Preparation and characterization of pure single-phase BiFeO3 nanoparticles through thermal decomposition of the heteronuclear Bi[Fe(CN)6]·5H2O complex

The heteronuclear Bi[Fe(CN)₆]·5H₂O complex was synthesized and single-phase perovskite-type BiFeO₃ nanoparticles with an average size of 30 nm were obtained by its decomposition at 600 °C. The complex and its decomposition products were analyzed using elemental analysis, thermal analysis (TGA/DTA/DSC), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV–Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and magnetic measurements. The magnetic measurement confirms that the product shows a ferromagnetic order at room temperature, which may be ascribed to the size confinement effect. The DTA and DSC results confirm the multiferroic nature of the BiFeO₃ nanoparticles with Neel and Curie points at 372 and 825 °C, respectively. The BiFeO₃ prepared by this method could be an appropriate visible-light photocatalytic material due to its strong absorption band in the visible region. This method is simple, low-cost, safe and also suitable for industrial production of high purity perovskite-type BiFeO₃ nanoparticles for electromagnetic applications.     

Preparation and characterization of NiO nanoparticles from thermal decomposition of the [Ni(en)3](NO3)2 complex: A facile and low-temperature route

NiO nanoparticles with an average size of 15 nm were easily prepared via the thermal decomposition of the tris(ethylenediamine)Ni(II) nitrate complex [Ni(en)₃](NO₃)₂ as a new precursor at low temperature, and the nanoparticles were characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and magnetic measurements. The magnetic measurements confirm that the product shows a ferromagnetic behavior at room temperature, which may be ascribed to a size confinement effect. The NiO nanoparticles prepared by this method could be an appropriate photocatalytic material due to a strong absorption band at 325 nm. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

Structure,optical and magnetic properties of LaFeO3 nanoparticles prepared by polymerized complex method

This work reports the study the structure, optical and magnetic properties of LaFeO₃ nanoparticles synthesized by the polymerized complex method. The LaFeO₃ nanoparticles were successfully obtained from calcination of the precursor at different temperatures from 750 to 1,050 °C in air for 2 h. The calcined LaFeO₃ nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–Visible spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge spectroscopy (XANES) and vibrating sample magnetometry. The XRD and TEM results showed that all LaFeO₃ samples had a single phase nature with the orthorhombic structure. The estimated crystallite sizes were in the range of 44.5 ± 2.4–74.1 ± 4.9 nm. UV–Vis spectra showed strong UV and Vis absorption with small band gap energy. The valence states of Fe ions were in the Fe³⁺ and Fe⁴⁺ state, as confirmed by XPS and XANES results. The weak ferromagnetic behavior with specific saturation magnetization of 0.1 emu/g at 10 kOe was obtained for the small particle of 44.5 ± 2.4 nm. The uncompensated spins at the surface was proposed as playing a part in the magnetic properties of small sized LaFeO₃.     

Solvent-Free Synthesis of ZnO Nanoparticles by a Simple Thermal Decomposition Method

This paper reports on a novel processing route for producing ZnO nanoparticles by solid-state thermal decomposition of zinc(II) acetate nanostructures obtained by the sublimation of zinc(II) acetate powder. The sublimation process of the Zn(OAc)₂ powder was carried out in the temperature 150 °C for 2 h. In addition, nanoparticles of ZnO were obtained by solid-state thermal decomposition of the synthesized Zn(OAc)₂ nanostructures. The synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy, and energy dispersive X-ray spectroscopy. The sublimation process of the Zn(OAc)₂ powder was carried out within the range of 150–180 °C. The XRD studies indicated the production of pure hexagonal ZnO nanoparticles after thermal decomposition.     

Easy Synthesis of Magnetite Nanocrystals via Coprecipitation Method

In this study, magnetite (Fe₃O₄) nanocrystals with a size range of 25 nm were prepared by the facile chemical coprecipitation method by a surfactant-assisted from the solution of FeCl₃.6H₂O salt-solution. In the process, we used octanoic acid as surfactant. In addition, the magnetic hysteresis measured shows that the rods obtained display ferromagnetic properties at room temperature. The samples were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The magnetic property was studied with vibrating sample magnetometer.     

