The mechanism of O(3P) atom reaction with ethylene and other simple olefins

Reactions of oxygen atoms with ethylene, propene, and 2-butene were studied at room temperature under discharge flow conditions by resonance fluorescence spectroscopy of O and H atoms at pressures of 0.08 to 12 torr. The measured total rate constants of these reactions are K = (7.8 ± 0.6)·10^?13cm³s^?1,K = (4.3 ± 0.4) ± 10^?12 cm³ s^?1, K = (1.4 ± 0.4) · 10^?11 cm³ s^?1. The branching ratios of H atom elimination channels were measured for reactions of O atoms with ethylene and propene. No H-atom elimination was found for the reaction of O-atoms with 2-butene. A redistribution of reaction O + C₂ channels with pressure was found. A mechanism of the O + C₂ reaction was proposed and the possibility of its application to other olefins is discussed. On the basis of mechanism the pressure dependence of the total rate constant for reaction O + C₂ was predicted and experimentally confirmed in the pressure range 0.08–1.46 torr.     

The kinetics of the reaction F + H2 → HF + H. A critical review of literature data

Published experimental studies concerning the determination of rate constants for the reaction F + H₂ → HF + H are reviewed critically and conclusions are presented as to the most accurate results available. Based on these results, the recommended Arrhenius expression for the temperature range 190–376 K is k = (1.1 ± 0.1) × 10⁻¹⁰ exp |-(450 ± 50)/T| cm³ molecule⁻¹ s⁻¹, and the recommended value for the rate constant at 298 K is k = (2.43 ± 0.15) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The recommended Arrhenius expression for the reaction F + D₂ → DF + D, for the same temperature range, based on the recommended expression for k and accurate results for the kinetic isotope effect k/k is k = (1.06 ± 0.12) × 10^×10 exp |-(635 ± 55)/T|cm³ molecule⁻¹ s⁻¹, and the recommended value for 298 K is k = (1.25 ± 0.10) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 67–71, 1997.     

The 13C and D kinetic isotope effects in the reaction of CH4 with Cl

The kinetic isotope effects in the reaction of methane (CH₄) with Cl atoms are studied in a relative rate experiment at 298 ± 2 K and 1013 ± 10 mbar. The reaction rates of ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl radicals are measured relative to ¹²CH₄ in a smog chamber using long path FTIR detection. The experimental data are analyzed with a nonlinear least squares spectral fitting method using measured high‐resolution spectra as well as cross sections from the HITRAN database. The relative reaction rates of ¹²CH₄, ¹³CH₄, ¹²CH₃D, ¹²CH₂D₂, ¹²CHD₃, and ¹²CD₄ with Cl are determined as k/k = 1.06 ± 0.01, k/k = 1.47 ± 0.03, k/k = 2.45 ± 0.05, k/k = 4.7 ± 0.1, k/k = 14.7 ± 0.3. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 110–118, 2005     

Recommendations for measuring second-order rate constants and kinetic solvent isotope effects on acid-catalyzed reactions

Kinetic solvent isotope effects (KSIE) were measured for the hydrolyses of acetals of benzaldehydes in aqueous solutions covering the pH (pD) range of 1–6. For p-methoxybenzaldehyde diethyl acetal, k/k = 1.8–3.1, depending on the procedure used to calculate the KSIE and on the pH (pD) range used as the basis for k(k). It is shown that this variation is an experimental artifact, and is a characteristic of KSIE measurements in general. It is recommended that k be calculated from a least-squares fit of data to the equation k_obs = k[L⁺], and that the KSIE be reported as k/k. The limitation remains, however, that the KSIE measured for a variety of substances over quite different pH (pD) ranges may not be comparable to more than ?20%. The source of these observations is discussed in terms of small changes in the activity coefficient ratios (a specific salt effect), including the solvent isotope effect on the activity coefficient ratio [eq. (3)].     

