Photoinduced Molecular Transformations. Part 142. One-step syntheses of 1H-benz[f]indole-4,9-diones and 1H-indole-4,7-diones by a new regioselective photoaddition of 2-amino-1,4-naphthoquinones and 2-amino-1,4-benzoquinones with alkenes

The 2,3-dihydro-1H-benz[f]indole-4,9-diones 3a–d , h were formed in a one-step reaction in 13–82% yield by an unprecedented [3 + 2] regioselective photoaddition of 2-amino-1,4-naphthoquinone ( 1 ) with various electronrich alkenes 2 (Scheme 1, Table). The [3 + 2] photoadducts derived from 1 with vinyl ethers and vinyl acetate gave 1H-benz[f]indole-4,9-diones 4e , f , i , in 33–72% yield, by spontaneous loss of the corresponding alcohol or AcOH from the resulting adducts; 4i has a kinamycin skeleton. The [3 + 2] photoaddition also took place on irradiation of the differently substituted amino-1,4-benzoquinones 6 , 7 , and 12 and excess alkenes 2 in benzene, giving 1H-indole-4,7-dione derivatives 13 and 14 (Scheme 3), 15a and 16 (Scheme 4), and 18 (Scheme 4), respectively. The initial products in these photoadditions were proved to be hydroquinones, the air oxidation of which yielded the heterocyclic quinones; 2,3-dihydro-2-methoxy-2-methyl-5-phenyl-1H-indole-1,4,7-triyl triacetate ( 19 ) was isolated after treatment of the crude photoaddition mixture obtained from 2-amino-5-phenyl-1,4-benzoquinone ( 7 ) and 2-methoxyprop-1-ene ( 2f ) with Ac₂O and pyridine under N₂. A pathway leading to the annelated hydroquinones involving ionic intermediates arising from an electron transfer in these photoadditions is proposed (Scheme 5).     

‘Click Synthesis’ of Some Novel Benzimidazol Oxime Ethers Containing Heterocycle Residues as Potential ß‐Adrenergic Blocking Agents

The ‘click synthesis’ of some novel O‐substituted oximes, 5a – 5j , which contain heterocycle residues, as new analogs of ß‐adrenoceptor antagonists is described (Scheme 1). The synthesis of these compounds was achieved in four steps. The formation of (E)‐2‐(1H‐benzo[d]imidazol‐1‐yl)‐1‐phenylethanone oxime, followed by their reaction with 2‐(chloromethyl)oxirane, afforded mixture of oil compounds 3 and 4 , which by a subsequent tetra‐n‐butylammonium bromide (TBAB)‐catalyzed reaction with N H heterocycle compounds (Scheme 1), led to the target compounds 5a – 5j in good yields.     

Three-Component Reactions with Sterically Crowded 2,2,4,4-Tetramethyl-3-thioxocyclobutanone,Phenyl Azide,and Electron-Deficient C,C-Dipolarophiles

In order to trap ‘thiocarbonyl-aminides’ A , formed as intermediates in the reaction of thiocarbonyl compounds with phenyl azide, a mixture of 2,2,4,4-tetramethyl-3-thioxocyclobutanone ( 1 ), phenyl azide, and fumarodinitrile ( 8 ) was heated to 80° until evolution of N₂ ceased. Two interception products of the ‘thiocarbonylaminide’ A (Ar?Ph) were formed: the known 1,4,2-dithiazolidine 3 (cf. Scheme 1) and the new 1,2-thiazolidine 12 (Scheme 2). The structure of the latter was established by X-ray crystallography (Fig.1). The analogous ‘three-component reaction’ with dimethyl fumarate ( 9 ) yielded, instead of 8 , in addition to the known interception products 3 and 6 (Scheme 1), two unexpected products 15 and 16 (Scheme 3), of which the structures were elucidated by X-ray crystallography (Fig.2). Their formation is rationalized by a primary [2 + 3] cycloaddition of diazo compound 18 with 1 to give 19 , followed by a cascade of further reactions (Scheme 4).     

