The performance of various capillary columns for the analysis of volatile flavor compounds in dairy products by dynamic headspace gas chromatography

The aim of this study was to test the suitability and performance of various stationary phases and column dimensions for dynamic headspace gas chromatography of food aromas. The trials were performed using an aqueous test mixture containing thirty seven volatile flavor components of intense aroma, and a sample of ripe Swiss Emmental cheese. The best performance with both samples was obtained with a capillary column coated with a thick film of polydimethylsiloxane. This column resolved the greatest number of compounds in the cheese sample and resulted in the overlapping of one pair of peaks only from the test mixture. Because of its other advantages, i. e. high capacity owing to its film thickness, and insensitivity to the high moisture content of some samples or traces of oxygen in the carrier gas, the polydimethylsiloxane column appears suitable for the analysis of the volatile and highly polar compounds present in complex mixtures such as food aroma.     

Autoxidation of poly-4-methylpentene-1. I. The role of diffusion in autoxidation kinetics

An apparatus is described for the measurement of oxygen uptake into a polymer sample at constant oxygen pressures in the range 20–1000 mm Hg. Measurements of the rate of oxygen uptake into poly-4-methylpentene-1 show that the rate is accurately first-order in oxygen pressure over the range 50–800 mm pressure for temperatures ranging from 122 to 154°C and film thickness in the range 0.001–0.025 cm. A theoretical treatment of the kinetics of a reaction in which oxygen diffuses into both faces of a thin film, in which it is consumed by a first-order reaction shows that the oxidation rate ρ per unit area of film surface is given by ρ = ρ_∞ tanh ßL/2 where ρ_∞ is the limiting oxidation rate for a thick film, L is the film thickness, and ß = (k/D)^1/2, k being the oxidation rate constant and D the diffusion constant. Values of D and the activation energy for diffusion calculated from autoxidation data are in good agreement with values determined directly.     

Relationship between the functional group concentrations and the infrared reflection–absorbance of polyacrylonitrile films

The optical constants n and k of polyacrylonitrile (PAN) were determined in the infrared region 3100–700 cm^?1 by using theoretical calculations and experimental reflectance spectra. Tests of the validity of the results obtained showed excellent agreement between the measured and the predicted k values. One k value was determined experimentally (k = 0.6155 at V = 2285 cm^?1) and showed excellent agreement with that calculated theoretically (k = 0.6153). The p-polarized light was found to be more sensitive than the s-polarized light to the absorbance of PAN films at 77° incidence angle. This sensitivity increased rapidly with p-polarized light for film less than 0.5 μm thick. From the optical constants obtained for p-polarized light at 77° angle of incidence, the sensitivity of the infrared reflection-absorbance (IR-RA) measurements to changes in the functional group concentrations in PAN films was determined for film thicknesses in the region 0.01-10.0 μm. The IR-RA measurements of the ? C?N group and the skeletal mode were for a PAN film thickness of about 0.1 μm.     

GC with LC-like packed capillary columns

Capillary columns of 0.3–0.35 mm internal diameter and 0.3–7.7 m length, packed with 3 to 30 μm octadecylsilica stationary phases as used for liquid chromatography, were applied to gas chromatographic separation of low boiling hydrocarbons. Van Deemter plots for these columns showed the optimum column efficiency to occur at linear velocities of 4–5 cm/s. A short column was applied to the rapid separation of components of a natural gas and impurities in standard gases, while a long column was applied to the separation of complex mixtures.     

Monte Carlo Simulations of the Morphologies and Conformations of Triblock Copolymer Thin Films

Summary: The morphologies and conformations of triblock copolymer (ABA and ABC) thin films confined between two identical walls were investigated by Monte Carlo simulation using bond length fluctuation and cavity diffusion algorithm on cubic lattice. Effects of the wall‐block interactions, copolymer chain composition and film thickness on morphologies, as well as on the fraction of chain “bridge” conformation f_bridge are presented in detail. In ABA thin film, column, parallel, perforated and perpendicular lamellas were discriminated, furthermore, the transition of morphology and the variation of f_bridge of ABA film along with the increase of thickness were revealed. In ABC thin film, lamella especially perpendicular lamella morphologies are predominant in varying the wall‐block interactions and the thickness. The results are consistent with some theoretical predictions such as DDFT and simulations reported in literature.

