Magnetic IDA-modified hydrophilic methacrylate-based polymer microspheres for IMAC protein separation

Preparation of a new type of magnetic non-porous poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) microspheres with hydrophilic properties containing coupled iminodiacetic acid (IDA) is described. The prepared microspheres were used for the immobilization of Ni(II) or Fe(III) ions to show their application in protein binding studies. Human IgG was bound to magnetic Ni(II)-IDA-modified microspheres and conditions of its adsorption and elution were optimized. Non-specific binding of the protein to magnetic microspheres in the absence of Ni(II) ions was low. Fe(III) ions immobilized on magnetic IDA-modified microspheres were used for the specific binding of porcine pepsin, as a model phosphoprotein. The ability of phosphate buffer to release the adsorbed enzyme from the microspheres and a low adsorption of the dephosphorylated protein indicate the participation of phosphate groups in the pepsin interaction. The elaborated method represents a rapid technique that can be used not only for the separation of proteins but also for analytical purposes.     

Immobilized Metal Affinity Chromatography of Phosphorylated Proteins Using High Performance Sorbents

The interactions of two model phosphoproteins (porcine pepsin and ovalbumin) with two different immobilized metal affinity chromatography (IMAC) sorbents containing immobilized Fe³⁺, Ga³⁺, and UO₂ ²⁺ ions have been investigated under various conditions. Both proteins were adsorbed on immobilized uranyl ions under acidic conditions similar to those on immobilized Fe³⁺ and Ga³⁺ ions. The retained proteins could be released either by the presence of phosphate ions in the elution buffer (immobilized Ga³⁺ and Fe³⁺ ions) or by an increased pH (all tested immobilized ions). The IMAC sorbents employed could be used under the conditions of high-performance chromatography and are suitable for the separation and analysis of intact phosphoproteins.     

Phosphoprotein electrophoresis in the presence of Fe(III) ions

Preparation of affinity polyacrylamide gels containing immobilized Fe(III) ions for the separation of proteins exhibiting metal ion binding properties is described. The presented method enables uniform distribution of immobilized metal ions in the affinity part of the polyacrylamide separating gel. Affinity gels prepared by this way are suitable to follow the effect of different concentrations of metal ions immobilized in polyacrylamide gel on a protein electrophoretic behavior. Polyacrylamide gels containing immobilized Fe(III) ions were used to study the electrophoretic behavior of two model proteins differing in their phosphate group content: chicken ovalbumin and bovine α‐casein. For the electrophoretic separation, both the native and the denaturating conditions were used.     

借助聚丙烯酸制备铜粒子修饰电极并用于双氧水的电催化性能研究

利用羧基对金属离子的络合作用在电极表面原位制备金属粒子用于电催化过氧化氢(H2O2). 首先在电极表面电沉积聚丙烯酸, 然后化学吸附铜离子, 再用水合肼将其还原成零价铜. 铜粒子簇均匀分散在聚丙烯酸网络中, 其尺寸可通过吸附铜离子的数量和吸附-还原次数来控制. 由于铜微粒的电催化作用, 该修饰电极对H2O2表现出了良好的电流响应. 运用该方法可以在电极表面制备多种金属微粒, 并且聚丙烯酸的自由羧基可以与氨基反应, 从而可共价固定带氨基的酶和抗体, 有望构建多种新型的化学和生物传感器.     

Purification and determination of the binding site of lactate dehydrogenase from chicken breast muscle on immobilized ferric ions.

Lactate dehydrogenase from chicken breast muscle was purified to homogeneity in one step by immobilized metal ion affinity chromatography. The purified enzyme was used to localize the binding site to immobilized Fe(III) ions. After cyanogen bromide degradation and digestion with trypsin, small enzyme fragments capable of binding to immobilized Fe(III) ions were obtained. It is proposed that several histidyl groups are involved in the binding.     