Synthesis of Bis‐Heterocyclic 1H‐Imidazole 3‐Oxides from 3‐Oxido‐1H‐imidazole‐4‐carbohydrazides

The reaction of 1H‐imidazole‐4‐carbohydrazides 1 , which are conveniently accessible by treatment of the corresponding esters with NH₂NH₂?H₂O, with isothiocyanates in refluxing EtOH led to thiosemicarbazides (=hydrazinecarbothioamides) 4 in high yields (Scheme 2). Whereas 4 in boiling aqueous NaOH yielded 2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thiones 5 , the reaction in concentrated H₂SO₄ at room temperature gave 1,3,4‐thiadiazol‐2‐amines 6 . Similarly, the reaction of 1 with butyl isocyanate led to semicarbazides 7 , which, under basic conditions, undergo cyclization to give 2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐ones 8 (Scheme 3). Treatment of 1 with Ac₂O yielded the diacylhydrazine derivatives 9 exclusively, and the alternative isomerization of 1 to imidazol‐2‐ones was not observed (Scheme 4). It is important to note that, in all these transformations, the imidazole N‐oxide residue is retained. Furthermore, it was shown that imidazole N‐oxides bearing a 1,2,4‐triazole‐3‐thione or 1,3,4‐thiadiazol‐2‐amine moiety undergo the S‐transfer reaction to give bis‐heterocyclic 1H‐imidazole‐2‐thiones 11 by treatment with 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione (Scheme 5).     

Ringerweiterung von sechs- zu neungliedrigen Heterocyclen: Umsetzung von 3-(Dimethylamino)-2,2-dimethyl-2H-azirin mit 3,4-Dihydro-2H-1,2,4-benzothiadiazin-3-on-1,1-dioxiden

Ring Enlargement of Six- to Nine-Membered Heterocycles: Reaction of 3-(Dimethylamino)-2,2-dimethyl-2H-azirine with 3,4-Dihydro-2H-1,2,4-benzothiadiazin-3-one 1,1-Dioxides Reaction of 3-(dimethylamino)-2,2-dimethyl-2H-azirine ( 1 ) and N-substituted 3,4-dihydro-2H-1,2,4-benzothiadiazin-3-one 1,1-dioxides ( 4 ) in CHCl₃ yields 3-(dimethylamino)-4,5,6,7-tetrahydro-1,2,5,7-benzothiatriazonin-6-one 1,1-dioxides 5 , a novel nine-membered heterocyclic system, by ring enlargement (Schemes 2 and 4). In refluxing MeOH, the heterocycle 5a rearranges to give the N-[1-methyl-1-(1,1-dioxo-4H-1,2,4-benzothiadiazin-3-yl)ethyl]-N′, N′-dimethylurea 10 . The three isomeric 2-(methylamino)benzenesufonamides 8,9 , and 11 (Scheme 3) are obtained by naBH₄ reduction of 5a and 10 , respectively. Mechanisms for the thermal isomerization 5a → 10 and the NaBH₄ reduction of 5a are proposed in Schemes 5 and 6.     

1,3-Dipole mit zentralem S-Atom aus der Umsetzung von Aziden mit Thiocarbonyl-Verbindungen: Eine unerwartete MeS-Wanderung im Abfangprodukt eines ‘Thiocarbonyl-aminids’ mit Dithiobenzoesäure-methylester