Isodensity profile of A₅B₅A₅ thin film.     

Characterization of polymer monolithic stationary phases for capillary HPLC

Monolithic capillary columns have been prepared in fused‐silica capillaries by radical co‐polymerization of ethylene dimethacrylate and butyl methacrylate in the presence of porogen solvent mixtures containing various concentration ratios of 1‐propanol, 1,4‐butanediol, and water with azobisisobutyronitrile as the initiator of the polymerization reaction. The through pores in organic polymer monolithic columns can be characterized by “equivalent permeability particle size”, and the mesopores with stagnant mobile phase by “equivalent dispersion particle size”. Increasing the concentration of propanol in the polymerization mixture diminishes the pore volume and size in the monolithic media and improves the column efficiency, at a cost of decreasing permeability. Organic polymer monolithic capillary columns show similar retention behaviour to packed alkyl silica columns for compounds with different polarities characterized by interaction indices, I_x, but have different methylene selectivities. Higher concentrations of propanol in the polymerization mixture increase the lipophilic character of the monolithic stationary phases. Best efficiencies and separation selectivities were found for monolithic columns prepared using 62–64% propanol in the porogen solvent mixture. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra‐column contributions.     

Thermolysis of 3-methyl-3-(o-aryl)-1,2-dioxetanes: Activation parameters and chemiexcitation yields

3-Methyl-3-(o-tolyl)-1,2-dioxetane 1 and 3-methyl-4-(o-bromophenyl)-1,2-dioxetane 2 were synthesized in low yield by the β-bromo hydroperoxide method. The activation parameters were determined by the chemilumin-escence method (for 1 ΔG^? = 24.7 ± 0.3 kcal/mol, ΔH^? = 25.4, ΔS^? = + 1.9 e.u., k₆₀ = 3.4 × 10^?4s^?1; for 2 ΔG^? = 24.7 ± 0.4 kcal/mol, ΔH^? = 24.7, ΔS^? = 0.0 e.u., k₆₀ = 4.1 × 10^?4s^?1). Thermolysis of 1–2 directly produced high yields of excited triplets as expected for this type of dioxetane [triplet chemiexcitation yields (?⁷) for 1 0.03; for 2 0.02; the ?^T/?^S ratios were estimated to be approximately 200 for both compounds]. The effect of ortho-aryl substituents was inconsistent with electronic effects. The ortho substitution in 1–2 resulted in a marked increase in stability of the dioxetanes. The results are discussed in relation to a diradical-like mechanism.     

1,3‐Dipolar Cycloaddition of Diazo Compounds to Electron‐Deficient Alkenes: Kinetics and Mechanism of Formation of Dimethyl‐4,5‐dihydro‐1H‐pyrazol‐3,5‐dicarboxylate

1,3‐Dipolar cycloaddition of methyl diazoacetate to methyl acrylate was investigated by kinetic ¹Н NMR spectroscopy. It was established that the mechanism of the process includes parallel formation of trans‐ and cis‐dimethyl‐4,5‐dihydro‐3H‐pyrazol‐3,5‐dicarboxylates as a result of [3 + 2]‐cycloaddition of methyl diazoacetate to methyl acrylate; the corresponding rate constants were denoted k_1t and k_1c. The reaction rate of the isomerization of 3Н‐pyrazolines to 4,5‐dihydro‐1H‐pyrazol‐3,5‐dicarboxylate (3Н → 1Н‐pyrazoline rearrangement) was found to be sensitive to both the methyl acrylate (k_2t, k_2c) and 1Н‐pyrazoline concentrations (k_3t, k_3c). Kinetic analysis showed that the proposed scheme is valid for various reagent concentrations. The numerical solution of the system of differential equations corresponded to the reaction scheme and was used to determine the complete set of reaction rate constants (k (× 10⁵ M^–1·s^–1), 298 K; solvent, benzene‐d₆): k_1t = 2.3 ± 0.3, k_1c = 1.6 ± 0.2, k_2t = 1.1 ± 0.3, k_2c = 1.8 ± 0.5, k_3t = 1.2 ± 0.4, k_3c = 2.2 ± 0.7.     