Spectrometry: Speciation of Parts PER Billion of Metal Ions Using Silica and C18-Bonded Silica Columns and Graphite Furnace Atomic Absorption Spectrometry

Abstract

It is demonstrated that silica gel columns will quantitatively adsorb free Cu²⁺ and Pb²⁺ ions at pH > 8. These are eluted with 0.1 M HNO₃ but not with methanol. Negatively charged EDTA chelates are not adsorbed. Neutral APDC chelates are partially adsorbed on silica columns, but are quantitatively adsorbed on C18-bonded columns, and are eluted with methanol. The metal ions are partially adsorbed on C18-bonded columns, due to residual silanol groups. A microcolumn (1 mm i.d., 5 cm length) manifold system is described for automatic delivery of eluant (0.12 ml) to a heated atomic absorption graphite atomizer, using either methanol or 0.1 M HNO₃ in methanol eluant, allowing speciation and measurement of parts per billion of metals. These studies demonstrate that by using a mixed column or sequential columns of silica gel and C18-bonded silica, cationic and neutral metal species could be adsorbed, followed by sequential elution and measurement using methanol and then 0.1 M HNO. Negatively charged species could be measured directly in the sample eluant or obtained by difference from a total metal measurement.     

Ion-imprinted interpenetrating network gels for solid-phase extraction of heavy metal ions

In the present work, ion-imprinted interpenetrating polymer network (IPN) gels were prepared by free radical/cationic hybrid polymerisation of acrylamide (AAm) and 1,4-butanediol vinyl ether (BVE). These gels were respectively used for separation of Cu²⁺, Ni²⁺ and Zn²⁺ ions in natural water samples. Experimental conditions for effective adsorption of metal ions were optimised with respect to different experimental parameters by column procedures in detail. The optimum pH value for the adsorption of Cu²⁺, Ni²⁺ and Zn²⁺ ions on these sorbents was 6.0. Complete elution of the adsorbed metal ions from the sorbent was carried out using 1.0 mol/L of HCl solution. The optimum sample flow rate and eluent flow rate were, respectively, 1.0 and 0.3 mL/min. Common coexisting ions did not interfere with the separation and determination of the target ions. The accuracy of the proposed method was validated by analysis of the standard reference material (GBW 08301, river sediment). The measured contents of metal ions in the reference material were in good agreement with the certified values. The presented method was successfully applied for the determination of Cu²⁺, Ni²⁺ and Zn²⁺ ions in three different water samples (well water, seawater and waste water).     

不同结构二元羧酸改性棉纤维铁配合物的制备和光催化性能

分别使用3种不同结构的二元羧酸[酒石酸(TA)、 苹果酸(MA)和丁二酸(SA)]对棉纤维改性引入羧基并与Fe ³⁺离子反应制备羧酸改性棉纤维铁配合物, 考察了二元羧酸结构和浓度对改性棉纤维的羧基含量(Q_COOH)及其铁配合物的铁配合量(Q_Fe)的影响. 研究了3种羧酸改性棉纤维铁配合物作为有机染料氧化降解反应和Cr(Ⅵ)还原反应光催化剂的性能. 结果表明, 改性棉纤维的Q_COOH值随羧酸浓度的增加而增加. 不含羟基的SA比2种羟基羧酸TA和MA能给棉纤维引入更多羧基, 而2种羟基羧酸改性棉纤维铁配合物则具有更高的Q_Fe值. 3种羧酸改性棉纤维铁配合物对染料氧化降解反应和Cr(Ⅵ)还原反应都表现出显著的光催化作用, 且随其Q_Fe和辐射光强度的提高而增强. TA改性棉纤维铁配合物比其它2种配合物具有更高的光催化活性. 3种配合物不但能将Cr(Ⅵ)还原为Cr(Ⅲ)离子, 而且还能将其部分吸附去除, MA改性棉纤维铁配合物具有较高的铬离子去除效率.     

Potential of ethylenediaminedi(o-hydroxyphenylacetic acid) and N,N'-bis(hydroxybenzyl)ethylenediamine-N,N'-diacetic acid for the determination of metal ions by capillary electrophoresis

Two aromatic polyaminocarboxylate ligands, ethylenediaminedi(o-hydroxyphenylacetic acid) (EDDHA) and N,N′-bis(hydroxybenzyl)ethylenediamine-N,N′-diacetic acid (HBED), were applied for the separation of transition and heavy metal ions by the ion-exchange variant of electrokinetic chromatography. EDDHA structure contains two chiral carbon centers. It makes it impossible to use the commercially available ligand. All the studied metal ions showed two peaks, which correspond to meso and rac forms of the ligand. The separation of metal–HBED chelates was performed using poly(diallyldimethylammonium) polycations in mixed acetate–hydroxide form. Simultaneous separation of nine single- and nine double-charged HBED chelates, including In(III), Ga(III), Co(II)–(III) and Mn(II)–(III) pairs demonstrated the efficiency of 40 000–400 000 theoretical plates. The separation of Co(III), Fe(III) complexes with different arrangements of donor groups and oxidation of Co(II), Mn(II), Fe(II) ions in reaction with HBED have been discussed.     

