Ionic liquid-modified silica as a new stationary phase for chromatographic separation

A new stationary phase based on silica modified with 1-methyl-3-propylimidazolium chloride was synthesized and characterized in this paper. A derivative of 1-methyl-3-propylimidazolium chloride was used to chemically modify the surface of silica particles to act as the stationary phase for HPLC. The modified particles were characterized by Fourier Transform Infrared (FT-IR), ¹³C NMR spectroscopy and thermogravimetric analysis (TGA). The surface modification procedure rendered particles with a surface coverage of 0.89 μmol/m² of alkylimidazolium chloride. Columns packed with the modified silica and blank silica particles were tested under HPLC conditions. Preliminary evaluation of the stationary phase for HPLC was performed using aromatic compounds as model compounds. The separation mechanism appears to involve multiple interactions including ion exchange, hydrophobic and electrostatic interactions.     

Thermodynamic data for divalent cations onto new modified glycidoxy silica surface at solid/liquid interface

Ethylenediamine molecule was chemically bonded on a silica gel surface previously anchored with 3-glycidoxypropyltrimethoxysilane. This new surface was employed to adsorb divalent cation from aqueous solutions at 298±1 K. The series of adsorption isotherms were adjusted to a modified Langmuir equation from data obtained by suspending the solid with MCl₂ (M=Cu, Ni, Zn and Co) solutions, which gave the maximum number of moles adsorbed as 1.54, 0.56, 0.45 and 0.36 mmol g^-1 for Cu, Ni, Co and Zn, respectively. Suspended aliquots of the chemically modified surface were calorimetrically titrated and the thermodynamic data showed the system is favored enthalpically and by free Gibbs energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluation of a Doubly Zirconized Silica-Based Stationary Phase for HPLC

This paper describes the preparation, characterization, and application of a chemically bonded and endcapped C18 stationary phase having a doubly zirconized silica support. The stationary phase was characterized using infrared and nuclear magnetic resonance (¹³C and ²⁹Si) spectroscopies, elemental analysis, and surface and thermogravimetric determinations, and evaluated chromatographically using several test mixtures, indicating acceptable efficiency, and asymmetry. The new phase was used for several different applications including the determination of the possible presence of six pesticides in orange juice, using a modified QuEChERS procedure for extraction.     

Evaluation of a Doubly Zirconized Silica-Based Stationary Phase for HPLC

This paper describes the preparation, characterization, and application of a chemically bonded and endcapped C18 stationary phase having a doubly zirconized silica support. The stationary phase was characterized using infrared and nuclear magnetic resonance (¹³C and ²⁹Si) spectroscopies, elemental analysis, and surface and thermogravimetric determinations, and evaluated chromatographically using several test mixtures, indicating acceptable efficiency, and asymmetry. The new phase was used for several different applications including the determination of the possible presence of six pesticides in orange juice, using a modified QuEChERS procedure for extraction.

     

Resolution of the Optical Isomers of Underivatisized Amino Acids on Chemically Bonded Chiral Phases by Ligand Exchange Chromatography

Abstract

A method for the direct separation of racemates by HPLC is described. A chiral stationary phase is synthesized, suitable for ligand exchange chromatography. L-proline is chemically bonded to silica gel via 3-glycidoxypropyltrimethoxysilane. The bonded support is loaded with Cu(II) ions as a complexing agent. Complete resolution of amino acid racemates can be obtained in less than ten minutes. α-values up to 3.5 are observed.     

A Study of the Retention Behaviour of Various Organometallic Complexes in HPLC Phase Systems

Abstract

The retention behaviour of various organometallic complexes in HPLC has been investigated. Three polar adsorbents (silica, a CN-bonded and a diol-bonded stationary phase) and a nonpolar adsorbent (C₁₈-bonded stationary phase) were used in this study for normal phase LC and reversed-phase LC respectively. The retention is influenced by the type of metal atom and the type of ligand in both types of LC. The study includes complexes of iron, ruthenium, cobalt, manganese, molybdenum and nickel with di-aza-butadiene and tetra-azadiene ligands. It was found that some ruthenium complexes are not eluted from bare and chemically modified silica.     