Improved congener-specific GC analysis of chlorobiphenyls on coupled CPSil-8 and HT-5 columns

The congener-specific analysis of polychlorinated biphenyls (PCB) by high resolution gas chromatography on a 50 m × 0.25 mm fused silica column coated with a 0.26 μm film of 5% diphenyl polydimethylsiloxane (CPSil-8) has been significantly improved by series coupling with a 25 m × 0.22 mm column coated with a 0.10 μm film of 1,2-dicarba-closo-dodecarborane polydimethylsiloxane (HT-5). Using helium as carrier gas, a total of 64 congeners in technical PCB mixtures could be analyzed as resolved peaks by ECD (86 by MS) with the CPSil-8 column, and 84 by ECD (108 by MS) with the combination. The high upper temperature limit for these stationary phases (>300°C) enabled fast temperature programming and rapid analysis (60 min).     

Considerations of speed and efficiency in capillary gas chromatography

The analysis time for a given resolution is a complex function of stationary phase selectivity, column radius, and thickness of the stationary phase film. Variation of these parameters has a large effect not only on analysis time, but also on the column inlet pressure and other instrumental requirements. The minimum amount that can be reliably detected as well as the maximum sample capacity of a column are strongly related to the selected column dimensions.     

Reproducibility of retention indices measurement of alkylbenzenes on crosslinked methyl silicone phase fused silica capillaries

Summary Reproducibility of the Kovats retention indices of alkylbenzenes was studied on conventional “PONA” fused-silica capillary columns coated with crosslinked dimethyl silicone phase, with a film thickness of 0.5 μm. The data were compared with those obtained on conventional OV-101 columns. The tested PONA columns showed reproducible chromatographic properties, capacity ratios and high efficiencies. Having a standard deviation of s=0.03 i.u. of the retention indices on a single column, the column-to-columns differences were found to be up to 0.3 i.u. Higher indices were determined for crosslinked columns, the difference being in most cases about one i.u.     

Error minimization in the envelope method for the determination of optical constants of a thin film

The algorithm for the determination of optical constants of a weakly absorbing thin film from the envelope method has been modified to minimize the error in the estimated values of extinction coefficient (k) as a function of wavelength. The refinement procedure is based on an extension of interference order adjustment method used for improving the estimated values of film thickness d and wavelength‐dependent refractive index n from the envelope method. The proposed modification when applied to a hypothetical as well as an experimental film is found to work well over a wide spectral region. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermolysis of disubstituted 1,2-dioxetanes: Activation parameters and chemiexcitation yields

trans-3-Methyl-4-(p-anisyl)-1,2-dioxetane 1, trans-3-methyl-4-(o-anisyl)-1,2-dioxetane 2 , 3-methyl-3-benzyl-1,2-dioxetane 3 , and 3-methyl-3-p-methoxybenzyl-1,2-dioxetane 4 were synthesized in low yield by the β-bromo hydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔG≠ = 22.8 ± 0.3 kcal/mol, Δ≠ = 22.2, ΔS≠ = −1.7 e.u., k₆₀ = 7.6 × 10⁻³s⁻¹; for 2 ΔG≠ + 23.6 ± 0.3 kcal/mol, ΔH≠ = 22.8, ΔS≠ = −2.2 e.u., k₆₀ = 2.5 × 10⁻³S⁻¹; for 3 ΔG≠ = 24.0 ± 0.4 kcal/mol, ΔH≠ = 23.1, ΔS≠ = −2.7 e.u., k₆₀ = 1.2 × 10⁻³S⁻¹; for 4 ΔG≠ = 24.0 ± 0.2 kcal/mol, ΔH≠, = 23.2, ΔS≠, = −2.4 e.u., k₆₀ = 1.2 × 10⁻³s⁻¹). Thermolysis of 1–4 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) [chemiexcitation yields ϕ^T, ϕ^S, respectively: for 1 0.02, 0.0001; for 2 0.02, 0.0001; for 3 0.03, 0.0002; for 4 0.02, 0.0001]. The effect of paramethoxyaryl substitution was consistent with electronic effects. The ortho substitution in 2 resulted in an increase in stability of the dioxetane, opposite that observed for an electronic effect. The results are discussed in relation to a diradical-like mechanism.     

