both oligo-ds DNA and salmon DNA formed inverted hexagonal packing of cylinders with CTAB,as well as bilayered lamella with DDAB.However,at lower charge ratios,oligo-ds DNA formed a distorted hexagonal phase with CTAB and a new structure with DDAB,which was different from the behaviors of salmon DNA.The flexible oligo-ss DNA formed rich structures that were subject to environmental disturbance.Kinetic study also indicated that the structures of the complex formed by oligo-ss DNA took much longer to mature than the structures formed by oligo-ds DNA.We attributed this result to the conformational adjustment of oligo-ss DNA in the complex.     

Study on nonlinear phase‐separation for PMMA/α‐MSAN blends by dynamic rheological and small angle light scattering measurements

The phase‐separation behavior of poly(methyl methacrylate)/poly(α‐methyl styrene‐co‐acrylonitrile) (PMMA/α‐MSAN) blends upon heating was studied through dynamic rheological measurements and time‐resolved small angle light scattering, as a function of temperatures and heating rates. The spinodal temperatures could be obtained by an examination of the anomalous critical viscoelastic properties in the vicinity of phase‐separation induced by the enhanced concentration fluctuation on the basis of the mean field theory. It is found that the dependence of the critical temperatures determined by dynamic rheological measurements and small angle light scattering on heating rates both deviates obviously from the linearity, even at the very low heating rates. Furthermore, the cloud‐point curves decrease gradually with the decrease of heating rates and present the trend of approaching T_gs of the blends. The nonlinear dependence is in consistence with that extracted from the isothermal phase‐separation behavior as reported in our previous paper. It is suggested that the equilibrium phase‐separation temperature could be hardly established by the linear extrapolating to zero in the plotting of cloud points versus heating rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1547–1555, 2006     

Oil-continuous microemulsions mixed with an amphiphilic graft copolymer or with the parent homopolymer Polymer–droplet interactions as revealed by phase behavior and light scattering

Polymer–droplet interactions have been studied in AOT/water/isooctane oil-continuous microemulsions mixed with an amphiphilic graft copolymer, or with the parent homopolymer (AOT = sodium bis(2-ethylhexyl) sulfosuccinate). The graft copolymer has an oil-soluble poly(dodecyl methacrylate) backbone and water-soluble poly(ethylene glycol) side chains. Pseudo-ternary polymer/droplet/isooctane phase diagrams have been established for both the parent homopolymer and the graft copolymer, and the two types of mixture display entirely different phase behavior. The homopolymer–droplet interaction is repulsive, and a segregative phase separation occurs at high droplet concentrations. By contrast, the graft copolymer–droplet interaction is attractive: the polymer is insoluble in the pure oil, but dissolves in the microemulsion. A comparatively high concentration of droplets is required to solubilize even small amounts of polymer. Static and dynamic light scattering has been performed in order to obtain information on structure and dynamics in the two types of mixture. For optically matched microemulsions, with a vanishing excess polarizability of the droplets, the polymer dominates the intensity of scattered light. The absolute intensity of scattered light increases as phase separation is approached owing to large-scale concentration fluctuations. Dynamic light scattering shows two populations of diffusion coefficients; one population originates from “free” microemulsion droplets and the other from the polymer (for homopolymer mixtures) or from polymer–droplet aggregates (for mixtures with the graft copolymer). The graft copolymer forms large polymer–droplet aggregates with a broad size distribution, which coexist with a significant fraction of free droplets.     

Regular microstructures in gel–surfactant complexes: Influence of water content and comparison with the surfactant structure in water

Interaction of slightly crosslinked hydrogels of poly(diallyldimethylammonium chloride) (PDADMACI) and of copolymer DADMACI/acrylamide (AAm) with sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfate (SDBS) results in significant shrinking of the gels due to the formation of polymer-surfactant complexes. Jump-wise transitions in the collapsed state were observed for the networks with the content of cationic groups 100 and 75 mol %. The structure of complexes was studied by means of X-ray scattering method. The scattering curves for collapsed gels, where most chloride anions were replaced by anions of SDS, show a set of well-pronounced narrow diffraction maxima. Fully charged “wet” complexes studied at the equilibrium swelling conditions exhibit high degree of ordering, which diminishes upon drying with the simultaneous transition from hexagonal to lamellar type of ordering. In contrast to this, for DADMACl/AAm copolymer gels (75 mol % of DADMACl monomers in the initial polymerization mixture) the ordering is less pronounced in the “wet” state and becomes more perfect upon drying. The SDS aqueous solutions of the same concentration in the absence of gel do not show such high degree of ordering, while the system of SDS/neutral AAm gel exhibits lamellar ordering typical for low-temperature phases of SDS solutions. © 1996 John Wiley & Sons, Inc.     