The Development of the In Situ Modification of 1st Generation Analytical Scale Silica Monoliths

Analytical scale silica monoliths are commercially limited to three column selectivities (bare silica, C8 and C18). An in situ modification is reported in detail to overcome this barrier and allow for any functionality of choice to be bonded to the silica surface of the monolithic stationary phase support. The modification method was conducted on a commercial bare silica column to bond the C18 moiety to the silica surface through a silylation reaction. The C18 type of stationary phase was chosen, as this is the most commonly bonded functionality for the majority of stationary phases used for high-performance liquid chromatography (HPLC) separations. The C18-modified monolith’s performance was compared to a commercial C18 monolithic and a particle packed column of the same analytical scale column dimensions (100 × 4.6 mm). The modified C18 monolith proved to be of high quality with an efficiency of 73,267 N m^?1, fast analysis times (operated at flow rates up to 3 mL min^?1 using a conventional 400 bar HPLC system) and improved resolution of a set of polar and non-polar substituted aromatics in comparison to a commercial C18 monolith.     

pi-Electron interaction of PAHs with anion-exchange silica gels modified with anionic metal-porphine and -phthalocyanine derivatives as HPLC stationary phase for preparative column in organic solvents

To develop easy-to-prepare stationary phases for HPLC, we investigated anion-exchange silica gels, Nucleosil 5SB (Nuc), modified with metal-porphines and -phthalocyanines (M-P). The modified silica gels (M-P_N) were evaluated for the availability as a stationary phase of HPLC for the separation of π-electron-rich polyaromatic hydrocarbons (PAHs) in polar and non-polar eluents. Separation ability of silica gels modified with Cu-phthalocyanine derivative (Cu-PCS_N) was comparable to that of the silica gels binding Cu-PCS through sulfonamide bonds; however, the latter requires troublesome procedures for the preparation. The PAHs tested interact with Cu-PCS_N in non-polar organic eluents through their π-electrons similarly as in the case of the PYE column^®, in which interaction with PAHs was reported to be only the π-π-electron interaction.     

Properties and Application of a Chelating Sorbent Prepared by Modification of LiChroprep-NH<Subscript>2</Subscript> with Calcon

A new chelating sorbent for metal ions was prepared by modification of chemically modified silica – LiChroprep-NH₂ with Calcon. The molecular mechanism of binding this reagent to the surface of the applied carrier is presented. The properties of this sorbent were compared to analogous sorbents with a plain silica carrier and chemically modified silicas – LiChroprep-RP containing Calcon. The advantages of the new sorbent compared to the silica and LiChroprep-RP chelating sorbents are demonstrated. The sorbent obtained was applied as stationary phase in solid-phase extraction (SPE) for separations of some chosen mixtures of metal ions and for additional purification of aqueous solutions of salts of alkali metals from trace amounts of heavy metals. The multiple use of the sorbent based on LiChroprep-NH₂ in sorption-desorption processes of metal ions without deterioration of its sorption capacity is demonstrated.     

Polyethyleneimine Immobilized on Silica Endcapped with Octadecyl Groups as a Stationary Phase for RP-LC

A new reversed stationary phase was prepared, based on thermal immobilization of trimethoxysilylpropyl modified polyethyleneimine onto silica particles endcapped with octadecyl molecules. The physicochemical and morphological properties of the stationary phase were characterized by solid state cross-polarization and magic angle spinning ²⁹Si nuclear magnetic resonance, infrared spectroscopy, porosimetry, and elemental analysis. For the studies on reversed phase high-performance liquid chromatography (HPLC) retention, separation of the established Tanaka and Engelhardt test mixtures was performed. The stationary phase showed a typical partition mechanism for the reversed phase; however, the low hydrophobicity required a low organic content solvent in the mobile phase for chromatographic separation of more hydrophobic compounds. The stationary phase also showed low residual silanol activity for the elution of basic compounds due to the protection offered by octadecyl endcapped molecules and the competition provided by the imine groups of the polymeric layer. The proposed stationary phase possesses interesting selectivity and is convenient for applications requiring the separation of more retentive compounds in conventional HPLC columns using more aqueous mobile phases.     

Chemically modified silica gel with aminothioamidoanthraquinone for solid phase extraction and preconcentration of Pb(II), Cu(II), Ni(II), Co(II) and Cd(II)