Analysis of Rotenoids by High Temperature High Resolution Gas Chromatography-Mass Spectrometry

A short glass capillary column coated with PS-090 (20% phenyl–80% methylpolysiloxane, of 10 m × 0.30 mm i.d.; with 0.1 μm film thickness) was used to analyze samples from Tephrosia candida; eighteen rotenoids were separated and identified without derivatization by HT-HRGC and HT-HRGC-MS. The mass spectra show the typical fragmentation pattern for rotenoids, with the base peaks either at M⁺, or originating from RDA (Retro Diels-Alder) rearrangements. HT-HRGC and HT-HRGC-MS were shown to be extremely valuable and neglected techniques for structural studies as well as the routine analysis of rotenoids in crude extracts. Possible applications to other classes of aromatic natural products, e.g. flavonoids, are envisaged.     

Effect of film thickness controlled by ink‐jet printing method on the optical properties of an electroluminescent polymer

Ink‐jet printing (IJP) represents a highly promising liquid processed polymer deposition method for the film preparation of functional polymers in photo‐electronic devices. In this report, the results on the IJP of a fluorene‐based electroluminescent polymer, poly(9,9‐dihexylfluorene‐alt‐2,5‐dioctyloxybenzene) (PF6OC8), from a piezoelectric droplet generator are presented. The polymer film thickness has been found to show an approximate linear relation with the number of droplets per unit area; it is thus convenient to control the film thickness by the space of printed dots in IJP process. In comparison, spin coating approach is also used to prepare polymer films with different thicknesses by varying solution concentration and spinning speed. However, it is found that spin coating is difficult to control the film thickness quantitatively. The influence of film thickness on the photoluminescence (PL) properties of PF6OC8 films prepared by IJP and spin coating is comparatively investigated. For both ink‐jet printed and spin coated films, the intensity of PL spectra first increases and then decreases with increase in the film thickness, probably due to the exciton quenching in thicker films. When the polymer film thickness is at nanoscale, the major peak in the PL spectrum is the 0–0 vibronic emission at about 420 nm, and with increase in the film thickness, the 0–1 vibronic peak at about 440 nm becomes dominant. The red‐shifted PL spectra with increase in film thickness show the change from the 2D exciton state to the 3D one. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetics and mechanism of the aminolysis of O-ethyl S-aryl dithiocarbonates in acetonitrile

The aminolysis reactions of O-ethyl S-(Z-phenyl) dithiocarbonates (Z=p-CH₃, H, p-Cl, and p-NO₂) with anilines (AN) and N,N-dimethylanilines (DMA) in acetonitrile at 30.0°C are investigated. Relatively small values of β_X (β_nuc,0.4 ca. 0.7) and β_Z (β_lg −0.1 ca. −0.4) for both ANs and DMAs, significantly large k_H/k_D values (1.1 ca. 1.9) involving deuterated anilines, and large negative ρ_XZ values for ANs (−0.56) are interpreted to indicate a concerted mechanism for both ANs and DMAs but with a hydrogen bonded four-center type transition state (TS) for ANs. The relative leaving ability, k(Z=p-NO₂)/k(Z=p-CH₃), is smaller for ANs than for DMAs, especially for a weaker nucleophile (1.9 and 4.7 for AN and DMA, respectively, with X=p-Cl). This suggests that the rate enhancement by the hydrogen-bond formation in the four-center type TS for AN is greater for a weaker nucleofuge (Z=p-CH₃), especially when the nucleophile (X=p-Cl) is weaker. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 419–423,1998     

Large Volume Injection in Fast Gas Chromatography with On‐Column Injector

In this work a fast gas chromatography set‐up with on‐column injection was optimized and evaluated with a model mixture of C₈–C₂₈ n‐alkanes. Usual injection volumes when using narrow‐bore (e. g., 0.1 mm i.d.) analytical columns are ca. 0.1 μL. The presented configuration allows introduction of 10–30‐fold larger sample volumes without any distortion of peak shapes. In the set‐up a normal‐bore retention gap (1 m×0.32 mm i. d.) was coupled to a narrow‐bore (4.8 m×0.1 mm i. d.×0.4 μm film thickness) analytical column using a low dead volume column connector. The effects of the experimental conditions such as inlet pressure, sample volume, initial injection temperature, and oven temperature on a peak focusing are discussed. H‐u curves for helium and hydrogen are used to compare their suitability for high speed gas chromatography and to show the dependence of separation efficiency on the carrier gas velocity at high inlet pressures. In the fast gas chromatography system a baseline separation of C₁₀–C₂₈ n‐alkanes was achieved in less than 3 minutes.     