Thermodynamic Studies on the Complexation Reactions of copper(II) Macrocyclic Tetramine Complexes with Monodentate Ligands: I. RAC-5, 7, 7, 12, 14, 14-Hexamethyl-l, 4, 8, 11-Tetraazacyclotetradecane-Copper(II) (Blue) with-Halide Ions

The possibility of a trigonal bipyramidal structure for [Cu(tet b)X]⁺ (blue) (where X=Cl, Br, I) is supported by the observation of two distinct d-d bands, which are assigned as and d, d_xy→d and d_xz, d_yz→d transitions respectively. The stability constants for the formation of [Cu(tet b)X]⁺ (blue) from [Cu(tet b)]^z+ (blue) and X^? were determined by spectrophotometric method at 25°, 35° and 45°C. The corresponding δH° and δS° values were obtained from the variations of the stability constants between 25° and 45°C     

A Rational Approach to Selective Recognition of NH4+ over K+

An ion-selective electrode (ISE) based on receptor 1 is highly selective for binding NH₄⁺ over K⁺ (lg K=−2.6); the three imine nitrogen atoms in 1 are ideally positioned for hydrogen bonding with the tetrahedral NH₄⁺ ion. This selectivity is considerably greater than that found for commercial ISEs based on nonactin (lg K=−1.0).     

Kinetics and mechanism of the oxidation of some carboxylates by a nickel (III) oxime-imine complex

The kinetics of the oxidation of formate, oxalate, and malonate by |Ni^III(L¹)|²⁺ (where HL¹ = 15-amino-3-methyl-4,7,10,13-tetraazapentadec-3-en-2-one oxime) were carried out over the regions pH 3.0–5.75, 2.80–5.50, and 2.50–7.58, respectively, at constant ionic strength and temperature 40°C. All the reactions are overall second-order with first-order on both the oxidant and reductant. A general rate law is given as - d/dt|Ni^III(L¹)²⁺| = k_obs|Ni^III(L¹)²⁺| = (k_d + nk_s |R|)|Ni^III(L¹)²⁺|, where k_d is the auto-decomposition rate constant of the complex, k_s is the electron transfer rate constant, n is the stoichiometric factor, and R is either formate, oxalate, or malonate. The reactivity of all the reacting species of the reductants in solution were evaluated choosing suitable pH regions. The reactivity orders are: k_HCOOH > k; k > k > k, and k > k < k for the oxidation of formate, oxalate, and malonate, respectively, and these trends were explained considering the effect of hydrogen bonded adduct formation and thermodynamic potential. © 1997 John Wiley & Sons, Inc. Int J Chem Kinet 29: 225–230, 1997.     

Kinetics of the reaction of poly(α-methylstyryl sodium,potassium, and cesium) with t-butyl chloride in tetrahydrofuran

The kinetics of the reaction of “living” poly(α-methylstyrl sodium, potassium, and cesium) with t-butyl chloride have been studied spectrophotometrically in tetrahydrofuran (THF) in the temperature range 283–303 K. The reactions, when the free ions present in solution are suppressed by tetraphenylboron salt, are first order with respect to both living ends and halide concentrations. Additions of tetraphenylboron salts produce a slight retardation effect on the rate of reaction in the case of sodium, indicating only a small contribution of free ions to the overall rate; in the case of potassium, there is no apparent effect. Analysis of the data indicates that the free ion is approximately 30 times more reactive than the sodium ion pair. The Arrhenius plots for contact ion-pair termination are linear and the activation energies and preexponential factors determined are E = 38.6 kJ mole^?1, log A = 4.44 liter mole^?1 sec^?1 and E = 46.0 kJ mole^?1, log A = 5.10 liter mole^?1 sec^?1. The reaction mechanism is interpreted in terms of elimination plus some side reaction to produce two unexpected reaction products—isobutane and a 315–320-nm absorbing grouping in the polymer.     

Peculiar kinetics of the complex formation in the iron(III)–sulfate system

The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+$ step and k₂ = 1.1 × 10³ M^?1 s^?1 for the ${\rm FeSO}_4^+ + {\rm SO}_4^{2-} \stackrel{k_2}{\rightleftharpoons}\, {\rm Fe}({\rm SO}_4)_2^-$ step. The mono‐sulfate complex is also formed in the ${\rm Fe}({\rm OH})^{2+} + {\rm SO}_4^{2-} \stackrel{k_{1b}}{\longrightarrow} {\rm FeSO}_4^+$ reaction with the k_1b = 2.7 × 10⁵ M^?1 s^?1 rate constant. The most surprising result is, however, that the 2 FeSO? Fe³⁺ + Fe(SO₄) equilibrium is established well before the system as a whole reaches its equilibrium state, and the main path of the formation of Fe(SO₄) is the above fast (on the stopped flow scale) equilibrium process. The use and advantages of our recently elaborated programs for the evaluation of equilibrium and kinetic experiments are briefly outlined. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 114–124, 2008     

