New Results in the Synthesis of Styrylazulene Derivatives: Application of the ‘Anil synthesis’ to the preparation of azulenes substituted with styryl groups at the seven-membered ring

The synthesis of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes 5 (R=H, MeO, Cl) has been performed by Wittig reaction of 4,6,8-trimethylazulene-1-carbaldehyde ( 1 ) and the corresponding 4-(R-benzyl)(triphenyl)phosphonium chlorides 4 in the presence of EtONa/EtOH in boiling toluene (see Table 1). In the same way, guaiazulene-3-carbaldehyde ( 2 ) as well as dihydrolactaroviolin ( 3 ) yielded with 4a the corresponding styrylazulenes 6 and 7 , respectively (see Table 1). It has been found that 1 and 4b yield, in competition to the Wittig reaction, alkylation products, namely 8 and 9 , respectively (cf. Scheme 1). The reaction of 4,6,8-trimethylazulene ( 10 ) with 4b in toluene showed that azulenes can, indeed, be easily alkylated with the phosphonium salt 4b . 4,6,8-Trimethylazulene-2-carbaldehyde ( 12 ) has been synthesized from the corresponding carboxylate 15 by a reduction (LiAlH₄) and dehydrogenation (MnO₂) sequence (see Scheme 2). The Swern oxidation of the intermediate 2-(hydroxymethyl)azulene 16 yielded only 1,3-dichloroazulene derivatives (cf. Scheme 2). The Wittig reaction of 12 with 4a and 4b in the presence of EtONa/EtOH in toluene yielded the expected 2-styryl derivatives 19a and 19b , respectively (see Scheme 3). Again, the yield of 19b was reduced by a competing alkylation reaction of 19b with 4b which led to the formation of the 1-benzylated product 20 (see Scheme 3). The ‘anil synthesis’ of guaiazulene ( 21 ) and the 4-R-benzanils 22 (R=H, MeO, Cl, Me₂N) proceeded smoothyl under standard conditions (powered KOH in DMF) to yield the corresponding 4-[(E)-styryl]azulene derivatives 23 (see Table 4). In minor amounts, bis(azulen-4-yl) compounds of type 24 and 25 were also formed (see Table 4). The ‘anil reaction’ of 21 and 4-NO₂C₆H₄CH=NC₆H₅ ( 22e ) in DMF yielded no corresponding styrylazulene derivative 23e . Instead, (E)-1,2-bis(7-isopropyl-1-methylazulen-4-yl)ethene ( 27 ) was formed (see Scheme 4). The reaction of 4,6,8-trimethylazulene ( 10 ) and benzanil ( 22a ) in the presence of KOH in DMF yielded the benzanil adducts 28 to 31 (cf. Scheme 5). Their direct base-catalyzed transformation into the corresponding styryl-substituted azulenes could not be realized (cf. Scheme 6). However, the transformation succeeded smoothly with KOH in boiling EtOH after N-methylation (cf. Scheme 6).     

Reaction of Hydroxymethyl- and Alkyl-Substituted Azulenes with Manganese Dioxide

It is shown that the 2-(hydroxymethyl)-1-methylazulenes 6 are being oxidized by activated MnO₂ in CH₂Cl₂ at room temperature to the corresponding azulene-1,2-dicarbaldehydes 7 (Scheme 2). Extension of the MnO₂ oxidation reaction to 1-methyl- and/or 3-methyl-substituted azulenes led to the formation of the corresponding azulene-1-carbaldehydes in excellent yields (Scheme 3). The reaction of unsymmetrically substituted 1,3-dimethyl-azulenes (cf. 15 in Scheme 4) with MnO₂ shows only little chemoselectivity. However, the observed ratio of the formed constitutionally isometric azulene-1-carbaldehydes is in agreement with the size of the orbital coefficients in the HOMO of the azulenes. The reaction of guaiazulene ( 18 ) with MnO₂ in dioxane/H₂O at room temperature gave mainly the expected carbaldehyde 19 . However, it was accompanied by the azulene-diones 20 and 21 (Scheme 5). The precursor of the demethylated compound 20 is the carbaldehyde 19 . Similarly, the MnO₂ reaction of 7-isopropyl-4-methyalazulene ( 22 ) as well as of 4,6,8-trimethylazulene ( 24 ) led to the formation of a mixture of the corresponding azulene-1,5-diones and azulene-1,7-diones 20 / 23 and 25 / 26 , respectively, in decent yields (Schemes 6 and 7). No MnO₂ reaction was observed with 5,7-dimethylazulene.     