1,3-Dipoles with a Central S-Atom from the Reaction of Azides and Thiocarbonyl Compounds: An Unexpected MeS Migration in the Trapping Product of a ‘Thiocarbonyl-aminide’ with Methyl Dithiobenzoate Reaction of PhN₃ with O-methyl thiobenzoate ( 11a ) and thioacetate ( 11c ) as well as with the dithio esters 11b,d at 80° yields the corresponding imidates and thioimidates 12 (Scheme 3). The formation of 12 is rationalized by a 1,3-dipolar cycloaddition of the azide and the C?S group followed by successive elimination of N₂ and S. In the three-component reaction of 11b , PhN₃, and the sterically crowded thioketone 1a , 1,2,4-trithiolane 13a and 1,4,2-dithiazolidine 3a are formed in addition to 12b (Scheme 4). The heterocycles 13a and 3a are trapping products of 1a and ‘thiocarbonyl-thiolate’ 5a and ‘thiocarbonyl-aminide’ 2a (Ar?Ph), respectively (Scheme 6). These 1,3-dipoles are formed as reactive intermediates. Surprisingly, in the presence of catalytic amounts of acids, the major product is the (methyldithio)cyclobutyl thioimidate of type 14 (Scheme 5), formed by an acid-catalyzed MeS migration in dithiazolidine 17 . A reaction mechanism is proposed in Scheme 7.     

Reactions of Stable α‐Chlorosulfanyl Chlorides with CS‐Functionalized Compounds

The smooth reaction of 3‐chloro‐3‐(chlorosulfanyl)‐2,2,4,4‐tetramethylcyclobutanone ( 3 ) with 3,4,5‐trisubstituted 2,3‐dihydro‐1H‐imidazole‐2‐thiones 8 and 2‐thiouracil ( 10 ) in CH₂Cl₂/Et₃N at room temperature yielded the corresponding disulfanes 9 and 11 (Scheme 2), respectively, via a nucleophilic substitution of Cl^? of the sulfanyl chloride by the S‐atom of the heterocyclic thione. The analogous reaction of 3‐cyclohexyl‐2,3‐dihydro‐4,5‐diphenyl‐1H‐imidazole‐2‐thione ( 8b ) and 10 with the chlorodisulfanyl derivative 16 led to the corresponding trisulfanes 17 and 18 (Scheme 4), respectively. On the other hand, the reaction of 3 and 4,4‐dimethyl‐2‐phenyl‐1,3‐thiazole‐5(4H)‐thione ( 12 ) in CH₂Cl₂ gave only 4,4‐dimethyl‐2‐phenyl‐1,3‐thiazol‐5(4H)‐one ( 13 ) and the trithioorthoester derivative 14 , a bis‐disulfane, in low yield (Scheme 3). At ?78°, only bis(1‐chloro‐2,2,4,4‐tetramethyl‐3‐oxocyclobutyl)polysulfanes 15 were formed. Even at ?78°, a 1 : 2 mixture of 12 and 16 in CH₂Cl₂ reacted to give 13 and the symmetrical pentasulfane 19 in good yield (Scheme 5). The structures of 11, 14, 17 , and 18 have been established by X‐ray crystallography.     

Novel Heterospirocyclic 3-Amino-2H-azirines as Synthons for Heterocyclic α-Amino Acids

The heterospirocyclic N-methyl-N-phenyl-2H-azirin-3-amines (3-(N-methyl-N-phenylamino)-2H-azirines) 1a - d with a tetrahydro-2H-thiopyran, tetrahydro-2H-thiopyran, and a N-protected piperidine ring, respectively, were synthesized from the corresponding heterocyclic 4-carboxamides 2 by consecutive treatment with lithium diisopropylamide (LDA), diphenyl phosphorochloridate (DPPCI), and sodium azide (Scheme 4). The reaction of these aminoazirines with thiobenzoic acid in CH₂Cl₂ at room temperature gave the thiocarbamoyl-substituted benzamides 13a - d in high yield. The azirines 1a-d were used as synthons for heterocyclic α-amino acids in the preparation of tripeptides of the type Z-Aib-Xaa-Aib-N(Ph)Me ( 18 ) by following the protocol of the ‘azirine/oxazolone method’: treatment of Z-Aib with 1 to give the dipeptide amide 15 , followed by selective hydrolysis to the corresponding acid 16 and coupling with the 2,2-dimethyl-2H-azirin-3-amine 17 gave 18 , again in high yield (Scheme 5). With some selected examples of 18 , the selective deprotection of the amino and the carboxy group, respectively, was demonstrated (Scheme 6). The solid-state conformations of the protected tripeptides 18a - d , as well as that of the corresponding carbocyclic analogue 18e , were determined by X-ray crystallography (Figs. 1-3 and Tables 1-3). All five tripeptides adopt a β-turn conformation of type III or III′. The solvent dependence of the chemical shifts of the NH resonances (Fig. 6) suggests that there is an intramolecular H-bond between H-N(4) and O(11) in all cases, which is an indication that a relatively rigid β-turn structure also persists in solution. Surprisingly, the tripeptide acid 20a shows no intramolecular H-bond in the crystalline state (Fig. 7); O(11) is involved in an intermolecular H-bond with the OH group of the carboxy function.     