Simple and low-temperature synthesis of NiO nanoparticles through solid-state thermal decomposition of the hexa(ammine)Ni(II) nitrate, [Ni(NH3)6](NO3)2, complex

NiO nanoparticles with an average size of about 12 nm were easily prepared via the thermal decomposition of hexa(ammine)Ni(II) nitrate complex, [Ni(NH₃)₆](NO₃)₂, at low temperature of 250 °C. The product was characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and magnetic measurement. The magnetic measurement revealed a small hysteresis loop at room temperature, confirming a superparamagnetic (weak ferromagnetic) nature of the synthesized NiO nanoparticles. Indeed, the NiO nanoparticles prepared by this method could be an appropriate semiconductor material due to the optical band gap of 3.35 eV which shows a red shift in comparison with the previous reports. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

One-Pot Green Synthesis of Hematite (α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>) Nanoparticles by Ultrasonic Irradiation and Their In Vitro Cytotoxicity on Human Keratinocytes CRL-2310

Greener and ecofriendly approaches to the synthesis of hematite (α-Fe₂O₃) nanoparticles are important for various biomedical applications. The authors describe on a facile, one-pot method for synthesizing hematite nanoparticles (HNPs) using ultrasonic irradiation of iron(III) oxide solution containing the aqueous root extract of Arisaema amurense, which was used as both reducing and stabilizing agents. The synthesized HNPs were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and vibrating sample magnetometry (VSM). FT-IR analysis indicated the presence of stabilizing groups such as hydroxyl (–OH), C–O, and amide (–NH–) on the surfaces of HNPs. TEM analysis revealed the formation of near spherical HNPs of average size 24.55 ± 6.9 nm. VSM confirmed the ferromagnetic nature of the HNPs with a saturation magnetization (Ms) at 1.25 emu/g and remanent magnetization (Mr) at 0.50 emu/g at 301 K. The electrochemical behavior of glassy carbon (GC)/HNPs electrode was studied using cyclic voltammetry (CV). MTT assays of the HNPs exhibited in vitro concentration-dependent cytotoxicity to human keratinocytes CRL-2310, which indicated the synthesized HNPs are compatible with requirements for in vivo biomedical applications at lower concentrations.     

Application of RuO<Subscript>2</Subscript> Nanoparticles as Catalyst in Preparation of Indolo[3,2-a]Carbazoles

RuO₂ nanoparticles were readily prepared from RuCl₃·3H₂O via the formation of Ru-hydroxide precursor, followed by calcination at 550 °C. Under similar conditions, uniform dispersion of spherical RuO₂ nanoparticles over the surface of MCM-41 was also obtained. The synthesized materials were characterized by transmission electron microscopy (TEM), infrared spectroscopy (FT-IR), X-ray diffraction (XRD), BET surface area measurements, and magnetic measurements (VSM). The obtained RuO₂ nanoparticles found application as catalyst in preparation of indolo[3,2-a]carbazoles from the reaction of indoles and benzils. Under mild reaction conditions, satisfactory yields of the desired products were obtained. Stabilization of RuO₂ nanoparticles over the surface of MCM-41 (RuO₂–MCM41), however, had the advantage of easy recycling, although a slight decrease in efficiency after five successive runs was observed.     

Effect of heat treatment on ultrasonic synthesized bismuth ferrites: an effective visible light-driven photocatalyst

Even though it is a potential visible-light responsive photocatalyst, the application of BiFeO₃ (BFO) is restricted because of the presence of residual impurities in the synthesis process. To alleviate this problem, in this work, BiFeO₃ was synthesized by the sonochemical method and calcined at different temperatures. Morphologies and phases of the samples were evaluated by using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) techniques. UV–Vis diffuse reflectance spectroscopy (UV–Vis DRS) was used to analyze the absorption properties. The photocatalytic activities of the samples were evaluated via the photocatalytic degradation of rhodamine-B (RhB) aqueous solution under simulated solar light irradiation. The results revealed that the phase transformation from amorphous to crystalline phase has occurred during heat treatment. The formation of pure BFO occurred only at about 600 °C, indicating the importance of heat treatment during the synthesis process. On the other hand, the decolorization of RhB solution was completed by pure BFO photocatalyst within 1 h of simulated solar light irradiation.     