Effect of sulfate on Cu(II) sorption to polymer-supported nano-iron oxides: behavior and XPS study

Iron oxides tend to be immobilized within nanoporous supports to improve their feasibility for practical environmental remediation including arsenic and heavy metal removal. Contrary to the co-ions, little is known concerning the effect of counter ions on the performance of the resultant composites. In this study, two hybrid sorbents (denoted as HFO-PS(-) and HFO-PS(0), respectively) were prepared by loading hydrous ferric oxide (HFO) nanoparticles onto two polystyrene beads: PS(-), negatively charged with sulfonic acid groups, and PS(0), covalently bonded with neutral chloromethyl groups. Effects of sulfate on their sorption toward Cu ions were investigated. Consistent with the case in bulky HFO particles, the amount of Cu adsorbed on HFO-PS(0) was markedly promoted by introducing sulfate. As for HFO-PS(-), with monovalent cation as background (Na(+)), it exhibited an apparent decrease in Cu sorption as a result of the competing effect of Na ions and the Cu-SO(4) complexation in solution. Contrarily, the adsorbed Cu was increased by introducing sulfate in the divalent cation background (Ca), because sulfate ions were allowed to access to the loaded HFO nanoparticles due to the screening of the sulfonic acid groups caused by Ca ions. XPS spectroscopy further demonstrated that besides the electrostatic effects, the formation of Cu-SO(4) ternary complexes also accounted for the enhanced Cu sorption on both bulky HFO and hybrid HFO sorbents in the presence of sulfate. These results indicated that the effect of counter-ion ligands on metal adsorption to hybrid iron oxides was largely dependent on the surface properties of the host materials.     

Adsorption of cadmium ions by wheat bran treated with pectinase

In this study, we investigated the surface properties of raw wheat bran (R-WB) and wheat bran treated with Pectinase PL (P-WB) to evaluating its efficacy for removal of cadmium from waste water. The concentration of cadmium ions adsorbed by them was evaluated. The concentration of carboxyl groups of R-WB (3.56 mmol/g) was greater than that of P-WB (2.11 mmol/g), which indicated that the pectin of R-WB was broken down, resulting in a decrease in the concentration of carboxyl groups due to the enzyme treatment. From the scanning electron microscope (SEM) images of P-WB, the pores were newly generated with enzyme treatment. The concentration of cadmium ions adsorbed onto R-WB was greater than that of cadmium ions adsorbed onto P-WB. These results show that the adsorption mechanism of cadmium ions onto R-WB and P-WB depends on the carboxyl groups of pectin.     

Synthesis, structures and properties of hydrolytic Al(III) aggregates and Fe(III) analogues formed with iminodiacetate-based chelating ligands

Both Al(III) and Fe(III) display a rich hydrolytic chemistry which can lead to the formation of a variety of aggregated oxo and hydroxo-bridged aggregates. The formation, structures and properties of these species are important in defining the availability and reactivity of these species in aqueous environments such as are found in biological systems and the environment. Although there are many similarities in the behaviour of the Al³⁺ and Fe³⁺ ions there are also some important differences between these two metal ions which can lead to a divergence in their chemistries. These considerations are discussed and illustrated with reference to 16 Al(III) and Fe(III) compounds, which have been crystallographically characterised, and which form in aqueous environments in the presence of chelating ligands containing the iminodiacetate functionality.     

The Affinity of Gallium(III) and Indium(III) for Nitrogen Donor Ligands

Abstract

Dedicated to Professor Arthur Martell on the occasion of his seventy fifth birthday.

The complexes of In(III) and Ga(III) with a variety of nitrogen donor ligands were studied in aqueous solution by glass electrode potentiometry at 25°C in 0.1 M NaNO₃. The ligands were 2-aminomethylpyri-dine (AMPY), ethylenediamine (EN), N,N,N',N'-tetrakis(2-hydroxypropyl)ethylenediamine (THPED), and N,N-bis(2-hydroxyethyl)glycine (BICIN). A variety of mixed ligand complexes of the MLOH type were detected with many of the above ligands as L. The logK₁ values obtained were with Ga(III) 8.40 (AMPY), 7.94 (THPED) 12.72 (EN), and In(III) 7.6 (AMPY), 8.20 (THPED), and 7.06 (BICIN). These formation constants are discussed in relation to previous predictions that In(III) and Ga(III) would have a substantial chemistry with nitrogen donor ligands. Of particular interest is the Ga(III) system with EN, where a very stable Ga(EN)³⁺ complex is formed, but no higher complexes except for hydrolyzed species such as Ga(EN)OH²⁺ and Ga(EN)(OH)₂ ⁺.     