Radical Arylation Reactions of 4, 6, 8-Trimethylazulene

The synthesis of 1- and 2-aryl-substituted (aryl = Ph, 4-NO₂? C₆H₄, and 4-MeO? C₆H₄) 4, 6, 8-trimethylazulenes ( 4 and 3 , respectively) in moderate yields by direct arylation of 4, 6, 8-trimethylazulene ( 8 ) with the corresponding arylhydrazines 13 in the presence of Cu^IIions in pyridine (see Scheme 4) as well as with 4-MeO? C₆H₄Pb(OAc)₃ ( 16 ) in CF₃COOH (see Scheme 5) is described. With 13 , also small amounts of 1, 2- and 1, 3-diarylated azulenes (see 14 and 15 , respectively, in Scheme 4) are formed. The 4-methoxyphenylation of 8 with 16 yielded also the 1, 1′-biazulene 17 in minor amounts (see Scheme 5). 4, 6, 8-Trimethyl-2-phenylazulene ( 3a ) was also obtained as the sole product in moderate yields by the reaction of sodium phenylclopentadienide ( 1a ) with 2, 4, 6-trimethylpyrylium tetrafluoroborate ( 2 ) in THF (Scheme 1). The attempted phenylation of 8 as well as of azulene ( 9 ) itself with N-nitroso-N-phenylacetamide ( 10 ) led only to the formation of the corresponding 1-(phenylazo)-substituted azulenes 12 and 11 , respectively (Scheme 3).     

Thermal and Ru-catalyzed Reactions of Styryl-Substituted Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of 1-[(E)-styrl]azulenes with dimethyl acetylenedicarboxylate (ADM) in decalin at 190–200° does not lead to the formation fo the corresponding heptalene-1,2-dicarboxylates (Scheme 2). Main products are the corresponding azulene-1,2-dicarboxylates (see 4 and 9 ), accompanied by the benzanellated azulenes trans- 10a and trans- 11 , respectively. The latter compounds are formed by a Diels-Alder reaction of the starting azulenes and ADM, followed by an ene reaction with ADM (cf. Scheme 3). The [RuH₂(PPh₃)₄]-catalyzed reaction of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes (R=H, MeO, Cl; Scheme 4) with ADM in MeCN at 110° yields again the azulene-1,2-dicarboxylates as main products. However, in this case, the corresponding heptalene-1,2-dicarboxylates are also formed in small amounts (3–5%; Scheme 4). The benzanellated azulenes trans- 10a and trans- 10b are also found in small amounts (2–3%) in the reaction mixture. ADM Addition products at C(3) of the azulene ring as well as at C(2) of the styryl moiety are also observed in minor amounts (1–3%). Similar results are obtained in the [RuH₂(PPh₃)₄]-catalyzed reaction of 3-[(E)-styryl]guaiazulene ((E)- 8 ; Scheme 5) with ADM in MeCN. However, in this case, no heptalene formation is observed, and the amount of the ADM-addition products at C(2) of the styryl group is remarkably increased (29%). That the substitutent pattern at the seven-membered ring of (E)- 8 is not responsible for the failure of heptalene formation is demonstrated by the Ru-catalyzed reaction of 7-isopropyl-4-methyl-1-[(E)-styryl]azulene ((E)- 23 ; Scheme 11) with ADM in MeCN, yielding the corresponding heptalene-1,2-dicarboxylate (E)- 26 (10%). Again, the main product is the corresponding azulene-1,2-dicarboxylate 25 (20%). Reaction of 4,6,8-trimethyl-2-[(E)-styryl]azulene ((E)- 27 ; Scheme 12) and ADM yields the heptalene-dicarboxylates (E)- 30A / B , purely thermally in decalin (28%) as well as Ru-catalyzed in MeCN (40%). Whereas only small amounts of the azulene-1,2-dicarboxylate 8 (1 and 5%, respectively) are formed, the corresponding benzanellated azulene trans- 29 ist found to be the second main product (21 and 10%, respectively) under both reaction conditions. The thermal reaction yields also the benzanellated azulene 28 which is not found in the catalyzed variant of the reaction. Heptalene-1,2-dicarboxylates are also formed from 4-[(E)-styryl]azulenes (e.g. (E)- 33 and (E)- 34 ; Scheme 14) and ADM at 180–190° in decalin and at 110° in MeCN by [RuH₂(PPh₃)₄] catalysis. The yields (30%) are much better in the catalyzed reaction. The formation of by-products (e.g. 39–41 ; Scheme 14) in small amounts (0.5–5%) in the Ru-catalyzed reactions allows to understand better the reactivity of zwitterions (e.g. 42 ) and their triyclic follow-up products (e.g. 43 ) built from azulenes and ADM (cf. Scheme 15).     

Ru-Catalyzed Heptalene Formation from Azulenes and Dimethyl Acetylenedicarboxylate

It is shown that azulenes react with dimethyl acetylenedicarboxylate (ADM) in solvents such as toluene, dioxan, or MeCN in the presence of 2 mol-% [RuH₂(PPh₃)₄] already at temperatures as low as 100° and lead to the formation of the corresponding heptalene-1,2-dicarboxylates in excellent yields (Tables 1 and 2). The Ru-catalyzed reaction of ADM with 1-(tert-butyl)-4,6,8-trimethylazulene ( 31 ) takes place even at room temperature, yielding the primary tricyclic addition product 32 and its thermal retro-Diels-Alder product dimethyl 4,6,8-trimethylazulene-1,2-dicarboxylate ( 21 ; Scheme 4). At 100° in MeCN, 32 yields 90% of 21 and only 10% of the corresponding heptalene. These observations demonstrate that [RuH₂(PPh₃)₄] catalyzes the first step of the thermal formation of heptalenes from azulenes and ADM which occurs in apolar solvents such as tetralin or decalin at temperatures > 180° (cf. Scheme 1).     

