加压毛细管电色谱法分离测定麻仁润肠丸中的木香烃内酯和去氢木香烃内酯

建立了利用反相加压毛细管电色谱技术对麻仁润肠丸中木香烃内酯和去氢木香烃内酯分离检测的方法。采用C18毛细管色谱柱,柱温为25℃,流动相为20 mmol/L Na H2PO4:乙腈=20:80(V/V),流动相总流速为0.04 m L/min,电压为2 k V,检测波长为230 nm。采用等度洗脱,木香烃内酯和分离检测去氢木香烃内酯实现快速分离,峰面积的相对标准偏差(RSD)≤4.5%,回收率为96.5%~104.5%。     

加压毛细管电色谱分离检测升麻中阿魏酸与异阿魏酸

采用反相加压毛细管电色谱技术,建立了阿魏酸与异阿魏酸分离分析方法。采用EP-100-20/45-3-C18色谱柱,流动相为20 mmol/L Na H2PO4(p H 7)-乙腈(80∶20,V/V),泵流速为35μL/min,分离电压-3 k V,检测波长为320 nm。阿魏酸与异阿魏酸在9 min内实现快速分离,峰面积的相对标准偏差(RSD)均小于3%,检出限分别为11.49和10.98μg/L。方法可用于升麻中两种主要有效成分的检测。     

高效液相色谱-串联质谱法同时测定粉条中6种人工合成色素

建立了粉条中人工合成色素的高效液相色谱-串联质谱(HPLC-MS/M S)检测方法。样品经乙醇-水(2:3,V/V)提取后,聚酰胺柱富集净化,C18色谱柱分离,MS/MS多反应监测(MRM)测定红薯粉条中亮蓝、柠檬黄、日落黄等6种人工合成色素。方法检出限为0.001 mg/kg,回收率为79.9%~98.4%,相对标准偏差(RSD)在0.79%~5.9%。     

液相色谱法测定果蔬汁中柠檬黄和日落黄方法优化

对液相色谱法测定果蔬汁中柠檬黄和日落黄进行了方法优化,对色谱条件进行了调整,采用ODS-C18型(250 mm×4.6 mm)色谱柱,流动相甲醇-0.02 mol/L乙酸铵(体积比40∶60,pH4),流速为0.6 mL/min。采用紫外检测器,柠檬黄检测波长为430 nm,日落黄检测波长为510 nm。该方法测定结果的相对标准偏差为柠檬黄1.3%(n=4)、日落黄2.3%(n=4)。柠檬黄和日落黄的平均回收率分别为84.17%、88.33%。该法满足实验要求。     

加压毛细管电色谱分离检测中药厚朴中和厚朴酚与厚朴酚

采用反相加压毛细管电色谱技术,建立了一种快速、简便的中药厚朴中和厚朴酚与厚朴酚的分离分析方法。采用EP-100-20/45-3-C18色谱柱,流动相为20 mmol/L NaH2PO4-乙腈(10∶90,V/V),泵流速为0.035mL/min,分离电压为-2kV,检测波长为254nm。优化条件下和厚朴酚与厚朴酚在7min内可实现快速分离,其峰面积的相对标准偏差(RSD)均小于3%,检出限分别为0.59、0.53μg/mL。该方法样品和试剂用量少、灵敏度高、重现性好,可用于中药材厚朴中和厚朴酚、厚朴酚的分离检测。     

HPLC同时检测食品接触材料中三聚氰胺与三聚氰酸单体迁移量

建立了一种用液相色谱技术检测分析食品接触材料中三聚氰胺与三聚氰酸单体迁移量的方法.样品采用水、4%乙酸和10%乙醇3种模拟物进行浸泡.色谱分离采用Phenomenex Luna NH2柱,柱温:30 ℃,流动相为乙腈-5 mmol/L,pH=6.5 PBS缓冲溶液(75∶25,V/V),流速1.0 mL/min,DAD...     

高效液相色谱法测定保健食品和饮料中的阿斯巴甜

建立了保健食品和饮料中的甜味剂阿斯巴甜的高效液相色谱快速测定方法.固体样品用纯水超声提取;饮料样品超声脱气.取适量提取液或饮料样品,经0.45 μm滤膜过滤后,取20 μL进样色谱柱分析.色谱条件:分离柱为C18柱(250mm×4.6 mm i.d.,10μm),柱温35℃,流动相为V(10 mmol/L KH2PO4,pH 3.50):V(乙腈)=80:20,流速1 mL/min,检测波长210 nm.本法线性范围为0～16 μg,最低检出量为0.0024 μg,回收率为92.3%～102%.相对标准差小于1.6%.本法准确度和精密度均能满足保健食品和饮料中阿斯巴甜测定的要求.     

加压毛细管电色谱测定葛根中三种异黄酮类化合物

建立了加压毛细管电色谱(pCEC)检测葛根中异黄酮类化合物葛根素、大豆苷、大豆苷元的方法。采用C18毛细管色谱柱,以NaH2PO4缓冲盐水溶液和甲醇为流动相,优化流动相比例、流动相流速、NaH2PO4缓冲盐水溶液浓度和pH、分离电压等色谱条件。结果表明,在流动相为17.5 mmol/L NaH2PO4缓冲盐水溶液(pH 4.0):甲醇=55:45(V/V),分离电压3 kV,流动相流速80μL/min,检测波长250 nm的条件下,葛根素、大豆苷、大豆苷元质量浓度在200～1000μg/mL范围内线性关系良好,相关系数在0.9960～0.9982之间,平均回收率在98.6%～100.9%之间,RSD为3.1%～3.5%之间。该方法已用于葛根中异黄酮类物质的分离检测。     

加压毛细管电色谱在芎菊上清片中栀子苷及黄芩苷分离检测中的应用

采用加压毛细管反相电色谱技术,建立了一种用于分离检测芎菊上清片中栀子苷和黄芩苷的高效简便新方法。色谱柱为EP-100-20/45-3 C18毛细管柱(总长度45 cm,有效长度20 cm,直径为100μm,ODS填料内径3μm),柱温为25℃,流动相采用20 mmol/L Na H2PO4-乙腈(71∶29),流动相的总流速为0.035m L/min,分离电压为+2.0 k V,检测波长为240 nm。经等度洗脱,栀子苷和黄芩苷可实现快速分离,峰面积的相对标准偏差(RSD)不大于2.8%,回收率为91.9%~101.2%,测得该芎菊上清片中栀子苷的含量为2.616 mg/g,黄芩苷的含量为11.220 mg/g。该方法的选择性好、柱效高、试剂用量少,用于芎菊上清片中黄芩苷和栀子苷的分离检测,结果满意。     

固相萃取-毛细管气相色谱法测定枇杷花中有机氯农药残留量

建立了枇杷花中有机氯类农药残留量的固相萃取-毛细管气相色谱(SPE-CGC)分析方法。对采自福建蒲田等12地的枇杷花中六六六(4种异构体)、滴滴涕(4种异构体)、五氯硝基苯共9种有机氯农药的残留量进行了测定。样品采用丙酮超声波提取,浓缩后过Florisil固相萃取小柱净化,洗脱剂为V(正己烷)∶V(丙酮)100∶1。用DB-1701弹性石英毛细管气相色谱柱分离样品,微电子捕获检测器进行检测。9种有机氯农药的峰面积与其质量浓度均有良好的线性关系,相关系数均大于0.999,最低检测限为0.016~0.125μg/L,样品的加标回收率为85.4%~106.9%,相对标准偏差为1.8%~9.8%。该方法能够满足农药残留检测的要求。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).