Synthesis and characterization of sol–gel derived ZrV2O7 fibers with negative thermal expansion property

Novel ZrV₂O₇ fibers with negative thermal expansion were prepared via combination of sol–gel process and thermal decomposition. The as-prepared fibers were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy and Raman spectroscopy. The results showed that the synthetic pH value had little influence on the crystal structure of products while showed significant effect on morphology. The fibers obtained at pH = 9 exhibited cylindrical morphology and its mean diameter was about 1 μm. The thermal expansion property of the as-prepared fibers was investigated by in situ XRD and thermal mechanical analyzer. All of the as-prepared fibers showed positive thermal expansion first and then negative thermal expansion, resulting from a phase transition from 3 × 3 × 3 superstructure to 1 × 1 × 1 cubic structure. The macro thermal expansion coefficients of ZrV₂O₇ ceramic rods increased with decreasing of fiber diameter. The mechanism of the phase transition was also discussed.     

Study of crystallization process of soda lead silicate glasses by thermal and spectroscopic methods

The crystallization process of some glasses in the ternary Na₂O–SiO₂–PbO system with good chemical stability that can be used for waste inertization was studied using X-ray diffraction (XRD), infrared spectroscopy (FT-IR), differential thermal analysis (DTA) and scanning electron microscopy. The parent glasses were characterized by XRD and FT-IR, and their vitreous state was determined. DTA measurements evidenced glass transition (T _g) and crystallization temperatures (T _c). The thermal treatments were conducted at vitreous transition temperature (400 °C) and at highest effect of crystallization (650 °C). XRD evidenced the lead and sodium silicate crystalline phases in samples treated at 650 °C for 12 h. Micrometer crystallites dispersed in the glass matrices have affected the transparence of glasses and made them opaque after treatment at 650 °C. The influence of oxide quantities in compositions on the crystallization tendency was revealed. A PbO higher content than that of SiO₂ as well as lower Na₂O content decreased the tendency of crystallization.     

Solvothermal preparation,and characterization,of Cu–Ag nanoparticles

Cu–Ag nanoparticles have been successfully synthesized by one-pot solvothermal treatment of a mixture of AgNO₃ and Cu(OAc)₂·H₂O in ethylene glycol solution at 180 °C for 10 h. The samples were characterized by UV–visible absorption, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectroscopy, transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The results showed that Cu–Ag nanoparticles and a small amount of phase-separated Cu–Ag alloy nanoparticles with an average diameter of 100 ± 30 nm were synthesized by the solvothermal treatment procedure. The mechanism of formation is discussed.     

ZnO-rich CdS-ZIF-8 catalyst for enhanced visible-light photocatalytic degradation of methylene blue

CdS-ZIF-8 photocatalyst was prepared by introducing a ZnO-rich zeolitic imidazolate framework-8 (ZIF-8) during synthesis of CdS by a facile solvothermal method, using ZnO-rich ZIF-8 and cadmium acetate [Cd(Ac)₂] as support and CdS precursor, respectively. The introduction of ZnO-rich ZIF-8 and the photodegradation performance of the catalyst for methylene blue (MB) organic dye were systemically investigated. The CdS-ZIF-8 catalysts were also characterized using X-ray diffraction analysis, transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy, N₂ adsorption–desorption measurements, Fourier-transform infrared (FT-IR) spectroscopy, ultraviolet–visible (UV–Vis) diffuse reflectance spectroscopy (DRS), and photoluminescence spectroscopy. The results indicated that CdS-ZIF-8 contained ZIF-8, CdS, and ZnO phases. The CdS in CdS-ZIF-8 catalysts exhibited smaller particle size compared with pure CdS. Furthermore, compared with pure CdS, CdS-ZIF-8-30 with introduction of ZnO-rich ZIF-8 exhibited higher surface area (77.3 m²/g) and pore volume (0.103 cm³/g). EDX and FT-IR results suggested that a CdS/ZnO heterostructure was formed, which effectively reduced recombination of photogenerated electron–hole pairs. Radical trapping experimental data and band edge position analysis revealed that Z-scheme behavior also played a role in the system. Relying on the combined effect of their structure, the photodegradation efficiency of all the CdS-ZIF-8 catalysts was obviously superior to that of pure CdS for degradation of MB under visible-light irradiation. Photodegradation results illustrated that CdS-ZIF-8 with introduction of 30 mg ZnO-rich ZIF-8 (denoted as CdS-ZIF-8-30) exhibited optimal photodegradation activity.     