Synthesis of 1‐Methyl‐6,10‐diphenylheptalene Derivatives

The reduction of heptalene diester 1 with diisobutylaluminium hydride (DIBAH) in THF gave a mixture of heptalene‐1,2‐dimethanol 2a and its double‐bond‐shift (DBS) isomer 2b (Scheme 3). Both products can be isolated by column chromatography on silica gel. The subsequent chlorination of 2a or 2b with PCl₅ in CH₂Cl₂ led to a mixture of 1,2‐bis(chloromethyl)heptalene 3a and its DBS isomer 3b . After a prolonged chromatographic separation, both products 3a and 3b were obtained in pure form. They crystallized smoothly from hexane/Et₂O 7 : 1 at low temperature, and their structures were determined by X‐ray crystal‐structure analysis (Figs. 1 and 2). The nucleophilic exchange of the Cl substituents of 3a or 3b by diphenylphosphino groups was easily achieved with excess of (diphenylphospino)lithium (=lithium diphenylphosphanide) in THF at 0° (Scheme 4). However, the purification of 4a / 4b was very difficult since these bis‐phosphines decomposed on column chromatography on silica gel and were converted mostly by oxidation by air to bis(phosphine oxides) 5a and 5b . Both 5a and 5b were also obtained in pure form by reaction of 3a or 3b with (diphenylphosphinyl)lithium (=lithium oxidodiphenylphospanide) in THF, followed by column chromatography on silica gel with Et₂O. Carboxaldehydes 7a and 7b were synthesized by a disproportionation reaction of the dimethanol mixture 2a / 2b with catalytic amounts of TsOH. The subsequent decarbonylation of both carboxaldehydes with tris(triphenylphosphine)rhodium(1+) chloride yielded heptalene 8 in a quantitative yield. The reaction of a thermal‐equilibrium mixture 3a / 3b with the borane adduct of (diphenylphosphino)lithium in THF at 0° gave 6a and 6b in yields of 5 and 15%, respectively (Scheme 4). However, heating 6a or 6b in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) in toluene, generated both bis‐phosphine 4a and its DBS isomer 4b which could not be separated. The attempt at a conversion of 3a or 3b into bis‐phosphines 4a or 4b by treatment with t‐BuLi and Ph₂PCl also failed completely. Thus, we returned to investigate the antipodes of the dimethanols 2a, 2b , and of 8 that can be separated on an HPLC Chiralcel‐OD column. The CD spectra of optically pure (M)‐ and (P)‐configurated heptalenes 2a, 2b , and 8 were measured (Figs. 4, 5, and 9).     

Formation of 6‐Methyl‐7,11‐diphenylheptaleno[1,2‐c]furanones

The dehydrogenation reaction of a mixture of heptalene‐1,2‐ and heptalene‐4,5‐dimethanols 4a and 4b with basic MnO₂ in AcOEt at room temperature led to the formation of the corresponding heptaleno[1,2‐c]furan‐1‐one 6a and heptaleno[1,2‐c]furan‐3‐one 7a (Scheme 2). Both products can be isolated by chromatography on silica gel. The methylenation of the furan‐3‐one 7a with 1 mol‐equiv. of Tebbe's reagent at ?25 to ?30° afforded the 2‐isopropenyl‐5‐methylheptalene‐1‐methanol 9a , instead of the expected 3,6‐dimethylheptaleno[1,2‐c]furan 8 (Scheme 3). Also, the treatment of 7a with Takai's reagent did not lead to the formation of 8 . On standing in solution at room temperature, or more rapidly on heating at 60°, heptalene 9a undergoes a reversible double‐bond shift (DBS) to 9b with an equilibrium ratio of 1 : 1.     

Surprising Formation of Highly Substituted Azulenes on Thermolysis of 4,5,6,7,8‐Pentamethyl‐2H‐cyclohepta[b]furan‐2‐one and Heptalene Formation with the New Azulenes