Bortrifluorid-katalysierte Umsetzungen von 3-Amino-2H-azirinen mit Aminosäure-estern und Aminen

Boron-Trifluoride-Catalyzed Reactions of 3-Amino-2H-azirines with Amino-acid Esters and Amines After activation by protonation or complexation with BF₃, 3-amino-2H-azirines 1 react with the amino group of α-amino-acid esters 3 to give 3,6-dihydro-5-aminopyrazin-2(1H)-ones 4 by ring enlargement (Scheme 2, Table 1). The configuration of 3 is retained in the products 4 . With unsymmetrically substituted 1 (R¹ ≠ R²), two diastereoisomers of 4 (cis and trans) are formed in a ratio of 1:1 to 2:1. With β-amino-acid esters 5 and 7 , only openchain α-amino-imidamides 6 and 8 , respectively, are formed, but none of the seven-membered heterocycle (Scheme 3). Primary amines also react with BF₃-complexed 1 to yield α-amino-imidamides of type 9 (Scheme 4, Table 2). Compound 9b is characterized chemically by its transformation into crystalline derivatives 10 and 12 with 4-nitrobenzoyl chloride and phenyl isothiocyanate, respectively (Scheme 5). The structure of 12 is established by X-ray crystallography. Mechanisms for the reaction of activated 1 with amino groups are proposed in Schemes 6 and 7.     

15N-Markiertes 3-(Dimethylamino)-2,2-dimethyl-2H-azirin zur mechanistischen Untersuchung von Reaktionen mit NH-aciden Heterocyclen

₁₅N-Labelled 3-(Dimethylamino)-2,2-dimethyl-2H-azirine for Mechanistic Studies of Reactions with NH-Acidic Heterocycles The synthesis of 3-(dimethylamino)-2,2-dimethyl(1-¹⁵N)-2H-azirine ( 1 *) was accomplished via reaction of 1-chloro-N,N,2-trimethyl-1-propenylamine ( 9 ) and sodium (1-¹⁵N) azide (Scheme 3). The earlier reported reactions of 1 with saccharin ( 10 , Scheme 4), phthalimide ( 12 , Scheme 5), and 2H-1,3-benzoxazin-2,4(3H)-dione ( 16 , Scheme 6) were repeated with 1 *, and the position of the ¹⁵N-label in the products was determined by ¹⁵N-NMR spectroscopy. Whereas the postulated reaction mechanisms for 10 and 12 were confirmed by these experiments, the mechanism for the reaction of 16 had to be revised. With respect to the position of ¹⁵N in the products 17 and 18 , a new mechanism is formulated in Scheme 7. Treatment of 5,5-dimethyl-1,3-oxazolidine-2,4-dione ( 19 ) with 1 * led to 3,4-dihydro-2H-imidazol-2-on 20 in which only N(3) was labelled. The mechanism of a ring expansion and transannular ring contraction as shown in Scheme 8 is in agreement with this finding.     