Gas‐phase reaction of Cl with dimethyl sulfide: Temperature and oxygen partial pressure dependence of the rate coefficient

The kinetics of the reaction of Cl atoms with dimethyl sulfide has been investigated using a relative rate technique. Experiments were performed with oxygen partial pressures of 0, 200, and 500 mbar at a total pressure of 1000 mbar (N₂ + O₂) over the temperature range 283–308 K in a 1080 L reactor using long path in situ Fourier transform infrared absorption spectroscopy to monitor the reactants. The 254 nm photolysis of trichloroacetyl chloride was used as the Cl atom source. Three reference hydrocarbons, cyclohexane, n‐butane, and propene were employed. Good agreement was found between the rate coefficients determined using the different reference compounds. The rate coefficients were found to decrease with increasing temperature at constant O₂ pressure and increase moderately with increasing O₂ partial pressure at constant temperature. The temperature dependences of the Cl atom reaction with dimethyl sulfide for the three O₂ partial pressure investigated can be expressed by the simple Arrhenius expressions: k = (4.22 ± 1.78) × 10^?13 exp((1968 ± 379)/T), k = (5.42 ± 1.85) × 10^?13 exp((1946 ± 381)/T), and k = (6.90 ± 2.04) × 10^?13 exp((1912 ± 381)/T). The errors are a combination of the 2σ statistical errors from the kinetic data analysis plus an estimated systematic error that includes the error in the reference hydrocarbon. The mechanistic implications of the results are discussed. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 66–73, 2005     

Synthesis and Characterization of a Family of POCOP Pincer Complexes with Nickel: Reactivity Towards CO2 and Phenylacetylene

A cyclohexyl‐based POCOP pincer ligand (POCOP=cis‐1,3‐bis(di‐tert‐butylphosphinito)cyclohexyl) cyclometalates with nickel to generate a series of new POCOP‐supported Ni^II complexes, including the halide, hydride, methyl, and phenyl species. trans‐[NiCl{cis‐1,3‐bis(di‐tert‐butylphosphinito)cyclohexane}], [(POCOP)NiCl] ( 1 a ) and the analogous bromide complex ( 1 b ) were synthesized and fully characterized by NMR spectroscopy and X‐ray crystallography. Cyclic voltammetry measurements of 1 a and 1 b alongside their bis(phosphine) analogues [(PCP)NiCl] ( 2 a ) and [(PCP)NiCl] ( 2 a ) (PCP=cis‐1,3‐bis(di‐tert‐butylphosphino)cyclohexyl) indicate a reduced electron density at the metal center upon introducing electron‐withdrawing oxygen atoms in the pincer arms. The methyl [(POCOP)NiMe] ( 3 ) and phenyl [(POCOP)NiPh] ( 4 ) complexes were formed from 1 a by reaction with the corresponding organolithium reagents. 1 a also reacts with LiAlH₄ to give the hydride complex [(POCOP)NiH] ( 5 ). The methyl complex 3 reacts with phenyl acetylene to give the acetylide complex [(POCOP)NiCCPh] ( 6 ). The reactivity of compounds 3 – 5 towards CO₂ was studied. The hydride complex 5 and the methyl complex 3 both underwent CO₂ insertion to form the formate species [(POCOP)NiOCOH] ( 7 ) and acetate species [(POCOP)NiOCOCH₃] ( 8 ), respectively, although with a higher barrier of insertion in the latter case. Compound 4 was unreactive towards CO₂ even at elevated temperatures. Complexes 3 – 8 were all characterized by NMR spectroscopy and X‐ray crystallography.     