Three-dimensional manganese dioxide-functionalized carbon nanotube electrodes for electrochemical supercapacitors

Three-dimensional manganese dioxide (MnO₂)-functionalized multiwalled carbon nanotube (MWCNT) electrodes have been produced by a simple and scalable thermal decomposition process. The electrodes are prepared by treating planar MWCNT sheets with manganese(II) nitrate (Mn(NO₃)₂) solution and annealing at low temperature (200–300 °C) and ambient pressure. The morphology, chemical composition, and structure of the resulting matrices have been investigated with scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray diffraction. Supercapacitors assembled with three-dimensional electrodes exhibit a 14-fold increase in specific capacitance (C _sp) in comparison to those containing pristine, two-dimensional MWCNT electrodes. C _sp varies linearly with Mn(NO₃)₂ thermal decomposition temperature (from 100 to 61 F/g at 0.2 A/g), a trend that is discussed in the context of nitrate reaction chemistry and MWCNT structure. This efficient and promising approach allows for simultaneous enhancement of electrode–electrolyte contact area and incorporation of redox-based charge storage within electrochemical capacitors.     

Mesoporous titania photocatalyst: effect of relative humidity and aging on the preparation of mesoporous titania and on its photocatalytic activity performance

Mesoporous TiO₂ has been synthesized by the sol–gel method, using a nonionic triblock copolymer P123 as surfactant template under acidic conditions. The as-prepared samples were characterized by thermogravimetry–differential thermal analysis (TG–DTA), nitrogen absorption–desorption (BET), field emission scanning electron microscopy, and transmission electron microscopy. The photocatalytic activity of the mesoporous TiO₂ was evaluated by degradation of methylene blue under high-intensity UV light irradiation; the amount of methylene blue was measured by UV–visible spectroscopy. TG–DTA analysis revealed that the surfactant had been removed partly in as-synthesized samples. BET analysis proved that all the samples retained mesoporosity with a narrow pore-size distribution (4.5–6.3 nm) and high surface area (103–200 m²/g). All calcined mesoporous TiO₂ had high photocatalytic activity in the photodegradation of methylene blue.     

Sol–gel preparation and characterization of Ag and Mg co-doped nano TiO<Subscript>2</Subscript>: efficient photocatalytic degradation of C.I. Acid Red 27

In this study, we successfully prepared pure, mono-doped, and Ag, Mg co-doped TiO₂ nanoparticles using the sol–gel method, with titanium tetraisopropoxide as the Ti source. The prepared samples were characterized by X-ray powder diffraction (XRD), specific surface area and porosity (BET and BJH) measurement, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence, and energy dispersive X-ray spectroscopy techniques. The XRD data showed that the prepared nanoparticles had the same crystals structures as the pure TiO₂. Also, DRS results indicated that the band gap of co-doped photocatalyst was smaller than that of the monometallic and undoped TiO₂ and that there was a shift in the absorption band towards the visible light region. Furthermore, the photocatalytic activity of the prepared catalysts was evaluated by the degradation of C.I. Acid Red 27 in aqueous solution under visible light irradiation. The results showed that Ag (0.08 mol%), Mg (0.2 mol%) co-doped TiO₂ had the highest photoactivity among all samples under visible light. It was concluded that co-doping of the Ag and Mg can significantly improve the photocatalytic activity of the prepared photocatalysts, due to the efficient inhibition of the recombination of photogenerated electron–hole pairs. The optimum calcination temperature and time were 450 °C and 3 h, respectively.     