Structural elucidation of the binding and inhibitory properties of lanthanide (III) ions at the 3'-5' exonucleolytic active site of the Klenow fragment

BACKGROUND: Biochemical and biophysical experiments have shown that two catalytically essential divalent metal ions (termed 'A' and 'B') bind to the 3'-5' exonuclease active site of the Klenow fragment (KF) of Escherichia coli DNA polymerase I. X-ray crystallographic studies have established the normal positions in the KF 3'-5' exonuclease (KF exo) active site of the two cations and the single-stranded DNA substrate. Lanthanide (III) luminescence studies have demonstrated, however, that only a single europium (III) ion (Eu3+) binds to the KF exo active site. Furthermore, Eu3+ does not support catalysis by KF exo or several other two-metal-ion phosphoryl-transfer enzymes. RESULTS: A crystal structure of KF complexed with both Eu3+ and substrate single-stranded oligodeoxynucleotide shows that a lone Eu3+ is bound near to metal-ion site A. Comparison of this structure to a relevant native structure reveals that the bound Eu3+ causes a number of changes to the KF exo active site. The scissile phosphate of the substrate is displaced from its normal position by about 1 A when Eu3+ is bound and the presence of Eu3+ in the active site precludes the binding of the essential metal ion B. CONCLUSIONS: The substantial, lanthanide-induced differences in metal-ion and substrate binding to KF exo account for the inhibition of this enzyme by Eu3+. These changes also explain the inability of KF exo to bind more than one cation in the presence of lanthanides. The mechanistic similarity between KF exo and other two-metal-ion phosphoryl-transfer enzymes suggests that the principles of lanthanide (III) ion binding and inhibition ascertained from this study will probably apply to most members of this class of enzymes.     

Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

Metal ligand-induced alterations in the surface structures of lactoferrin and transferrin probed by interaction with immobilized copper(II) ions

We have evaluated immobilized Cu(II) ions as a potential site-directed molecular probe to monitor ligand-induced alterations in protein surface structures. Metal ion-induced alterations in the surface structures of different lactoferrins (human and porcine), transferrins (human and rabbit), and ovotransferrin (chicken) were examined. Although these 78,000-dalton glycoproteins are related gene products with similar overall structure and function, they differ greatly in the number and distribution of surface-exposed electron-donor groups thought to interact with Cu(II) ions. Each of these proteins interacted with immobilized Cu(II) ions through sites which are distinct from the two specific high affinity metal binding sites identified for iron. In both the presence and absence of bound iron, transferrins interacted more strongly with the immobilized Cu(II) ions than did lactoferrins; ovotransferrin interacted only weakly. Although iron binding increased the affinities of lactoferrins for immobilized Cu(II), iron binding decreased the affinities of transferrins and ovotransferrin for immobilized Cu(II) ions. Iron-saturated and iron-free lactoferrins were resolved by pH gradient elution, but only in the presence of 3 M urea; they were not resolved by imidazole affinity elution. Conversely, the iron-saturated and iron-free forms of transferrin were only separated by imidazole affinity elution. Urea did not influence the resolution of apo and holo ovotransferrins by imidazole. The differential effects of urea and imidazole suggest the participation of different types of surface electron-donor groups. The progressive site-specific modification of surface-exposed histidyl residues by carboxyethylation revealed several lactoferrin forms of intermediate affinity for immobilized iminodiacetate-Cu(II) ions. In summary, independent of species, the affinity for immobilized Cu(II) ions increased as follows: iron-saturated ovotransferrin less than metal-free ovotransferrin less than apolactoferrin less than hololactoferrin much less than diferric or holotransferrin less than monoferric transferrin less than apotransferrin. We have demonstrated the use of immobilized Cu(II) ions to distinguish and to monitor ligand-induced alterations in protein surface structure. The results are discussed in relation to protein surface-exposed areas of electron-donor groups.     