Diazo-Transfer Reaction with Diphenyl Phosphorazidate

Diphenyl phosphorazidate (DPPA) was used as the azide source in a one-pot synthesis of 2,2-disubstituted 3-amino-2H-azirines 1 (Scheme 1). The reaction with lithium enolates of amides of type 2 , bearing two substituents at C(2), proceeded smoothly in THF at 0°; keteniminium azides C and azidoenamines D are likely intermediates. Under analogous reaction conditions, DPPA and amides of type 3 with only one substituent at C(2) gave 2-diazoamides 5 in fair-to-good yield (Scheme 2). The corresponding 2-diazo derivatives 6–8 were formed in low yield by treatment of the lithium enolates of N,N-dimethyl-2-phenylacetamide, methyl 2-phenylacetate, and benzyl phenyl ketone, respectively, with DPPA. Thermolysis of 2-diazo-N-methyl-N-phenylcarboxamides 5a and 5b yielded 3-substituted 1,3-dihydro-N-methyl-2H-indol-2-ones 9a and 9b , respectively (Scheme 3). The diazo compounds 5–8 reacted with 1,3-thiazole-5 (4H)-thiones 10 and thiobenzophenone ( 13 ) to give 6-oxa-1,9-dithia-3-azaspiro[4.4]nona-2,7-dienes 11 (Scheme 4) and thiirane-2-carboxylic acid derivatives 14 (Scheme 5), respectively. In analogy to previously described reactions, a mechanism via 1,3-dipolar cycloaddition, leading to 2,5-dihydro-1,3,4-thiadiazoles, and elimination of N₂ to give the ‘thiocarbonyl ylides’ of type H or K is proposed. These dipolar intermediates with a conjugated C?O group then undergo either a 1,5-dipolar electrocyclization to give spirohetrocycles 11 or a 1,3-dipolar electrocyclization to thiiranes 14 .     

Additionsreaktionen von 3-Dimethylamino-2,2-dimethyl-2H-azirin an Phenylisocyanat und Diphenylketen

Addition Reaction of 3-Dimethylamino-2,2-dimethyl-2H-azirine with Phenylisocyanate and Diphenylketene 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1a ) reacts with carbon disulfide and isothiocyanates with splitting of the azirine N(1), C(3)-double bond to give dipolar, fivemembered heterocyclic 1:1 adducts. In some cases, these products can undergo secondary reactions to yield 1:2 and 1:3 adducts. In this paper it is shown that the reaction of 1a with phenylisocyanate also takes place by cleavage of the N(1), C(3)-bond, whereas with diphenylketene N(1), C(2)-splitting is observed. The reaction of 1a and phenylisocyanate in hexane at room temperature yields the 1:3 adduct 2 in addition to the trimeric isocyanate 3 (Scheme 1). A mechanism for the formation of 2 is given in Scheme 5. Hydrolysis experiments with the 1:3 adduct 2 , yielding the hydantoins 4–6 and the ureas 7 and 8 (Schemes 3 and 5), show that the formation of this adduct via the intermediates d , e and f is a reversible reaction. The aminoazirines 1a and 1b undergo an addition reaction with diphenylketene to give the 3-oxazolines 14 (Scheme 8), the structure of which has been established by spectral data and oxidative degradation of 14a to the 3-oxazolin-2-one 15 (R¹ ? R² ? CH₃, Scheme 9).     

Towards the Synthesis of Azoacetylenes

The synthesis of azoacetylenes (=dialkynyldiazenes) 1 and 2 has been investigated. They represent a still elusive class of chromophores with potentially very interesting applications as novel bistable photochemical molecular switches or as antitumor agents (Fig. 1). Our synthetic efforts have led us alongside three different approaches (Scheme 1). In a first route, it was envisioned to generate the azo (=diazene) bond by photolysis of N,N′‐dialkynylated 1,3,4‐thiadiazolidine‐2,5‐diones that are themselves challenging targets (Scheme 2). Attempts are described to obtain the latter by alkynylation of the parent heterocycle with substituted alkynyliodonium salts. In a conceptually similar approach, the no‐less‐challenging dialkynylated 9,10‐dihydro‐9,10‐diazanoanthracene ( 29 ) was to be generated by alkynylation of the unsubstituted hydrazine 28 (Scheme 6). In a second route, the generation of the N?N bond from Br‐substituted divinylidenehydrazines (ketene‐azines) 35 was attempted in a synthetic scheme involving an aza‐Wittig reaction between azinobis(phosphorane) 36 and (triisopropylsilyl)ketene 37 (Scheme 7). Finally, a third approach, based on the formation of the central azo bond as the key step, was explored. This route involved the extrapolation of a newly discovered condensation reaction of N,N‐disilylated anilines with nitroso compounds (Scheme 11, and Tables 1 and 2) to the transformation of N,N‐disilylated ynamine 55 and nitroso‐alkyne 54 (Scheme 13).     