Liquid phase epitaxy of REBa2Cu3O7−δ single-crystalline thick films

The growth of REBa₂Cu₃O_7−δ (REBCO = rare earth elements) high-temperature superconducting thick films by liquid phase epitaxy is reviewed, which are most promising for electronic device and coated conductor applications. The paper focused on thermodynamic relations, chemical reactions and physical phenomena in the liquid phase epitaxy process, which are closely related to the control of the microstructures and properties of materials. Recent progresses achieved and the problems to be solved have been reviewed in above sections.     

Plastic deformation behavior of β phase isotactic polypropylene in plane‐strain compression at elevated temperatures

Isotactic polypropylene (iPP) rich in β crystal modification was deformed by plane‐strain compression at T = 55–100 °C. The evolution of phase structure, morphology, and orientation were studied by DSC, X‐Ray, and SEM. The most important deformation mechanisms found were interlamellar slip operating in the amorphous layers, resulting in numerous fine deformation bands and the crystallographic slip systems, including the (110)[001]_β chain slip and (110)[ ]_β transverse slip. Shear within deformation bands leads to β→α solid state phase transformation in contrast to β→smectic transformation observed at room temperature. Newly formed α crystallites deform with an advancing strain by crystallographic slip mechanism, primarily the (010)[001]_α chain slip. As a result of deformation and phase transformation within deformation bands β lamellae are locally destroyed and fragmented into smaller crystals. Deformation to high strains, above e = 1, brings further heavy fragmentation of lamellae, followed by fast rotation of crystallites with chain axis towards the direction of flow FD. This process, together with still active crystallographic slip, leads to the final texture with molecular axis of both crystalline β and α phase oriented along FD. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 92–108, 2008     

Optimization of the isocratic non-aqueous reverse phase (NARP) HPLC separation of trans/cis-α-and β-carotenes

Non-aqueous reverse phase chromatography was used to optimize the separation of all-trans-α- and β-carotenes and their cis isomers extracted from dried carrots. The technique can easily be applied to routine assays. Optimization was carried out by modifying the concentrations of methylene chloride and acetonitrile, and by studying the influence of temperature on the capacity factors and selectivity. The effect of the type of C 18 stationary phase bonding (mono- and polyfunctional) on separation was also examined. The need for polymeric bonding on the stationary phase is stressed for the realization of the trans/cis isomer separation.     

Phase Transition of a Dicyanamide with Rutile‐like Structure: Syntheses and Crystal Structures of α‐ and β‐Cd[N(CN)2]2

Cadmium dicyanamide Cd[N(CN)₂]₂ was synthesized through aqueous ion exchange at room temperature. A reversible phase transition was detected by in situ X‐ray powder diffractometry above 55 °C. The crystal structures of both phases were determined by X‐ray powder diffraction (β‐Cd[N(CN)₂]₂: T = 22 °C, a = 621.60(3), b = 748.76(4), c = 770.21(5) pm, β = 91.784(3)°, P2₁/n (no. 14), Z = 2, wR_p = 0.063, R_p = 0.050, R_F = 0.059; α‐Cd[N(CN)₂]₂: T = 150 °C, a = 624.62(5), b = 752.92(6), c = 768.30(7) pm, Pnnm (no. 58), Z = 2, wR_p = 0.083, R_p = 0.064, R_F = 0.087). Both polymorphs consist of Cd²⁺ and bent planar [N(CN)₂]^— ions. α‐Cd[N(CN)₂]₂ crystallizes analogously to rutile and is isotypic with M^II[N(CN)₂]₂(M = Mg, Cr, Mn, Co, Ni, Cu). The monoclinic low‐temperature polymorph β‐Cd[N(CN)₂]₂ is closely related to that of the orthorhombic high‐temperature polymorph α‐Cd[N(CN)₂]₂ by a translationengleiche transition of index 2.     

Structural and Magnetic Chemistry of NdBaCo2O5+δ

The crystallographic and magnetic structures of the oxygen-deficient perovskites NdBaCo₂O_5+δ (δ=0, 0.38, 0.5, 0.69) have been studied as a function of temperature by neutron powder diffraction. Long-range G-type antiferromagnetic order is realized for all samples apart from that with δ=0.5. The lack of magnetic order for δ=0.5 can be understood on the basis of a crystal-field-induced spin-state ordering between low-spin and high-spin Co³⁺. Contrary to studies of similar materials with smaller lanthanides, the δ=0 material exhibits no evidence of long-range charge ordering. No evidence of a spin-state transition as observed in YBaCo₂O₅ is found for any of our samples.     