改性氧化石墨烯去除重金属离子的分子动力学模拟

通过硅烷化反应在氧化石墨烯(Graphene oxide, GO) 表面嫁接螯合官能团N-(三甲氧基硅丙烷)乙二胺三酸(EDTA-Si), 得到改性氧化石墨烯(GO-EDTA), 采用分子动力学模拟在分子水平上研究了Pb²⁺在GO-EDTA 表面的动态吸附分布、 构象及动力学性质, 比较了Pb²⁺和单价Na⁺离子在氧化石墨烯上的吸附行为, 模拟了GO-EDTA与Ca²⁺相互作用, 与Pb²⁺的吸附行为进行了对比. 模拟结果表明, Pb²⁺和Na⁺的吸附位点是GO-EDTA 体系中的羧基, 而非氧化石墨烯表面的羟基; Pb²⁺和 Na⁺ 与羧基的吸附构象不同, 前者吸附构象以摩尔比2:1为主, 即两个羧基对一个Pb²⁺离子, 而后者更多倾向于摩尔比1:1的吸附模式, 即一个羧基对一个Na⁺离子; Pb²⁺离子相对于Ca²⁺和Na⁺离子, 形成的COO^--Pb²⁺离子对构象越过的能垒最低, 但是破坏该离子对构象时能垒较高, 表明Pb²⁺离子在氧化石墨烯膜上表现出良好的吸附性.     

Charge transfer and formation of reduced Ce3+ upon adsorption of metal atoms at the ceria (110) surface

The modification of cerium dioxide with nanoscale metal clusters is intensely researched for catalysis applications, with gold, silver, and copper having been particularly well studied. The interaction of the metal cluster with ceria is driven principally by a localised interaction between a small number of metal atoms (as small as one) and the surface and understanding the fundamentals of the interaction of metal atoms with ceria surfaces is therefore of great interest. Much attention has been focused on the interaction of metals with the (111) surface of ceria, since this is the most stable surface and can be grown as films, which are probed experimentally. However, nanostructures exposing other surfaces such as (110) show high activity for reactions including CO oxidation and require further study; these nanostructures could be modified by deposition of metal atoms or small clusters, but there is no information to date on the atomic level details of metal-ceria interactions involving the (110) surface. This paper presents the results of density functional theory (DFT) corrected for on-site Coulomb interactions (DFT+U) calculations of the adsorption of a number of different metal atoms at an extended ceria (110) surface; the metals are Au, Ag, Cu, Al, Ga, In, La, Ce, V, Cr, and Fe. Upon adsorption all metals are oxidised, transferring electron(s) to the surface, resulting in localised surface distortions. The precise details depend on the identity of the metal atom. Au, Ag, Cu each transfer one electron to the surface, reducing one Ce ion to Ce(3+), while of the trivalent metals, Al and La are fully oxidised, but Ga and In are only partially oxidised. Ce and the transition metals are also partially oxidised, with the number of reduced Ce ions possible in this surface no more than three per adsorbed metal atom. The predicted oxidation states of the adsorbed metal atoms should be testable in experiments on ceria nanostructures modified with metal atoms.     

A Direct Carbon-13 and Nitrogen-15 NMR Study of Praseodymium(III)- and Neodymium(III)-Isothiocyanate Complex Formation in Aqueous Solvent Mixtures

Multinuclear magnetic resonance spectroscopic studies of the trivalent lanthanide complexes with isothiocyanate have been completed for the praseodymium(III) and neodymium(III) ions. In water–acetone–Freon mixtures, at temperatures low enough to slow ligand exchange, usually –85 to –125°C for isothiocyanate, separate carbon-13 and nitrogen-15 NMR signals can be observed for free anion and NCS^- in each metal–ion complex. For both metal ions, ¹⁵N NMR signals are observed for four complexes, displaced about +1500 ppm downfield from free NCS^- for Pr³⁺ and about +2000 ppm for Nd³⁺. In the ¹³C NMR spectra, only three peaks are observed for the complexes of both metal anions, with signal overlap obscuring the resonance for the fourth complex. However, the metal ion coordination numbers, obtained by integration of the resonance signals, are comparable in the ¹⁵N and ¹³C spectra, approaching a maximum value of about 3. These spectral data indicate the formation of Ln(NCS)²⁺ through Ln(NCS) ₄ ^1- occurs for both lanthanides in these solvent systems, a result also observed previously for Ce³⁺, Sm³⁺, and Eu³⁺ in our laboratory. Attempts to study these complexes in water–methanol were unsuccessful, due to the inability to achieve low enough temperatures to slow ligand exchange sufficiently. Results for NCS^- and Cl^- competitive-binding studies by ³⁵Cl NMR for both metal ions will also be described.