Heating of 4,5,6,7,8‐pentamethyl‐2H‐cyclohepta[b]furan‐2‐one ( 1a ) in decalin at temperatures >170° leads to the development of a blue color, typical for azulenes. It belongs, indeed, to two formed azulenes, namely 4,5,6,7,8‐pentamethyl‐2‐(2,3,4,5,6‐pentamethylphenyl)azulene ( 4a ) and 4,5,6,7,8‐pentamethylazulene ( 5a ) (cf. Scheme 2 and Table 1). As a third product, 4,5,6,7‐tetramethyl‐2‐(2,3,4,5,6‐pentamethylphenyl)‐1H‐indene ( 6a ) is also found in the reaction mixture. Neither 4,6,8‐trimethyl‐2H‐cyclohepta[b]furan‐2‐one ( 1b ) nor 2H‐cyclohepta[b]furan‐2‐one ( 1c ) exhibit, on heating, such reactivity. However, heating of mixtures 1a / 1b or 1a / 1c results in the formation of crossed azulenes, namely 4,6,8‐trimethyl‐2‐(2,3,4,5,6‐pentamethylphenyl)azulene ( 4ba ) and 2‐(2,3,4,5,6‐pentamethylphenyl)azulene ( 4ca ), respectively (cf. Scheme 3). The formation of small amounts of 4,6,8‐trimethylazulene ( 5ba ) and azulene ( 5ca ), respectively, besides 1H‐indene 6a is also observed. The observed product types speak for an [8+2]‐cycloaddition reaction between two molecules of 1a or between 1b and 1c , respectively, with 1a , whereby 1a plays in the latter two cases the part of the two‐atom component (cf. Figs. 5 – 7 and Schemes 4 – 6). Strain release, due to the five adjacent Me groups in 1a , in the [8+2]‐cycloaddition step seems to be the driving force for these transformations (cf. Table 3), which are further promoted by the consecutive loss of two molecules of CO₂ and concomitant formation of the 10π‐electron system of the azulenes. The new azulenes react with dimethyl acetylenedicarboxylate (ADM) to form the corresponding dimethyl heptalene‐4,5‐dicarboxylates 20 , 22 , and 24 (cf. Scheme 7), which give thermally or photochemically the corresponding double‐bond‐shifted (DBS) isomers 20′ , 22′ , and 24′ , respectively. The five adjacent Me groups in 20 / 20′ and 24 / 24′ exert a certain buttressing effect, whereby their thermal DBS process is distinctly retarded in comparison to 22 / 22′ , which carry `isolated' Me groups at C(6), C(8), and C(10). This view is supported by X‐ray crystal‐structure analyses of 22 and 24 (cf. Fig. 8 and Table 5).     

Reaktion von 3-(Dimethylamino)-2H-azirinen mit 1,3-Thiazolidin-2-thion

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Thiazolidine-2-thione Reaction of 3-(dimethylamino)-2H-azirines 1 and 1,3-thiazolidine-2-thione ( 6 ) in MeCN at room temperature leads to a mixture of perhydroimidazo[4,3-b]thiazole-5-thiones 7 and N-[1-(4,5-dihydro-1,3-thiazol-2-yl)alkyl]-N′,N′-dimethylthioureas 8 (Scheme 2), whereas, in i-PrOH at ca. 60°, 8 is the only product (Scheme 4). It has been shown that, in polar solvents or under Me₂NH catalysis, the primarily formed 7 isomerizes to 8 (Scheme 4). The hydrolysis of 7 and 8 leads to the same 2-thiohydantoine 9 (Scheme 3 and 5). The structure of 7a, 8c , and 9b has been established by X-ray crystallography (Chapt. 4). Reaction mechanisms for the formation and the hydrolysis of 7 and 8 are suggested.     

Synthese von Trifluoromethyl-substituierten Schwefel-Heterocyclen unter Verwendung von 3,3,3-Trifluorobrenztraubensäure-Derivaten

Synthesis of Trifluoromethyl-Substituted Sulfur Heterocycles Using 3,3,3-Trifluoropyruvic-Acid Derivatives The reaction of methyl 3,3,3-trifluoropyruvate ( 1 ) with 2,5-dihydro-1,3,4-thiadiazoles 4a, b in benzene at 45° yielded the corresponding methyl 5-(trifluoromethyl)-1,3-oxathiolane-5-carboxylates 5a, b (Scheme 1) via a regioselective 1,3-dipolar cycloaddition of an intermediate ‘thiocarbonyl ylide’ of type 3 . With methyl pyruvate, 4a reacted similarly to give 6 in good yield. Methyl 2-diazo-3,3,3-trifluoropropanoate ( 2 ) and thiobenzophenone ( 7a ) in toluene underwent a reaction at 50°; the only product detected in the reaction mixture was thiirane 8a (Scheme 2). With the less reactive thiocarbonyl compounds 9H-xanthene-9-thione ( 7b ) and 9H-thioxanthene-9-thione ( 7c ) as well as with 1,3-thiazole-5(4H)-thione 12 , diazo compound 2 reacted only in the presence of catalytic amounts of Rh₂(OAc)₄. In the cases of 7a and 7b , thiiranes 8b and 8c , respectively, were the sole products (Scheme 3). The crystal struture of 8c has been established by X-ray crystallography (Fig.). In the reaction with 12 , desulfurization of the primarily formed thiirane 14 gave the methyl 3,3,3-trifluoro-2-(4,5-dihydro-1,3-thiazol-5-ylidene)propanoates (E)-and (Z)- 15 (Scheme 4). A mechanism of the Rh-catalyzed reaction via a carbene addition to the thiocarbonyl S-atom is proposed in Scheme 5.     