Simultaneous determination of NG‐monomethyl‐l‐arginine,NG,NG‐dimethyl‐l‐arginine,NG,NG′‐dimethyl‐l‐arginine,and l‐arginine using monolithic silica disk‐packed spin columns and a monolithic silica column

We have developed and validated a high‐performance liquid chromatography method that uses monolithic silica disk‐packed spin columns and a monolithic silica column for the simultaneous determination of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, and N^G,N^G′‐dimethyl‐l ‐arginine in human plasma. For solid‐phase extraction, our method employs a centrifugal spin column packed with monolithic silica bonded to propyl benzenesulfonic acid as a cation exchanger. After pretreatment, the methylated arginines are converted to fluorescent derivatives with 4‐fluoro‐7‐nitro‐2,1,3‐benzoxadiazole, and then the derivatives are separated on a monolithic silica column. l ‐Arginine concentration was also determined in diluted samples. Standard calibration curves revealed that the assay was linear in the concentration range 0.2–1.0 μM for methylated arginines and 40–200 μM for l ‐arginine. Linear regression of the calibration curve yielded equations with correlation coefficients of 0.999 (r²). The sensitivity was satisfactory, with a limit of detection ranging from 3.75 to 9.0 fmol for all four compounds. The RSDs were 4.3–4.8% (intraday) and 3.0–6.8% (interday). When this method was applied to samples from six healthy donors, the detected concentrations of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, N^G,N^G′‐dimethyl‐l ‐arginine and l ‐arginine were 0.05 ± 0.01, 0.41 ± 0.07, 0.59 ± 0.11, and 83.8 ± 30.43 μM (n = 6), respectively.     

Factors influencing chromatographic data in fast gas chromatography with on‐column injection

The use of larger volume injection with on‐column injection and fast GC commercial instrumentation was evaluated with the model mixture of n‐alkanes of a broad range of volatility (C₁₀–C₂₈). The presented configuration allows introduction of 40–80‐fold larger sample volumes without any distortion of peak shapes compared to “usual” fast GC set‐ups using narrow‐bore columns. A normal‐bore retention gap (1–5 m×0.32 mm ID) was coupled to a narrow‐bore (5 m×0.1 mm ID×0.4 μm film thickness) analytical column using a standard press‐fit connector. The connection was tight and reliable, and hence suitable for hydrogen as carrier gas. The effect of pre‐column and analytical column connector, injection volume, pre‐column length, column inlet pressure, and analyte volatility on peak shape, peak broadening, and focusing are discussed. The precision of chromatographic data measurements and peak capacity under optimised temperature programmed conditions for fast separations with large volume injection were found to be very good. The presented fast GC set‐up with on‐column injection extends the applicability of the technique to trace analysis.     

Potentiostatic preparation of poly-1,3-dimethoxybenzene films. Kinetics and bilayer structure

The anodic oxidation of 1,3-dimethoxybenzene (MDMB) on a platinum electrode in non-aqueous tetrabutylammonium perchlorate (TBAP) + acetonitrile solutions begins at 1100 mV. Under polarization at constant potential a polymer film is formed at potentials above than 1700 mV. The empirical kinetics of the formation and growth of this film were investigated using microgravimetry and coulometry. Under all experimental conditions the polymerization rate R_p changes after 10 s of polarization, and this behavior can be described by the empirical equationsR_p = k[MDMB]^0.3[TBAP]^0.4t_pol <10sR′_p = k′[MDMB]^0.9[TBAP]^0.5t_pol 10 s The apparent activation energy is 25 ± 1 kJ mol⁻¹ in both cases. The electrogenerated polymer film has a bilayer structure: a inner compact adherent golden layer, and an outer powdery brown layer.