Reaction of 3-Amino-2H-azirines with 2-Amino-4,6-dinitrophenol (Picramic Acid): Synthesis of Quinazoline- and 1,3-Benzoxazole Derivatives

The reaction of 3-(dimethylamino)-2H-azirines 1a–c and 2-amino-4,6-dinitrophenol (picramic acid, 2 ) in MeCN at 0° to room temperature leads to a mixture of the corresponding 1,2,3,4-tetrahydroquinazoline-2-one 5 , 3-(dimethylamino)-1,2-dihydroquinazoline 6 , 2-(1-aminoalkyl)-1,3-benzoxazole 7 , and N-[2-(dimethylamino)phenyl]-α-aminocarboxamide 8 (Scheme 3). Under the same conditions, 3-(N-methyl-N-phenyl-amino)-2H-azirines 1d and 1e react with 2 to give exclusively the 1,3-benzoxazole derivative 7 . The structure of the products has been established by X-ray crystallography. Two different reaction mechanisms for the formation of 7 are discussed in Scheme 6. Treatment of 7 with phenyl isocyanate, 4-nitrobenzoyl chloride, tosyl chloride, and HCl leads to a derivatization of the NH₂-group of 7 (Scheme 4). With NaOH or NaOMe as well as with morpholine, 7 is transformed into quinazoline derivatives 5 , 14 , and 15 , respectively, via ring expansion (Scheme 5). In case of the reaction with morpholine, a second product 16 , corresponding to structure 8 , is isolated. With these results, the reaction of 1 and 2 is interpreted as the primary formation of 7 , which, under the reaction conditions, reacts with Me₂NH to yield the secondary products 5 , 6 , and 8 (Scheme 7).     

Aminierende,reduktive Kupplung aromatischer Aldehyde mit Tris(dialkylamino)methylvanandium (IV) zu N,N,N′,N′-Tetraaalkyl-1,2-diaryläthylendiaminen

Aminative Reductive Coupling of Aromatic Aldehydes to N,N,N′,N′-Tetraalkyl-1,2-diarylethylenediamines, Induced by Tris(dialkylamino)methylvanadium (IV) In a novel type of reaction, certain aromatic aldehydes (benzaldehyde, p-methoxybenzaldehyde, 1-naphthaldehyde, furan-2-carbaldehyde) and secondary amines are coupled to give N,N,N′,N′-tetraalkyl-1,2-diarylethylenediamines 1–6 . The reagents are tris(dialkylamino)methylvanadium(IV) compounds (cf. Eqn. 2). These are generated in situ either from isolable chlorotris(dialkylamino) vanadium(IV) (Eqn. 3), or preferably, from an Et₂O/pentane solution of VCl₄ which is treated sequentially with 3 equiv. of lithium dialkylamide, 1 equiv. of MeLi, and 0.8 equiv. of an aromatic aldehyde, to give the products 1–6 in a one-pot preparation (Scheme 2). The yields range from 14 to 54%. The diastereoisomeric mixtures (meso- and (±)-forms) obtained are separated by chromatography (Al₂O₃, petroleum ether/Et₂O/Et₃N), and the pure stereoisomers fully characterized. A mechanism of the reductive coupling induced by CH₃V (NR₂)₃ is proposed (Scheme 1).     