Carbenoid Reactions of Dimethyl Diazomalonate with Aromatic Thioketones and 1,3-Thiazole-5(4H)-thiones

Dimethyl diazomalonate ( 4 ) and thiobenzophenone ( 2a ) do not react in toluene even after warming to 50°. After addition of catalytic amounts of Rh₂(OAc)₄, a smooth reaction under N₂ evolution afforded a mixture of thiiranedicarboxylate 5 and (diphenylmethylidene)malonate 6 (Scheme 2). A reaction mechanism via an intermediate ‘thiocarbonyl ylide’ 7 , formed by the addition of the carbenoid species 8 to the S-atom of 2a , is plausible. Similar reactions were carried out with 9H-xanthene-9-thione ( 2b ), 9H-thioxanthene-9-thione ( 2c , Scheme 4), and 1,3-thiazole-5(4H)-thione 18 (Scheme 6). In the cases of 2b and 2c , spirocyclic 1,3-dithiolanetetracarboxylates 14a and 14b , respectively, were obtained as the third product. Reaction mechanisms for their formation are proposed in Scheme 5: S-transfer from intermediate thiirane 12 to the carbenoid species yielded thioxomalonate 15 which underwent a 1,3-dipolar cycloaddition with ‘thiocarbonyl ylide’ 16 . An alternative is the formation of ‘thiocarbonyl ylide’ 17 via carbene addition to 15 , followed by 1,3-dipolar cycloaddition with 2b and 2c , respectively.     

Umsetzung von Diazoessigsäure-ethylester mit 1,3-Thiazol-5(4H)-thionen

Reaction of Ethyl Diazoacetate with 1,3-Thiazole-5(4H)-thiones Reaction of ethyl diazoacetate ( 2a ) and 1,3-thiazole-5(4H)-thiones 1a,b in Et₂O at room temperature leads to a complex mixture of the products 5–9 (Scheme 2). Without solvent, 1a and 2a react to give 10a in addition to 5a–9a . In Et₂O in the presence of aniline, reaction of 1a,b with 2a affords the ethyl 1,3,4-thiadiazole-2-carboxylate 10a and 10b , respectively, as major products. The structures of the unexpected products 6a, 7a , and 10a have been established by X-ray crystallography. Ethyl 4H-1,3-thiazine-carboxylate 8b was transformed into ethyl 7H-thieno[2,3-e][1,3]thiazine-carboxylate 11 (Scheme 3) by treatment with aqueous NaOH or during chromatography. The structure of the latter has also been established by X-ray crystallography. In the presence of thiols and alcohols, the reaction of 1a and 2a yields mainly adducts of type 12 (Scheme 4), compounds 5a,7a , and 9a being by-products (Table 1). Reaction mechanisms for the formation of the isolated products are delineated in Schemes 4–7: the primary cycloadduct 3 of the diazo compound and the C?S bond of 1 undergoes a base-catalyzed ring opening of the 1,3-thiazole-ring to give 10 . In the absence of a base, elimination of N₂ yields the thiocarbonyl ylide A ′, which is trapped by nucleophiles to give 12 . Trapping of A ′, by H₂O yields 1,3-thiazole-5(4H)-one 9 and ethyl mercaptoacetate, which is also a trapping agent for A ′, yielding the diester 7 . The formation of products 6 and 8 can be explained again via trapping of thiocarbonyl ylide A ′, either by thiirane C (Scheme 6) or by 2a (Scheme 7). The latter adduct F yields 8 via a Demjanoff-Tiffeneau-type ring expansion of a 1,3-thiazole to give the 1,3-thiazine.     

Reaction of 3-Amino-2H-azirines with 2-Amino-4,6-dinitrophenol (Picramic Acid): Synthesis of Quinazoline- and 1,3-Benzoxazole Derivatives

The reaction of 3-(dimethylamino)-2H-azirines 1a–c and 2-amino-4,6-dinitrophenol (picramic acid, 2 ) in MeCN at 0° to room temperature leads to a mixture of the corresponding 1,2,3,4-tetrahydroquinazoline-2-one 5 , 3-(dimethylamino)-1,2-dihydroquinazoline 6 , 2-(1-aminoalkyl)-1,3-benzoxazole 7 , and N-[2-(dimethylamino)phenyl]-α-aminocarboxamide 8 (Scheme 3). Under the same conditions, 3-(N-methyl-N-phenyl-amino)-2H-azirines 1d and 1e react with 2 to give exclusively the 1,3-benzoxazole derivative 7 . The structure of the products has been established by X-ray crystallography. Two different reaction mechanisms for the formation of 7 are discussed in Scheme 6. Treatment of 7 with phenyl isocyanate, 4-nitrobenzoyl chloride, tosyl chloride, and HCl leads to a derivatization of the NH₂-group of 7 (Scheme 4). With NaOH or NaOMe as well as with morpholine, 7 is transformed into quinazoline derivatives 5 , 14 , and 15 , respectively, via ring expansion (Scheme 5). In case of the reaction with morpholine, a second product 16 , corresponding to structure 8 , is isolated. With these results, the reaction of 1 and 2 is interpreted as the primary formation of 7 , which, under the reaction conditions, reacts with Me₂NH to yield the secondary products 5 , 6 , and 8 (Scheme 7).     