Structures and phase diagram for the system CaTiO3-La2/3TiO3

High-resolution neutron and synchrotron X-ray powder diffraction have been used to examine various compositions across the system (1−x)CaTiO₃−xLa_2/3TiO₃. The structures at room temperature were determined according to composition: in Pbnm for 0?x?0.5, Ibmm for 0.5<x<0.7, then I4/mcm for 0.7?x<0.9, and finally in Cmmm for x?0.9. Although the four structures are the same as those proposed previously in an X-ray diffraction study, the phase boundaries are somewhat different, in particular the Pbnm↔Ibmm phase boundary has been extended from x?0.4 to x>0.5 in the current study based on our high-resolution neutron diffraction data. From in situ measurements to identify structures above room temperature, an approximate composition-temperature phase diagram has been constructed, involving four temperature-induced phase transitions: Pbnm→I4/mcm, Ibmm→I4/mcm, I4/mcm→Pm3¯m and Cmmm→P4/mmm.     

A combined X-ray diffraction and Raman scattering study of the phase transitions in Sr1−xCaxTiO3 (x=0.04, 0.06, and 0.12)

Results of powder X-ray diffraction and Raman scattering studies on the phase transitions in Sr_1−xCa_xTiO₃ (SCT) are presented for x=0.04, 0.06 and 0.12 in the temperature range 8-473 K. It is proposed that the space group of SCT in the composition range 0.06?x?0.35 is Imma with a⁰b^-b^- tilt system and not I4/mcm with a⁰a⁰c^- tilt system, as assumed by earlier workers. The lowering of the crystal symmetry from I4/mcm to Imma is supported by the observation of additional Raman lines, in agreement with the factor group analysis for the Imma space group. The structural E_g mode, characteristics of the non-cubic phase, is shown to be present even in the cubic phases of x=0.06 and x=0.12 but not of x=0.04 indicating the change in the local structure of the cubic phase of SCT for x?0.06. The presence of symmetry forbidden TO₂ mode in the Raman spectra of the cubic phase of SCT for x<0.06 and its absence for x?0.06 provides yet another characteristic feature distinguishing the I4/mcm and Imma space groups. The implications of the change in the tilt system from a⁰a⁰c^- to a⁰b^-b^- on the development of the polar order is also discussed.     

Monodisperse restricted access material with molecularly imprinted surface for selective solid‐phase extraction of 17β‐estradiol from milk

In this study, novel monodisperse restricted access media‐molecularly imprinted polymers were successfully prepared by surface initiated reversible addition‐fragmentation chain transfer polymerization using monodisperse crosslinked poly (glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) microspheres as the carrier and acryloyl chloride‐modified β‐cyclodextrin as the hydrophilic functional monomer. The surface morphology, protein exclusion, and adsorption properties of the molecularly imprinted polymers were investigated. The results show that the material has excellent monodispersity and hydrophilicity, and simultaneously exhibit high adsorption capacity, fast binding kinetics, high selectivity, and significant thermal stability. The molecularly imprinted polymers as dispersive solid‐phase extraction adsorbent combined with reversed‐phase high‐performance liquid chromatography was used to selectively enrich, separate, and analyze trace 17β‐estradiol in milk samples. The recovery of 17β‐estradiol is 88–95% with relative standard deviation of <4%, and the limits of detection and quantification of this method are 2.08 and 9.29 µg/L, respectively. The novel restricted access media‐molecularly imprinted polymer adsorbents provide an effective method for the selective extraction and detection of 17β‐estradiol directly from complex samples.     

β‐Cyclodextrin polymer@Fe3O4 based magnetic solid‐phase extraction coupled with HPLC for the determination of benzoylurea insecticides from honey,tomato, and environmental water samples

In this work, a magnetic β‐cyclodextrin polymer was successfully prepared and used as an adsorbent for the magnetic solid‐phase extraction of six benzoylurea insecticides (diflubenzuron, triflumuron, hexaflumuron, teflubenzuron, flufenoxuron, and chlorfluazuron) from honey, tomato, and environmental water samples. The influence of the main experimental conditions on the extraction was studied. Under the optimized conditions, the β‐cyclodextrin polymer@Fe₃O₄ showed an excellent extraction performance for the benzoylurea insecticides. A good linearity was obtained for the analytes in the range of 3.0–800 ng/g for honey samples, 0.3–160 ng/g for tomato samples, and 0.1–80.0 ng/mL for water samples, with the correlation coefficients above 0.9998. Satisfactory repeatabilities were achieved, with the relative standard deviations less than 5.7%. The limits of detection (S/N = 3) of the method for the benzoylurea insecticides were 0.2–0.8 ng/g for honey samples, 0.04–0.10 ng/g for tomato samples, and 0.02–0.05 ng /mL for water samples. The method was successfully used for the determination of the six benzoylurea insecticides residues in honey, tomato, and environmental water samples with a satisfactory result.