Silica gel chemically bonded with aminothioamidoanthraquinone was synthesized and characterized. The metal sorption properties of modified silica were studied towards Pb(II), Cu(II), Ni(II), Co(II) and Cd(II). The determination of metal ions was carried out on FAAS. For batch method, the optimum pH ranges for Pb(II), Cu(II) and Cd(II) extraction were ≥3 but for Ni(II) and Co(II) extraction were ≥4. The contact times to reach the equilibrium were less than 10 min. The adsorption isotherm fitted the Langmuir's model showed the maximum sorption capacities of 0.56, 0.30, 0.15, 0.12 and 0.067 mmol/g for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively. In the flow system, a column packed modified silica at 20 mg for Pb(II) and Cu(II), 50 mg for Cd(II), 60 mg for Co(II), Ni(II) was studied at a flow rate of 4 and 2.5 mL/min for Ni(II). The sorbed metals were quantitatively eluted by 1% HNO₃. No interference from Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ at 10, 100 and 1000 mg/L was observed. The application of this modified silica gel to preconcentration of pond water, tap water and drinking water gave high accuracy and precision (%R.S.D. ≤ 9). The method detection limits were 22.5, 1.0, 2.9, 0.95, 1.1 μg/L for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively.     

A Silica Monolithic Column with Chemically Bonded l-Pipecolic Acid as Chiral Stationary Phase for Enantiomeric Separation of Dansyl Amino Acids by CEC–MS

A silica monolithic column chemically modified with l-pipecolic acid as chiral stationary phase has been developed for chiral separation of dansyl amino acids by capillary electrochromatography–mass spectrometry (CEC–MS). The monolithic column was prepared by a sol–gel process and subsequent chemical modification by l-pipecolic acid as chiral selector with 3-glycidoxypropyltrimethoxysilane as spacer. Interestingly, it was found that the l-pipecolic acid-modified monolithic column can hold copper(II) ions tightly after loading Cu(II) ions during column preparation and conditioning and allows CEC separation to be conducted based on chiral ligand exchange with MS detection by a mobile phase without copper ions. It has been demonstrated that the chiral monolithic column operates well for enantioseparation of several dansyl amino acids by CEC–MS.

     

Synthesis,characterization and solid‐phase extraction properties of novel bis(diazo‐azomethine) ligands supported on mesoporous silica

The novel mesoporous silica‐supported bis(diazo‐azomethine) compounds have been synthesized and characterized successively. In the first step, 1,3‐phenylenedimethanamine and 4,4′‐diaminodiphenylmethane were diazotized, and the obtained bis(diazonium) cations were coupled with 2,4‐dihydroxybenzaldehyde. The synthesized bis(diazo‐carbonyl) compounds, 5,5′‐((1,3‐phenylenebis(methylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A1) and 5,5′‐((methylenebis(4,1‐phenylene))bis(diazene‐2,1‐diyl))bis(2,4‐dihydroxybenzaldehyde) (A2) were chemically supported on amino‐modified silica‐gel (as L1 and L2). Elemental analysis, liquid chromatography‐mass spectroscopy, liquid‐phase NMR (¹H and ¹³C) and solid‐phase NMR (CP‐MAS ²⁹Si and ¹³C), FT‐IR, TG/DTA, scanning electron microscopy and energy‐dispersive X‐ray spectroscopy techniques were used for characterizations of all the synthesized compounds. The syringe and batch techniques were applied for the solid‐phase extraction properties of Pb(II), Cu(II), Cd(II) and Cr(III) ions using an inductively coupled plasma‐atomic emission spectroscopy instrument. The recoveries of Pb(II), Cu(II), Cd(II) and Cr(III) ions have been achieved to 95–99% with the (RSDs) of ± 2–3% in optimum conditions.     

Determination of the two-phase equilibrium constants of copper(II)-modified silica gels used in liquid chromatography

Silica gels modified with copper(II) are currently used in ligand-exchange liquid chromatography. The main species present at the surface of the stationary phase is shown to be (SiO)₂Cu(NH₃)₂(H₂O)_x. Measurements of the ammonia concentration in the mobile and stationary phases are combined with computer-assisted calculations to determine the following apparent equilibrium constants: for SiOH + NH₃ ? SiO^?NH⁺₄, log K = ?0.2; for (SiO)₂Cu + NH₃ ? (SiO)₂Cu(NH₃), log β₁ = 2.8; and for (z.tbnd;SiO)₂Cu + 2NH₃ ? (SiO)₂Cu(NH₃)₂, log β₂ = 4.0. A distribution diagram of the different species present at the surfac of copper-modified silica gel is given. Under the usual operating conditions for ligand-exchange chromatography (pNH₃ < 1), more than 60% of the silanol groups which fix copper(II) have a silicate structure with two moles of ammonia per mole of copper(II).     