Tetramethylheptalenes and Their Tricarbonylchromium Complexes: Synthesis,Structures, and Thermal Rearrangements

The thermal 4 : 1 equilibrium mixture of 1,3,5,6- and 1,3,5,10-tetramethylheptalene ( 13a and 13b , resp.) has been prepared, starting from the thermal equilibrium mixture of dimethyl 6,8,10-trimethylheptalene-1,2- and -4,5-dicarboxylate ( 6a and 6b , resp.; cf. Scheme 5). These heptalenes undergo double-bond shifts (DBS) even at ambient temperature. Treatment of the mixture 13a / 13b 4 : 1 with [Cr(CO)₃(NH₃)₃] in boiling 1,2-dimethoxyethane resulted in the formation of all four possible mononuclear Cr(CO)₃ complexes 19a – 19d of 13a and 13b , as well as two binuclear Cr(CO)₃ complexes 20a and 20b , respectively, in a total yield of 87% (cf. Scheme 7). The mixture of complexes was separated by column chromatography, followed by preparative HPLC (cf. Fig. 2). The structures of all complexes were established by X-ray crystal-structure analyses (complex 19b and 20b ; cf. Figs. 6 – 8) and extensive ¹H-NMR measurements (cf. Table 3). In 20b , the two Cr(CO)₃ groups are linked in a `syn'-mode to the highly twisted heptalene π-skeleton. The correspondence of the <sup>1</sup>H-NMR data of 20a with that of 20b indicates that the two Cr(CO)<sub>3</sub> groups in 20a also have a `syn'-arrangement. The thermal behavior of the mononuclear complexes 19a – 19d has been studied at 85° in hexafluorobenzene (HFB). At this temperature, all four complexes undergo rearrangement to the same thermal equilibrium mixture (cf. Table 8). The rates for the thermal equilibration of each complex have been determined by ¹H-NMR measurements (cf. Figs. 9 – 12) and analyzed by seven different kinetic schemes (Chapt. 2). The equilibration rates are in agreement with two different haptotropic rearrangements that take place, namely intra- and inter-ring shifts of the Cr(CO)₃ group, whereby both rearrangements are accompanied by DBS of the heptalene π-skeleton (cf. Scheme 9). All individual kinetic steps possess similar ΔG^≠ values in the range of 29 – 31 kcal⋅mol⁻¹ (cf. Table 8). The occurrence of inter-ring haptotropic migrations of Cr(CO)₃ groups has already been established for anellated aromatic systems (cf. Scheme 10); however, it is the first time that these rearrangements have been unequivocally demonstrated for Cr(CO)₃ complexes of non-planar bicyclic [4n]annulenes, such as heptalenes. The mechanism of migration may be similar to that proposed for aromatic systems (cf. Schemes 10 and 11).     

Some Unusual Products from the Thermal Reaction of Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of azulene-1-carbaldehydes 5 and 6 with excess dimethyl acetylenedicarboxylate (ADM) in decalin leads mainly to the formation of (1 + 1) and (1 + 2) adducts arising from the addition of ADM at the seven-membered ring of the azulenes (cf. Schemes 2 and 4). The (1 + 2) adducts are formed in a homo-Diels-Alder reaction of ADM and isomeric tricyclic carbaldehydes which are derived from the primary tricyclic carbaldehydes by reversible [1s5s]-C shifts (cf. Schemes 3 and 5). The thus formed pentacyclic carbaldehydes seem to undergo deep-seated skeletal rearrangements (cf. Scheme 7) which result finally in the formation of the formyl-tetrahydrocyclopenta[bc]acenaphthylene-tetraesters 12 and 19 , respectively. In other cases, e.g., azulene-1-carbaldehydes 7 and 8 (cf. Scheme 8), the thermal reaction with excess ADM furnishes only the already known tetracycfic (1 + 2) adducts of type anti- 26 to ‘anti’- 29 . The thermal reaction of 1,3,4,8-tetramethylazulene ( 9 ) with excess ADM in decalin resulted in the formation of two (1 + 2) and one (1 + 3) adduct in low yields (cf. Scheme 9). The latter turned out to be the 2,6-bridged barrelene derivative 32 . There are structural evidences that 32 is formed by similar pathways as the formyl-tetrahydrocyclopenta[bc]acenaphthylene-tetraesters (cf. Schemes 7 and 11). [²H₃]Me-Labelling experiments are in agreement with the proposed mechanisms (cf. Scheme 13).     

Exceptional Products of the Desulfurization of N,2-Diaryl-5-(arylimino)- 2,5-dihydro-4-nitroisothiazol-3-amines

The desulfurization of several N,2-diaryl-5-(arylimino)-2,5-dihydro-4-nitroisothiazol-3-amines 5 with Ph₃P led to complex mixtures of products in low yields. For instance, quinoxaline-2-carboxamide 1-oxides of type 6 (Scheme 2) and, in some cases, also 3-nitroquinolines of type 7 (Scheme 5) were isolated. By the desulfurization of the substituted derivatives 5b – e , a rearrangement of the intermediates yielded 6 and 7 with a different substitution pattern from that expected from the starting materials (Scheme 3). The additional formation of two isomeric 1,2,5-oxadiazole-3-carboxamides 8 was observed only in the case of 5d (R¹=R²=F) (Scheme 6). Under the same reaction conditions, the major product of the desulfurization of 5c was the quinoxaline-2-carboxamide 1-oxide 9 (Scheme 7). Reaction mechanisms involving intermediate ketene imines and O transfer from the NO₂ group to the neighboring ketene imine are proposed. The structures of 6a , 6e , 6k , 7b , and 8d were established by X-ray crystallography, while the structure of 9 was elucidated by 2D-NMR spectroscopy and corroborated by X-ray crystallography.     