Transition metal complexes of novel tridentate S,N,O donor ligands

Summary Complexes of chromium(III), iron(III), cobalt(III), nickel(II) and copper(II) with salicylaldehyde N(1-piperidyl) thiocarbonyl hydrazone (spthH₂), salicylaldehyde N-(1-morpholyl) thiocarbonyl hydrazone (smthH₂), 2-hydroxy 4-methyl acetophenone N-(1-piperidyl) thiocarbonyl hydrazone (apthH₂) and 2-hydroxy 4-methyl acetophenone N-(1-morpholyl) thiocarbonyl hydrazone (amthH₂) have been prepared and characterized by analytical, spectral and magnetic measurements. Mixed ligand complexes of Cu^II-thiocarbonyl hydrazones and heterocyclic bases have been isolated. Depending on the nature of the metal salts used and the reaction conditions the thiocarbonyl hydrazones act as neutral or dibasic tridentate ligands.     

A Direct Route to 3-(D-Ribofuranosyl)pyridine Nucleosides

A route for synthesizing C-nucleosides with 2,6-substituted pyridines as heterocyclic aglycones is described. Condensation of appropriately substituted lithiated pyridines with ribono-1,4-lactone derivatives yields hemiacetal 4a – g (Table 1), which can be reduced by Et₃SiH and BF₃·Et₂O to the corresponding C-nucleoside (see Scheme 1 for 4d → β-D - 5 ). Conditions are presented that optimize the amount of the 2,6-dichloropyridine-derived β-D -anomer β-D - 5 formed (Table 3). Aminolysis of β-D - 5 yields the diaminonucleoside 14 (Scheme 3).     

Methanofullerene Molecular Scaffolding: Towards C60-substituted poly(triacetylenes) and expanded radialenes,preparation of a C60–C70 hybrid derivative,and a novel macrocyclization reaction

The synthesis of (E)-hex-3-ene-l, 5-diynes and 3-methylidenepenta-1, 4-diynes with pendant methano[60]-fullerene moieties as precursors to C₆₀-substituted poly(triacetylenes) (PTAs, Fig. 1) and expanded radialenes (Fig. 2) is described. The Bingel reaction of diethyl (E)-2, 3-dialkynylbut-2-ene-1, 4-diyl bis(2-bromopropane-dioates) 5 and 6 with two C₆₀ molecules (Scheme 2) afforded the monomeric, silyl-protected PTA precursors 9 and 10 which, however, could not be effectively desilylated (Scheme 4). Also formed during the synthesis of 9 and 10 , as well as during the reaction of C₆₀ with thedesilylated analogue 16 (Scheme 5 ), were the macrocyclic products 11, 12 , and 17 , respectively, resulting from double Bingel addition to one C-sphere. Rigorous analysis revealed that this novel macrocyclization reaction proceeds with complete regio- and diastereoselectivity. The second approach to a suitable PTA monomer attempted N, N′-dicyclohexylcarbodiimide(DCC)-mediated esterification of (E)-2, 3-diethynylbut-2-ene-l, 4-diol ( 18 , Scheme 6) with mono-esterified methanofullerene-dicarboxylic acid 23 ; however, this synthesis yielded only the corresponding decarboxylated methanofullerene-carboxylic ester 27 (Scheme 7). To prevent decarboxylation, a spacer was inserted between the reacting carboxylic-acid moiety and the methane C-atom in carboxymethyl ethyl 1, 2-methano[60]fullerene-61, 61-dicarboxylate ( 28 , Scheme 8), and DCC-mediated esterification with diol 18 afforded PTA monomer 32 in good yield. The formation of a suitable monomeric precursor 38 to C₆₀-substituted expanded radialenes was achieved in 5 steps starting from dihydroxyacetone (Schemes 9 and 10), with the final step consisting of the DCC-mediated esterification of 28 with 2-[1-ethynyl(prop-2-ynylidene)]propane-1, 3-diol ( 33 ). The first mixed C₆₀-C₇₀ fullerene derivative 49 , consisting of two methano[60]fullerenes attached to a methano[70]fullerene, was also prepared and fully characterized (Scheme 13). The C_s-symmetrical hybrid compound was obtained by DCC-mediated esterification of bis[2-(2-hydroxy-ethoxy)ethyl] 1, 2-methano[70]fullerene-71, 71-dicarboxylate ( 46 ) with an excess of the C₆₀-carboxylic acid 28 . The presence of two different fullerenes in the same molecule was reflected by its UV/VIS spectrum, which displayed the characteristic absorption bands of both the C₇₀ and C₆₀ mono-adducts, but at the same time indicated no electronic interaction between the different fullerene moieties. Cyclic voltammetry showed two reversible reduction steps for 49 , and comparison with the corresponding C₇₀ and C₆₀ mono-adducts 46 and 30 indicated that the three fullerenes in the composite fullerene compound behave as independent redox centers.     