Preparation and characterization of a new HPLC C18 reversed phase containing thiocarbamate groups

A HPLC stationary phase that possesses an internal thiocarbamate functional group is described. The new C18-thiocarbamate silane was synthesized by the reaction of a trifunctional alkoxysilane with a mercaptan. The silylant agent was bonded to silica (5 μm) and the new stationary phase was then endcapped. Surface characteristics of the packing before and after chemical modification with HMDS and TMCS were determined by different physico-chemical methods, such as elemental analysis and infrared and solid-state ¹³C and ²⁹Si nuclear magnetic resonance spectroscopies. Chromatographic properties of the C18-thiocarbamate silica were evaluated under reversed phase conditions by separation of four different test mixtures that including compounds from the Engelhardt, Tanaka, and Neue test mixtures. Chromatographic evaluations of the C18-thiocarbamate phase show promising results for the separation of basic analytes.     

Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Direct TLC Resolution of the Enantiomers of Three β-Blockers by Ligand Exchange with Cu(II)–l-Amino Acid Complex, Using Four Different Approaches

TLC experiments have been performed to resolve the enantiomers of three β-blockers by complexation chiral TLC with Cu(II) cation and five l amino acids. Loading was carried out by using the Cu(II)–l amino acid complex as chiral mobile phase additive with untreated silica gel plates; by mixing the Cu complex with silica gel before preparing the TLC plates; by ascending development of untreated plates with solutions of the Cu complex; and by using a solution of Cu(II) acetate as mobile phase additive for plates prepared by mixing the l amino acid with silica gel. Spots were located by use of iodine vapour.     

Preconcentration of transition metal ions from ethanol solution onN-acyl-N′-benzoylthiourea — Modified silica gel

Silica gel was chemically modified with anN-acyl-N-benzoylthiourea group. This material behaved as a selective means of preconcentrating Cu(II), Zn(II) and Cd(II) from ethanol by the column technique. Ethanolic solutions having 6 mol of the metal ions were percolated through the column and retentions of 100% were achieved for all metals. Zinc and copper were eluted quantitatively from the column bed with 5mL of ethanolic O.1molL^–1 (for Zn) and 0.9 mol L^–1 (for Cu) citric acid. Cadmium was recovered totally with 60 mL of ethanolic 2.0 mol L^–1 citric acid. The modified silica was shown to be chemically stable after various adsorption-elution cycles (at least twenty).     

Cyclam complexes of Cu(II) and Co(II) as stationary phases for gas chromatography

New macrocyclic stationary chemically bonded phases were synthesized and tested in gas chromatography conditions. The complexes of 1,4,8,11-tetraazacyclotetradecane with Cu(II) and Co(II) were bonded to the silica support through the (3-chloropropyl)triethoxysilane reactant. The packings obtained were analyzed by diffuse-reflectance ultraviolet–visible spectroscopy (DRUV–Vis), differential thermal gravimetry (DTG), porosimetry, and elementary analysis. Preliminary study of the novel silica gas chromatography (GC) stationary phases containing cyclam complexes was carried out using packed 1/8 in. i.d. columns. The study was conducted on: cyclic, linear and branched olefins, aromatic hydrocarbons and ethers. Characterization of interactions between the compounds mentioned and new stationary phases was based upon analysis of Kováts retention indices (I), difference between retention indices for two phases (ΔI), and molecular retention indices (ΔM_e). Results have shown that the new stationary phases interact sufficiently strongly with molecules of high electron density and can be applied in capillary gas chromatography for the analysis of light hydrocarbons.     

A new single‐urea‐bound 3,5‐dimethylphenylcarbamoylated β‐cyclodextrin chiral stationary phase and its enhanced separation performance in normal‐phase liquid chromatography

A new single‐urea‐bound chiral stationary phase based on 3,5‐dimethylphenylcarbamoylated β‐cyclodextrin was prepared through the Staudinger reaction of mono (6^A‐azido‐6^A‐deoxy)‐per(3,5‐dimethylphenylcarbamoylated) β‐cyclodextrin and 3‐aminopropyl silica gel under CO₂ atmosphere. The new phase exhibited good enantioseparation performance for 33 analytes using normal‐phase HPLC conditions; 19 of them were baseline separated. Effects of structure of analytes, alcoholic modifiers, and acidic/basic additives on separation performances of this new cyclodextrin chiral stationary phase have been studied in detail. The results showed that the retention and resolution of acidic and basic analytes on the CSP were greatly affected by the additives. Peak symmetry for some analytes could be improved by simultaneously adding acidic and basic additives to the mobile phase. This work expands the potential applications of the cyclodextrin‐based chiral stationary phases in the normal‐phase HPLC.