Formation of Heptaleno[1,2-c]furans and Heptaleno[1,2-c]furanones

The dehydrogenation reaction of the heptalene-4,5-dimethanols 4a and 4d , which do not undergo the double-bond-shift (DBS) process at ambient temperature, with basic MnO₂ in CH₂Cl₂ at room temperature, leads to the formation of the corresponding heptaleno[1,2-c]furans 6a and 6d , respectively, as well as to the corresponding heptaleno[1,2-c]furan-3-ones 7a and 7d , respectively (cf. Scheme 2 and 8). The formation of both product types necessarily involves a DBS process (cf. Scheme 7). The dehydrogenation reaction of the DBS isomer of 4a , i.e., 5a , with MnO₂ in CH₂Cl₂ at room temperature results, in addition to 6a and 7a , in the formation of the heptaleno[1,2-c]-furan-1-one 8a and, in small amounts, of the heptalene-4,5-dicarbaldehyde 9a (cf. Scheme 3). The benzo[a]heptalene-6,7-dimethanol 4c with a fixed position of the C?C bonds of the heptalene skeleton, on dehydrogenation with MnO₂ in CH₂Cl₂, gives only the corresponding furanone 11b (Scheme 4). By [²H₂]-labelling of the methanol function at C(7), it could be shown that the furanone formation takes place at the stage of the corresponding lactol [3-²H₂]- 15b (cf. Scheme 6). Heptalene-1,2-dimethanols 4c and 4e , which are, at room temperature, in thermal equilibrium with their corresponding DBS forms 5c and 5e , respectively, are dehydrogenated by MnO₂ in CH₂Cl₂ to give the corresponding heptaleno[1,2-c]furans 6c and 6e as well as the heptaleno[1,2-c]furan-3-ones 7c and 7e and, again, in small amounts, the heptaleno[1,2-c]furan-1-ones 8c and 8e , respectively (cf. Scheme 8). Therefore, it seems that the heptalene-1,2-dimethanols are responsible for the formation of the furan-1-ones (cf. Scheme 7). The methylenation of the furan-3-ones 7a and 7e with Tebbe's reagent leads to the formation of the 3-methyl-substituted heptaleno[1,2-c]furans 23a and 23e , respectively (cf. Scheme 9). The heptaleno[1,2-c]furans 6a, 6d , and 23a can be resolved into their antipodes on a Chiralcel OD column. The (P)-configuration is assigned to the heptaleno[1,2-c]furans showing a negative Cotton effect at ca. 320 nm in the CD spectrum in hexane (cf. Figs. 3–5 as well as Table 7). The (P)-configuration of (–)- 6a is correlated with the established (P)-configuration of the dimethanol (–)- 5a via dehydrogenation with MnO₂. The degree of twisting of the heptalene skeleton of 6 and 23 is determined by the Me-substitution pattern (cf. Table 9). The larger the heptalene gauche torsion angles are, the more hypsochromically shifted is the heptalene absorption band above 300 nm (cf. Table 7 and 8, as well as Figs. 6–9).     

1,3-Oxathiole and Thiirane Derivatives from the Reactions of Azibenzil and α-diazo amides with thiocarbonyl compounds

The reactions of α-diazo ketones 1a,b with 9H-fluorene-9-thione ( 2f ) in THF at room temperature yielded the symmetrical 1,3-dithiolanes 7a,b , whereas 1b and 2,2,4,4-tetramethylcyclobutane-1,3-dithione ( 2d ) in THF at 60° led to a mixture of two stereoisomeric 1,3-oxathiole derivatives cis- and trans- 9a (Scheme 2). With 2-diazo-1,2-diphenylethanone ( 1c ), thio ketones 2a–d as well as 1,3-thiazole-5(4H)-thione 2g reacted to give 1,3-oxathiole derivatives exclusively (Schemes 3 and 4). As the reactions with 1c were more sluggish than those with 1a,b , they were catalyzed either by the addition of LiClO₄ or by Rh₂(OAc)₄. In the case of 2d in THF/LiClO₄ at room temperature, a mixture of the monoadduct 4d and the stereoisomeric bis-adducts cis- and trans- 9b was formed. Monoadduct 4d could be transformed to cis- and trans- 9b by treatment with 1c in the presence of Rh₂(OAc)₄ (Scheme 4). Xanthione ( 2e ) and 1c in THF at room temperature reacted only when catalyzed with Rh₂(OAc)₄, and, in contrast to the previous reactions, the benzoyl-substituted thiirane derivative 5a was the sole product (Scheme 4). Both types of reaction were observed with α-diazo amides 1d,e (Schemes 5–7). It is worth mentioning that formation of 1,3-oxathiole or thiirane is not only dependent on the type of the carbonyl compound 2 but also on the α-diazo amide. In the case of 1d and thioxocyclobutanone 2c in THF at room temperature, the primary cycloadduct 12 was the main product. Heating the mixture to 60°, 1,3-oxathiole 10d as well as the spirocyclic thiirane-carboxamide 11b were formed. Thiirane-carboxamides 11d–g were desulfurized with (Me₂N)₃P in THF at 60°, yielding the corresponding acrylamide derivatives (Scheme 7). All reactions are rationalized by a mechanism via initial formation of acyl-substituted thiocarbonyl ylides which undergo either a 1,5-dipolar electrocyclization to give 1,3-oxathiole derivatives or a 1,3-dipolar electrocyclization to yield thiiranes. Only in the case of the most reactive 9H-fluorene-9-thione ( 2f ) is the thiocarbonyl ylide trapped by a second molecule of 2f to give 1,3-dithiolane derivatives by a 1,3-dipolar cycloaddition.     