The effect of water content on the ultimate properties of rubbery nanocomposite gels

An investigation was conducted into the effects of water content (R) on the ultimate tensile properties of nanocomposite hydrogels (NC gels) based on poly(N‐isopropylacrylamide)/clay networks. Rubbery NC gels with low clay contents (<NC10) exhibited unique changes in their stress–strain curves, depending on the R. At high R, where PNIPA chains are fully hydrated, NC gels retained their rubbery tensile properties, whereas they changed to exhibit plastic‐like deformations with decreasing R. Consequently, for a series of NC gels with different R, a failure envelope was obtained by connecting the rupture points in the stress–strain curves. Here, the counterclockwise movement was observed as either the R decreased or the strain rate increased. This seemed to be analogous to that of a conventional elastomer (e.g., SBR), although the mechanisms are different in the two cases. From the R and C_clay dependences of the ultimate properties, three critical values of R were defined, where R showed a maximum strain at break, a steep increase in initial modulus, and onset of brittle fracture. Compared with NC gels, OR gels (chemically crosslinked hydrogels) showed similar but very small changes in their stress–strain curves on altering R, whereas LR (viscous PNIPA solution) showed a monotonic decrease (increase) in ε_b (E_i) with decreasing R. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2328–2340, 2009     

Upper- and lower-bound Hylleraas–CI calculations for the nonrelativistic Po states of the 4He isotope

Extensive Hylleraas–CI calculations for the lowest P^o states of ⁴He were performed. The dependence of the variational energy values E_κ on the mass parameter κ given by κ=m/m is discussed. Furthermore, lower bounds to E_κ were calculated using variance minimization. © 1998 John Wiley & Sons, Inc. Int J Quant Chem 66 : 25–30, 1998     

Kinetics and mechanisms of substitution reactions with sulfur-containing nucleophiles in aqueous acid solutions. I—rates of reactions of some tetrahalopalladate (II) anions with thiourea and selenourea

The activation energy parameters for the reaction of PdX (X=Cl^?, Br^?) in aqueous halide acid solution with thiourea (tu) and selenourea (seu) have been determined. High rates of reaction parallel low enthalpies and appreciable negative entropy of activation. The rate law in each case simplifies to k_obs=k[L] where L=tu or seu, and only ligand-dependent rate constants are observed at 25°C. The ligand-dependent rate constants for the first identifiable step in the PdCl + X system is (9.1±0.1) × 10³ M^?1 sec^?1 and (4.5±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively, while for the PdBr + X system it is (2.0±0.1) × 10⁴ M^?1 sec^?1 and (9.0±0.1) × 10⁴ M^?1 sec^?1 for X=tu and seu, respectively.     

Kinetics of oxidation of benzyl alcohol by sodium N-chloro-p-toluenesulfonamide

The kinetics of oxidation of benzyl alcohol and substituted benzyl alcohols by sodium N-chloro-p-toluenesulfonamide (chloramine-T, CAT) in HClO₄ (0.1–1 mol/dm³) containing Cl^? ions, over the temperature range of 30–50°C have been studied. The reaction is of first order each with respect to alcohol and oxidant. The fractional order dependence of the rate on the concentrations of H⁺ and Cl^? suggests a complex formation between RNCl^? and HCl. In higher acidic chloride solution the rate of reaction is proportional to the concentrations of both H⁺ and Cl^7hyphen;. The observed solvent isotope effect (k/k) is 1.43 at 30°C. The reaction constant (p = ?1.66) and thermodynamic parameters are evaluated. Rate expressions and probable mechanisms for the observed kinetics have been suggested.     

Chemical actinometry at 147.0 nm

Hexafluoroacetone (HFA) and O₂ were photolyzed at 147.0 nm to investigate their use in chemical actinometry. The products, CO for the former and O₃ in the latter case, were monitored. For accurate comparison, both of these substances were irradiated by a single light source with two identical reaction cells at 180° to each other. The light intensities I were measured under the same integrated as well as instantaneous photon flux based on ? and ?_CO (quantum yield) as 2 and 1, respectively. Optimum conditions for maximum product yield were 5.0 torr HFA pressure and an O₂ flow rate of 200 ml/min at 1 atm pressure for a 20-minute photolysis period. For light intensity variations between 1.09 × 10¹⁴ and 2.10 × 10¹⁵ photons absorbed/sec, the ratio I/I_HFA was found to be unity. Calibration with the commonly used N₂O actinometer for a ? value of 1.41 showed that I/I_HFA and I/I are unity. Both HFA and O₂ are suitable chemical actinometers at 147.0 nm with ?_CO and ? of 1 and 2, respectively. The light intensity determination in the first case involves the measurement of only one product which is noncondensible at 77°K, whereas wet analysis for O₃, the only product, in the second actinometer is necessary. Both of these determinations are quite simple and are preferable over product analysis in N₂O actiometry, wherein N₂ separation from other noncondensibles at 77°K is required.     