Thermal stability of amine-functionalized MCM-41 in different atmospheres

In the present work, we report on the thermal stability of NH₂-MCM-41 hybrid material under different atmospheres (nitrogen and air). The thermal stability of this hybrid material is very important because of its common use in catalysis, adsorption, biomedical and biotechnological applications, based on mesoporous and aminopropyl functionalities. Samples were prepared by one pot co-condensation method with different loadings of 3-aminopropyltriethoxysilane (APTES). The thermal stability of hybrid samples (NH₂-MCM-41) heat treated in nitrogen and air at 30–800 °C has been investigated. Samples were synthesized under basic media in the presence of cetyltrimethylammonium bromide (CTABr) as structure-directing agent, tetraethyl orthosilicate as silica source, and APTES as functionalizing agent with molar composition of 0.055 CTABr:045 SiO₂:0.054 APTES:5.32 NH₄OH:14.99 H₂O at 50 °C for 24 h at pH 12.4. The obtained hybrid materials have been characterized by thermogravimetric analysis (TG), derivative thermogravimetric analysis, differential scanning calorimetry, X-ray powder diffraction, Fourier-transform infrared spectroscopy, transmission electron microscopy, and surface area determination by the BET method. Based on TG measurements of the treated samples, it was found out that the thermal stability varied greatly in different atmospheres.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

Sol–gel preparation of pure and doped TiO2 films for the photocatalytic oxidation of ethanol in air

Stable sols of TiO₂ were synthesized by a non-aqueous sol–gel process using titanium (IV) isopropoxide as precursor. The microstructure, optical and morphological properties of the films obtained by spin-coating from the sol, and annealed at different temperatures, were investigated using scanning electron microscopy, transmission electron microscopy, diffuse reflectance spectroscopy and ellipsometry. The crystalline structure of the films was characterized by X-ray diffraction and their photocatalytic activity was evaluated for the oxidation of ethanol in air. The influence of the calcination temperature, pre-heat treatment and the number of layers was studied. Simultaneous thermo-gravimetric and differential thermal analysis measurements were carried out to ascertain the thermal decomposition behavior of the precursors. In order to obtain a higher photoresponse in the visible region, a series of vanadium-, niobium- and tantalum-doped TiO₂ catalysts was synthesized by the same sol–gel method. For V doping two different precursors, a vanadium alkoxide and V₂O₅, were used. The effect on the crystallization and photocatalytic activity of the doped TiO₂ films was investigated. Furthermore, to identify the effective composition of the samples, they were characterized by X-ray photoelectron spectroscopy and the surface area of the powders was measured by N₂ adsorption. The 10 wt.% doped catalysts exhibit high photocatalytic activity under visible light and among them the best performance was obtained for the sample containing Ta as dopant. The crystallite sizes are closely related to the photocatalytic activity.     

Preparation and characterization of multi-walled carbon nanotubes (MWCNTs), functionalized with phosphonic acid (MWCNTs–C–PO3H2) and its application as a novel,efficient, heterogeneous,highly selective and reusable catalyst for acetylation of alcohols,phenols, aromatic amines,and thiols

A novel, efficient, heterogeneous, and reusable multi-walled carbon nanotubes (MWCNTs), functionalized with phosphonic acid (MWCNTs–C–PO₃H₂) has been synthesized. The synthesized CNTs were characterized using some electron microscopic techniques such as scanning electron microscopy (SEM), atomic force microscopy (AFM), Energy dispersive X-ray spectroscopy (EDAX), and also some thermal and spectroscopic methods such as thermogravimetry (TG). The nitrogen adsorption behavior of the MWCNTs–C–PO₃H₂ catalyst was evaluated using the TG instrumentation system at 25 °C. The catalyst was applied successfully for highly efficient and selective acetylation of alcohols, phenols, thiols and aromatic amines with acetic anhydride at room temperature under solvent-free conditions. The reusability of the catalyst was checked and the recovered catalyst was reused for five runs without significant loss in activity.