A Detailed Investigation of the Reaction of 5,9-Diphenylbenz[a]azulene with Dialkyl Acetylenedicarboxylates Leading to Dialkyl 8,12-Diphenylbenzo[a]heptalene-6,7-dicarboxylates

The synthesis of 5,9-diphenylbenz[a]azulene ( 1 ) from 1,3-diphenylcyclopent[a]indene-2,8-dione ( 4 ) and cyclopropene has been re-investigated. The reduction of the decarbonylated cycloadduct 5 with LiAlH₄/AlCl₃ in Et₂O leads not only to the expected 7,10-dihydrobenz[a]azulene 6 , but also to small amounts of the cyclopropa[b]fluorenes exo- 7 and endo- 7 (cf. Scheme 2), the structures of which have been determined by X-ray crystal-structure analysis (cf. Fig. 1). The reaction of 1 with dialkyl acetylenedicarboxylates (ADR) in MeCN at 100° in the presence of 2 mol-% of catalysts such as [RuH₂(PPh₃)₄] results mainly in the formation of the expected 8,12-diphenylbenzo[a]heptalene-6,7-dicarboxylates 3 . A thorough investigation of the reaction mixture of 1 and dimethyl acetylenedicarboxylate (ADM) revealed the presence of a number of intermediates and side products (Scheme 5). Most important was the isolation and identification of the cyclobutene intermediate 9a (cf. Fig. 4), which is formed by a zwitterionic rearrangement of the primary adduct 2a of 1 and ADM and represents the direct precursor of the heptalene-diester 3a . Compounds of type 9a have so far only been postulated as necessary intermediates in the thermal reaction of azulenes and ADR to give corresponding heptalenedicarboxylates. Compound 9a is photochemically unstable and undergoes rearrangement even under the influence of normal laboratory light into a mixture of trans- 10a and cis- 10a (Scheme 8). Both diastereoisomers are also found in the original reaction mixture of 1 and ADM, but not when the reaction is performed under exclusion of light. On heating in MeCN at 100°, or better in DMF at 150°, trans- 10a and cis- 10a undergo rearrangement to the fluoranthene-1,2-dicarboxylate 11a (Scheme 9), which is also present in the original reaction mixture of 1 and ADM. The catalysts do not accelerate the reaction of 1 and ADR, but they lead to better yields of the benzo[a]heptalene-6,7-dicarboxylates 3 , especially in the reaction of 1 with diisopropyl acetylenedicarboxylate (ADiP) (cf. Tables 1 and 2).     

Umsetzung von Di(tert-butyl)- und Diphenyldiazomethan mit 1,3-Thiazol-5(4H)-thionen: Isolierung und Kristallstruktur des primären Cycloadduktes

Reaction of Di(tert-butyl)- and Diphenyldiazomethane and 1,3-Thiazole-5(4H)-thiones: Isolation and Crystal Structure of the Primary Cycloadduct Reactions of diazo compounds with C?S bonds proceed via the formation of thiocarbonyl ylides, which, under the reaction conditions, undergo either 1,3-dipolar cycloadditions or electrocyclic ring closer to thiiranes (Scheme 1). With the sterically hindered di(tert-butyl)diazomethane ( 2c ), 1,3-thiazole-5(4H)-thiones 1 react to give spirocyclic 2,5-dihydro-1,3,4-thiadiazoles 3 (Scheme 2). These adducts are stable in solution at ?20°, and they could be isolated in crystalline form. The structure of 3c was established by X-ray crystallography. In CDCl₃ solution at room temperature, a cycloreversion occurs, and the adducts of type 3 are in an equilibrium with 1 and 2c . In contrast, the reaction of 1 with diphenyldiazomethane ( 2d ) gave spirocyclic thiiranes 4 as the only product in high yield (Scheme 3). The crystal structure of 4b was also determined by X-ray analysis. The desulfurization of compounds 4 to 4,5-dihydro-5-(diphenylmethylidene)-1,3-thiazoles 5 was achieved by treating 4 with triphenylphosphine in boiling THF. The crystal structure of 5f is shown.