Steric Control of the Electronic Ground State in Six-Coordinate Copper(II) Complexes

Replacing the 3- and 3′′-protons of the ligand 2,6-di(pyrazol-1-yl)pyridine L by mesityl groups changes the electronic ground state of [Cu(L)₂]²⁺ complexes from {d}¹ to {d}¹. This is the best example so far for a “homoleptic” Jahn–Teller-compressed six-coordinate Cu^II complex.     

Synthesis,properties, and gas permeability of novel poly(diarylacetylene) derivatives

Poly(diphenylacetylene)s having various silyl groups are soluble in common solvents, from whose membranes poly(diphenylacetylene) membranes can be obtained by desilylation. The oxygen permeability coefficients of the desilylated polymers are quite different from one another (120–3300 barrers) irrespective of the same polymer structure. When bulkier silyl groups are removed, the oxygen permeability increases to larger extents. Poly[1-aryl-2-p-(trimethylsilyl)phenylacetylene]s are soluble in common solvents, and afford free-standing membranes. These Si-containing polymer membranes are desilylated to give the membranes of poly[1-aryl-2-phenylacetylene]s. Both of the starting and desilylated polymers show very high thermal stability and high gas permeability. 1-Phenyl-2-p-(t-butyldimethylsiloxy)phenylacetylene polymerizes into a high-molecular-weight polymer. This polymer is soluble in common organic solvents to provide a free-standing membrane. Desilylation of this membrane yields a poly(diphenylacetylene) having free hydroxyl groups, which is the first example of a highly polar group-carrying poly(diphenylacetylene). The P/P and P/P permselectivity ratios of poly(1-phenyl-2-p-hydroxylphenylacetylene) membrane are as large as 47.8 and 45.8, respectively, while keeping relatively high P of 110 barrers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5028–5038, 2006     

Generalized statistical gelation theory

Gel points in random polymerizations of the general type Σ_iRA + Σ_jRB in which A-groups react with A- and B-groups, and B-groups react only with A-groups are considered. (The symbols Σ_i and Σ_i signify that the A- and B-bearing reactants RA and RB can be mixtures of monomers of different functionalities, denoted generally as f_ai and f_bj.) The usual case of A-groups reacting only with B-groups is a special case of the present theory. The effects of chemical kinetics, the competitive reaction of A- and B-groups, are separated from the generalized statistical condition for gelation. The former are used to define reaction curves and the latter, gelation curves. Both types of curve are represented as p_a as a function of p_b. For a given polymerization, gelation occurs when the reaction curve and the gelation curve intersect. When A-groups react only with B-groups, the gel points are those for the usual type of Σ_iRA + Σ_jRB polymerization, and, in the limit of A-groups only reacting with A-groups, the gel points are those for Σ_iRA self polymerizations.     

Confusing Quantitative Descriptions of BrønstedLowry AcidBase Equilibria in Chemistry Textbooks – A Critical Review and Clarifications for Chemical Educators

In chemistry textbooks, the pK value of water in the solvent water at 25 °C is sometimes given as 14.0, sometimes as 15.7. This is confusing. The particular chemical reaction considered is the one in which water as Brønsted? Lowry acid reacts with water as Brønsted? Lowry base in water as solvent to yield equal concentrations of hydrated oxonium and hydroxide ions, H₃O⁺(aq) and HO^?(aq), respectively. This reaction is also known as the ‘self‐ionization’ of water for which the equilibrium constant is abbreviated as K_w with its known value of 10^?14.0 at 25 °C, i.e., pK_w(25 °C)=14.0. Identical values for pK and pK_w at a fixed temperature appear reasonable, since K and K_w refer to one and the same reaction. Therefore, reasons for the apparent disagreement between the ‘thermodynamically correct’ pK_a value for water (14.0 at 25 °C) and the value reported in most organic chemistry textbooks (15.7) should be discussed when teaching acid? base chemistry. There are good arguments for introducing, from the very beginning, the concepts of activity and thermodynamic standard states when teaching quantitative aspects of chemical equilibria. This also explains in a straightforward way why all thermodynamic equilibrium constants, including K_w, are dimensionless, and why pK(25 °C)=0.