Studies on Reactions of Thioketones with Trimethyl(trifluoromethyl)silane Catalyzed by Fluoride Ions

Treatment of 2,2,4,4‐tetramethylcyclobutane‐1,3‐dione ( 6 ) in THF with CF₃SiMe₃ in the presence of tetrabutylammonium fluoride (TBAF) yielded the corresponding 3‐(trifluoromethyl)‐3‐[(trimethylsilyl)oxy]cyclobutanone 7 (Scheme 1) via nucleophilic addition of a CF anion at the CO group and subsequent silylation of the alcoholate. Under similar conditions, the ‘monothione' 1 reacted to give thietane derivative 8 (Scheme 2), whereas in the case of ‘dithione' 2 only the dispirodithietane 9 , the dimer of 2 , was formed (Scheme 3). A conceivable mechanism for the formation of 8 is the ring opening of the primarily formed CF₃ adduct A followed by ring closure via the S‐atom (Scheme 2). In the case of thiobenzophenones 4 , complex mixtures of products were obtained including diarylmethyl trifluoromethyl sulfide 10 and 1,1‐diaryl‐2,2‐difluoroethene 11 (Scheme 4). Obviously, competing thiophilic and carbophilic addition of the CF anion took place. The reaction with 9H‐fluorene‐9‐thione ( 5 ) yielded only 9,9′‐bifluorenylidene ( 14 ; Scheme 6); this product was also formed when 5 was treated with TBAF alone. Treatment of 4a with TBAF in THF gave dibenzhydryl disulfide ( 15 ; Scheme 7), whereas, under similar conditions, 1 yielded the 3‐oxopentanedithioate 17 (Scheme 9). The reaction of dithione 2 with TBAF led to the isomeric dithiolactone 16 (Scheme 8), and 3 was transformed into 1,2,4‐trithiolane 18 (Scheme 10).     

Radical Arylation Reactions of 4, 6, 8-Trimethylazulene

The synthesis of 1- and 2-aryl-substituted (aryl = Ph, 4-NO₂? C₆H₄, and 4-MeO? C₆H₄) 4, 6, 8-trimethylazulenes ( 4 and 3 , respectively) in moderate yields by direct arylation of 4, 6, 8-trimethylazulene ( 8 ) with the corresponding arylhydrazines 13 in the presence of Cu^IIions in pyridine (see Scheme 4) as well as with 4-MeO? C₆H₄Pb(OAc)₃ ( 16 ) in CF₃COOH (see Scheme 5) is described. With 13 , also small amounts of 1, 2- and 1, 3-diarylated azulenes (see 14 and 15 , respectively, in Scheme 4) are formed. The 4-methoxyphenylation of 8 with 16 yielded also the 1, 1′-biazulene 17 in minor amounts (see Scheme 5). 4, 6, 8-Trimethyl-2-phenylazulene ( 3a ) was also obtained as the sole product in moderate yields by the reaction of sodium phenylclopentadienide ( 1a ) with 2, 4, 6-trimethylpyrylium tetrafluoroborate ( 2 ) in THF (Scheme 1). The attempted phenylation of 8 as well as of azulene ( 9 ) itself with N-nitroso-N-phenylacetamide ( 10 ) led only to the formation of the corresponding 1-(phenylazo)-substituted azulenes 12 and 11 , respectively (Scheme 3).